net: dsa: microchip: break KSZ9477 DSA driver into two files
authorTristram Ha <Tristram.Ha@microchip.com>
Tue, 20 Nov 2018 23:55:09 +0000 (15:55 -0800)
committerDavid S. Miller <davem@davemloft.net>
Wed, 21 Nov 2018 04:57:12 +0000 (20:57 -0800)
Break KSZ9477 DSA driver into two files in preparation to add more KSZ
switch drivers.
Add common functions in ksz_common.h so that other KSZ switch drivers
can access code in ksz_common.c.
Add ksz_spi.h for common functions used by KSZ switch SPI drivers.

Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/dsa/microchip/Kconfig
drivers/net/dsa/microchip/Makefile
drivers/net/dsa/microchip/ksz9477.c [new file with mode: 0644]
drivers/net/dsa/microchip/ksz9477_spi.c
drivers/net/dsa/microchip/ksz_common.c
drivers/net/dsa/microchip/ksz_common.h [new file with mode: 0644]
drivers/net/dsa/microchip/ksz_priv.h
drivers/net/dsa/microchip/ksz_spi.h [new file with mode: 0644]

index 4e25fe4..a8caf92 100644 (file)
@@ -1,7 +1,11 @@
+config NET_DSA_MICROCHIP_KSZ_COMMON
+       tristate
+
 menuconfig NET_DSA_MICROCHIP_KSZ9477
        tristate "Microchip KSZ9477 series switch support"
        depends on NET_DSA
        select NET_DSA_TAG_KSZ
+       select NET_DSA_MICROCHIP_KSZ_COMMON
        help
          This driver adds support for Microchip KSZ9477 switch chips.
 
