* config/msp430/msp430-modes.def (PSI): Add.
* config/msp430/msp430-protos.h (msp430_hard_regno_nregs_has_padding): New.
(msp430_hard_regno_nregs_with_padding): New.
* config/msp430/msp430.c (msp430_scalar_mode_supported_p): New.
(msp430_hard_regno_nregs_has_padding): New.
(msp430_hard_regno_nregs_with_padding): New.
(msp430_unwind_word_mode): Use PSImode instead of SImode.
(msp430_addr_space_legitimate_address_p): New.
(msp430_asm_integer): New.
(msp430_init_dwarf_reg_sizes_extra): New.
(msp430_print_operand): Use X suffix for PSImode even in small model.
* config/msp430/msp430.h (POINTER_SIZE): Use 20 bits, not 32.
(PTR_SIZE): ...but 4 bytes for EH.
(SIZE_TYPE): Use __int20.
(PTRDIFF_TYPE): Likewise.
(INCOMING_FRAME_SP_OFFSET): Adjust.
* config/msp430/msp430.md (movqi_topbyte): New.
(movpsi): Use fixed suffixes.
(movsipsi2): Enable for 430X, not large model.
(extendhipsi2): Likewise.
(zero_extendhisi2): Likewise.
(zero_extendhisipsi2): Likewise.
(extend_and_shift1_hipsi2): Likewise.
(extendpsisi2): Likewise.
(*bitbranch<mode>4_z): Fix suffix logic.
From-SVN: r216225
+2014-10-14 DJ Delorie <dj@redhat.com>
+
+ * config/msp430/msp430-modes.def (PSI): Add.
+
+ * config/msp430/msp430-protos.h (msp430_hard_regno_nregs_has_padding): New.
+ (msp430_hard_regno_nregs_with_padding): New.
+ * config/msp430/msp430.c (msp430_scalar_mode_supported_p): New.
+ (msp430_hard_regno_nregs_has_padding): New.
+ (msp430_hard_regno_nregs_with_padding): New.
+ (msp430_unwind_word_mode): Use PSImode instead of SImode.
+ (msp430_addr_space_legitimate_address_p): New.
+ (msp430_asm_integer): New.
+ (msp430_init_dwarf_reg_sizes_extra): New.
+ (msp430_print_operand): Use X suffix for PSImode even in small model.
+ * config/msp430/msp430.h (POINTER_SIZE): Use 20 bits, not 32.
+ (PTR_SIZE): ...but 4 bytes for EH.
+ (SIZE_TYPE): Use __int20.
+ (PTRDIFF_TYPE): Likewise.
+ (INCOMING_FRAME_SP_OFFSET): Adjust.
+ * config/msp430/msp430.md (movqi_topbyte): New.
+ (movpsi): Use fixed suffixes.
+ (movsipsi2): Enable for 430X, not large model.
+ (extendhipsi2): Likewise.
+ (zero_extendhisi2): Likewise.
+ (zero_extendhisipsi2): Likewise.
+ (extend_and_shift1_hipsi2): Likewise.
+ (extendpsisi2): Likewise.
+ (*bitbranch<mode>4_z): Fix suffix logic.
+
2014-10-14 Eric Botcazou <ebotcazou@adacore.com>
PR ada/62019
/* 20-bit address */
PARTIAL_INT_MODE (SI, 20, PSI);
+INT_N (PSI, 20);
void msp430_fixup_compare_operands (enum machine_mode, rtx *);
int msp430_hard_regno_mode_ok (int, enum machine_mode);
int msp430_hard_regno_nregs (int, enum machine_mode);
+int msp430_hard_regno_nregs_has_padding (int, enum machine_mode);
+int msp430_hard_regno_nregs_with_padding (int, enum machine_mode);
+bool msp430_hwmult_enabled (void);
rtx msp430_incoming_return_addr_rtx (void);
void msp430_init_cumulative_args (CUMULATIVE_ARGS *, tree, rtx, tree, int);
int msp430_initial_elimination_offset (int, int);
optimize_size = 1;
}
+#undef TARGET_SCALAR_MODE_SUPPORTED_P
+#define TARGET_SCALAR_MODE_SUPPORTED_P msp430_scalar_mode_supported_p
+
+static bool
+msp430_scalar_mode_supported_p (enum machine_mode m)
+{
+ if (m == PSImode && msp430x)
+ return true;
+#if 0
+ if (m == TImode)
+ return true;
+#endif
+ return default_scalar_mode_supported_p (m);
+}
+
\f
/* Storage Layout */
/ UNITS_PER_WORD);
}
+/* Implements HARD_REGNO_NREGS_HAS_PADDING. */
+int
