+++ /dev/null
-/*
- * ALC260 quirk models
- * included by patch_realtek.c
- */
-
-/* ALC260 models */
-enum {
- ALC260_AUTO,
- ALC260_BASIC,
-#ifdef CONFIG_SND_DEBUG
- ALC260_TEST,
-#endif
- ALC260_MODEL_LAST /* last tag */
-};
-
-static const hda_nid_t alc260_dac_nids[1] = {
- /* front */
- 0x02,
-};
-
-static const hda_nid_t alc260_adc_nids[1] = {
- /* ADC0 */
- 0x04,
-};
-
-static const hda_nid_t alc260_adc_nids_alt[1] = {
- /* ADC1 */
- 0x05,
-};
-
-/* NIDs used when simultaneous access to both ADCs makes sense. Note that
- * alc260_capture_mixer assumes ADC0 (nid 0x04) is the first ADC.
- */
-static const hda_nid_t alc260_dual_adc_nids[2] = {
- /* ADC0, ADC1 */
- 0x04, 0x05
-};
-
-#define ALC260_DIGOUT_NID 0x03
-#define ALC260_DIGIN_NID 0x06
-
-static const struct hda_input_mux alc260_capture_source = {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x1 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- },
-};
-
-/* Acer TravelMate(/Extensa/Aspire) notebooks have similar configuration to
- * the Fujitsu S702x, but jacks are marked differently.
- */
-static const struct hda_input_mux alc260_acer_capture_sources[2] = {
- {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- { "Headphone", 0x5 },
- },
- },
- {
- .num_items = 5,
- .items = {
- { "Mic", 0x0 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- { "Headphone", 0x6 },
- { "Mixer", 0x5 },
- },
- },
-};
-
-/*
- * This is just place-holder, so there's something for alc_build_pcms to look
- * at when it calculates the maximum number of channels. ALC260 has no mixer
- * element which allows changing the channel mode, so the verb list is
- * never used.
- */
-static const struct hda_channel_mode alc260_modes[1] = {
- { 2, NULL },
-};
-
-
-/* Mixer combinations
- *
- * basic: base_output + input + pc_beep + capture
- * fujitsu: fujitsu + capture
- * acer: acer + capture
- */
-
-static const struct snd_kcontrol_new alc260_base_output_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
- HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc260_input_mixer[] = {
- HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT),
- { } /* end */
-};
-
-/*
- * initialization verbs
- */
-static const struct hda_verb alc260_init_verbs[] = {
- /* Line In pin widget for input */
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- /* CD pin widget for input */
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- /* Mic1 (rear panel) pin widget for input and vref at 80% */
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- /* Mic2 (front panel) pin widget for input and vref at 80% */
- {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- /* LINE-2 is used for line-out in rear */
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* select line-out */
- {0x0e, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* LINE-OUT pin */
- {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* enable HP */
- {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- /* enable Mono */
- {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* mute capture amp left and right */
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* set connection select to line in (default select for this ADC) */
- {0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
- /* mute capture amp left and right */
- {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* set connection select to line in (default select for this ADC) */
- {0x05, AC_VERB_SET_CONNECT_SEL, 0x02},
- /* set vol=0 Line-Out mixer amp left and right */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* unmute pin widget amp left and right (no gain on this amp) */
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* set vol=0 HP mixer amp left and right */
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* unmute pin widget amp left and right (no gain on this amp) */
- {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* set vol=0 Mono mixer amp left and right */
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* unmute pin widget amp left and right (no gain on this amp) */
- {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* unmute LINE-2 out pin */
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
- * Line In 2 = 0x03
- */
- /* mute analog inputs */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
- /* mute Front out path */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* mute Headphone out path */
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* mute Mono out path */
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- { }
-};
-
-static const struct hda_verb alc260_hp_dc7600_verbs[] = {
- {0x05, AC_VERB_SET_CONNECT_SEL, 0x01},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
- {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x10, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-/* Test configuration for debugging, modelled after the ALC880 test
- * configuration.
- */
-#ifdef CONFIG_SND_DEBUG
-static const hda_nid_t alc260_test_dac_nids[1] = {
- 0x02,
-};
-static const hda_nid_t alc260_test_adc_nids[2] = {
- 0x04, 0x05,
-};
-/* For testing the ALC260, each input MUX needs its own definition since
- * the signal assignments are different. This assumes that the first ADC
- * is NID 0x04.