index 9393e73..3142c18 100644 (file)
@@ -1,2 +1,3 @@
-obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477)                += ksz_common.o
+obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON)     += ksz_common.o
+obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477)                += ksz9477.o
 obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI)    += ksz9477_spi.o
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
new file mode 100644 (file)
index 0000000..80df6c0
--- /dev/null
@@ -0,0 +1,1316 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip KSZ9477 switch driver main logic
+ *
+ * Copyright (C) 2017-2018 Microchip Technology Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/microchip-ksz.h>
+#include <linux/phy.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <net/dsa.h>
+#include <net/switchdev.h>
+
+#include "ksz_priv.h"
+#include "ksz_common.h"
+#include "ksz_9477_reg.h"
+
+static const struct {
+       int index;
+       char string[ETH_GSTRING_LEN];
+} ksz9477_mib_names[TOTAL_SWITCH_COUNTER_NUM] = {
+       { 0x00, "rx_hi" },
+       { 0x01, "rx_undersize" },
+       { 0x02, "rx_fragments" },
+       { 0x03, "rx_oversize" },
+       { 0x04, "rx_jabbers" },
+       { 0x05, "rx_symbol_err" },
+       { 0x06, "rx_crc_err" },
+       { 0x07, "rx_align_err" },
+       { 0x08, "rx_mac_ctrl" },
+       { 0x09, "rx_pause" },
+       { 0x0A, "rx_bcast" },
+       { 0x0B, "rx_mcast" },
+       { 0x0C, "rx_ucast" },
+       { 0x0D, "rx_64_or_less" },
+       { 0x0E, "rx_65_127" },
+       { 0x0F, "rx_128_255" },
+       { 0x10, "rx_256_511" },
+       { 0x11, "rx_512_1023" },
+       { 0x12, "rx_1024_1522" },
+       { 0x13, "rx_1523_2000" },
+       { 0x14, "rx_2001" },
+       { 0x15, "tx_hi" },
+       { 0x16, "tx_late_col" },
+       { 0x17, "tx_pause" },
+       { 0x18, "tx_bcast" },
+       { 0x19, "tx_mcast" },
+       { 0x1A, "tx_ucast" },
+       { 0x1B, "tx_deferred" },
+       { 0x1C, "tx_total_col" },
+       { 0x1D, "tx_exc_col" },
+       { 0x1E, "tx_single_col" },
+       { 0x1F, "tx_mult_col" },
+       { 0x80, "rx_total" },
+       { 0x81, "tx_total" },
+       { 0x82, "rx_discards" },
+       { 0x83, "tx_discards" },
+};
+
+static void ksz9477_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set)
+{
+       u32 data;
+
+       ksz_read32(dev, addr, &data);
+       if (set)
+               data |= bits;
+       else
+               data &= ~bits;
+       ksz_write32(dev, addr, data);
+}
+
+static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset,
+                              u32 bits, bool set)
+{
+       u32 addr;
+       u32 data;
+
+       addr = PORT_CTRL_ADDR(port, offset);
+       ksz_read32(dev, addr, &data);
+
+       if (set)
+               data |= bits;
+       else
+               data &= ~bits;
+
+       ksz_write32(dev, addr, data);
+}
+
+static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev, u32 waiton,
+                                       int timeout)
+{
+       u8 data;
+
+       do {
+               ksz_read8(dev, REG_SW_VLAN_CTRL, &data);
+               if (!(data & waiton))
+                       break;
+               usleep_range(1, 10);
+       } while (timeout-- > 0);
+
+       if (timeout <= 0)
+               return -ETIMEDOUT;
+
+       return 0;
+}
+
+static int ksz9477_get_vlan_table(struct ksz_device *dev, u16 vid,
+                                 u32 *vlan_table)
+{
+       int ret;
+
+       mutex_lock(&dev->vlan_mutex);
+
+       ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
+       ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START);
+
+       /* wait to be cleared */
+       ret = ksz9477_wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
+       if (ret < 0) {
+               dev_dbg(dev->dev, "Failed to read vlan table\n");
+               goto exit;
+       }
+
+       ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]);
+       ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]);
+       ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]);
+
+       ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
+
+exit:
+       mutex_unlock(&dev->vlan_mutex);
+
+       return ret;
+}
+
+static int ksz9477_set_vlan_table(struct ksz_device *dev, u16 vid,
+                                 u32 *vlan_table)
+{
+       int ret;
+
+       mutex_lock(&dev->vlan_mutex);
+
+       ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]);
+       ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]);
+       ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]);
+
+       ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
+       ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE);
+
+       /* wait to be cleared */
+       ret = ksz9477_wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
+       if (ret < 0) {
+               dev_dbg(dev->dev, "Failed to write vlan table\n");
+               goto exit;
+       }
+
+       ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
+
+       /* update vlan cache table */
+       dev->vlan_cache[vid].table[0] = vlan_table[0];
+       dev->vlan_cache[vid].table[1] = vlan_table[1];
+       dev->vlan_cache[vid].table[2] = vlan_table[2];
+
+exit:
+       mutex_unlock(&dev->vlan_mutex);
+
+       return ret;
+}
+
+static void ksz9477_read_table(struct ksz_device *dev, u32 *table)
+{
+       ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]);
+       ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]);
+       ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]);
+       ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]);
+}
+
+static void ksz9477_write_table(struct ksz_device *dev, u32 *table)
+{
+       ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]);
+       ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]);
+       ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]);
+       ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]);
+}
+
+static int ksz9477_wait_alu_ready(struct ksz_device *dev, u32 waiton,
+                                 int timeout)
+{
+       u32 data;
+
+       do {
+               ksz_read32(dev, REG_SW_ALU_CTRL__4, &data);
+               if (!(data & waiton))
+                       break;
+               usleep_range(1, 10);
+       } while (timeout-- > 0);
+
+       if (timeout <= 0)
+               return -ETIMEDOUT;
+
+       return 0;
+}
+
+static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev, u32 waiton,
+                                     int timeout)
+{
+       u32 data;
+
+       do {
+               ksz_read32(dev, REG_SW_ALU_STAT_CTRL__4, &data);
+               if (!(data & waiton))
+                       break;
+               usleep_range(1, 10);
+       } while (timeout-- > 0);
+
+       if (timeout <= 0)
+               return -ETIMEDOUT;
+
+       return 0;
+}
+
+static int ksz9477_reset_switch(struct ksz_device *dev)
+{
+       u8 data8;
+       u16 data16;
+       u32 data32;
+
+       /* reset switch */
+       ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
+
+       /* turn off SPI DO Edge select */
+       ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
+       data8 &= ~SPI_AUTO_EDGE_DETECTION;
+       ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
+
+       /* default configuration */
+       ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
+       data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING |
+             SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE;
+       ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
+
+       /* disable interrupts */
+       ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
+       ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
+       ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
+
+       /* set broadcast storm protection 10% rate */
+       ksz_read16(dev, REG_SW_MAC_CTRL_2, &data16);
+       data16 &= ~BROADCAST_STORM_RATE;
+       data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100;
+       ksz_write16(dev, REG_SW_MAC_CTRL_2, data16);
+
+       return 0;
+}
+
+static enum dsa_tag_protocol ksz9477_get_tag_protocol(struct dsa_switch *ds,
+                                                     int port)
+{
+       return DSA_TAG_PROTO_KSZ;
+}
+
+static int ksz9477_phy_read16(struct dsa_switch *ds, int addr, int reg)
+{
+       struct ksz_device *dev = ds->priv;
+       u16 val = 0xffff;
+
+       /* No real PHY after this. Simulate the PHY.
+        * A fixed PHY can be setup in the device tree, but this function is
+        * still called for that port during initialization.
+        * For RGMII PHY there is no way to access it so the fixed PHY should
+        * be used.  For SGMII PHY the supporting code will be added later.
+        */
+       if (addr >= dev->phy_port_cnt) {
+               struct ksz_port *p = &dev->ports[addr];
+
+               switch (reg) {
+               case MII_BMCR:
+                       val = 0x1140;
+                       break;
+               case MII_BMSR:
+                       val = 0x796d;
+                       break;
+               case MII_PHYSID1:
+                       val = 0x0022;
+                       break;
+               case MII_PHYSID2:
+                       val = 0x1631;
+                       break;
+               case MII_ADVERTISE:
+                       val = 0x05e1;
+                       break;
+               case MII_LPA:
+                       val = 0xc5e1;
+                       break;
+               case MII_CTRL1000:
+                       val = 0x0700;
+                       break;
+               case MII_STAT1000:
+                       if (p->phydev.speed == SPEED_1000)
+                               val = 0x3800;
+                       else
+                               val = 0;
+                       break;
+               }
+       } else {
+               ksz_pread16(dev, addr, 0x100 + (reg << 1), &val);
+       }
+
+       return val;
+}
+
+static int ksz9477_phy_write16(struct dsa_switch *ds, int addr, int reg,
+                              u16 val)
+{
+       struct ksz_device *dev = ds->priv;
+
+       /* No real PHY after this. */
+       if (addr >= dev->phy_port_cnt)
+               return 0;
+       ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
+
+       return 0;
+}
+
+static void ksz9477_get_strings(struct dsa_switch *ds, int port,
+                               u32 stringset, uint8_t *buf)
+{
+       int i;
+
+       if (stringset != ETH_SS_STATS)
+               return;
+
+       for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
+               memcpy(buf + i * ETH_GSTRING_LEN, ksz9477_mib_names[i].string,
+                      ETH_GSTRING_LEN);
+       }
+}
+
+static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port,
+                                 uint64_t *buf)
+{
+       struct ksz_device *dev = ds->priv;
+       int i;
+       u32 data;
+       int timeout;
+
+       mutex_lock(&dev->stats_mutex);
+
+       for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
+               data = MIB_COUNTER_READ;
+               data |= ((ksz9477_mib_names[i].index & 0xFF) <<
+                       MIB_COUNTER_INDEX_S);
+               ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
+
+               timeout = 1000;
+               do {
+                       ksz_pread32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
+                                   &data);
+                       usleep_range(1, 10);
+                       if (!(data & MIB_COUNTER_READ))
+                               break;
+               } while (timeout-- > 0);
+
+               /* failed to read MIB. get out of loop */
+               if (!timeout) {
+                       dev_dbg(dev->dev, "Failed to get MIB\n");
+                       break;
+               }
+
+               /* count resets upon read */
+               ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
+
+               dev->mib_value[i] += (uint64_t)data;
+               buf[i] = dev->mib_value[i];
+       }
+
+       mutex_unlock(&dev->stats_mutex);
+}
+
+static void ksz9477_cfg_port_member(struct ksz_device *dev, int port,
+                                   u8 member)
+{
+       ksz_pwrite32(dev, port, REG_PORT_VLAN_MEMBERSHIP__4, member);
+       dev->ports[port].member = member;
+}
+
+static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port,
+                                      u8 state)
+{
+       struct ksz_device *dev = ds->priv;
+       struct ksz_port *p = &dev->ports[port];
+       u8 data;
+       int member = -1;
+
+       ksz_pread8(dev, port, P_STP_CTRL, &data);
+       data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+
+       switch (state) {
+       case BR_STATE_DISABLED:
+               data |= PORT_LEARN_DISABLE;
+               if (port != dev->cpu_port)
+                       member = 0;
+               break;
+       case BR_STATE_LISTENING:
+               data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+               if (port != dev->cpu_port &&
+                   p->stp_state == BR_STATE_DISABLED)
+                       member = dev->host_mask | p->vid_member;
+               break;
+       case BR_STATE_LEARNING:
+               data |= PORT_RX_ENABLE;
+               break;
+       case BR_STATE_FORWARDING:
+               data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
+
+               /* This function is also used internally. */
+               if (port == dev->cpu_port)
+                       break;
+
+               member = dev->host_mask | p->vid_member;
+
+               /* Port is a member of a bridge. */
+               if (dev->br_member & (1 << port)) {
+                       dev->member |= (1 << port);
+                       member = dev->member;
+               }
+               break;
+       case BR_STATE_BLOCKING:
+               data |= PORT_LEARN_DISABLE;
+               if (port != dev->cpu_port &&
+                   p->stp_state == BR_STATE_DISABLED)
+                       member = dev->host_mask | p->vid_member;
+               break;
+       default:
+               dev_err(ds->dev, "invalid STP state: %d\n", state);
+               return;
+       }
+
+       ksz_pwrite8(dev, port, P_STP_CTRL, data);
+       p->stp_state = state;
+       if (data & PORT_RX_ENABLE)
+               dev->rx_ports |= (1 << port);
+       else
+               dev->rx_ports &= ~(1 << port);
+       if (data & PORT_TX_ENABLE)
+               dev->tx_ports |= (1 << port);
+       else
+               dev->tx_ports &= ~(1 << port);
+
+       /* Port membership may share register with STP state. */
+       if (member >= 0 && member != p->member)
+               ksz9477_cfg_port_member(dev, port, (u8)member);
+
+       /* Check if forwarding needs to be updated. */
+       if (state != BR_STATE_FORWARDING) {
+               if (dev->br_member & (1 << port))
+                       dev->member &= ~(1 << port);
+       }
+
+       /* When topology has changed the function ksz_update_port_member
+        * should be called to modify port forwarding behavior.  However
+        * as the offload_fwd_mark indication cannot be reported here
+        * the switch forwarding function is not enabled.
+        */
+}
+
+static void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port)
+{
+       u8 data;
+
+       ksz_read8(dev, REG_SW_LUE_CTRL_2, &data);
+       data &= ~(SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S);
+       data |= (SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S);
+       ksz_write8(dev, REG_SW_LUE_CTRL_2, data);
+       if (port < dev->mib_port_cnt) {
+               /* flush individual port */
+               ksz_pread8(dev, port, P_STP_CTRL, &data);
+               if (!(data & PORT_LEARN_DISABLE))
+                       ksz_pwrite8(dev, port, P_STP_CTRL,
+                                   data | PORT_LEARN_DISABLE);
+               ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true);
+               ksz_pwrite8(dev, port, P_STP_CTRL, data);
+       } else {
+               /* flush all */
+               ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_STP_TABLE, true);
+       }
+}
+
+static int ksz9477_port_vlan_filtering(struct dsa_switch *ds, int port,
+                                      bool flag)
+{
+       struct ksz_device *dev = ds->priv;
+
+       if (flag) {
+               ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
+                            PORT_VLAN_LOOKUP_VID_0, true);
+               ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
+                             true);
+               ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true);
+       } else {
+               ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false);
+               ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
+                             false);
+               ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
+                            PORT_VLAN_LOOKUP_VID_0, false);
+       }
+
+       return 0;
+}
+
+static void ksz9477_port_vlan_add(struct dsa_switch *ds, int port,
+                                 const struct switchdev_obj_port_vlan *vlan)
+{
+       struct ksz_device *dev = ds->priv;
+       u32 vlan_table[3];
+       u16 vid;
+       bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+
+       for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+               if (ksz9477_get_vlan_table(dev, vid, vlan_table)) {
+                       dev_dbg(dev->dev, "Failed to get vlan table\n");
+                       return;
+               }
+
+               vlan_table[0] = VLAN_VALID | (vid & VLAN_FID_M);
+               if (untagged)
+                       vlan_table[1] |= BIT(port);
+               else
+                       vlan_table[1] &= ~BIT(port);
+               vlan_table[1] &= ~(BIT(dev->cpu_port));
+
+               vlan_table[2] |= BIT(port) | BIT(dev->cpu_port);
+
+               if (ksz9477_set_vlan_table(dev, vid, vlan_table)) {
+                       dev_dbg(dev->dev, "Failed to set vlan table\n");
+                       return;
+               }
+
+               /* change PVID */
+               if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
+                       ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vid);
+       }
+}
+
+static int ksz9477_port_vlan_del(struct dsa_switch *ds, int port,
+                                const struct switchdev_obj_port_vlan *vlan)
+{
+       struct ksz_device *dev = ds->priv;
+       bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+       u32 vlan_table[3];
+       u16 vid;
+       u16 pvid;
+
+       ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid);
+       pvid = pvid & 0xFFF;
+
+       for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+               if (ksz9477_get_vlan_table(dev, vid, vlan_table)) {
+                       dev_dbg(dev->dev, "Failed to get vlan table\n");
+                       return -ETIMEDOUT;
+               }
+
+               vlan_table[2] &= ~BIT(port);
+
+               if (pvid == vid)
+                       pvid = 1;
+
+               if (untagged)
+                       vlan_table[1] &= ~BIT(port);
+
+               if (ksz9477_set_vlan_table(dev, vid, vlan_table)) {
+                       dev_dbg(dev->dev, "Failed to set vlan table\n");
+                       return -ETIMEDOUT;
+               }
+       }
+
+       ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid);
+
+       return 0;
+}
+
+static int ksz9477_port_fdb_add(struct dsa_switch *ds, int port,
+                               const unsigned char *addr, u16 vid)
+{
+       struct ksz_device *dev = ds->priv;
+       u32 alu_table[4];
+       u32 data;
+       int ret = 0;
+
+       mutex_lock(&dev->alu_mutex);
+
+       /* find any entry with mac & vid */
+       data = vid << ALU_FID_INDEX_S;
+       data |= ((addr[0] << 8) | addr[1]);
+       ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
+
+       data = ((addr[2] << 24) | (addr[3] << 16));
+       data |= ((addr[4] << 8) | addr[5]);
+       ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
+
+       /* start read operation */
+       ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
+
+       /* wait to be finished */
+       ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
+       if (ret < 0) {
+               dev_dbg(dev->dev, "Failed to read ALU\n");
+               goto exit;
+       }
+
+       /* read ALU entry */
+       ksz9477_read_table(dev, alu_table);
+
+       /* update ALU entry */
+       alu_table[0] = ALU_V_STATIC_VALID;
+       alu_table[1] |= BIT(port);
+       if (vid)
+               alu_table[1] |= ALU_V_USE_FID;
+       alu_table[2] = (vid << ALU_V_FID_S);
+       alu_table[2] |= ((addr[0] << 8) | addr[1]);
+       alu_table[3] = ((addr[2] << 24) | (addr[3] << 16));
+       alu_table[3] |= ((addr[4] << 8) | addr[5]);
+
+       ksz9477_write_table(dev, alu_table);
+
+       ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
+
+       /* wait to be finished */
+       ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
+       if (ret < 0)
+               dev_dbg(dev->dev, "Failed to write ALU\n");
+
+exit:
+       mutex_unlock(&dev->alu_mutex);
+
+       return ret;
+}
+
+static int ksz9477_port_fdb_del(struct dsa_switch *ds, int port,
+                               const unsigned char *addr, u16 vid)
+{
+       struct ksz_device *dev = ds->priv;
+       u32 alu_table[4];
+       u32 data;
+       int ret = 0;
+
+       mutex_lock(&dev->alu_mutex);
+
+       /* read any entry with mac & vid */
+       data = vid << ALU_FID_INDEX_S;
+       data |= ((addr[0] << 8) | addr[1]);
+       ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
+
+       data = ((addr[2] << 24) | (addr[3] << 16));
+       data |= ((addr[4] << 8) | addr[5]);
+       ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
+
+       /* start read operation */
+       ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
+
+       /* wait to be finished */
+       ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
+       if (ret < 0) {
+               dev_dbg(dev->dev, "Failed to read ALU\n");
+               goto exit;
+       }
+
+       ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]);
+       if (alu_table[0] & ALU_V_STATIC_VALID) {
+               ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]);
+               ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]);
