enum sas_class prob would have been useful if function sas_show_class() was
ever implemented, which it wasn't.
enum sas_class is used as asd_sas_port.class and asd_sas_phy.class, which
are only ever set, so delete these members and the enum.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230815115156.343535-3-john.g.garry@oracle.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
struct asd_sas_phy *sas_phy = &phy->sas_phy;
sas_phy->enabled = 1;
- sas_phy->class = SAS;
sas_phy->iproto = SAS_PROTOCOL_ALL;
sas_phy->tproto = 0;
sas_phy->type = PHY_TYPE_PHYSICAL;
phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
phy->maximum_linkrate = hisi_hba->hw->phy_get_max_linkrate();
sas_phy->enabled = (phy_no < hisi_hba->n_phy) ? 1 : 0;
- sas_phy->class = SAS;
sas_phy->iproto = SAS_PROTOCOL_ALL;
sas_phy->tproto = 0;
sas_phy->type = PHY_TYPE_PHYSICAL;
iphy->sas_phy.ha = &ihost->sas_ha;
iphy->sas_phy.lldd_phy = iphy;
iphy->sas_phy.enabled = 1;
- iphy->sas_phy.class = SAS;
iphy->sas_phy.iproto = SAS_PROTOCOL_ALL;
iphy->sas_phy.tproto = 0;
iphy->sas_phy.type = PHY_TYPE_PHYSICAL;
void sas_scsi_recover_host(struct Scsi_Host *shost);
-int sas_show_class(enum sas_class class, char *buf);
int sas_show_proto(enum sas_protocol proto, char *buf);
int sas_show_linkrate(enum sas_linkrate linkrate, char *buf);
int sas_show_oob_mode(enum sas_oob_mode oob_mode, char *buf);
memcpy(port->sas_addr, phy->sas_addr, SAS_ADDR_SIZE);
if (*(u64 *)port->attached_sas_addr == 0) {
- port->class = phy->class;
memcpy(port->attached_sas_addr, phy->attached_sas_addr,
SAS_ADDR_SIZE);
port->iproto = phy->iproto;
INIT_LIST_HEAD(&port->phy_list);
memset(port->sas_addr, 0, SAS_ADDR_SIZE);
memset(port->attached_sas_addr, 0, SAS_ADDR_SIZE);
- port->class = 0;
port->iproto = 0;
port->tproto = 0;
port->oob_mode = 0;
phy->port = NULL;
timer_setup(&phy->timer, NULL, 0);
sas_phy->enabled = (phy_id < mvi->chip->n_phy) ? 1 : 0;
- sas_phy->class = SAS;
sas_phy->iproto = SAS_PROTOCOL_ALL;
sas_phy->tproto = 0;
sas_phy->type = PHY_TYPE_PHYSICAL;
phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
- sas_phy->class = SAS;
sas_phy->iproto = SAS_PROTOCOL_ALL;
sas_phy->tproto = 0;
sas_phy->type = PHY_TYPE_PHYSICAL;
struct block_device;
-enum sas_class {
- SAS,
- EXPANDER
-};
-
enum sas_phy_role {
PHY_ROLE_NONE = 0,
PHY_ROLE_TARGET = 0x40,
/* public: */
int id;
- enum sas_class class;
u8 sas_addr[SAS_ADDR_SIZE];
u8 attached_sas_addr[SAS_ADDR_SIZE];
enum sas_protocol iproto;
int enabled; /* must be set */
int id; /* must be set */
- enum sas_class class;
enum sas_protocol iproto;
enum sas_protocol tproto;