[common][humanactivitymonitor][TEIGHT-5357 update TC steps for head emulator32]

Change-Id: I89c10385897838d2c9d139d9acca8f8cfbfdb804
Signed-off-by: chen <chen89.chen@samsung.com>

diff --git a/common/tct-humanactivitymonitor-tizen-tests/tests.full.xml b/common/tct-humanactivitymonitor-tizen-tests/tests.full.xml
index be1edc57048ca6ef5a717e14c3223a7adc2a9f18..ab049b27b0e0bac1d586f148842f1d9fc778e8b5 100755 (executable)
--- a/common/tct-humanactivitymonitor-tizen-tests/tests.full.xml
+++ b/common/tct-humanactivitymonitor-tizen-tests/tests.full.xml
@@ -5318,8 +5318,20 @@
         <description>
           <steps>
             <step order="1">
+              <step_desc>Check pedometer state in control panel.</step_desc>
+              <expected>Pedometer state is 'Stop'.</expected>
+            </step>
+            <step order="2">
               <step_desc>Press run button. Pretend walking with the device.</step_desc>
-              <expected>Pass</expected>
+              <expected>Test start.</expected>
+            </step>
+            <step order="3">
+              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
+              <expected>Pedometer state is 'Walk'.</expected>
+            </step>
+            <step order="4">
+              <step_desc>Waiting for 1 minutes.</step_desc>
+              <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
           <test_script_entry>/opt/tct-humanactivitymonitor-tizen-tests/humanactivitymonitor/HumanActivityMonitorManager_readRecorderData_type_PEDOMETER.html</test_script_entry>
@@ -5391,8 +5403,20 @@
         <description>
           <steps>
             <step order="1">
+              <step_desc>Check pedometer state in control panel.</step_desc>
+              <expected>Pedometer state is 'Stop'.</expected>
+            </step>
+            <step order="2">
               <step_desc>Press run button. Pretend walking with the device.</step_desc>
-              <expected>Pass</expected>
+              <expected>Test start.</expected>
+            </step>
+            <step order="3">
+              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
+              <expected>Pedometer state is 'Walk'.</expected>
+            </step>
+            <step order="4">
+              <step_desc>Waiting for 1 minutes.</step_desc>
+              <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
           <test_script_entry>/opt/tct-humanactivitymonitor-tizen-tests/humanactivitymonitor/HumanActivityRecorderPedometerData_calorie_attribute.html</test_script_entry>
@@ -5409,8 +5433,20 @@
         <description>
           <steps>
             <step order="1">
+              <step_desc>Check pedometer state in control panel.</step_desc>
+              <expected>Pedometer state is 'Stop'.</expected>
+            </step>
+            <step order="2">
               <step_desc>Press run button. Pretend walking with the device.</step_desc>
-              <expected>Pass</expected>
+              <expected>Test start.</expected>
+            </step>
+            <step order="3">
+              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
+              <expected>Pedometer state is 'Walk'.</expected>
+            </step>
+            <step order="4">
+              <step_desc>Waiting for 1 minutes.</step_desc>
+              <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
           <test_script_entry>/opt/tct-humanactivitymonitor-tizen-tests/humanactivitymonitor/HumanActivityRecorderPedometerData_distance_attribute.html</test_script_entry>
@@ -5427,8 +5463,20 @@
         <description>
           <steps>
             <step order="1">
+              <step_desc>Check pedometer state in control panel.</step_desc>
+              <expected>Pedometer state is 'Stop'.</expected>
+            </step>
+            <step order="2">
               <step_desc>Press run button. Pretend walking with the device.</step_desc>
-              <expected>Pass</expected>
+              <expected>Test start.</expected>
+            </step>
+            <step order="3">
+              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
+              <expected>Pedometer state is 'Walk'.</expected>
+            </step>
+            <step order="4">
+              <step_desc>Waiting for 1 minutes.</step_desc>
+              <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
           <test_script_entry>/opt/tct-humanactivitymonitor-tizen-tests/humanactivitymonitor/HumanActivityRecorderPedometerData_endTime_attribute.html</test_script_entry>
@@ -5457,8 +5505,20 @@
         <description>
           <steps>
             <step order="1">
+              <step_desc>Check pedometer state in control panel.</step_desc>
+              <expected>Pedometer state is 'Stop'.</expected>
+            </step>
+            <step order="2">
               <step_desc>Press run button. Pretend walking with the device.</step_desc>
-              <expected>Pass</expected>
+              <expected>Test start.</expected>
+            </step>
+            <step order="3">
+              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
+              <expected>Pedometer state is 'Walk'.</expected>
+            </step>
+            <step order="4">
+              <step_desc>Waiting for 1 minutes.</step_desc>
+              <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
           <test_script_entry>/opt/tct-humanactivitymonitor-tizen-tests/humanactivitymonitor/HumanActivityRecorderPedometerData_runStepCount_attribute.html</test_script_entry>
@@ -5475,8 +5535,20 @@
         <description>
           <steps>
             <step order="1">
