#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
-#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/init.h>
/* SMBus address offsets */
static unsigned short vt596_smba;
#define SMBHSTSTS (vt596_smba + 0)
-#define SMBHSLVSTS (vt596_smba + 1)
#define SMBHSTCNT (vt596_smba + 2)
#define SMBHSTCMD (vt596_smba + 3)
#define SMBHSTADD (vt596_smba + 4)
#define SMBHSTDAT0 (vt596_smba + 5)
#define SMBHSTDAT1 (vt596_smba + 6)
#define SMBBLKDAT (vt596_smba + 7)
-#define SMBSLVCNT (vt596_smba + 8)
-#define SMBSHDWCMD (vt596_smba + 9)
-#define SMBSLVEVT (vt596_smba + 0xA)
-#define SMBSLVDAT (vt596_smba + 0xC)
/* PCI Address Constants */
/* SMBus data in configuration space can be found in two places,
We try to select the better one */
-static unsigned short smb_cf_hstcfg = 0xD2;
-
-#define SMBHSTCFG (smb_cf_hstcfg)
-#define SMBSLVC (smb_cf_hstcfg + 1)
-#define SMBSHDW1 (smb_cf_hstcfg + 2)
-#define SMBSHDW2 (smb_cf_hstcfg + 3)
-#define SMBREV (smb_cf_hstcfg + 4)
+static unsigned short SMBHSTCFG = 0xD2;
/* Other settings */
#define MAX_TIMEOUT 500
-#define ENABLE_INT9 0
/* VT82C596 constants */
#define VT596_QUICK 0x00
"EXTREMELY DANGEROUS!");
+static struct pci_driver vt596_driver;
static struct i2c_adapter vt596_adapter;
#define FEATURE_I2CBLOCK (1<<0)
static unsigned int vt596_features;
-/* Another internally used function */
+/* Return -1 on error, 0 on success */
static int vt596_transaction(void)
{
int temp;
/* Make sure the SMBus host is ready to start transmitting */
if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). "
- "Resetting...\n", temp);
+ "Resetting... ", temp);
outb_p(temp, SMBHSTSTS);
if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
- dev_dbg(&vt596_adapter.dev, "Failed! (0x%02x)\n", temp);
-
+ printk("Failed! (0x%02x)\n", temp);
return -1;
} else {
- dev_dbg(&vt596_adapter.dev, "Successfull!\n");
+ printk("Successful!\n");
}
}
- /* start the transaction by setting bit 6 */
- outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT);
+ /* Start the transaction by setting bit 6 */
+ outb_p(inb(SMBHSTCNT) | 0x40, SMBHSTCNT);
- /* We will always wait for a fraction of a second!
- I don't know if VIA needs this, Intel did */
+ /* We will always wait for a fraction of a second */
do {
msleep(1);
temp = inb_p(SMBHSTSTS);
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
result = -1;
- dev_dbg(&vt596_adapter.dev, "SMBus Timeout!\n");
+ dev_err(&vt596_adapter.dev, "SMBus timeout!\n");
}
if (temp & 0x10) {
result = -1;
- dev_dbg(&vt596_adapter.dev, "Error: Failed bus transaction\n");
+ dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n",
+ inb_p(SMBHSTCNT) & 0x3C);
}
if (temp & 0x08) {
result = -1;
- dev_info(&vt596_adapter.dev, "Bus collision! SMBus may be "
- "locked until next hard\nreset. (sorry!)\n");
- /* Clock stops and slave is stuck in mid-transmission */
+ dev_err(&vt596_adapter.dev, "SMBus collision!\n");
}
if (temp & 0x04) {
result = -1;
- dev_dbg(&vt596_adapter.dev, "Error: no response!\n");
+ /* Quick commands are used to probe for chips, so
+ errors are expected, and we don't want to frighten the
+ user. */
+ if ((inb_p(SMBHSTCNT) & 0x3C) != VT596_QUICK)
+ dev_err(&vt596_adapter.dev, "Transaction error!\n");
}
- if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
+ /* Resetting status register */
+ if (temp & 0x1F)
outb_p(temp, SMBHSTSTS);
- if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
- dev_warn(&vt596_adapter.dev, "Failed reset at end "
- "of transaction (%02x)\n", temp);
- }
- }
dev_dbg(&vt596_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, "
"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
return result;
}
-/* Return -1 on error. */
+/* Return -1 on error, 0 on success */
static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data *data)
{
- int i, len;
+ int i;
switch (size) {
- case I2C_SMBUS_PROC_CALL:
- dev_info(&vt596_adapter.dev,
- "I2C_SMBUS_PROC_CALL not supported!\n");
- return -1;
case I2C_SMBUS_QUICK:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
size = VT596_QUICK;
break;
case I2C_SMBUS_BYTE:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
if (read_write == I2C_SMBUS_WRITE)
outb_p(command, SMBHSTCMD);
size = VT596_BYTE;
break;
case I2C_SMBUS_BYTE_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE)
outb_p(data->byte, SMBHSTDAT0);
size = VT596_BYTE_DATA;
break;
case I2C_SMBUS_WORD_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE) {
outb_p(data->word & 0xff, SMBHSTDAT0);
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
if (!(vt596_features & FEATURE_I2CBLOCK))
- return -1;
+ goto exit_unsupported;
if (read_write == I2C_SMBUS_READ)
outb_p(I2C_SMBUS_BLOCK_MAX, SMBHSTDAT0);
/* Fall through */
case I2C_SMBUS_BLOCK_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE) {
- len = data->block[0];
- if (len < 0)
- len = 0;
+ u8 len = data->block[0];
if (len > I2C_SMBUS_BLOCK_MAX)
len = I2C_SMBUS_BLOCK_MAX;
outb_p(len, SMBHSTDAT0);
- i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
+ inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
for (i = 1; i <= len; i++)
outb_p(data->block[i], SMBBLKDAT);
}
size = (size == I2C_SMBUS_I2C_BLOCK_DATA) ?