- */
-static const struct hda_input_mux alc260_test_capture_sources[2] = {
- {
- .num_items = 7,
- .items = {
- { "MIC1 pin", 0x0 },
- { "MIC2 pin", 0x1 },
- { "LINE1 pin", 0x2 },
- { "LINE2 pin", 0x3 },
- { "CD pin", 0x4 },
- { "LINE-OUT pin", 0x5 },
- { "HP-OUT pin", 0x6 },
- },
- },
- {
- .num_items = 8,
- .items = {
- { "MIC1 pin", 0x0 },
- { "MIC2 pin", 0x1 },
- { "LINE1 pin", 0x2 },
- { "LINE2 pin", 0x3 },
- { "CD pin", 0x4 },
- { "Mixer", 0x5 },
- { "LINE-OUT pin", 0x6 },
- { "HP-OUT pin", 0x7 },
- },
- },
-};
-static const struct snd_kcontrol_new alc260_test_mixer[] = {
- /* Output driver widgets */
- HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("LOUT2 Playback Volume", 0x09, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("LOUT2 Playback Switch", 0x09, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("LOUT1 Playback Volume", 0x08, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("LOUT1 Playback Switch", 0x08, 2, HDA_INPUT),
-
- /* Modes for retasking pin widgets
- * Note: the ALC260 doesn't seem to act on requests to enable mic
- * bias from NIDs 0x0f and 0x10. The ALC260 datasheet doesn't
- * mention this restriction. At this stage it's not clear whether
- * this behaviour is intentional or is a hardware bug in chip
- * revisions available at least up until early 2006. Therefore for
- * now allow the "HP-OUT" and "LINE-OUT" Mode controls to span all
- * choices, but if it turns out that the lack of mic bias for these
- * NIDs is intentional we could change their modes from
- * ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS.
- */
- ALC_PIN_MODE("HP-OUT pin mode", 0x10, ALC_PIN_DIR_INOUT),
- ALC_PIN_MODE("LINE-OUT pin mode", 0x0f, ALC_PIN_DIR_INOUT),
- ALC_PIN_MODE("LINE2 pin mode", 0x15, ALC_PIN_DIR_INOUT),
- ALC_PIN_MODE("LINE1 pin mode", 0x14, ALC_PIN_DIR_INOUT),
- ALC_PIN_MODE("MIC2 pin mode", 0x13, ALC_PIN_DIR_INOUT),
- ALC_PIN_MODE("MIC1 pin mode", 0x12, ALC_PIN_DIR_INOUT),
-
- /* Loopback mixer controls */
- HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x07, 0x00, HDA_INPUT),
- HDA_CODEC_MUTE("MIC1 Playback Switch", 0x07, 0x00, HDA_INPUT),
- HDA_CODEC_VOLUME("MIC2 Playback Volume", 0x07, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("MIC2 Playback Switch", 0x07, 0x01, HDA_INPUT),
- HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x07, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("LINE1 Playback Switch", 0x07, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("LINE2 Playback Volume", 0x07, 0x03, HDA_INPUT),
- HDA_CODEC_MUTE("LINE2 Playback Switch", 0x07, 0x03, HDA_INPUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("LINE-OUT loopback Playback Volume", 0x07, 0x06, HDA_INPUT),
- HDA_CODEC_MUTE("LINE-OUT loopback Playback Switch", 0x07, 0x06, HDA_INPUT),
- HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x07, 0x7, HDA_INPUT),
- HDA_CODEC_MUTE("HP-OUT loopback Playback Switch", 0x07, 0x7, HDA_INPUT),
-
- /* Controls for GPIO pins, assuming they are configured as outputs */
- ALC_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01),
- ALC_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02),
- ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04),
- ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08),
-
- /* Switches to allow the digital IO pins to be enabled. The datasheet
- * is ambigious as to which NID is which; testing on laptops which
- * make this output available should provide clarification.
- */
- ALC_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x03, 0x01),
- ALC_SPDIF_CTRL_SWITCH("SPDIF Capture Switch", 0x06, 0x01),
-
- /* A switch allowing EAPD to be enabled. Some laptops seem to use
- * this output to turn on an external amplifier.
- */
- ALC_EAPD_CTRL_SWITCH("LINE-OUT EAPD Enable Switch", 0x0f, 0x02),
- ALC_EAPD_CTRL_SWITCH("HP-OUT EAPD Enable Switch", 0x10, 0x02),
-
- { } /* end */
-};
-static const struct hda_verb alc260_test_init_verbs[] = {
- /* Enable all GPIOs as outputs with an initial value of 0 */
- {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f},
- {0x01, AC_VERB_SET_GPIO_DATA, 0x00},
- {0x01, AC_VERB_SET_GPIO_MASK, 0x0f},
-
- /* Enable retasking pins as output, initially without power amp */
- {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-
- /* Disable digital (SPDIF) pins initially, but users can enable
- * them via a mixer switch. In the case of SPDIF-out, this initverb
- * payload also sets the generation to 0, output to be in "consumer"
- * PCM format, copyright asserted, no pre-emphasis and no validity
- * control.