+              <step_desc>Check pedometer state in control panel.</step_desc>
+              <expected>Pedometer state is 'Stop'.</expected>
+            </step>
+            <step order="2">
               <step_desc>Press run button. Pretend walking with the device.</step_desc>
-              <expected>Pass</expected>
+              <expected>Test start.</expected>
+            </step>
+            <step order="3">
+              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
+              <expected>Pedometer state is 'Walk'.</expected>
+            </step>
+            <step order="4">
+              <step_desc>Waiting for 1 minutes.</step_desc>
+              <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
           <test_script_entry>/opt/tct-humanactivitymonitor-tizen-tests/humanactivitymonitor/HumanActivityRecorderPedometerData_startTime_attribute.html</test_script_entry>
@@ -5493,8 +5565,20 @@
         <description>
           <steps>
             <step order="1">
+              <step_desc>Check pedometer state in control panel.</step_desc>
+              <expected>Pedometer state is 'Stop'.</expected>
+            </step>
+            <step order="2">
               <step_desc>Press run button. Pretend walking with the device.</step_desc>
-              <expected>Pass</expected>
+              <expected>Test start.</expected>
+            </step>
+            <step order="3">
+              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
+              <expected>Pedometer state is 'Walk'.</expected>
+            </step>
+            <step order="4">
+              <step_desc>Waiting for 1 minutes.</step_desc>
+              <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
           <test_script_entry>/opt/tct-humanactivitymonitor-tizen-tests/humanactivitymonitor/HumanActivityRecorderPedometerData_totalStepCount_attribute.html</test_script_entry>
@@ -5511,8 +5595,20 @@
         <description>
           <steps>
             <step order="1">
+              <step_desc>Check pedometer state in control panel.</step_desc>
+              <expected>Pedometer state is 'Stop'.</expected>
+            </step>
+            <step order="2">
               <step_desc>Press run button. Pretend walking with the device.</step_desc>
-              <expected>Pass</expected>
+              <expected>Test start.</expected>
+            </step>
+            <step order="3">
+              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
+              <expected>Pedometer state is 'Walk'.</expected>
+            </step>
+            <step order="4">
+              <step_desc>Waiting for 1 minutes.</step_desc>
+              <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
           <test_script_entry>/opt/tct-humanactivitymonitor-tizen-tests/humanactivitymonitor/HumanActivityRecorderPedometerData_walkStepCount_attribute.html</test_script_entry>

diff --git a/common/tct-humanactivitymonitor-tizen-tests/tests.xml b/common/tct-humanactivitymonitor-tizen-tests/tests.xml
index d31bd0f7ac5e7da5aaa8cc0d9034425a744372a6..25112dd90857069aa1f42dd772cdf730a7681961 100755 (executable)
--- a/common/tct-humanactivitymonitor-tizen-tests/tests.xml
+++ b/common/tct-humanactivitymonitor-tizen-tests/tests.xml
@@ -2772,8 +2772,20 @@
         <description>
           <steps>
             <step order="1">
+              <step_desc>Check pedometer state in control panel.</step_desc>
+              <expected>Pedometer state is 'Stop'.</expected>
+            </step>
+            <step order="2">
               <step_desc>Press run button. Pretend walking with the device.</step_desc>
-              <expected>Pass</expected>
+              <expected>Test start.</expected>
+            </step>
+            <step order="3">
+              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
+              <expected>Pedometer state is 'Walk'.</expected>
+            </step>
+            <step order="4">
+              <step_desc>Waiting for 1 minutes.</step_desc>
+              <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
           <test_script_entry>/opt/tct-humanactivitymonitor-tizen-tests/humanactivitymonitor/HumanActivityMonitorManager_readRecorderData_type_PEDOMETER.html</test_script_entry>
@@ -2810,8 +2822,20 @@
         <description>
           <steps>
             <step order="1">
+              <step_desc>Check pedometer state in control panel.</step_desc>
+              <expected>Pedometer state is 'Stop'.</expected>
+            </step>
+            <step order="2">
               <step_desc>Press run button. Pretend walking with the device.</step_desc>
-              <expected>Pass</expected>
+              <expected>Test start.</expected>
+            </step>
+            <step order="3">
+              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
+              <expected>Pedometer state is 'Walk'.</expected>
+            </step>
+            <step order="4">
+              <step_desc>Waiting for 1 minutes.</step_desc>
+              <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
           <test_script_entry>/opt/tct-humanactivitymonitor-tizen-tests/humanactivitymonitor/HumanActivityRecorderPedometerData_calorie_attribute.html</test_script_entry>
@@ -2821,8 +2845,20 @@
         <description>
           <steps>
             <step order="1">
+              <step_desc>Check pedometer state in control panel.</step_desc>
+              <expected>Pedometer state is 'Stop'.</expected>
+            </step>
+            <step order="2">
               <step_desc>Press run button. Pretend walking with the device.</step_desc>
