extcon: intel-cht-wc: Ignore failure to detect charger-type on host mode exit

When we leave host-mode because the id-pin is no longer connected to
ground, the 5v boost converter is normally still on, so we will see
Vbus, but it is not from a charger (normally) so the charger-type
detection will fail.

This commit silences the cht_wc_extcon_get_charger() false-positive
errors when we're leaving host mode.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c
index e22df5f..91a0023 100644 (file)
--- a/drivers/extcon/extcon-intel-cht-wc.c
+++ b/drivers/extcon/extcon-intel-cht-wc.c
@@ -96,6 +96,7 @@ struct cht_wc_extcon_data {
        struct regmap *regmap;
        struct extcon_dev *edev;
        unsigned int previous_cable;
+       bool usb_host;
 };
 
 static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts)
@@ -112,7 +113,8 @@ static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts)
        return USB_ID_FLOAT;
 }
 
-static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext)
+static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext,
+                                    bool ignore_errors)
 {
        int ret, usbsrc, status;
        unsigned long timeout;
@@ -135,6 +137,9 @@ static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext)
        } while (time_before(jiffies, timeout));
 
        if (status != CHT_WC_USBSRC_STS_SUCCESS) {
+               if (ignore_errors)
+                       return EXTCON_CHG_USB_SDP; /* Save fallback */
+
                if (status == CHT_WC_USBSRC_STS_FAIL)
                        dev_warn(ext->dev, "Could not detect charger type\n");
                else
@@ -203,6 +208,8 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
 {
        int ret, pwrsrc_sts, id;
        unsigned int cable = EXTCON_NONE;
+       /* Ignore errors in host mode, as the 5v boost converter is on then */
+       bool ignore_get_charger_errors = ext->usb_host;
 
        ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_STS, &pwrsrc_sts);
        if (ret) {
@@ -223,7 +230,7 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
                goto set_state;
        }
 
-       ret = cht_wc_extcon_get_charger(ext);
+       ret = cht_wc_extcon_get_charger(ext, ignore_get_charger_errors);
        if (ret >= 0)
                cable = ret;
 
@@ -238,8 +245,8 @@ set_state:
                ext->previous_cable = cable;
        }
 
-       extcon_set_state_sync(ext->edev, EXTCON_USB_HOST,
-                             id == USB_ID_GND || id == USB_RID_A);
+       ext->usb_host = ((id == USB_ID_GND) || (id == USB_RID_A));
+       extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, ext->usb_host);
 }
 
 static irqreturn_t cht_wc_extcon_isr(int irq, void *data)