+               ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]);
+
+               /* clear forwarding port */
+               alu_table[2] &= ~BIT(port);
+
+               /* if there is no port to forward, clear table */
+               if ((alu_table[2] & ALU_V_PORT_MAP) == 0) {
+                       alu_table[0] = 0;
+                       alu_table[1] = 0;
+                       alu_table[2] = 0;
+                       alu_table[3] = 0;
+               }
+       } else {
+               alu_table[0] = 0;
+               alu_table[1] = 0;
+               alu_table[2] = 0;
+               alu_table[3] = 0;
+       }
+
+       ksz9477_write_table(dev, alu_table);
+
+       ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
+
+       /* wait to be finished */
+       ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
+       if (ret < 0)
+               dev_dbg(dev->dev, "Failed to write ALU\n");
+
+exit:
+       mutex_unlock(&dev->alu_mutex);
+
+       return ret;
+}
+
+static void ksz9477_convert_alu(struct alu_struct *alu, u32 *alu_table)
+{
+       alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID);
+       alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER);
+       alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER);
+       alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) &
+                       ALU_V_PRIO_AGE_CNT_M;
+       alu->mstp = alu_table[0] & ALU_V_MSTP_M;
+
+       alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE);
+       alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID);
+       alu->port_forward = alu_table[1] & ALU_V_PORT_MAP;
+
+       alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M;
+
+       alu->mac[0] = (alu_table[2] >> 8) & 0xFF;
+       alu->mac[1] = alu_table[2] & 0xFF;
+       alu->mac[2] = (alu_table[3] >> 24) & 0xFF;
+       alu->mac[3] = (alu_table[3] >> 16) & 0xFF;
+       alu->mac[4] = (alu_table[3] >> 8) & 0xFF;
+       alu->mac[5] = alu_table[3] & 0xFF;
+}
+
+static int ksz9477_port_fdb_dump(struct dsa_switch *ds, int port,
+                                dsa_fdb_dump_cb_t *cb, void *data)
+{
+       struct ksz_device *dev = ds->priv;
+       int ret = 0;
+       u32 ksz_data;
+       u32 alu_table[4];
+       struct alu_struct alu;
+       int timeout;
+
+       mutex_lock(&dev->alu_mutex);
+
+       /* start ALU search */
+       ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH);
+
+       do {
+               timeout = 1000;
+               do {
+                       ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data);
+                       if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START))
+                               break;
+                       usleep_range(1, 10);
+               } while (timeout-- > 0);
+
+               if (!timeout) {
+                       dev_dbg(dev->dev, "Failed to search ALU\n");
+                       ret = -ETIMEDOUT;
+                       goto exit;
+               }
+
+               /* read ALU table */
+               ksz9477_read_table(dev, alu_table);
+
+               ksz9477_convert_alu(&alu, alu_table);
+
+               if (alu.port_forward & BIT(port)) {
+                       ret = cb(alu.mac, alu.fid, alu.is_static, data);
+                       if (ret)
+                               goto exit;
+               }
+       } while (ksz_data & ALU_START);
+
+exit:
+
+       /* stop ALU search */
+       ksz_write32(dev, REG_SW_ALU_CTRL__4, 0);
+
+       mutex_unlock(&dev->alu_mutex);
+
+       return ret;
+}
+
+static void ksz9477_port_mdb_add(struct dsa_switch *ds, int port,
+                                const struct switchdev_obj_port_mdb *mdb)
+{
+       struct ksz_device *dev = ds->priv;
+       u32 static_table[4];
+       u32 data;
+       int index;
+       u32 mac_hi, mac_lo;
+
+       mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
+       mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
+       mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+
+       mutex_lock(&dev->alu_mutex);
+
+       for (index = 0; index < dev->num_statics; index++) {
+               /* find empty slot first */
+               data = (index << ALU_STAT_INDEX_S) |
+                       ALU_STAT_READ | ALU_STAT_START;
+               ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+               /* wait to be finished */
+               if (ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0) {
+                       dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+                       goto exit;
+               }
+
+               /* read ALU static table */
+               ksz9477_read_table(dev, static_table);
+
+               if (static_table[0] & ALU_V_STATIC_VALID) {
+                       /* check this has same vid & mac address */
+                       if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
+                           ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
+                           static_table[3] == mac_lo) {
+                               /* found matching one */
+                               break;
+                       }
+               } else {
+                       /* found empty one */
+                       break;
+               }
+       }
+
+       /* no available entry */
+       if (index == dev->num_statics)
+               goto exit;
+
+       /* add entry */
+       static_table[0] = ALU_V_STATIC_VALID;
+       static_table[1] |= BIT(port);
+       if (mdb->vid)
+               static_table[1] |= ALU_V_USE_FID;
+       static_table[2] = (mdb->vid << ALU_V_FID_S);
+       static_table[2] |= mac_hi;
+       static_table[3] = mac_lo;
+
+       ksz9477_write_table(dev, static_table);
+
+       data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
+       ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+       /* wait to be finished */
+       if (ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0)
+               dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+
+exit:
+       mutex_unlock(&dev->alu_mutex);
+}
+
+static int ksz9477_port_mdb_del(struct dsa_switch *ds, int port,
+                               const struct switchdev_obj_port_mdb *mdb)
+{
+       struct ksz_device *dev = ds->priv;
+       u32 static_table[4];
+       u32 data;
+       int index;
+       int ret = 0;
+       u32 mac_hi, mac_lo;
+
+       mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
+       mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
+       mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+
+       mutex_lock(&dev->alu_mutex);
+
+       for (index = 0; index < dev->num_statics; index++) {
+               /* find empty slot first */
+               data = (index << ALU_STAT_INDEX_S) |
+                       ALU_STAT_READ | ALU_STAT_START;
+               ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+               /* wait to be finished */
+               ret = ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
+               if (ret < 0) {
+                       dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+                       goto exit;
+               }
+
+               /* read ALU static table */
+               ksz9477_read_table(dev, static_table);
+
+               if (static_table[0] & ALU_V_STATIC_VALID) {
+                       /* check this has same vid & mac address */
+
+                       if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
+                           ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
+                           static_table[3] == mac_lo) {
+                               /* found matching one */
+                               break;
+                       }
+               }
+       }
+
+       /* no available entry */
+       if (index == dev->num_statics)
+               goto exit;
+
+       /* clear port */
+       static_table[1] &= ~BIT(port);
+
+       if ((static_table[1] & ALU_V_PORT_MAP) == 0) {
+               /* delete entry */
+               static_table[0] = 0;
+               static_table[1] = 0;
+               static_table[2] = 0;
+               static_table[3] = 0;
+       }
+
+       ksz9477_write_table(dev, static_table);
+
+       data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
+       ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+       /* wait to be finished */
+       ret = ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
+       if (ret < 0)
+               dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+
+exit:
+       mutex_unlock(&dev->alu_mutex);
+
+       return ret;
+}
+
+static int ksz9477_port_mirror_add(struct dsa_switch *ds, int port,
+                                  struct dsa_mall_mirror_tc_entry *mirror,
+                                  bool ingress)
+{
+       struct ksz_device *dev = ds->priv;
+
+       if (ingress)
+               ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
+       else
+               ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
+
+       ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
+
+       /* configure mirror port */
+       ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+                    PORT_MIRROR_SNIFFER, true);
+
+       ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+
+       return 0;
+}
+
+static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port,
+                                   struct dsa_mall_mirror_tc_entry *mirror)
+{
+       struct ksz_device *dev = ds->priv;
+       u8 data;
+
+       if (mirror->ingress)
+               ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
+       else
+               ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
+
+       ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
+
+       if (!(data & (PORT_MIRROR_RX | PORT_MIRROR_TX)))
+               ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+                            PORT_MIRROR_SNIFFER, false);
+}
+
+static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
+{
+       u8 data8;
+       u8 member;
+       u16 data16;
+       struct ksz_port *p = &dev->ports[port];
+
+       /* enable tag tail for host port */
+       if (cpu_port)
+               ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
+                            true);
+
+       ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
+
+       /* set back pressure */
+       ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true);
+
+       /* enable broadcast storm limit */
+       ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
+
+       /* disable DiffServ priority */
+       ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false);
+
+       /* replace priority */
+       ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
+                    false);
+       ksz9477_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
+                          MTI_PVID_REPLACE, false);
+
+       /* enable 802.1p priority */
+       ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
+
+       if (port < dev->phy_port_cnt) {
+               /* do not force flow control */
+               ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
+                            PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
+                            false);
+
+       } else {
+               /* force flow control */
+               ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
+                            PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
+                            true);
+
+               /* configure MAC to 1G & RGMII mode */
+               ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
+               data8 &= ~PORT_MII_NOT_1GBIT;
+               data8 &= ~PORT_MII_SEL_M;
+               switch (dev->interface) {
+               case PHY_INTERFACE_MODE_MII:
+                       data8 |= PORT_MII_NOT_1GBIT;
+                       data8 |= PORT_MII_SEL;
+                       p->phydev.speed = SPEED_100;
+                       break;
+               case PHY_INTERFACE_MODE_RMII:
+                       data8 |= PORT_MII_NOT_1GBIT;
+                       data8 |= PORT_RMII_SEL;
+                       p->phydev.speed = SPEED_100;
+                       break;
+               case PHY_INTERFACE_MODE_GMII:
+                       data8 |= PORT_GMII_SEL;
+                       p->phydev.speed = SPEED_1000;
+                       break;
+               default:
+                       data8 &= ~PORT_RGMII_ID_IG_ENABLE;
+                       data8 &= ~PORT_RGMII_ID_EG_ENABLE;
+                       if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+                           dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+                               data8 |= PORT_RGMII_ID_IG_ENABLE;
+                       if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+                           dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+                               data8 |= PORT_RGMII_ID_EG_ENABLE;
+                       data8 |= PORT_RGMII_SEL;
+                       p->phydev.speed = SPEED_1000;
+                       break;
+               }
+               ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
+               p->phydev.duplex = 1;
+       }
+       if (cpu_port) {
+               member = dev->port_mask;
+               dev->on_ports = dev->host_mask;
+               dev->live_ports = dev->host_mask;
+       } else {
+               member = dev->host_mask | p->vid_member;
+               dev->on_ports |= (1 << port);
+
+               /* Link was detected before port is enabled. */
+               if (p->phydev.link)
+                       dev->live_ports |= (1 << port);
+       }
+       ksz9477_cfg_port_member(dev, port, member);
+
+       /* clear pending interrupts */
+       if (port < dev->phy_port_cnt)
+               ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16);
+}
+
+static void ksz9477_config_cpu_port(struct dsa_switch *ds)
+{
+       struct ksz_device *dev = ds->priv;
+       struct ksz_port *p;
+       int i;
+
+       ds->num_ports = dev->port_cnt;
+
+       for (i = 0; i < dev->port_cnt; i++) {
+               if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) {
+                       dev->cpu_port = i;
+                       dev->host_mask = (1 << dev->cpu_port);
+                       dev->port_mask |= dev->host_mask;
+
+                       /* enable cpu port */
+                       ksz9477_port_setup(dev, i, true);
+                       p = &dev->ports[dev->cpu_port];
+                       p->vid_member = dev->port_mask;
+                       p->on = 1;
+               }
+       }
+
+       dev->member = dev->host_mask;
+
+       for (i = 0; i < dev->mib_port_cnt; i++) {
+               if (i == dev->cpu_port)
+                       continue;
+               p = &dev->ports[i];
+
+               /* Initialize to non-zero so that ksz_cfg_port_member() will
+                * be called.
+                */
+               p->vid_member = (1 << i);
+               p->member = dev->port_mask;
+               ksz9477_port_stp_state_set(ds, i, BR_STATE_DISABLED);
+               p->on = 1;
+               if (i < dev->phy_port_cnt)
+                       p->phy = 1;
+               if (dev->chip_id == 0x00947700 && i == 6) {
+                       p->sgmii = 1;
+
+                       /* SGMII PHY detection code is not implemented yet. */
+                       p->phy = 0;
+               }
+       }
+}
+
+static int ksz9477_setup(struct dsa_switch *ds)
+{
+       struct ksz_device *dev = ds->priv;
+       int ret = 0;
+
+       dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
+                                      dev->num_vlans, GFP_KERNEL);
+       if (!dev->vlan_cache)
+               return -ENOMEM;
+
+       ret = ksz9477_reset_switch(dev);
+       if (ret) {
+               dev_err(ds->dev, "failed to reset switch\n");
+               return ret;
+       }
+
+       /* accept packet up to 2000bytes */
+       ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true);
+
+       ksz9477_config_cpu_port(ds);
+
+       ksz_cfg(dev, REG_SW_MAC_CTRL_1, MULTICAST_STORM_DISABLE, true);
+
+       /* queue based egress rate limit */
+       ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true);
+
+       /* start switch */
+       ksz_cfg(dev, REG_SW_OPERATION, SW_START, true);
+
+       return 0;
+}
+
+static const struct dsa_switch_ops ksz9477_switch_ops = {
+       .get_tag_protocol       = ksz9477_get_tag_protocol,
+       .setup                  = ksz9477_setup,
+       .phy_read               = ksz9477_phy_read16,
+       .phy_write              = ksz9477_phy_write16,
+       .port_enable            = ksz_enable_port,
+       .port_disable           = ksz_disable_port,
+       .get_strings            = ksz9477_get_strings,
+       .get_ethtool_stats      = ksz_get_ethtool_stats,
+       .get_sset_count         = ksz_sset_count,
+       .port_bridge_join       = ksz_port_bridge_join,
+       .port_bridge_leave      = ksz_port_bridge_leave,
+       .port_stp_state_set     = ksz9477_port_stp_state_set,
+       .port_fast_age          = ksz_port_fast_age,
+       .port_vlan_filtering    = ksz9477_port_vlan_filtering,
+       .port_vlan_prepare      = ksz_port_vlan_prepare,
+       .port_vlan_add          = ksz9477_port_vlan_add,
+       .port_vlan_del          = ksz9477_port_vlan_del,
+       .port_fdb_dump          = ksz9477_port_fdb_dump,
+       .port_fdb_add           = ksz9477_port_fdb_add,
+       .port_fdb_del           = ksz9477_port_fdb_del,
+       .port_mdb_prepare       = ksz_port_mdb_prepare,
+       .port_mdb_add           = ksz9477_port_mdb_add,
+       .port_mdb_del           = ksz9477_port_mdb_del,
+       .port_mirror_add        = ksz9477_port_mirror_add,
+       .port_mirror_del        = ksz9477_port_mirror_del,
+};
+
+static u32 ksz9477_get_port_addr(int port, int offset)
+{
+       return PORT_CTRL_ADDR(port, offset);
+}
+
+static int ksz9477_switch_detect(struct ksz_device *dev)
+{
+       u8 data8;
+       u32 id32;
+       int ret;
+
+       /* turn off SPI DO Edge select */
+       ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
+       if (ret)
+               return ret;
+
+       data8 &= ~SPI_AUTO_EDGE_DETECTION;
+       ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
+       if (ret)
+               return ret;
+
+       /* read chip id */
+       ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32);
+       if (ret)
+               return ret;
+
+       /* Number of ports can be reduced depending on chip. */
+       dev->mib_port_cnt = TOTAL_PORT_NUM;
+       dev->phy_port_cnt = 5;
+
+       dev->chip_id = id32;
+
+       return 0;
+}
+
+struct ksz_chip_data {
+       u32 chip_id;
+       const char *dev_name;
+       int num_vlans;
+       int num_alus;
+       int num_statics;
+       int cpu_ports;
+       int port_cnt;
+};
+
+static const struct ksz_chip_data ksz9477_switch_chips[] = {
+       {
+               .chip_id = 0x00947700,
+               .dev_name = "KSZ9477",
+               .num_vlans = 4096,
+               .num_alus = 4096,
+               .num_statics = 16,
+               .cpu_ports = 0x7F,      /* can be configured as cpu port */
+               .port_cnt = 7,          /* total physical port count */
+       },
+       {
+               .chip_id = 0x00989700,
+               .dev_name = "KSZ9897",
+               .num_vlans = 4096,
+               .num_alus = 4096,
+               .num_statics = 16,
+               .cpu_ports = 0x7F,      /* can be configured as cpu port */
+               .port_cnt = 7,          /* total physical port count */
+       },
+};
+
+static int ksz9477_switch_init(struct ksz_device *dev)
+{
+       int i;
+
+       dev->ds->ops = &ksz9477_switch_ops;
+
+       for (i = 0; i < ARRAY_SIZE(ksz9477_switch_chips); i++) {
+               const struct ksz_chip_data *chip = &ksz9477_switch_chips[i];
+
+               if (dev->chip_id == chip->chip_id) {
+                       dev->name = chip->dev_name;
+                       dev->num_vlans = chip->num_vlans;
+                       dev->num_alus = chip->num_alus;
+                       dev->num_statics = chip->num_statics;
+                       dev->port_cnt = chip->port_cnt;
+                       dev->cpu_ports = chip->cpu_ports;
+
+                       break;
+               }
+       }
+
+       /* no switch found */
+       if (!dev->port_cnt)
+               return -ENODEV;
+
+       dev->port_mask = (1 << dev->port_cnt) - 1;
+
+       dev->reg_mib_cnt = SWITCH_COUNTER_NUM;
+       dev->mib_cnt = TOTAL_SWITCH_COUNTER_NUM;
+
+       i = dev->mib_port_cnt;
+       dev->ports = devm_kzalloc(dev->dev, sizeof(struct ksz_port) * i,
+                                 GFP_KERNEL);
+       if (!dev->ports)
+               return -ENOMEM;
+       for (i = 0; i < dev->mib_port_cnt; i++) {
+               dev->ports[i].mib.counters =
+                       devm_kzalloc(dev->dev,
+                                    sizeof(u64) *
+                                    (TOTAL_SWITCH_COUNTER_NUM + 1),
+                                    GFP_KERNEL);
+               if (!dev->ports[i].mib.counters)
+                       return -ENOMEM;
+       }
+       dev->interface = PHY_INTERFACE_MODE_RGMII_TXID;
+
+       return 0;
+}
+
+static void ksz9477_switch_exit(struct ksz_device *dev)
+{
+       ksz9477_reset_switch(dev);
+}
+
+static const struct ksz_dev_ops ksz9477_dev_ops = {
+       .get_port_addr = ksz9477_get_port_addr,
+       .cfg_port_member = ksz9477_cfg_port_member,
+       .flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
+       .port_setup = ksz9477_port_setup,
+       .shutdown = ksz9477_reset_switch,
+       .detect = ksz9477_switch_detect,
+       .init = ksz9477_switch_init,
+       .exit = ksz9477_switch_exit,
+};
+
+int ksz9477_switch_register(struct ksz_device *dev)
+{
+       return ksz_switch_register(dev, &ksz9477_dev_ops);
+}
+EXPORT_SYMBOL(ksz9477_switch_register);
+
+MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>");
+MODULE_DESCRIPTION("Microchip KSZ9477 Series Switch DSA Driver");
+MODULE_LICENSE("GPL");
index dc70f48..d757ba1 100644 (file)
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Microchip KSZ series register access through SPI
+ * Microchip KSZ9477 series register access through SPI
  *
  * Copyright (C) 2017-2018 Microchip Technology Inc.
  */
@@ -13,6 +13,7 @@
 #include <linux/spi/spi.h>
 