- */
- {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
- {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
-
- /* Ensure mic1, mic2, line1 and line2 pin widgets take input from the
- * OUT1 sum bus when acting as an output.
- */
- {0x0b, AC_VERB_SET_CONNECT_SEL, 0},
- {0x0c, AC_VERB_SET_CONNECT_SEL, 0},
- {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
- {0x0e, AC_VERB_SET_CONNECT_SEL, 0},
-
- /* Start with output sum widgets muted and their output gains at min */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
- /* Unmute retasking pin widget output buffers since the default
- * state appears to be output. As the pin mode is changed by the
- * user the pin mode control will take care of enabling the pin's
- * input/output buffers as needed.
- */
- {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* Also unmute the mono-out pin widget */
- {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
- /* Mute capture amp left and right */
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- /* Set ADC connection select to match default mixer setting (mic1
- * pin)
- */
- {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* Do the same for the second ADC: mute capture input amp and
- * set ADC connection to mic1 pin
- */
- {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* Mute all inputs to mixer widget (even unconnected ones) */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
-
- { }
-};
-#endif
-
-/*
- * ALC260 configurations
- */
-static const char * const alc260_models[ALC260_MODEL_LAST] = {
- [ALC260_BASIC] = "basic",
-#ifdef CONFIG_SND_DEBUG
- [ALC260_TEST] = "test",
-#endif
- [ALC260_AUTO] = "auto",
-};
-
-static const struct snd_pci_quirk alc260_cfg_tbl[] = {
- SND_PCI_QUIRK(0x104d, 0x81bb, "Sony VAIO", ALC260_BASIC),
- SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC),
- SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC),
- SND_PCI_QUIRK(0x152d, 0x0729, "CTL U553W", ALC260_BASIC),
- {}
-};
-
-static const struct alc_config_preset alc260_presets[] = {
- [ALC260_BASIC] = {
- .mixers = { alc260_base_output_mixer,
- alc260_input_mixer },
- .init_verbs = { alc260_init_verbs },
- .num_dacs = ARRAY_SIZE(alc260_dac_nids),
- .dac_nids = alc260_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
- .adc_nids = alc260_dual_adc_nids,
- .num_channel_mode = ARRAY_SIZE(alc260_modes),
- .channel_mode = alc260_modes,
- .input_mux = &alc260_capture_source,
- },
-#ifdef CONFIG_SND_DEBUG
- [ALC260_TEST] = {
- .mixers = { alc260_test_mixer },
- .init_verbs = { alc260_test_init_verbs },
- .num_dacs = ARRAY_SIZE(alc260_test_dac_nids),
- .dac_nids = alc260_test_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc260_test_adc_nids),
- .adc_nids = alc260_test_adc_nids,
- .num_channel_mode = ARRAY_SIZE(alc260_modes),
- .channel_mode = alc260_modes,
- .num_mux_defs = ARRAY_SIZE(alc260_test_capture_sources),
- .input_mux = alc260_test_capture_sources,
- },
-#endif
-};
-
return err;
}
-/*
- * Control the mode of pin widget settings via the mixer. "pc" is used
- * instead of "%" to avoid consequences of accidentally treating the % as
- * being part of a format specifier. Maximum allowed length of a value is
- * 63 characters plus NULL terminator.
- *
- * Note: some retasking pin complexes seem to ignore requests for input
- * states other than HiZ (eg: PIN_VREFxx) and revert to HiZ if any of these
- * are requested. Therefore order this list so that this behaviour will not
- * cause problems when mixer clients move through the enum sequentially.
- * NIDs 0x0f and 0x10 have been observed to have this behaviour as of
- * March 2006.
- */
-static const char * const alc_pin_mode_names[] = {
- "Mic 50pc bias", "Mic 80pc bias",
- "Line in", "Line out", "Headphone out",
-};
-static const unsigned char alc_pin_mode_values[] = {
- PIN_VREF50, PIN_VREF80, PIN_IN, PIN_OUT, PIN_HP,
-};
-/* The control can present all 5 options, or it can limit the options based
- * in the pin being assumed to be exclusively an input or an output pin. In
- * addition, "input" pins may or may not process the mic bias option
- * depending on actual widget capability (NIDs 0x0f and 0x10 don't seem to
- * accept requests for bias as of chip versions up to March 2006) and/or
- * wiring in the computer.