VT596_I2C_BLOCK_DATA : VT596_BLOCK_DATA;
break;
+ default:
+ goto exit_unsupported;
}
- outb_p((size & 0x3C) + (ENABLE_INT9 & 1), SMBHSTCNT);
+ outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD);
+ outb_p((size & 0x3C), SMBHSTCNT);
if (vt596_transaction()) /* Error in transaction */
return -1;
switch (size) {
case VT596_BYTE:
- /* Where is the result put? I assume here it is in
- * SMBHSTDAT0 but it might just as well be in the
- * SMBHSTCMD. No clue in the docs
- */
- data->byte = inb_p(SMBHSTDAT0);
- break;
case VT596_BYTE_DATA:
data->byte = inb_p(SMBHSTDAT0);
break;
data->block[0] = inb_p(SMBHSTDAT0);
if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
data->block[0] = I2C_SMBUS_BLOCK_MAX;
- i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
+ inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
for (i = 1; i <= data->block[0]; i++)
data->block[i] = inb_p(SMBBLKDAT);
break;
}
return 0;
+
+exit_unsupported:
+ dev_warn(&vt596_adapter.dev, "Unsupported command invoked! (0x%02x)\n",
+ size);
+ return -1;
}
static u32 vt596_func(struct i2c_adapter *adapter)
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static int __devinit vt596_probe(struct pci_dev *pdev,
}
if ((pci_read_config_word(pdev, id->driver_data, &vt596_smba)) ||
- !(vt596_smba & 0x1)) {
+ !(vt596_smba & 0x0001)) {
/* try 2nd address and config reg. for 596 */
if (id->device == PCI_DEVICE_ID_VIA_82C596_3 &&
!pci_read_config_word(pdev, SMBBA2, &vt596_smba) &&
- (vt596_smba & 0x1)) {
- smb_cf_hstcfg = 0x84;
+ (vt596_smba & 0x0001)) {
+ SMBHSTCFG = 0x84;
} else {
/* no matches at all */
dev_err(&pdev->dev, "Cannot configure "
}
found:
- if (!request_region(vt596_smba, 8, "viapro-smbus")) {
+ if (!request_region(vt596_smba, 8, vt596_driver.name)) {
dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
vt596_smba);
return -ENODEV;
pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
dev_warn(&pdev->dev, "WARNING: SMBus interface set to new "
"address 0x%04x!\n", vt596_smba);
- } else if ((temp & 1) == 0) {
+ } else if (!(temp & 0x01)) {
if (force) {
/* NOTE: This assumes I/O space and other allocations
* WERE done by the Bios! Don't complain if your
* :') Check for Bios updates before resorting to
* this.
*/
- pci_write_config_byte(pdev, SMBHSTCFG, temp | 1);
+ pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
dev_info(&pdev->dev, "Enabling SMBus device\n");
} else {
dev_err(&pdev->dev, "SMBUS: Error: Host SMBus "
}
}
- if ((temp & 0x0E) == 8)
- dev_dbg(&pdev->dev, "using Interrupt 9 for SMBus.\n");
- else if ((temp & 0x0E) == 0)
- dev_dbg(&pdev->dev, "using Interrupt SMI# for SMBus.\n");
- else
- dev_dbg(&pdev->dev, "Illegal Interrupt configuration "
- "(or code out of date)!\n");
-
- pci_read_config_byte(pdev, SMBREV, &temp);
- dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp);
dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba);
switch (pdev->device) {
projects / platform / kernel / linux-exynos.git / commitdiff