+msp430_hard_regno_nregs_has_padding (int regno ATTRIBUTE_UNUSED,
+ enum machine_mode mode)
+{
+ if (mode == PSImode && msp430x)
+ return 1;
+ return ((GET_MODE_SIZE (mode) + UNITS_PER_WORD - 1)
+ / UNITS_PER_WORD);
+}
+
+/* Implements HARD_REGNO_NREGS_WITH_PADDING. */
+int
+msp430_hard_regno_nregs_with_padding (int regno ATTRIBUTE_UNUSED,
+ enum machine_mode mode)
+{
+ if (mode == PSImode)
+ return 2;
+ return msp430_hard_regno_nregs (regno, mode);
+}
+
/* Implements HARD_REGNO_MODE_OK. */
int
msp430_hard_regno_mode_ok (int regno ATTRIBUTE_UNUSED,
static enum machine_mode
msp430_unwind_word_mode (void)
{
- return TARGET_LARGE ? SImode : HImode;
+ return TARGET_LARGE ? PSImode : HImode;
}
/* Determine if one named address space is a subset of another. */
}
}
+#undef TARGET_ADDR_SPACE_LEGITIMATE_ADDRESS_P
+#define TARGET_ADDR_SPACE_LEGITIMATE_ADDRESS_P msp430_addr_space_legitimate_address_p
+
+bool
+msp430_addr_space_legitimate_address_p (enum machine_mode mode,
+ rtx x,
+ bool strict,
+ addr_space_t as ATTRIBUTE_UNUSED)
+{
+ return msp430_legitimate_address_p (mode, x, strict);
+}
+
+#undef TARGET_ASM_INTEGER
+#define TARGET_ASM_INTEGER msp430_asm_integer
+static bool
+msp430_asm_integer (rtx x, unsigned int size, int aligned_p)
+{
+ int c = GET_CODE (x);
+
+ if (size == 3 && GET_MODE (x) == PSImode)
+ size = 4;
+
+ switch (size)
+ {
+ case 4:
+ if (c == SYMBOL_REF || c == CONST || c == LABEL_REF || c == CONST_INT)
+ {
+ fprintf (asm_out_file, "\t.long\t");
+ output_addr_const (asm_out_file, x);
+ fputc ('\n', asm_out_file);
+ return true;
+ }
+ break;
+ }
+ return default_assemble_integer (x, size, aligned_p);
+}
+
+#undef TARGET_ASM_OUTPUT_ADDR_CONST_EXTRA
+#define TARGET_ASM_OUTPUT_ADDR_CONST_EXTRA msp430_asm_output_addr_const_extra
+static bool
+msp430_asm_output_addr_const_extra (FILE *file, rtx x)
+{
+ debug_rtx(x);
+ return false;
+}
+
#undef TARGET_LEGITIMATE_CONSTANT_P
#define TARGET_LEGITIMATE_CONSTANT_P msp430_legitimate_constant
emit_move_insn (tmp, ra);
}
+#undef TARGET_INIT_DWARF_REG_SIZES_EXTRA
+#define TARGET_INIT_DWARF_REG_SIZES_EXTRA msp430_init_dwarf_reg_sizes_extra
+void
+msp430_init_dwarf_reg_sizes_extra (tree address)
+{
+ int i;
+ rtx addr = expand_normal (address);
+ rtx mem = gen_rtx_MEM (BLKmode, addr);
+
+ if (!msp430x)
+ return;
+
+ for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
+ {
+ unsigned int dnum = DWARF_FRAME_REGNUM (i);
+ unsigned int rnum = DWARF2_FRAME_REG_OUT (dnum, 1);
+
+ if (rnum < DWARF_FRAME_REGISTERS)
+ {
+ HOST_WIDE_INT offset = rnum * GET_MODE_SIZE (QImode);
+
+ emit_move_insn (adjust_address (mem, QImode, offset),
+ gen_int_mode (4, QImode));
+ }
+ }
+}
+
/* This is a list of MD patterns that implement fixed-count shifts. */
static struct
{
case 'X':
/* This is used to turn, for example, an ADD opcode into an ADDX
opcode when we're using 20-bit addresses. */
- if (TARGET_LARGE)
+ if (TARGET_LARGE || GET_MODE (op) == PSImode)
fprintf (file, "X");
/* We don't care which operand we use, but we want 'X' in the MD
file, so we do it this way. */
#define MAX_REGS_PER_ADDRESS 1
#define Pmode (TARGET_LARGE ? PSImode : HImode)
-/* Note: 32 is a lie. Large pointers are actually 20-bits wide. But gcc
- thinks that any non-power-of-2 pointer size equates to BLKmode, which
- causes all kinds of problems... */
-#define POINTER_SIZE (TARGET_LARGE ? 32 : 16)
+#define POINTER_SIZE (TARGET_LARGE ? 20 : 16)
