drivers: gpio: Kconfig: pedantic formatting cleanups

Align the Kconfig formatting with the vast majority of the Kconfig
files, to make it a bit easier / more pleasant to read ;-)

Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 3f50526..c5420e6 100644 (file)
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -27,12 +27,12 @@ config GPIOLIB_FASTPATH_LIMIT
        range 32 512
        default 512
        help
-          This adjusts the point at which certain APIs will switch from
-          using a stack allocated buffer to a dynamically allocated buffer.
+         This adjusts the point at which certain APIs will switch from
+         using a stack allocated buffer to a dynamically allocated buffer.
 
-          You shouldn't need to change this unless you really need to
-          optimize either stack space or performance. Change this carefully
-          since setting an incorrect value could cause stack corruption.
+         You shouldn't need to change this unless you really need to
+         optimize either stack space or performance. Change this carefully
+         since setting an incorrect value could cause stack corruption.
 
 config OF_GPIO
        def_bool y
@@ -320,7 +320,7 @@ config GPIO_MENZ127
        depends on MCB
        select GPIO_GENERIC
        help
-        Say yes here to support the MEN 16Z127 GPIO Controller
+         Say yes here to support the MEN 16Z127 GPIO Controller
 
 config GPIO_MM_LANTIQ
        bool "Lantiq Memory mapped GPIOs"
@@ -862,11 +862,11 @@ config GPIO_MAX732X
          Input and Output (designed by 'P'). The combinations are listed
          below:
 
-         8 bits:       max7319 (8I), max7320 (8O), max7321 (8P),
-                       max7322 (4I4O), max7323 (4P4O)
+         8 bits:       max7319 (8I), max7320 (8O), max7321 (8P),
+                       max7322 (4I4O), max7323 (4P4O)
 
-         16 bits:      max7324 (8I8O), max7325 (8P8O),
-                       max7326 (4I12O), max7327 (4P12O)
+         16 bits:      max7324 (8I8O), max7325 (8P8O),
+                       max7326 (4I12O), max7327 (4P12O)
 
          Board setup code must specify the model to use, and the start
          number for these GPIOs.
@@ -893,17 +893,17 @@ config GPIO_PCA953X
          SMBus I/O expanders, made mostly by NXP or TI.  Compatible
          models include:
 
-         4 bits:       pca9536, pca9537
+         4 bits:       pca9536, pca9537
 
-         8 bits:       max7310, max7315, pca6107, pca9534, pca9538, pca9554,
-                       pca9556, pca9557, pca9574, tca6408, tca9554, xra1202
+         8 bits:       max7310, max7315, pca6107, pca9534, pca9538, pca9554,
+                       pca9556, pca9557, pca9574, tca6408, tca9554, xra1202
 
-         16 bits:      max7312, max7313, pca9535, pca9539, pca9555, pca9575,
-                       tca6416
+         16 bits:      max7312, max7313, pca9535, pca9539, pca9555, pca9575,
+                       tca6416
 
-         24 bits:      tca6424
+         24 bits:      tca6424
 
-         40 bits:      pca9505, pca9698
+         40 bits:      pca9505, pca9698
 
 config GPIO_PCA953X_IRQ
        bool "Interrupt controller support for PCA953x"
@@ -925,7 +925,7 @@ config GPIO_PCF857X
 
          8 bits:   pcf8574, pcf8574a, pca8574, pca8574a,
                    pca9670, pca9672, pca9674, pca9674a,
-                   max7328, max7329
+                   max7328, max7329
 
          16 bits:  pcf8575, pcf8575c, pca8575,
                    pca9671, pca9673, pca9675
@@ -1047,9 +1047,9 @@ config HTC_EGPIO
        bool "HTC EGPIO support"
        depends on GPIOLIB && ARM
        help
-           This driver supports the CPLD egpio chip present on
-           several HTC phones.  It provides basic support for input
-           pins, output pins, and irqs.
+         This driver supports the CPLD egpio chip present on
+         several HTC phones.  It provides basic support for input
+         pins, output pins, and irqs.
 
 config GPIO_JANZ_TTL
        tristate "Janz VMOD-TTL Digital IO Module"
@@ -1085,7 +1085,7 @@ config GPIO_LP873X
          on LP873X PMICs.
 
          This driver can also be built as a module. If so, the module will be
-          called gpio-lp873x.
+         called gpio-lp873x.
 
 config GPIO_LP87565
        tristate "TI LP87565 GPIO"
@@ -1436,9 +1436,9 @@ config GPIO_VIPERBOARD
          Say yes here to access the GPIO signals of Nano River
          Technologies Viperboard. There are two GPIO chips on the
          board: gpioa and gpiob.
-          See viperboard API specification and Nano
-          River Tech's viperboard.h for detailed meaning
-          of the module parameters.
+         See viperboard API specification and Nano
+         River Tech's viperboard.h for detailed meaning
+         of the module parameters.
 
 endmenu