 #include "ksz_priv.h"
+#include "ksz_spi.h"
 
 /* SPI frame opcodes */
 #define KS_SPIOP_RD                    3
 #define SPI_ADDR_MASK                  (BIT(SPI_ADDR_SHIFT) - 1)
 #define SPI_TURNAROUND_SHIFT           5
 
-static int ksz_spi_read_reg(struct spi_device *spi, u32 reg, u8 *val,
-                           unsigned int len)
+/* Enough to read all switch port registers. */
+#define SPI_TX_BUF_LEN                 0x100
+
+static int ksz9477_spi_read_reg(struct spi_device *spi, u32 reg, u8 *val,
+                               unsigned int len)
 {
        u32 txbuf;
        int ret;
@@ -37,27 +41,36 @@ static int ksz_spi_read_reg(struct spi_device *spi, u32 reg, u8 *val,
        return ret;
 }
 
-static int ksz_spi_read(struct ksz_device *dev, u32 reg, u8 *data,
-                       unsigned int len)
+static int ksz9477_spi_write_reg(struct spi_device *spi, u32 reg, u8 *val,
+                                unsigned int len)
 {
-       struct spi_device *spi = dev->priv;
+       u32 *txbuf = (u32 *)val;
 
-       return ksz_spi_read_reg(spi, reg, data, len);
+       *txbuf = reg & SPI_ADDR_MASK;
+       *txbuf |= (KS_SPIOP_WR << SPI_ADDR_SHIFT);
+       *txbuf <<= SPI_TURNAROUND_SHIFT;
+       *txbuf = cpu_to_be32(*txbuf);
+
+       return spi_write(spi, txbuf, 4 + len);
 }
 
-static int ksz_spi_read8(struct ksz_device *dev, u32 reg, u8 *val)
+static int ksz_spi_read(struct ksz_device *dev, u32 reg, u8 *data,
+                       unsigned int len)
 {
-       return ksz_spi_read(dev, reg, val, 1);
+       struct spi_device *spi = dev->priv;
+
+       return ksz9477_spi_read_reg(spi, reg, data, len);
 }
 
-static int ksz_spi_read16(struct ksz_device *dev, u32 reg, u16 *val)
+static int ksz_spi_write(struct ksz_device *dev, u32 reg, void *data,
+                        unsigned int len)
 {
-       int ret = ksz_spi_read(dev, reg, (u8 *)val, 2);
-
-       if (!ret)
-               *val = be16_to_cpu(*val);
+       struct spi_device *spi = dev->priv;
 
-       return ret;
+       if (len > SPI_TX_BUF_LEN)
+               len = SPI_TX_BUF_LEN;
+       memcpy(&dev->txbuf[4], data, len);
+       return ksz9477_spi_write_reg(spi, reg, dev->txbuf, len);
 }
 
 static int ksz_spi_read24(struct ksz_device *dev, u32 reg, u32 *val)
@@ -75,72 +88,15 @@ static int ksz_spi_read24(struct ksz_device *dev, u32 reg, u32 *val)
        return ret;
 }
 
-static int ksz_spi_read32(struct ksz_device *dev, u32 reg, u32 *val)
-{
-       int ret = ksz_spi_read(dev, reg, (u8 *)val, 4);
-
-       if (!ret)
-               *val = be32_to_cpu(*val);
-
-       return ret;
-}
-
-static int ksz_spi_write_reg(struct spi_device *spi, u32 reg, u8 *val,
-                            unsigned int len)
-{
-       u32 txbuf;
-       u8 data[12];
-       int i;
-
-       txbuf = reg & SPI_ADDR_MASK;
-       txbuf |= (KS_SPIOP_WR << SPI_ADDR_SHIFT);
-       txbuf <<= SPI_TURNAROUND_SHIFT;
-       txbuf = cpu_to_be32(txbuf);
-
-       data[0] = txbuf & 0xFF;
-       data[1] = (txbuf & 0xFF00) >> 8;
-       data[2] = (txbuf & 0xFF0000) >> 16;
-       data[3] = (txbuf & 0xFF000000) >> 24;
-       for (i = 0; i < len; i++)
-               data[i + 4] = val[i];
-
-       return spi_write(spi, &data, 4 + len);
-}
-
-static int ksz_spi_write8(struct ksz_device *dev, u32 reg, u8 value)
-{
-       struct spi_device *spi = dev->priv;
-
-       return ksz_spi_write_reg(spi, reg, &value, 1);
-}
-
-static int ksz_spi_write16(struct ksz_device *dev, u32 reg, u16 value)
-{
-       struct spi_device *spi = dev->priv;
-
-       value = cpu_to_be16(value);
-       return ksz_spi_write_reg(spi, reg, (u8 *)&value, 2);
-}
-
 static int ksz_spi_write24(struct ksz_device *dev, u32 reg, u32 value)
 {
-       struct spi_device *spi = dev->priv;
-
        /* make it to big endian 24bit from MSB */
        value <<= 8;
        value = cpu_to_be32(value);
-       return ksz_spi_write_reg(spi, reg, (u8 *)&value, 3);
+       return ksz_spi_write(dev, reg, &value, 3);
 }
 
-static int ksz_spi_write32(struct ksz_device *dev, u32 reg, u32 value)
-{
-       struct spi_device *spi = dev->priv;
-
-       value = cpu_to_be32(value);
-       return ksz_spi_write_reg(spi, reg, (u8 *)&value, 4);
-}
-
-static const struct ksz_io_ops ksz_spi_ops = {
+static const struct ksz_io_ops ksz9477_spi_ops = {
        .read8 = ksz_spi_read8,
        .read16 = ksz_spi_read16,
        .read24 = ksz_spi_read24,
@@ -149,21 +105,27 @@ static const struct ksz_io_ops ksz_spi_ops = {
        .write16 = ksz_spi_write16,
        .write24 = ksz_spi_write24,
        .write32 = ksz_spi_write32,
+       .get = ksz_spi_get,
+       .set = ksz_spi_set,
 };
 
-static int ksz_spi_probe(struct spi_device *spi)
+static int ksz9477_spi_probe(struct spi_device *spi)
 {
        struct ksz_device *dev;
        int ret;
 
-       dev = ksz_switch_alloc(&spi->dev, &ksz_spi_ops, spi);
+       dev = ksz_switch_alloc(&spi->dev, &ksz9477_spi_ops, spi);
        if (!dev)
                return -ENOMEM;
 
        if (spi->dev.platform_data)
                dev->pdata = spi->dev.platform_data;
 
-       ret = ksz_switch_register(dev);
+       dev->txbuf = devm_kzalloc(dev->dev, 4 + SPI_TX_BUF_LEN, GFP_KERNEL);
+
+       ret = ksz9477_switch_register(dev);
+
+       /* Main DSA driver may not be started yet. */
        if (ret)
                return ret;
 
@@ -172,7 +134,7 @@ static int ksz_spi_probe(struct spi_device *spi)
        return 0;
 }
 
-static int ksz_spi_remove(struct spi_device *spi)
+static int ksz9477_spi_remove(struct spi_device *spi)
 {
        struct ksz_device *dev = spi_get_drvdata(spi);
 
@@ -182,25 +144,34 @@ static int ksz_spi_remove(struct spi_device *spi)
        return 0;
 }
 
-static const struct of_device_id ksz_dt_ids[] = {
+static void ksz9477_spi_shutdown(struct spi_device *spi)
+{
+       struct ksz_device *dev = spi_get_drvdata(spi);
+
+       if (dev && dev->dev_ops->shutdown)
+               dev->dev_ops->shutdown(dev);
+}
+
+static const struct of_device_id ksz9477_dt_ids[] = {
        { .compatible = "microchip,ksz9477" },
        { .compatible = "microchip,ksz9897" },
        {},
 };
-MODULE_DEVICE_TABLE(of, ksz_dt_ids);
+MODULE_DEVICE_TABLE(of, ksz9477_dt_ids);
 
-static struct spi_driver ksz_spi_driver = {
+static struct spi_driver ksz9477_spi_driver = {
        .driver = {
                .name   = "ksz9477-switch",
                .owner  = THIS_MODULE,
-               .of_match_table = of_match_ptr(ksz_dt_ids),
+               .of_match_table = of_match_ptr(ksz9477_dt_ids),
        },
-       .probe  = ksz_spi_probe,
-       .remove = ksz_spi_remove,
+       .probe  = ksz9477_spi_probe,
+       .remove = ksz9477_spi_remove,
+       .shutdown = ksz9477_spi_shutdown,
 };
 
-module_spi_driver(ksz_spi_driver);
+module_spi_driver(ksz9477_spi_driver);
 
 MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>");
-MODULE_DESCRIPTION("Microchip KSZ Series Switch SPI access Driver");
+MODULE_DESCRIPTION("Microchip KSZ9477 Series Switch SPI access Driver");
 MODULE_LICENSE("GPL");
index 50b24dc..9705808 100644 (file)
 #include <linux/phy.h>
 #include <linux/etherdevice.h>
 #include <linux/if_bridge.h>
+#include <linux/of_net.h>
 #include <net/dsa.h>
 #include <net/switchdev.h>
 
 #include "ksz_priv.h"
 
