Configures the peak current by monitoring the current through the boost FET.
Range starts at 1600 mA and goes to a maximum of 4500 mA with increments
of 50 mA. See section 4.3.6 of the datasheet for details.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 1600
maximum: 4500
default: 4500
description:
Boost inductor value, expressed in nH. Valid
values include 1000, 1200, 1500 and 2200.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 1000
maximum: 2200
Total equivalent boost capacitance on the VBST
and VAMP pins, derated at 11 volts DC. The value must be rounded to the
nearest integer and expressed in uF.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
cirrus,asp-sdout-hiz:
description:
1 = Hi-Z during unused slots but logic 0 while all transmit channels disabled
2 = (Default) Logic 0 during unused slots, but Hi-Z while all transmit channels disabled
3 = Hi-Z during unused slots and while all transmit channels disabled
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3
default: 2
enable boost voltage.
0 = Internal Boost
1 = External Boost
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1
1 = GPIO
2 = Sync
3 = MCLK input
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3
3 = MCLK input
4 = Push-pull INTB (active low)
5 = Push-pull INT (active high)
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 5
examples:
- |
+ #include <dt-bindings/gpio/gpio.h>
+
spi {
#address-cells = <1>;
#size-cells = <0>;
- cs35l41: cs35l41@2 {
- #sound-dai-cells = <1>;
- compatible = "cirrus,cs35l41";
- reg = <2>;
- VA-supply = <&dummy_vreg>;
- VP-supply = <&dummy_vreg>;
- reset-gpios = <&gpio 110 0>;
-
- cirrus,boost-type = <0>;
- cirrus,boost-peak-milliamp = <4500>;
- cirrus,boost-ind-nanohenry = <1000>;
- cirrus,boost-cap-microfarad = <15>;
+ cs35l41: speaker-amp@2 {
+ #sound-dai-cells = <1>;
+ compatible = "cirrus,cs35l41";
+ reg = <2>;
+ VA-supply = <&dummy_vreg>;
+ VP-supply = <&dummy_vreg>;
+ reset-gpios = <&gpio 110 GPIO_ACTIVE_HIGH>;
+
+ cirrus,boost-type = <0>;
+ cirrus,boost-peak-milliamp = <4500>;
+ cirrus,boost-ind-nanohenry = <1000>;
+ cirrus,boost-cap-microfarad = <15>;
};
};