ARM: dts: imx7-colibri: use NAND_CE1 as GPIO

All Colibri iMX7 SKUs use either single-die NAND or eMMC, hence
NAND_CE1 is not used on the module and can be used as a GPIO by
carrier boards.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index e4e32aa..f61041a 100644 (file)
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -329,6 +329,7 @@
                        MX7D_PAD_EPDC_SDCE2__GPIO2_IO22         0x14 /* SODIMM 127 */
                        MX7D_PAD_UART3_RTS_B__GPIO4_IO6         0x14 /* SODIMM 131 */
                        MX7D_PAD_EPDC_GDRL__GPIO2_IO26          0x14 /* SODIMM 133 */
+                       MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12       0x14 /* SODIMM 169 */
                        MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17       0x14 /* SODIMM 24 */
                        MX7D_PAD_SD2_DATA2__GPIO5_IO16          0x14 /* SODIMM 100 */
                        MX7D_PAD_SD2_DATA3__GPIO5_IO17          0x14 /* SODIMM 102 */
@@ -439,7 +440,6 @@
                        MX7D_PAD_SD3_CLK__NAND_CLE              0x71
                        MX7D_PAD_SD3_CMD__NAND_ALE              0x71
                        MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B       0x71
-                       MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B       0x71
                        MX7D_PAD_SAI1_TX_DATA__NAND_READY_B     0x74
                        MX7D_PAD_SD3_STROBE__NAND_RE_B          0x71
                        MX7D_PAD_SD3_RESET_B__NAND_WE_B         0x71