-static const struct {
-       int index;
-       char string[ETH_GSTRING_LEN];
-} mib_names[TOTAL_SWITCH_COUNTER_NUM] = {
-       { 0x00, "rx_hi" },
-       { 0x01, "rx_undersize" },
-       { 0x02, "rx_fragments" },
-       { 0x03, "rx_oversize" },
-       { 0x04, "rx_jabbers" },
-       { 0x05, "rx_symbol_err" },
-       { 0x06, "rx_crc_err" },
-       { 0x07, "rx_align_err" },
-       { 0x08, "rx_mac_ctrl" },
-       { 0x09, "rx_pause" },
-       { 0x0A, "rx_bcast" },
-       { 0x0B, "rx_mcast" },
-       { 0x0C, "rx_ucast" },
-       { 0x0D, "rx_64_or_less" },
-       { 0x0E, "rx_65_127" },
-       { 0x0F, "rx_128_255" },
-       { 0x10, "rx_256_511" },
-       { 0x11, "rx_512_1023" },
-       { 0x12, "rx_1024_1522" },
-       { 0x13, "rx_1523_2000" },
-       { 0x14, "rx_2001" },
-       { 0x15, "tx_hi" },
-       { 0x16, "tx_late_col" },
-       { 0x17, "tx_pause" },
-       { 0x18, "tx_bcast" },
-       { 0x19, "tx_mcast" },
-       { 0x1A, "tx_ucast" },
-       { 0x1B, "tx_deferred" },
-       { 0x1C, "tx_total_col" },
-       { 0x1D, "tx_exc_col" },
-       { 0x1E, "tx_single_col" },
-       { 0x1F, "tx_mult_col" },
-       { 0x80, "rx_total" },
-       { 0x81, "tx_total" },
-       { 0x82, "rx_discards" },
-       { 0x83, "tx_discards" },
-};
-
-static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
-{
-       u8 data;
-
-       ksz_read8(dev, addr, &data);
-       if (set)
-               data |= bits;
-       else
-               data &= ~bits;
-       ksz_write8(dev, addr, data);
-}
-
-static void ksz_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set)
-{
-       u32 data;
-
-       ksz_read32(dev, addr, &data);
-       if (set)
-               data |= bits;
-       else
-               data &= ~bits;
-       ksz_write32(dev, addr, data);
-}
-
-static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
-                        bool set)
-{
-       u32 addr;
-       u8 data;
-
-       addr = PORT_CTRL_ADDR(port, offset);
-       ksz_read8(dev, addr, &data);
-
-       if (set)
-               data |= bits;
-       else
-               data &= ~bits;
-
-       ksz_write8(dev, addr, data);
-}
-
-static void ksz_port_cfg32(struct ksz_device *dev, int port, int offset,
-                          u32 bits, bool set)
-{
-       u32 addr;
-       u32 data;
-
-       addr = PORT_CTRL_ADDR(port, offset);
-       ksz_read32(dev, addr, &data);
-
-       if (set)
-               data |= bits;
-       else
-               data &= ~bits;
-
-       ksz_write32(dev, addr, data);
-}
-
-static int wait_vlan_ctrl_ready(struct ksz_device *dev, u32 waiton, int timeout)
-{
-       u8 data;
-
-       do {
-               ksz_read8(dev, REG_SW_VLAN_CTRL, &data);
-               if (!(data & waiton))
-                       break;
-               usleep_range(1, 10);
-       } while (timeout-- > 0);
-
-       if (timeout <= 0)
-               return -ETIMEDOUT;
-
-       return 0;
-}
-
-static int get_vlan_table(struct dsa_switch *ds, u16 vid, u32 *vlan_table)
-{
-       struct ksz_device *dev = ds->priv;
-       int ret;
-
-       mutex_lock(&dev->vlan_mutex);
-
-       ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
-       ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START);
-
-       /* wait to be cleared */
-       ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
-       if (ret < 0) {
-               dev_dbg(dev->dev, "Failed to read vlan table\n");
-               goto exit;
-       }
-
-       ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]);
-       ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]);
-       ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]);
-
-       ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
-
-exit:
-       mutex_unlock(&dev->vlan_mutex);
-
-       return ret;
-}
-
-static int set_vlan_table(struct dsa_switch *ds, u16 vid, u32 *vlan_table)
-{
-       struct ksz_device *dev = ds->priv;
-       int ret;
-
-       mutex_lock(&dev->vlan_mutex);
-
-       ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]);
-       ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]);
-       ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]);
-
-       ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
-       ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE);
-
-       /* wait to be cleared */
-       ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
-       if (ret < 0) {
-               dev_dbg(dev->dev, "Failed to write vlan table\n");
-               goto exit;
-       }
-
-       ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
-
-       /* update vlan cache table */
-       dev->vlan_cache[vid].table[0] = vlan_table[0];
-       dev->vlan_cache[vid].table[1] = vlan_table[1];
-       dev->vlan_cache[vid].table[2] = vlan_table[2];
-
-exit:
-       mutex_unlock(&dev->vlan_mutex);
-
-       return ret;
-}
-
-static void read_table(struct dsa_switch *ds, u32 *table)
-{
-       struct ksz_device *dev = ds->priv;
-
-       ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]);
-       ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]);
-       ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]);
-       ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]);
-}
-
-static void write_table(struct dsa_switch *ds, u32 *table)
-{
-       struct ksz_device *dev = ds->priv;
-
-       ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]);
-       ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]);
-       ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]);
-       ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]);
-}
-
-static int wait_alu_ready(struct ksz_device *dev, u32 waiton, int timeout)
-{
-       u32 data;
-
-       do {
-               ksz_read32(dev, REG_SW_ALU_CTRL__4, &data);
-               if (!(data & waiton))
-                       break;
-               usleep_range(1, 10);
-       } while (timeout-- > 0);
-
-       if (timeout <= 0)
-               return -ETIMEDOUT;
-
-       return 0;
-}
-
-static int wait_alu_sta_ready(struct ksz_device *dev, u32 waiton, int timeout)
-{
-       u32 data;
-
-       do {
-               ksz_read32(dev, REG_SW_ALU_STAT_CTRL__4, &data);
-               if (!(data & waiton))
-                       break;
-               usleep_range(1, 10);
-       } while (timeout-- > 0);
-
-       if (timeout <= 0)
-               return -ETIMEDOUT;
-
-       return 0;
-}
-
-static int ksz9477_reset_switch(struct ksz_device *dev)
-{
-       u8 data8;
-       u16 data16;
-       u32 data32;
-
-       /* reset switch */
-       ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
-
-       /* turn off SPI DO Edge select */
-       ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
-       data8 &= ~SPI_AUTO_EDGE_DETECTION;
-       ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
-
-       /* default configuration */
-       ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
-       data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING |
-             SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE;
-       ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
-
-       /* disable interrupts */
-       ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
-       ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
-       ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
-
-       /* set broadcast storm protection 10% rate */
-       ksz_read16(dev, REG_SW_MAC_CTRL_2, &data16);
-       data16 &= ~BROADCAST_STORM_RATE;
-       data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100;
-       ksz_write16(dev, REG_SW_MAC_CTRL_2, data16);
-
-       return 0;
-}
-
-static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
-{
-       u8 data8;
-       u16 data16;
-
-       /* enable tag tail for host port */
-       if (cpu_port)
-               ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
-                            true);
-
-       ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
-
-       /* set back pressure */
-       ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true);
-
-       /* set flow control */
-       ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
-                    PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, true);
-
-       /* enable broadcast storm limit */
-       ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
-
-       /* disable DiffServ priority */
-       ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false);
-
-       /* replace priority */
-       ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
-                    false);
-       ksz_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
-                      MTI_PVID_REPLACE, false);
-
-       /* enable 802.1p priority */
-       ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
-
-       /* configure MAC to 1G & RGMII mode */
-       ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
-       data8 |= PORT_RGMII_ID_EG_ENABLE;
-       data8 &= ~PORT_MII_NOT_1GBIT;
-       data8 &= ~PORT_MII_SEL_M;
-       data8 |= PORT_RGMII_SEL;
-       ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
-
-       /* clear pending interrupts */
-       ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16);
-}
-
-static void ksz9477_config_cpu_port(struct dsa_switch *ds)
+void ksz_update_port_member(struct ksz_device *dev, int port)
 {
-       struct ksz_device *dev = ds->priv;
+       struct ksz_port *p;
        int i;
 
-       ds->num_ports = dev->port_cnt;
-
-       for (i = 0; i < ds->num_ports; i++) {
-               if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) {
-                       dev->cpu_port = i;
-
-                       /* enable cpu port */
-                       ksz9477_port_setup(dev, i, true);
-               }
+       for (i = 0; i < dev->port_cnt; i++) {
+               if (i == port || i == dev->cpu_port)
+                       continue;
+               p = &dev->ports[i];
+               if (!(dev->member & (1 << i)))
+                       continue;
+
+               /* Port is a member of the bridge and is forwarding. */
+               if (p->stp_state == BR_STATE_FORWARDING &&
+                   p->member != dev->member)
+                       dev->dev_ops->cfg_port_member(dev, i, dev->member);
        }
 }
+EXPORT_SYMBOL_GPL(ksz_update_port_member);
 
-static int ksz9477_setup(struct dsa_switch *ds)
+int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg)
 {
        struct ksz_device *dev = ds->priv;
-       int ret = 0;
-
-       dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
-                                      dev->num_vlans, GFP_KERNEL);
-       if (!dev->vlan_cache)
-               return -ENOMEM;
-
-       ret = ksz9477_reset_switch(dev);
-       if (ret) {
-               dev_err(ds->dev, "failed to reset switch\n");
-               return ret;
-       }
-
-       /* accept packet up to 2000bytes */
-       ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true);
-
-       ksz9477_config_cpu_port(ds);
-
-       ksz_cfg(dev, REG_SW_MAC_CTRL_1, MULTICAST_STORM_DISABLE, true);
-
-       /* queue based egress rate limit */
-       ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true);
+       u16 val = 0xffff;
 
-       /* start switch */
-       ksz_cfg(dev, REG_SW_OPERATION, SW_START, true);
-
-       return 0;
-}
-
-static enum dsa_tag_protocol ksz9477_get_tag_protocol(struct dsa_switch *ds,
-                                                     int port)
-{
-       return DSA_TAG_PROTO_KSZ;
-}
-
-static int ksz9477_phy_read16(struct dsa_switch *ds, int addr, int reg)
-{
-       struct ksz_device *dev = ds->priv;
-       u16 val = 0;
-
-       ksz_pread16(dev, addr, 0x100 + (reg << 1), &val);
+       dev->dev_ops->r_phy(dev, addr, reg, &val);
 
        return val;
 }
+EXPORT_SYMBOL_GPL(ksz_phy_read16);
 
-static int ksz9477_phy_write16(struct dsa_switch *ds, int addr, int reg,
-                              u16 val)
-{
-       struct ksz_device *dev = ds->priv;
-
-       ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
-
-       return 0;
-}
-
-static int ksz_enable_port(struct dsa_switch *ds, int port,
-                          struct phy_device *phy)
+int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
 {
        struct ksz_device *dev = ds->priv;
 
-       /* setup slave port */
-       ksz9477_port_setup(dev, port, false);
+       dev->dev_ops->w_phy(dev, addr, reg, val);
 
        return 0;
 }
+EXPORT_SYMBOL_GPL(ksz_phy_write16);
 
-static void ksz_disable_port(struct dsa_switch *ds, int port,
-                            struct phy_device *phy)
+int ksz_sset_count(struct dsa_switch *ds, int port, int sset)
 {
        struct ksz_device *dev = ds->priv;
 
-       /* there is no port disable */
-       ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, true);
-}
-
-static int ksz_sset_count(struct dsa_switch *ds, int port, int sset)
-{
        if (sset != ETH_SS_STATS)
                return 0;
 
-       return TOTAL_SWITCH_COUNTER_NUM;
+       return dev->mib_cnt;
 }
+EXPORT_SYMBOL_GPL(ksz_sset_count);
 
-static void ksz9477_get_strings(struct dsa_switch *ds, int port,
-                               u32 stringset, uint8_t *buf)
-{
-       int i;
-
-       if (stringset != ETH_SS_STATS)
-               return;
-
-       for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
-               memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string,
-                      ETH_GSTRING_LEN);
-       }
-}
-
-static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port,
-                                 uint64_t *buf)
+int ksz_port_bridge_join(struct dsa_switch *ds, int port,
+                        struct net_device *br)
 {
        struct ksz_device *dev = ds->priv;
-       int i;
-       u32 data;
-       int timeout;
 
-       mutex_lock(&dev->stats_mutex);
+       dev->br_member |= (1 << port);
 
-       for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
-               data = MIB_COUNTER_READ;
-               data |= ((mib_names[i].index & 0xFF) << MIB_COUNTER_INDEX_S);
-               ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
+       /* port_stp_state_set() will be called after to put the port in
+        * appropriate state so there is no need to do anything.
+        */
 
-               timeout = 1000;
-               do {
-                       ksz_pread32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
-                                   &data);
-                       usleep_range(1, 10);
-                       if (!(data & MIB_COUNTER_READ))
-                               break;
-               } while (timeout-- > 0);
-
-               /* failed to read MIB. get out of loop */
-               if (!timeout) {
-                       dev_dbg(dev->dev, "Failed to get MIB\n");
-                       break;
-               }
-
-               /* count resets upon read */
-               ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
-
-               dev->mib_value[i] += (uint64_t)data;
-               buf[i] = dev->mib_value[i];
-       }
-
-       mutex_unlock(&dev->stats_mutex);
+       return 0;
 }
+EXPORT_SYMBOL_GPL(ksz_port_bridge_join);
 
-static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port,
-                                      u8 state)
+void ksz_port_bridge_leave(struct dsa_switch *ds, int port,
+                          struct net_device *br)
 {
        struct ksz_device *dev = ds->priv;
-       u8 data;
 
-       ksz_pread8(dev, port, P_STP_CTRL, &data);
-       data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+       dev->br_member &= ~(1 << port);
+       dev->member &= ~(1 << port);
 
-       switch (state) {
-       case BR_STATE_DISABLED:
-               data |= PORT_LEARN_DISABLE;
-               break;
-       case BR_STATE_LISTENING:
-               data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
-               break;
-       case BR_STATE_LEARNING:
-               data |= PORT_RX_ENABLE;
-               break;
-       case BR_STATE_FORWARDING:
-               data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
-               break;
-       case BR_STATE_BLOCKING:
-               data |= PORT_LEARN_DISABLE;
-               break;
-       default:
-               dev_err(ds->dev, "invalid STP state: %d\n", state);
-               return;
-       }
-
-       ksz_pwrite8(dev, port, P_STP_CTRL, data);
+       /* port_stp_state_set() will be called after to put the port in
+        * forwarding state so there is no need to do anything.
+        */
 }
+EXPORT_SYMBOL_GPL(ksz_port_bridge_leave);
 
-static void ksz_port_fast_age(struct dsa_switch *ds, int port)
+void ksz_port_fast_age(struct dsa_switch *ds, int port)
 {
        struct ksz_device *dev = ds->priv;
-       u8 data8;
 
-       ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
-       data8 |= SW_FAST_AGING;
-       ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
-
-       data8 &= ~SW_FAST_AGING;
-       ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
+       dev->dev_ops->flush_dyn_mac_table(dev, port);
 }
+EXPORT_SYMBOL_GPL(ksz_port_fast_age);
 