-              <expected>Pass</expected>
+              <expected>Test start.</expected>
+            </step>
+            <step order="3">
+              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
+              <expected>Pedometer state is 'Walk'.</expected>
+            </step>
+            <step order="4">
+              <step_desc>Waiting for 1 minutes.</step_desc>
+              <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
           <test_script_entry>/opt/tct-humanactivitymonitor-tizen-tests/humanactivitymonitor/HumanActivityRecorderPedometerData_distance_attribute.html</test_script_entry>
@@ -2832,8 +2868,20 @@
         <description>
           <steps>
             <step order="1">
+              <step_desc>Check pedometer state in control panel.</step_desc>
+              <expected>Pedometer state is 'Stop'.</expected>
+            </step>
+            <step order="2">
               <step_desc>Press run button. Pretend walking with the device.</step_desc>
-              <expected>Pass</expected>
+              <expected>Test start.</expected>
+            </step>
+            <step order="3">
+              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
+              <expected>Pedometer state is 'Walk'.</expected>
+            </step>
+            <step order="4">
+              <step_desc>Waiting for 1 minutes.</step_desc>
+              <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
           <test_script_entry>/opt/tct-humanactivitymonitor-tizen-tests/humanactivitymonitor/HumanActivityRecorderPedometerData_endTime_attribute.html</test_script_entry>
@@ -2848,8 +2896,20 @@
         <description>
           <steps>
             <step order="1">
+              <step_desc>Check pedometer state in control panel.</step_desc>
+              <expected>Pedometer state is 'Stop'.</expected>
+            </step>
+            <step order="2">
               <step_desc>Press run button. Pretend walking with the device.</step_desc>
-              <expected>Pass</expected>
+              <expected>Test start.</expected>
+            </step>
+            <step order="3">
+              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
+              <expected>Pedometer state is 'Walk'.</expected>
+            </step>
+            <step order="4">
+              <step_desc>Waiting for 1 minutes.</step_desc>
+              <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
           <test_script_entry>/opt/tct-humanactivitymonitor-tizen-tests/humanactivitymonitor/HumanActivityRecorderPedometerData_runStepCount_attribute.html</test_script_entry>
@@ -2859,8 +2919,20 @@
         <description>
           <steps>
             <step order="1">
+              <step_desc>Check pedometer state in control panel.</step_desc>
+              <expected>Pedometer state is 'Stop'.</expected>
+            </step>
+            <step order="2">
               <step_desc>Press run button. Pretend walking with the device.</step_desc>
-              <expected>Pass</expected>
+              <expected>Test start.</expected>
+            </step>
+            <step order="3">
+              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
+              <expected>Pedometer state is 'Walk'.</expected>
+            </step>
+            <step order="4">
+              <step_desc>Waiting for 1 minutes.</step_desc>
+              <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
           <test_script_entry>/opt/tct-humanactivitymonitor-tizen-tests/humanactivitymonitor/HumanActivityRecorderPedometerData_startTime_attribute.html</test_script_entry>
@@ -2870,8 +2942,20 @@
         <description>
           <steps>
             <step order="1">
+              <step_desc>Check pedometer state in control panel.</step_desc>
+              <expected>Pedometer state is 'Stop'.</expected>
+            </step>
+            <step order="2">
               <step_desc>Press run button. Pretend walking with the device.</step_desc>
-              <expected>Pass</expected>
+              <expected>Test start.</expected>
+            </step>
+            <step order="3">
+              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
+              <expected>Pedometer state is 'Walk'.</expected>
+            </step>
+            <step order="4">
+              <step_desc>Waiting for 1 minutes.</step_desc>
+              <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
           <test_script_entry>/opt/tct-humanactivitymonitor-tizen-tests/humanactivitymonitor/HumanActivityRecorderPedometerData_totalStepCount_attribute.html</test_script_entry>
@@ -2881,8 +2965,20 @@
         <description>
           <steps>
             <step order="1">
+              <step_desc>Check pedometer state in control panel.</step_desc>
+              <expected>Pedometer state is 'Stop'.</expected>
+            </step>
+            <step order="2">
               <step_desc>Press run button. Pretend walking with the device.</step_desc>
-              <expected>Pass</expected>
+              <expected>Test start.</expected>
+            </step>
+            <step order="3">
+              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
+              <expected>Pedometer state is 'Walk'.</expected>
+            </step>
+            <step order="4">
+              <step_desc>Waiting for 1 minutes.</step_desc>
+              <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
           <test_script_entry>/opt/tct-humanactivitymonitor-tizen-tests/humanactivitymonitor/HumanActivityRecorderPedometerData_walkStepCount_attribute.html</test_script_entry>