- */
-#define ALC_PIN_DIR_IN 0x00
-#define ALC_PIN_DIR_OUT 0x01
-#define ALC_PIN_DIR_INOUT 0x02
-#define ALC_PIN_DIR_IN_NOMICBIAS 0x03
-#define ALC_PIN_DIR_INOUT_NOMICBIAS 0x04
-
-/* Info about the pin modes supported by the different pin direction modes.
- * For each direction the minimum and maximum values are given.
- */
-static const signed char alc_pin_mode_dir_info[5][2] = {
- { 0, 2 }, /* ALC_PIN_DIR_IN */
- { 3, 4 }, /* ALC_PIN_DIR_OUT */
- { 0, 4 }, /* ALC_PIN_DIR_INOUT */
- { 2, 2 }, /* ALC_PIN_DIR_IN_NOMICBIAS */
- { 2, 4 }, /* ALC_PIN_DIR_INOUT_NOMICBIAS */
-};
-#define alc_pin_mode_min(_dir) (alc_pin_mode_dir_info[_dir][0])
-#define alc_pin_mode_max(_dir) (alc_pin_mode_dir_info[_dir][1])
-#define alc_pin_mode_n_items(_dir) \
- (alc_pin_mode_max(_dir)-alc_pin_mode_min(_dir)+1)
-
-static int alc_pin_mode_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
-{
- unsigned int item_num = uinfo->value.enumerated.item;
- unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
-
- uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
- uinfo->count = 1;
- uinfo->value.enumerated.items = alc_pin_mode_n_items(dir);
-
- if (item_num<alc_pin_mode_min(dir) || item_num>alc_pin_mode_max(dir))
- item_num = alc_pin_mode_min(dir);
- strcpy(uinfo->value.enumerated.name, alc_pin_mode_names[item_num]);
- return 0;
-}
-
-static int alc_pin_mode_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- unsigned int i;
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- hda_nid_t nid = kcontrol->private_value & 0xffff;
- unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
- long *valp = ucontrol->value.integer.value;
- unsigned int pinctl = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_PIN_WIDGET_CONTROL,
- 0x00);
-
- /* Find enumerated value for current pinctl setting */
- i = alc_pin_mode_min(dir);
- while (i <= alc_pin_mode_max(dir) && alc_pin_mode_values[i] != pinctl)
- i++;
- *valp = i <= alc_pin_mode_max(dir) ? i: alc_pin_mode_min(dir);
- return 0;
-}
-
-static int alc_pin_mode_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- signed int change;
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- hda_nid_t nid = kcontrol->private_value & 0xffff;
- unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
- long val = *ucontrol->value.integer.value;
- unsigned int pinctl = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_PIN_WIDGET_CONTROL,
- 0x00);
-
- if (val < alc_pin_mode_min(dir) || val > alc_pin_mode_max(dir))
- val = alc_pin_mode_min(dir);
-
- change = pinctl != alc_pin_mode_values[val];
- if (change) {
- /* Set pin mode to that requested */
- snd_hda_codec_write_cache(codec, nid, 0,
- AC_VERB_SET_PIN_WIDGET_CONTROL,
- alc_pin_mode_values[val]);
-
- /* Also enable the retasking pin's input/output as required
- * for the requested pin mode. Enum values of 2 or less are
- * input modes.
- *
- * Dynamically switching the input/output buffers probably
- * reduces noise slightly (particularly on input) so we'll
- * do it. However, having both input and output buffers
- * enabled simultaneously doesn't seem to be problematic if
- * this turns out to be necessary in the future.
- */
- if (val <= 2) {
- snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0,
- HDA_AMP_MUTE, HDA_AMP_MUTE);
- snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, 0,
- HDA_AMP_MUTE, 0);
- } else {
- snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, 0,
- HDA_AMP_MUTE, HDA_AMP_MUTE);
- snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0,
- HDA_AMP_MUTE, 0);
- }
- }
- return change;
-}
-
-#define ALC_PIN_MODE(xname, nid, dir) \
- { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
- .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
- .info = alc_pin_mode_info, \
- .get = alc_pin_mode_get, \
- .put = alc_pin_mode_put, \
- .private_value = nid | (dir<<16) }
-
-/* A switch control for ALC260 GPIO pins. Multiple GPIOs can be ganged
- * together using a mask with more than one bit set. This control is
- * currently used only by the ALC260 test model. At this stage they are not
- * needed for any "production" models.