-static int ksz9477_port_vlan_filtering(struct dsa_switch *ds, int port,
-                                      bool flag)
-{
-       struct ksz_device *dev = ds->priv;
-
-       if (flag) {
-               ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
-                            PORT_VLAN_LOOKUP_VID_0, true);
-               ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, true);
-               ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true);
-       } else {
-               ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false);
-               ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, false);
-               ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
-                            PORT_VLAN_LOOKUP_VID_0, false);
-       }
-
-       return 0;
-}
-
-static int ksz_port_vlan_prepare(struct dsa_switch *ds, int port,
-                                const struct switchdev_obj_port_vlan *vlan)
+int ksz_port_vlan_prepare(struct dsa_switch *ds, int port,
+                         const struct switchdev_obj_port_vlan *vlan)
 {
        /* nothing needed */
 
        return 0;
 }
+EXPORT_SYMBOL_GPL(ksz_port_vlan_prepare);
 
-static void ksz9477_port_vlan_add(struct dsa_switch *ds, int port,
-                                 const struct switchdev_obj_port_vlan *vlan)
-{
-       struct ksz_device *dev = ds->priv;
-       u32 vlan_table[3];
-       u16 vid;
-       bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
-
-       for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
-               if (get_vlan_table(ds, vid, vlan_table)) {
-                       dev_dbg(dev->dev, "Failed to get vlan table\n");
-                       return;
-               }
-
-               vlan_table[0] = VLAN_VALID | (vid & VLAN_FID_M);
-               if (untagged)
-                       vlan_table[1] |= BIT(port);
-               else
-                       vlan_table[1] &= ~BIT(port);
-               vlan_table[1] &= ~(BIT(dev->cpu_port));
-
-               vlan_table[2] |= BIT(port) | BIT(dev->cpu_port);
-
-               if (set_vlan_table(ds, vid, vlan_table)) {
-                       dev_dbg(dev->dev, "Failed to set vlan table\n");
-                       return;
-               }
-
-               /* change PVID */
-               if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
-                       ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vid);
-       }
-}
-
-static int ksz9477_port_vlan_del(struct dsa_switch *ds, int port,
-                                const struct switchdev_obj_port_vlan *vlan)
-{
-       struct ksz_device *dev = ds->priv;
-       bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
-       u32 vlan_table[3];
-       u16 vid;
-       u16 pvid;
-
-       ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid);
-       pvid = pvid & 0xFFF;
-
-       for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
-               if (get_vlan_table(ds, vid, vlan_table)) {
-                       dev_dbg(dev->dev, "Failed to get vlan table\n");
-                       return -ETIMEDOUT;
-               }
-
-               vlan_table[2] &= ~BIT(port);
-
-               if (pvid == vid)
-                       pvid = 1;
-
-               if (untagged)
-                       vlan_table[1] &= ~BIT(port);
-
-               if (set_vlan_table(ds, vid, vlan_table)) {
-                       dev_dbg(dev->dev, "Failed to set vlan table\n");
-                       return -ETIMEDOUT;
-               }
-       }
-
-       ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid);
-
-       return 0;
-}
-
-struct alu_struct {
-       /* entry 1 */
-       u8      is_static:1;
-       u8      is_src_filter:1;
-       u8      is_dst_filter:1;
-       u8      prio_age:3;
-       u32     _reserv_0_1:23;
-       u8      mstp:3;
-       /* entry 2 */
-       u8      is_override:1;
-       u8      is_use_fid:1;
-       u32     _reserv_1_1:23;
-       u8      port_forward:7;
-       /* entry 3 & 4*/
-       u32     _reserv_2_1:9;
-       u8      fid:7;
-       u8      mac[ETH_ALEN];
-};
-
-static int ksz9477_port_fdb_add(struct dsa_switch *ds, int port,
-                               const unsigned char *addr, u16 vid)
+int ksz_port_fdb_dump(struct dsa_switch *ds, int port, dsa_fdb_dump_cb_t *cb,
+                     void *data)
 {
        struct ksz_device *dev = ds->priv;
-       u32 alu_table[4];
-       u32 data;
        int ret = 0;
-
-       mutex_lock(&dev->alu_mutex);
-
-       /* find any entry with mac & vid */
-       data = vid << ALU_FID_INDEX_S;
-       data |= ((addr[0] << 8) | addr[1]);
-       ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
-
-       data = ((addr[2] << 24) | (addr[3] << 16));
-       data |= ((addr[4] << 8) | addr[5]);
-       ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
-
-       /* start read operation */
-       ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
-
-       /* wait to be finished */
-       ret = wait_alu_ready(dev, ALU_START, 1000);
-       if (ret < 0) {
-               dev_dbg(dev->dev, "Failed to read ALU\n");
-               goto exit;
-       }
-
-       /* read ALU entry */
-       read_table(ds, alu_table);
-
-       /* update ALU entry */
-       alu_table[0] = ALU_V_STATIC_VALID;
-       alu_table[1] |= BIT(port);
-       if (vid)
-               alu_table[1] |= ALU_V_USE_FID;
-       alu_table[2] = (vid << ALU_V_FID_S);
-       alu_table[2] |= ((addr[0] << 8) | addr[1]);
-       alu_table[3] = ((addr[2] << 24) | (addr[3] << 16));
-       alu_table[3] |= ((addr[4] << 8) | addr[5]);
-
-       write_table(ds, alu_table);
-
-       ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
-
-       /* wait to be finished */
-       ret = wait_alu_ready(dev, ALU_START, 1000);
-       if (ret < 0)
-               dev_dbg(dev->dev, "Failed to write ALU\n");
-
-exit:
-       mutex_unlock(&dev->alu_mutex);
-
-       return ret;
-}
-
-static int ksz9477_port_fdb_del(struct dsa_switch *ds, int port,
-                               const unsigned char *addr, u16 vid)
-{
-       struct ksz_device *dev = ds->priv;
-       u32 alu_table[4];
-       u32 data;
-       int ret = 0;
-
-       mutex_lock(&dev->alu_mutex);
-
-       /* read any entry with mac & vid */
-       data = vid << ALU_FID_INDEX_S;
-       data |= ((addr[0] << 8) | addr[1]);
-       ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
-
-       data = ((addr[2] << 24) | (addr[3] << 16));
-       data |= ((addr[4] << 8) | addr[5]);
-       ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
-
-       /* start read operation */
-       ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
-
-       /* wait to be finished */
-       ret = wait_alu_ready(dev, ALU_START, 1000);
-       if (ret < 0) {
-               dev_dbg(dev->dev, "Failed to read ALU\n");
-               goto exit;
-       }
-
-       ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]);
-       if (alu_table[0] & ALU_V_STATIC_VALID) {
-               ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]);
-               ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]);
-               ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]);
-
-               /* clear forwarding port */
-               alu_table[2] &= ~BIT(port);
-
-               /* if there is no port to forward, clear table */
-               if ((alu_table[2] & ALU_V_PORT_MAP) == 0) {
-                       alu_table[0] = 0;
-                       alu_table[1] = 0;
-                       alu_table[2] = 0;
-                       alu_table[3] = 0;
-               }
-       } else {
-               alu_table[0] = 0;
-               alu_table[1] = 0;
-               alu_table[2] = 0;
-               alu_table[3] = 0;
-       }
-
-       write_table(ds, alu_table);
-
-       ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
-
-       /* wait to be finished */
-       ret = wait_alu_ready(dev, ALU_START, 1000);
-       if (ret < 0)
-               dev_dbg(dev->dev, "Failed to write ALU\n");
-
-exit:
-       mutex_unlock(&dev->alu_mutex);
-
-       return ret;
-}
-
-static void convert_alu(struct alu_struct *alu, u32 *alu_table)
-{
-       alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID);
-       alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER);
-       alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER);
-       alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) &
-                       ALU_V_PRIO_AGE_CNT_M;
-       alu->mstp = alu_table[0] & ALU_V_MSTP_M;
-
-       alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE);
-       alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID);
-       alu->port_forward = alu_table[1] & ALU_V_PORT_MAP;
-
-       alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M;
-
-       alu->mac[0] = (alu_table[2] >> 8) & 0xFF;
-       alu->mac[1] = alu_table[2] & 0xFF;
-       alu->mac[2] = (alu_table[3] >> 24) & 0xFF;
-       alu->mac[3] = (alu_table[3] >> 16) & 0xFF;
-       alu->mac[4] = (alu_table[3] >> 8) & 0xFF;
-       alu->mac[5] = alu_table[3] & 0xFF;
-}
-
-static int ksz9477_port_fdb_dump(struct dsa_switch *ds, int port,
-                                dsa_fdb_dump_cb_t *cb, void *data)
-{
-       struct ksz_device *dev = ds->priv;
-       int ret = 0;
-       u32 ksz_data;
-       u32 alu_table[4];
+       u16 i = 0;
+       u16 entries = 0;
+       u8 timestamp = 0;
+       u8 fid;
+       u8 member;
        struct alu_struct alu;
-       int timeout;
-
-       mutex_lock(&dev->alu_mutex);
-
-       /* start ALU search */
-       ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH);
 
        do {
-               timeout = 1000;
-               do {
-                       ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data);
-                       if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START))
-                               break;
-                       usleep_range(1, 10);
-               } while (timeout-- > 0);
-
-               if (!timeout) {
-                       dev_dbg(dev->dev, "Failed to search ALU\n");
-                       ret = -ETIMEDOUT;
-                       goto exit;
-               }
-
-               /* read ALU table */
-               read_table(ds, alu_table);
-
-               convert_alu(&alu, alu_table);
-
-               if (alu.port_forward & BIT(port)) {
+               alu.is_static = false;
+               ret = dev->dev_ops->r_dyn_mac_table(dev, i, alu.mac, &fid,
+                                                   &member, &timestamp,
+                                                   &entries);
+               if (!ret && (member & BIT(port))) {
                        ret = cb(alu.mac, alu.fid, alu.is_static, data);
                        if (ret)
-                               goto exit;
+                               break;
                }
-       } while (ksz_data & ALU_START);
-
-exit:
-
-       /* stop ALU search */
-       ksz_write32(dev, REG_SW_ALU_CTRL__4, 0);
-
-       mutex_unlock(&dev->alu_mutex);
+               i++;
+       } while (i < entries);
+       if (i >= entries)
+               ret = 0;
 
        return ret;
 }
+EXPORT_SYMBOL_GPL(ksz_port_fdb_dump);
 
-static int ksz_port_mdb_prepare(struct dsa_switch *ds, int port,
-                               const struct switchdev_obj_port_mdb *mdb)
+int ksz_port_mdb_prepare(struct dsa_switch *ds, int port,
+                        const struct switchdev_obj_port_mdb *mdb)
 {
        /* nothing to do */
        return 0;
 }
+EXPORT_SYMBOL_GPL(ksz_port_mdb_prepare);
 
-static void ksz9477_port_mdb_add(struct dsa_switch *ds, int port,
-                                const struct switchdev_obj_port_mdb *mdb)
+void ksz_port_mdb_add(struct dsa_switch *ds, int port,
+                     const struct switchdev_obj_port_mdb *mdb)
 {
        struct ksz_device *dev = ds->priv;
-       u32 static_table[4];
-       u32 data;
+       struct alu_struct alu;
        int index;
-       u32 mac_hi, mac_lo;
-
-       mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
-       mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
-       mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
-
-       mutex_lock(&dev->alu_mutex);
+       int empty = 0;
 
+       alu.port_forward = 0;
        for (index = 0; index < dev->num_statics; index++) {
-               /* find empty slot first */
-               data = (index << ALU_STAT_INDEX_S) |
-                       ALU_STAT_READ | ALU_STAT_START;
-               ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
-
-               /* wait to be finished */
-               if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0) {
-                       dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
-                       goto exit;
-               }
-
-               /* read ALU static table */
-               read_table(ds, static_table);
-
-               if (static_table[0] & ALU_V_STATIC_VALID) {
-                       /* check this has same vid & mac address */
-                       if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
-                           ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
-                           static_table[3] == mac_lo) {
-                               /* found matching one */
+               if (!dev->dev_ops->r_sta_mac_table(dev, index, &alu)) {
+                       /* Found one already in static MAC table. */
+                       if (!memcmp(alu.mac, mdb->addr, ETH_ALEN) &&
+                           alu.fid == mdb->vid)
                                break;
-                       }
-               } else {
-                       /* found empty one */
-                       break;
+               /* Remember the first empty entry. */
+               } else if (!empty) {
+                       empty = index + 1;
                }
        }
 
        /* no available entry */
-       if (index == dev->num_statics)
-               goto exit;
+       if (index == dev->num_statics && !empty)
+               return;
 
        /* add entry */
-       static_table[0] = ALU_V_STATIC_VALID;
-       static_table[1] |= BIT(port);
-       if (mdb->vid)
-               static_table[1] |= ALU_V_USE_FID;
-       static_table[2] = (mdb->vid << ALU_V_FID_S);
-       static_table[2] |= mac_hi;
-       static_table[3] = mac_lo;
-
-       write_table(ds, static_table);
-
-       data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
-       ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
-
-       /* wait to be finished */
-       if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0)
-               dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+       if (index == dev->num_statics) {
+               index = empty - 1;
+               memset(&alu, 0, sizeof(alu));
+               memcpy(alu.mac, mdb->addr, ETH_ALEN);
+               alu.is_static = true;
+       }
+       alu.port_forward |= BIT(port);
+       if (mdb->vid) {
+               alu.is_use_fid = true;
 