+/* This is just for .eh_frame, to match bfd. */
+#define PTR_SIZE (TARGET_LARGE ? 4 : 2)
#define POINTERS_EXTEND_UNSIGNED 1
#define ADDR_SPACE_NEAR 1
/* Layout of Source Language Data Types */
#undef SIZE_TYPE
-#define SIZE_TYPE (TARGET_LARGE ? "long unsigned int" : "unsigned int")
+#define SIZE_TYPE (TARGET_LARGE ? "__int20 unsigned" : "unsigned int")
#undef PTRDIFF_TYPE
-#define PTRDIFF_TYPE (TARGET_LARGE ? "long int" : "int")
+#define PTRDIFF_TYPE (TARGET_LARGE ? "__int20" : "int")
#undef WCHAR_TYPE
#define WCHAR_TYPE "long int"
#undef WCHAR_TYPE_SIZE
#undef DWARF2_ADDR_SIZE
#define DWARF2_ADDR_SIZE 4
-#define INCOMING_FRAME_SP_OFFSET (POINTER_SIZE / BITS_PER_UNIT)
+#define INCOMING_FRAME_SP_OFFSET (TARGET_LARGE ? 4 : 2)
#undef PREFERRED_DEBUGGING_TYPE
#define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
MOV%X1.B\t%1, %0"
)
+(define_insn "movqi_topbyte"
+ [(set (match_operand:QI 0 "msp_nonimmediate_operand" "=r")
+ (subreg:QI (match_operand:PSI 1 "msp_general_operand" "r") 2))]
+ "msp430x"
+ "PUSHM.A\t#1,%1 { POPM.W\t#1,%0 { POPM.W\t#1,%0"
+)
+
(define_insn "movqi"
[(set (match_operand:QI 0 "msp_nonimmediate_operand" "=rYs,rm")
(match_operand:QI 1 "msp_general_operand" "riYs,rmi"))]
(match_operand:PSI 1 "msp_general_operand" "riYa,r,rmi"))]
""
"@
- MOV%Q0\t%1, %0
- MOV%Q0\t%1, %0
- MOV%X0.%Q0\t%1, %0")
+ MOVA\t%1, %0
+ MOVA\t%1, %0
+ MOVX.A\t%1, %0")
; This pattern is identical to the truncsipsi2 pattern except
; that it uses a SUBREG instead of a TRUNC. It is needed in
(define_insn "movsipsi2"
[(set (match_operand:PSI 0 "register_operand" "=r")
(subreg:PSI (match_operand:SI 1 "register_operand" "r") 0))]
- "TARGET_LARGE"
+ "msp430x"
"PUSH.W\t%H1 { PUSH.W\t%L1 { POPM.A #1, %0 ; Move reg-pair %L1:%H1 into pointer %0"
)
(define_insn "extendhipsi2"
[(set (match_operand:PSI 0 "nonimmediate_operand" "=r")
(subreg:PSI (sign_extend:SI (match_operand:HI 1 "nonimmediate_operand" "0")) 0))]
- "TARGET_LARGE"
+ "msp430x"
"RLAM.A #4, %0 { RRAM.A #4, %0"
)
(define_insn "zero_extendhisi2"
[(set (match_operand:SI 0 "nonimmediate_operand" "=rm")
(zero_extend:SI (match_operand:HI 1 "nonimmediate_operand" "0")))]
- "TARGET_LARGE"
+ "msp430x"
"MOV.W\t#0,%H0"
)
(define_insn "zero_extendhisipsi2"
[(set (match_operand:PSI 0 "nonimmediate_operand" "=r,r")
(subreg:PSI (zero_extend:SI (match_operand:HI 1 "nonimmediate_operand" "0,r")) 0))]
- "TARGET_LARGE"
+ "msp430x"
"@
AND.W\t#-1,%0
MOV.W\t%1,%0"
[(set (subreg:SI (match_operand:PSI 0 "nonimmediate_operand" "=r") 0)
(ashift:SI (sign_extend:SI (match_operand:HI 1 "nonimmediate_operand" "0"))
(const_int 1)))]
- "TARGET_LARGE"
+ "msp430x"
"RLAM.A #4, %0 { RRAM.A #3, %0"
)
[(set (subreg:SI (match_operand:PSI 0 "nonimmediate_operand" "=r") 0)
(ashift:SI (sign_extend:SI (match_operand:HI 1 "nonimmediate_operand" "0"))
(const_int 2)))]
- "TARGET_LARGE"
+ "msp430x"
"RLAM.A #4, %0 { RRAM.A #2, %0"
)
(define_insn "extendpsisi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(sign_extend:SI (match_operand:PSI 1 "register_operand" "r")))]
- "TARGET_LARGE"
+ "msp430x"
"*
/* The intention here is that we copy the bottom 16-bits of
%1 into %L0 (zeroing the top four bits). Then we copy the
(clobber (reg:BI CARRY))
]
""
- "BIT%x0%X0%b0\t%1, %0 { JEQ\t%l2"
+ "BIT%x0%b0\t%1, %0 { JEQ\t%l2"
)
(define_insn "*bitbranch<mode>4"
projects / platform / upstream / gcc.git / commitdiff