- */
-#ifdef CONFIG_SND_DEBUG
-#define alc_gpio_data_info snd_ctl_boolean_mono_info
-
-static int alc_gpio_data_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- hda_nid_t nid = kcontrol->private_value & 0xffff;
- unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
- long *valp = ucontrol->value.integer.value;
- unsigned int val = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_GPIO_DATA, 0x00);
-
- *valp = (val & mask) != 0;
- return 0;
-}
-static int alc_gpio_data_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- signed int change;
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- hda_nid_t nid = kcontrol->private_value & 0xffff;
- unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
- long val = *ucontrol->value.integer.value;
- unsigned int gpio_data = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_GPIO_DATA,
- 0x00);
-
- /* Set/unset the masked GPIO bit(s) as needed */
- change = (val == 0 ? 0 : mask) != (gpio_data & mask);
- if (val == 0)
- gpio_data &= ~mask;
- else
- gpio_data |= mask;
- snd_hda_codec_write_cache(codec, nid, 0,
- AC_VERB_SET_GPIO_DATA, gpio_data);
-
- return change;
-}
-#define ALC_GPIO_DATA_SWITCH(xname, nid, mask) \
- { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
- .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
- .info = alc_gpio_data_info, \
- .get = alc_gpio_data_get, \
- .put = alc_gpio_data_put, \
- .private_value = nid | (mask<<16) }
-#endif /* CONFIG_SND_DEBUG */
-
-/* A switch control to allow the enabling of the digital IO pins on the
- * ALC260. This is incredibly simplistic; the intention of this control is
- * to provide something in the test model allowing digital outputs to be
- * identified if present. If models are found which can utilise these
- * outputs a more complete mixer control can be devised for those models if
- * necessary.
- */
-#ifdef CONFIG_SND_DEBUG
-#define alc_spdif_ctrl_info snd_ctl_boolean_mono_info
-
-static int alc_spdif_ctrl_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- hda_nid_t nid = kcontrol->private_value & 0xffff;
- unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
- long *valp = ucontrol->value.integer.value;
- unsigned int val = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_DIGI_CONVERT_1, 0x00);
-
- *valp = (val & mask) != 0;
- return 0;
-}
-static int alc_spdif_ctrl_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- signed int change;
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- hda_nid_t nid = kcontrol->private_value & 0xffff;
- unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
- long val = *ucontrol->value.integer.value;
- unsigned int ctrl_data = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_DIGI_CONVERT_1,
- 0x00);
-
- /* Set/unset the masked control bit(s) as needed */
- change = (val == 0 ? 0 : mask) != (ctrl_data & mask);
- if (val==0)
- ctrl_data &= ~mask;
- else
- ctrl_data |= mask;
- snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
- ctrl_data);
-
- return change;
-}
-#define ALC_SPDIF_CTRL_SWITCH(xname, nid, mask) \
- { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
- .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
- .info = alc_spdif_ctrl_info, \
- .get = alc_spdif_ctrl_get, \
- .put = alc_spdif_ctrl_put, \
- .private_value = nid | (mask<<16) }
-#endif /* CONFIG_SND_DEBUG */
-
-/* A switch control to allow the enabling EAPD digital outputs on the ALC26x.
- * Again, this is only used in the ALC26x test models to help identify when
- * the EAPD line must be asserted for features to work.
- */
-#ifdef CONFIG_SND_DEBUG
-#define alc_eapd_ctrl_info snd_ctl_boolean_mono_info
-
-static int alc_eapd_ctrl_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- hda_nid_t nid = kcontrol->private_value & 0xffff;
- unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
- long *valp = ucontrol->value.integer.value;
- unsigned int val = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_EAPD_BTLENABLE, 0x00);
-
- *valp = (val & mask) != 0;
- return 0;
-}
-
-static int alc_eapd_ctrl_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- int change;
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- hda_nid_t nid = kcontrol->private_value & 0xffff;
- unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
- long val = *ucontrol->value.integer.value;
- unsigned int ctrl_data = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_EAPD_BTLENABLE,
- 0x00);
-
- /* Set/unset the masked control bit(s) as needed */
- change = (!val ? 0 : mask) != (ctrl_data & mask);
- if (!val)
- ctrl_data &= ~mask;
- else
- ctrl_data |= mask;
- snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_EAPD_BTLENABLE,
- ctrl_data);
-
- return change;
-}
-
-#define ALC_EAPD_CTRL_SWITCH(xname, nid, mask) \
- { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
- .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
- .info = alc_eapd_ctrl_info, \
- .get = alc_eapd_ctrl_get, \
- .put = alc_eapd_ctrl_put, \
- .private_value = nid | (mask<<16) }
-#endif /* CONFIG_SND_DEBUG */
-
static void alc_fixup_autocfg_pin_nums(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
projects / platform / kernel / linux-arm64.git / commitdiff