-exit:
-       mutex_unlock(&dev->alu_mutex);
+               /* Need a way to map VID to FID. */
+               alu.fid = mdb->vid;
+       }
+       dev->dev_ops->w_sta_mac_table(dev, index, &alu);
 }
+EXPORT_SYMBOL_GPL(ksz_port_mdb_add);
 
-static int ksz9477_port_mdb_del(struct dsa_switch *ds, int port,
-                               const struct switchdev_obj_port_mdb *mdb)
+int ksz_port_mdb_del(struct dsa_switch *ds, int port,
+                    const struct switchdev_obj_port_mdb *mdb)
 {
        struct ksz_device *dev = ds->priv;
-       u32 static_table[4];
-       u32 data;
+       struct alu_struct alu;
        int index;
        int ret = 0;
-       u32 mac_hi, mac_lo;
-
-       mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
-       mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
-       mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
-
-       mutex_lock(&dev->alu_mutex);
 
        for (index = 0; index < dev->num_statics; index++) {
-               /* find empty slot first */
-               data = (index << ALU_STAT_INDEX_S) |
-                       ALU_STAT_READ | ALU_STAT_START;
-               ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
-
-               /* wait to be finished */
-               ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
-               if (ret < 0) {
-                       dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
-                       goto exit;
-               }
-
-               /* read ALU static table */
-               read_table(ds, static_table);
-
-               if (static_table[0] & ALU_V_STATIC_VALID) {
-                       /* check this has same vid & mac address */
-
-                       if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
-                           ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
-                           static_table[3] == mac_lo) {
-                               /* found matching one */
+               if (!dev->dev_ops->r_sta_mac_table(dev, index, &alu)) {
+                       /* Found one already in static MAC table. */
+                       if (!memcmp(alu.mac, mdb->addr, ETH_ALEN) &&
+                           alu.fid == mdb->vid)
                                break;
-                       }
                }
        }
 
        /* no available entry */
-       if (index == dev->num_statics) {
-               ret = -EINVAL;
+       if (index == dev->num_statics)
                goto exit;
-       }
 
        /* clear port */
-       static_table[1] &= ~BIT(port);
-
-       if ((static_table[1] & ALU_V_PORT_MAP) == 0) {
-               /* delete entry */
-               static_table[0] = 0;
-               static_table[1] = 0;
-               static_table[2] = 0;
-               static_table[3] = 0;
-       }
-
-       write_table(ds, static_table);
-
-       data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
-       ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
-
-       /* wait to be finished */
-       ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
-       if (ret < 0)
-               dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+       alu.port_forward &= ~BIT(port);
+       if (!alu.port_forward)
+               alu.is_static = false;
+       dev->dev_ops->w_sta_mac_table(dev, index, &alu);
 
 exit:
-       mutex_unlock(&dev->alu_mutex);
-
        return ret;
 }
+EXPORT_SYMBOL_GPL(ksz_port_mdb_del);
 
-static int ksz9477_port_mirror_add(struct dsa_switch *ds, int port,
-                                  struct dsa_mall_mirror_tc_entry *mirror,
-                                  bool ingress)
+int ksz_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
 {
        struct ksz_device *dev = ds->priv;
 
-       if (ingress)
-               ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
-       else
-               ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
-
-       ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
-
-       /* configure mirror port */
-       ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
-                    PORT_MIRROR_SNIFFER, true);
+       /* setup slave port */
+       dev->dev_ops->port_setup(dev, port, false);
 
-       ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+       /* port_stp_state_set() will be called after to enable the port so
+        * there is no need to do anything.
+        */
 
        return 0;
 }
+EXPORT_SYMBOL_GPL(ksz_enable_port);
 
-static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port,
-                                   struct dsa_mall_mirror_tc_entry *mirror)
+void ksz_disable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
 {
        struct ksz_device *dev = ds->priv;
-       u8 data;
-
-       if (mirror->ingress)
-               ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
-       else
-               ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
-
-       ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
-
-       if (!(data & (PORT_MIRROR_RX | PORT_MIRROR_TX)))
-               ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
-                            PORT_MIRROR_SNIFFER, false);
-}
-
-static const struct dsa_switch_ops ksz_switch_ops = {
-       .get_tag_protocol       = ksz9477_get_tag_protocol,
-       .setup                  = ksz9477_setup,
-       .phy_read               = ksz9477_phy_read16,
-       .phy_write              = ksz9477_phy_write16,
-       .port_enable            = ksz_enable_port,
-       .port_disable           = ksz_disable_port,
-       .get_strings            = ksz9477_get_strings,
-       .get_ethtool_stats      = ksz_get_ethtool_stats,
-       .get_sset_count         = ksz_sset_count,
-       .port_stp_state_set     = ksz9477_port_stp_state_set,
-       .port_fast_age          = ksz_port_fast_age,
-       .port_vlan_filtering    = ksz9477_port_vlan_filtering,
-       .port_vlan_prepare      = ksz_port_vlan_prepare,
-       .port_vlan_add          = ksz9477_port_vlan_add,
-       .port_vlan_del          = ksz9477_port_vlan_del,
-       .port_fdb_dump          = ksz9477_port_fdb_dump,
-       .port_fdb_add           = ksz9477_port_fdb_add,
-       .port_fdb_del           = ksz9477_port_fdb_del,
-       .port_mdb_prepare       = ksz_port_mdb_prepare,
-       .port_mdb_add           = ksz9477_port_mdb_add,
-       .port_mdb_del           = ksz9477_port_mdb_del,
-       .port_mirror_add        = ksz9477_port_mirror_add,
-       .port_mirror_del        = ksz9477_port_mirror_del,
-};
-
-struct ksz_chip_data {
-       u32 chip_id;
-       const char *dev_name;
-       int num_vlans;
-       int num_alus;
-       int num_statics;
-       int cpu_ports;
-       int port_cnt;
-};
-
-static const struct ksz_chip_data ksz9477_switch_chips[] = {
-       {
-               .chip_id = 0x00947700,
-               .dev_name = "KSZ9477",
-               .num_vlans = 4096,
-               .num_alus = 4096,
-               .num_statics = 16,
-               .cpu_ports = 0x7F,      /* can be configured as cpu port */
-               .port_cnt = 7,          /* total physical port count */
-       },
-       {
-               .chip_id = 0x00989700,
-               .dev_name = "KSZ9897",
-               .num_vlans = 4096,
-               .num_alus = 4096,
-               .num_statics = 16,
-               .cpu_ports = 0x7F,      /* can be configured as cpu port */
-               .port_cnt = 7,          /* total physical port count */
-       },
-};
-
-static int ksz9477_switch_init(struct ksz_device *dev)
-{
-       int i;
-
-       dev->ds->ops = &ksz_switch_ops;
-
-       for (i = 0; i < ARRAY_SIZE(ksz9477_switch_chips); i++) {
-               const struct ksz_chip_data *chip = &ksz9477_switch_chips[i];
 
-               if (dev->chip_id == chip->chip_id) {
-                       dev->name = chip->dev_name;
-                       dev->num_vlans = chip->num_vlans;
-                       dev->num_alus = chip->num_alus;
-                       dev->num_statics = chip->num_statics;
-                       dev->port_cnt = chip->port_cnt;
-                       dev->cpu_ports = chip->cpu_ports;
-
-                       break;
-               }
-       }
+       dev->on_ports &= ~(1 << port);
+       dev->live_ports &= ~(1 << port);
 
-       /* no switch found */
-       if (!dev->port_cnt)
-               return -ENODEV;
-
-       return 0;
+       /* port_stp_state_set() will be called after to disable the port so
+        * there is no need to do anything.
+        */
 }
+EXPORT_SYMBOL_GPL(ksz_disable_port);
 
 struct ksz_device *ksz_switch_alloc(struct device *base,
                                    const struct ksz_io_ops *ops,
@@ -1158,34 +286,8 @@ struct ksz_device *ksz_switch_alloc(struct device *base,
 }
 EXPORT_SYMBOL(ksz_switch_alloc);
 
-int ksz_switch_detect(struct ksz_device *dev)
-{
-       u8 data8;
-       u32 id32;
-       int ret;
-
-       /* turn off SPI DO Edge select */
-       ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
-       if (ret)
-               return ret;
-
-       data8 &= ~SPI_AUTO_EDGE_DETECTION;
-       ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
-       if (ret)
-               return ret;
-
-       /* read chip id */
-       ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32);
-       if (ret)
-               return ret;
-
-       dev->chip_id = id32;
-
-       return 0;
-}
-EXPORT_SYMBOL(ksz_switch_detect);
-
-int ksz_switch_register(struct ksz_device *dev)
+int ksz_switch_register(struct ksz_device *dev,
+                       const struct ksz_dev_ops *ops)
 {
        int ret;
 
@@ -1197,19 +299,35 @@ int ksz_switch_register(struct ksz_device *dev)
        mutex_init(&dev->alu_mutex);
        mutex_init(&dev->vlan_mutex);
 
-       if (ksz_switch_detect(dev))
+       dev->dev_ops = ops;
+
+       if (dev->dev_ops->detect(dev))
                return -EINVAL;
 
-       ret = ksz9477_switch_init(dev);
+       ret = dev->dev_ops->init(dev);
        if (ret)
                return ret;
 
-       return dsa_register_switch(dev->ds);
+       dev->interface = PHY_INTERFACE_MODE_MII;
+       if (dev->dev->of_node) {
+               ret = of_get_phy_mode(dev->dev->of_node);
+               if (ret >= 0)
+                       dev->interface = ret;
+       }
+
+       ret = dsa_register_switch(dev->ds);
+       if (ret) {
+               dev->dev_ops->exit(dev);
+               return ret;
+       }
+
+       return 0;
 }
 EXPORT_SYMBOL(ksz_switch_register);
 
 void ksz_switch_remove(struct ksz_device *dev)
 {
+       dev->dev_ops->exit(dev);
        dsa_unregister_switch(dev->ds);
 }
 EXPORT_SYMBOL(ksz_switch_remove);
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
new file mode 100644 (file)
index 0000000..2dd832d
--- /dev/null
@@ -0,0 +1,214 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Microchip switch driver common header
+ *
+ * Copyright (C) 2017-2018 Microchip Technology Inc.
+ */
+
+#ifndef __KSZ_COMMON_H
+#define __KSZ_COMMON_H
+
+void ksz_update_port_member(struct ksz_device *dev, int port);
+
+/* Common DSA access functions */
+
+int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg);
+int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val);
+int ksz_sset_count(struct dsa_switch *ds, int port, int sset);
+int ksz_port_bridge_join(struct dsa_switch *ds, int port,
+                        struct net_device *br);
+void ksz_port_bridge_leave(struct dsa_switch *ds, int port,
+                          struct net_device *br);
+void ksz_port_fast_age(struct dsa_switch *ds, int port);
+int ksz_port_vlan_prepare(struct dsa_switch *ds, int port,
+                         const struct switchdev_obj_port_vlan *vlan);
+int ksz_port_fdb_dump(struct dsa_switch *ds, int port, dsa_fdb_dump_cb_t *cb,
+                     void *data);
+int ksz_port_mdb_prepare(struct dsa_switch *ds, int port,
+                        const struct switchdev_obj_port_mdb *mdb);
+void ksz_port_mdb_add(struct dsa_switch *ds, int port,
+                     const struct switchdev_obj_port_mdb *mdb);
+int ksz_port_mdb_del(struct dsa_switch *ds, int port,
+                    const struct switchdev_obj_port_mdb *mdb);
+int ksz_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy);
+void ksz_disable_port(struct dsa_switch *ds, int port, struct phy_device *phy);
+
+/* Common register access functions */
+
+static inline int ksz_read8(struct ksz_device *dev, u32 reg, u8 *val)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->read8(dev, reg, val);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline int ksz_read16(struct ksz_device *dev, u32 reg, u16 *val)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->read16(dev, reg, val);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline int ksz_read24(struct ksz_device *dev, u32 reg, u32 *val)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->read24(dev, reg, val);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline int ksz_read32(struct ksz_device *dev, u32 reg, u32 *val)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->read32(dev, reg, val);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline int ksz_write8(struct ksz_device *dev, u32 reg, u8 value)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->write8(dev, reg, value);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline int ksz_write16(struct ksz_device *dev, u32 reg, u16 value)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->write16(dev, reg, value);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline int ksz_write24(struct ksz_device *dev, u32 reg, u32 value)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->write24(dev, reg, value);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline int ksz_write32(struct ksz_device *dev, u32 reg, u32 value)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->write32(dev, reg, value);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline int ksz_get(struct ksz_device *dev, u32 reg, void *data,
+                         size_t len)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->get(dev, reg, data, len);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline int ksz_set(struct ksz_device *dev, u32 reg, void *data,
+                         size_t len)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->set(dev, reg, data, len);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline void ksz_pread8(struct ksz_device *dev, int port, int offset,
+                             u8 *data)
+{
+       ksz_read8(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline void ksz_pread16(struct ksz_device *dev, int port, int offset,
+                              u16 *data)
+{
+       ksz_read16(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline void ksz_pread32(struct ksz_device *dev, int port, int offset,
+                              u32 *data)
+{
+       ksz_read32(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline void ksz_pwrite8(struct ksz_device *dev, int port, int offset,
+                              u8 data)
+{
+       ksz_write8(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline void ksz_pwrite16(struct ksz_device *dev, int port, int offset,
+                               u16 data)
+{
+       ksz_write16(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline void ksz_pwrite32(struct ksz_device *dev, int port, int offset,
+                               u32 data)
+{
+       ksz_write32(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
+{
+       u8 data;
+
+       ksz_read8(dev, addr, &data);
+       if (set)
+               data |= bits;
+       else
+               data &= ~bits;
+       ksz_write8(dev, addr, data);
+}
+
+static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
+                        bool set)
+{
+       u32 addr;
+       u8 data;
+
+       addr = dev->dev_ops->get_port_addr(port, offset);
+       ksz_read8(dev, addr, &data);
+
+       if (set)
+               data |= bits;
+       else
+               data &= ~bits;
+
+       ksz_write8(dev, addr, data);
+}
+
+#endif
index 6a27933..74c5c1a 100644 (file)
@@ -22,6 +22,27 @@ struct vlan_table {
        u32 table[3];
 };
 
