ARM: dts: sun8i: Enable USB host controllers on Orangepi Plus boards

Enable the 2 USB host controllers used on the Orange Pi Plus
and add the necessary regulators.

Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jens Kuske <jenskuske@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index 79f40c3..64aa8ad 100644 (file)
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -90,6 +90,35 @@
                        gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
                };
        };
+
+       reg_usb3_vbus: usb3-vbus {
+               compatible = "regulator-fixed";
+               pinctrl-names = "default";
+               pinctrl-0 = <&usb3_vbus_pin_a>;
+               regulator-name = "usb3-vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               regulator-boot-on;
+               enable-active-high;
+               gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+       };
+};
+
+&ehci1 {
+       status = "okay";
+};
+
+&ehci3 {
+       status = "okay";
+};
+
+&pio {
+       usb3_vbus_pin_a: usb3_vbus_pin@0 {
+               allwinner,pins = "PG11";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
 };
 
 &pio {
@@ -127,8 +156,23 @@
        status = "okay";
 };
 
+&reg_usb1_vbus {
+       gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+};
+
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pins_a>;
        status = "okay";
 };
+
+&usb1_vbus_pin_a {
+       allwinner,pins = "PG13";
+};
+
+&usbphy {
+       usb1_vbus-supply = <&reg_usb1_vbus>;
+       usb3_vbus-supply = <&reg_usb3_vbus>;
+       status = "okay";
+};