+struct ksz_port_mib {
+       u8 cnt_ptr;
+       u64 *counters;
+};
+
+struct ksz_port {
+       u16 member;
+       u16 vid_member;
+       int stp_state;
+       struct phy_device phydev;
+
+       u32 on:1;                       /* port is not disabled by hardware */
+       u32 phy:1;                      /* port has a PHY */
+       u32 fiber:1;                    /* port is fiber */
+       u32 sgmii:1;                    /* port is SGMII */
+       u32 force:1;
+       u32 link_just_down:1;           /* link just goes down */
+
+       struct ksz_port_mib mib;
+};
+
 struct ksz_device {
        struct dsa_switch *ds;
        struct ksz_platform_data *pdata;
@@ -32,6 +53,7 @@ struct ksz_device {
        struct mutex alu_mutex;         /* ALU access */
        struct mutex vlan_mutex;        /* vlan access */
        const struct ksz_io_ops *ops;
+       const struct ksz_dev_ops *dev_ops;
 
        struct device *dev;
 
@@ -44,11 +66,37 @@ struct ksz_device {
        int num_statics;
        int cpu_port;                   /* port connected to CPU */
        int cpu_ports;                  /* port bitmap can be cpu port */
+       int phy_port_cnt;
        int port_cnt;
+       int reg_mib_cnt;
+       int mib_cnt;
+       int mib_port_cnt;
+       int last_port;                  /* ports after that not used */
+       phy_interface_t interface;
+       u32 regs_size;
 
        struct vlan_table *vlan_cache;
 
        u64 mib_value[TOTAL_SWITCH_COUNTER_NUM];
+
+       u8 *txbuf;
+
+       struct ksz_port *ports;
+       struct timer_list mib_read_timer;
+       struct work_struct mib_read;
+       unsigned long mib_read_interval;
+       u16 br_member;
+       u16 member;
+       u16 live_ports;
+       u16 on_ports;                   /* ports enabled by DSA */
+       u16 rx_ports;
+       u16 tx_ports;
+       u16 mirror_rx;
+       u16 mirror_tx;
+       u32 features;                   /* chip specific features */
+       u32 overrides;                  /* chip functions set by user */
+       u16 host_mask;
+       u16 port_mask;
 };
 
 struct ksz_io_ops {
@@ -60,140 +108,60 @@ struct ksz_io_ops {
        int (*write16)(struct ksz_device *dev, u32 reg, u16 value);
        int (*write24)(struct ksz_device *dev, u32 reg, u32 value);
        int (*write32)(struct ksz_device *dev, u32 reg, u32 value);
-       int (*phy_read16)(struct ksz_device *dev, int addr, int reg,
-                         u16 *value);
-       int (*phy_write16)(struct ksz_device *dev, int addr, int reg,
-                          u16 value);
+       int (*get)(struct ksz_device *dev, u32 reg, void *data, size_t len);
+       int (*set)(struct ksz_device *dev, u32 reg, void *data, size_t len);
+};
+
+struct alu_struct {
+       /* entry 1 */
+       u8      is_static:1;
+       u8      is_src_filter:1;
+       u8      is_dst_filter:1;
+       u8      prio_age:3;
+       u32     _reserv_0_1:23;
+       u8      mstp:3;
+       /* entry 2 */
+       u8      is_override:1;
+       u8      is_use_fid:1;
+       u32     _reserv_1_1:23;
+       u8      port_forward:7;
+       /* entry 3 & 4*/
+       u32     _reserv_2_1:9;
+       u8      fid:7;
+       u8      mac[ETH_ALEN];
+};
+
+struct ksz_dev_ops {
+       u32 (*get_port_addr)(int port, int offset);
+       void (*cfg_port_member)(struct ksz_device *dev, int port, u8 member);
+       void (*flush_dyn_mac_table)(struct ksz_device *dev, int port);
+       void (*port_setup)(struct ksz_device *dev, int port, bool cpu_port);
+       void (*r_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 *val);
+       void (*w_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 val);
+       int (*r_dyn_mac_table)(struct ksz_device *dev, u16 addr, u8 *mac_addr,
+                              u8 *fid, u8 *src_port, u8 *timestamp,
+                              u16 *entries);
+       int (*r_sta_mac_table)(struct ksz_device *dev, u16 addr,
+                              struct alu_struct *alu);
+       void (*w_sta_mac_table)(struct ksz_device *dev, u16 addr,
+                               struct alu_struct *alu);
+       void (*r_mib_cnt)(struct ksz_device *dev, int port, u16 addr,
+                         u64 *cnt);
+       void (*r_mib_pkt)(struct ksz_device *dev, int port, u16 addr,
+                         u64 *dropped, u64 *cnt);
+       void (*port_init_cnt)(struct ksz_device *dev, int port);
+       int (*shutdown)(struct ksz_device *dev);
+       int (*detect)(struct ksz_device *dev);
+       int (*init)(struct ksz_device *dev);
+       void (*exit)(struct ksz_device *dev);
 };
 
 struct ksz_device *ksz_switch_alloc(struct device *base,
                                    const struct ksz_io_ops *ops, void *priv);
-int ksz_switch_detect(struct ksz_device *dev);
-int ksz_switch_register(struct ksz_device *dev);
+int ksz_switch_register(struct ksz_device *dev,
+                       const struct ksz_dev_ops *ops);
 void ksz_switch_remove(struct ksz_device *dev);
 
-static inline int ksz_read8(struct ksz_device *dev, u32 reg, u8 *val)
-{
-       int ret;
-
-       mutex_lock(&dev->reg_mutex);
-       ret = dev->ops->read8(dev, reg, val);
-       mutex_unlock(&dev->reg_mutex);
-
-       return ret;
-}
-
-static inline int ksz_read16(struct ksz_device *dev, u32 reg, u16 *val)
-{
-       int ret;
-
-       mutex_lock(&dev->reg_mutex);
-       ret = dev->ops->read16(dev, reg, val);
-       mutex_unlock(&dev->reg_mutex);
-
-       return ret;
-}
-
-static inline int ksz_read24(struct ksz_device *dev, u32 reg, u32 *val)
-{
-       int ret;
-
-       mutex_lock(&dev->reg_mutex);
-       ret = dev->ops->read24(dev, reg, val);
-       mutex_unlock(&dev->reg_mutex);
-
-       return ret;
-}
-
-static inline int ksz_read32(struct ksz_device *dev, u32 reg, u32 *val)
-{
-       int ret;
-
-       mutex_lock(&dev->reg_mutex);
-       ret = dev->ops->read32(dev, reg, val);
-       mutex_unlock(&dev->reg_mutex);
-
-       return ret;
-}
-
-static inline int ksz_write8(struct ksz_device *dev, u32 reg, u8 value)
-{
-       int ret;
-
-       mutex_lock(&dev->reg_mutex);
-       ret = dev->ops->write8(dev, reg, value);
-       mutex_unlock(&dev->reg_mutex);
-
-       return ret;
-}
-
-static inline int ksz_write16(struct ksz_device *dev, u32 reg, u16 value)
-{
-       int ret;
-
-       mutex_lock(&dev->reg_mutex);
-       ret = dev->ops->write16(dev, reg, value);
-       mutex_unlock(&dev->reg_mutex);
-
-       return ret;
-}
-
-static inline int ksz_write24(struct ksz_device *dev, u32 reg, u32 value)
-{
-       int ret;
-
-       mutex_lock(&dev->reg_mutex);
-       ret = dev->ops->write24(dev, reg, value);
-       mutex_unlock(&dev->reg_mutex);
-
-       return ret;
-}
-
-static inline int ksz_write32(struct ksz_device *dev, u32 reg, u32 value)
-{
-       int ret;
-
-       mutex_lock(&dev->reg_mutex);
-       ret = dev->ops->write32(dev, reg, value);
-       mutex_unlock(&dev->reg_mutex);
-
-       return ret;
-}
-
-static inline void ksz_pread8(struct ksz_device *dev, int port, int offset,
-                             u8 *data)
-{
-       ksz_read8(dev, PORT_CTRL_ADDR(port, offset), data);
-}
-
-static inline void ksz_pread16(struct ksz_device *dev, int port, int offset,
-                              u16 *data)
-{
-       ksz_read16(dev, PORT_CTRL_ADDR(port, offset), data);
-}
-
-static inline void ksz_pread32(struct ksz_device *dev, int port, int offset,
-                              u32 *data)
-{
-       ksz_read32(dev, PORT_CTRL_ADDR(port, offset), data);
-}
-
-static inline void ksz_pwrite8(struct ksz_device *dev, int port, int offset,
-                              u8 data)
-{
-       ksz_write8(dev, PORT_CTRL_ADDR(port, offset), data);
-}
-
-static inline void ksz_pwrite16(struct ksz_device *dev, int port, int offset,
-                               u16 data)
-{
-       ksz_write16(dev, PORT_CTRL_ADDR(port, offset), data);
-}
-
-static inline void ksz_pwrite32(struct ksz_device *dev, int port, int offset,
-                               u32 data)
-{
-       ksz_write32(dev, PORT_CTRL_ADDR(port, offset), data);
-}
+int ksz9477_switch_register(struct ksz_device *dev);
 
 #endif
diff --git a/drivers/net/dsa/microchip/ksz_spi.h b/drivers/net/dsa/microchip/ksz_spi.h
new file mode 100644 (file)
index 0000000..427811b
--- /dev/null
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Microchip KSZ series SPI access common header
+ *
+ * Copyright (C) 2017-2018 Microchip Technology Inc.
+ *     Tristram Ha <Tristram.Ha@microchip.com>
+ */
+
+#ifndef __KSZ_SPI_H
+#define __KSZ_SPI_H
+
+/* Chip dependent SPI access */
+static int ksz_spi_read(struct ksz_device *dev, u32 reg, u8 *data,
+                       unsigned int len);
+static int ksz_spi_write(struct ksz_device *dev, u32 reg, void *data,
+                        unsigned int len);
+
+static int ksz_spi_read8(struct ksz_device *dev, u32 reg, u8 *val)
+{
+       return ksz_spi_read(dev, reg, val, 1);
+}
+
+static int ksz_spi_read16(struct ksz_device *dev, u32 reg, u16 *val)
+{
+       int ret = ksz_spi_read(dev, reg, (u8 *)val, 2);
+
+       if (!ret)
+               *val = be16_to_cpu(*val);
+
+       return ret;
+}
+
+static int ksz_spi_read32(struct ksz_device *dev, u32 reg, u32 *val)
+{
+       int ret = ksz_spi_read(dev, reg, (u8 *)val, 4);
+
+       if (!ret)
+               *val = be32_to_cpu(*val);
+
+       return ret;
+}
+
+static int ksz_spi_write8(struct ksz_device *dev, u32 reg, u8 value)
+{
+       return ksz_spi_write(dev, reg, &value, 1);
+}
+
+static int ksz_spi_write16(struct ksz_device *dev, u32 reg, u16 value)
+{
+       value = cpu_to_be16(value);
+       return ksz_spi_write(dev, reg, &value, 2);
+}
+
+static int ksz_spi_write32(struct ksz_device *dev, u32 reg, u32 value)
+{
+       value = cpu_to_be32(value);
+       return ksz_spi_write(dev, reg, &value, 4);
+}
+
+static int ksz_spi_get(struct ksz_device *dev, u32 reg, void *data, size_t len)
+{
+       return ksz_spi_read(dev, reg, data, len);
+}
+
+static int ksz_spi_set(struct ksz_device *dev, u32 reg, void *data, size_t len)
+{
+       return ksz_spi_write(dev, reg, data, len);
+}
+
+#endif