scsi: lpfc: Rework misleading nvme not supported in firmware message

The driver unconditionally says fw doesn't support nvme when in
truth it was a driver parameter settings that disabled nvme support.

Rework the code validating nvme support to accurately report what
condition is disabling nvme support. Save state on whether nvme
fw supports nvme in case sysfs attributes change dynamically.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 70afa58..1468a4d 100644 (file)
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -11333,24 +11333,43 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
                                           mbx_sli4_parameters);
        phba->sli4_hba.extents_in_use = bf_get(cfg_ext, mbx_sli4_parameters);
        phba->sli4_hba.rpi_hdrs_in_use = bf_get(cfg_hdrr, mbx_sli4_parameters);
-       phba->nvme_support = (bf_get(cfg_nvme, mbx_sli4_parameters) &&
-                             bf_get(cfg_xib, mbx_sli4_parameters));
-
-       if ((phba->cfg_enable_fc4_type == LPFC_ENABLE_FCP) ||
-           !phba->nvme_support) {
-               phba->nvme_support = 0;
-               phba->nvmet_support = 0;
-               phba->cfg_nvmet_mrq = 0;
-               lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_NVME,
-                               "6101 Disabling NVME support: "
-                               "Not supported by firmware: %d %d\n",
-                               bf_get(cfg_nvme, mbx_sli4_parameters),
-                               bf_get(cfg_xib, mbx_sli4_parameters));
-
-               /* If firmware doesn't support NVME, just use SCSI support */
-               if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP))
-                       return -ENODEV;
-               phba->cfg_enable_fc4_type = LPFC_ENABLE_FCP;
+
+       /* Check for firmware nvme support */
+       rc = (bf_get(cfg_nvme, mbx_sli4_parameters) &&
+                    bf_get(cfg_xib, mbx_sli4_parameters));
+
+       if (rc) {
+               /* Save this to indicate the Firmware supports NVME */
+               sli4_params->nvme = 1;
+
+               /* Firmware NVME support, check driver FC4 NVME support */
+               if (phba->cfg_enable_fc4_type == LPFC_ENABLE_FCP) {
+                       lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_NVME,
+                                       "6133 Disabling NVME support: "
+                                       "FC4 type not supported: x%x\n",
+                                       phba->cfg_enable_fc4_type);
+                       goto fcponly;
+               }
+       } else {
+               /* No firmware NVME support, check driver FC4 NVME support */
+               sli4_params->nvme = 0;
+               if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
+                       lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_NVME,
+                                       "6101 Disabling NVME support: Not "
+                                       "supported by firmware (%d %d) x%x\n",
+                                       bf_get(cfg_nvme, mbx_sli4_parameters),
+                                       bf_get(cfg_xib, mbx_sli4_parameters),
+                                       phba->cfg_enable_fc4_type);
+fcponly:
+                       phba->nvme_support = 0;
+                       phba->nvmet_support = 0;
+                       phba->cfg_nvmet_mrq = 0;
+
+                       /* If no FC4 type support, move to just SCSI support */
+                       if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP))
+                               return -ENODEV;
+                       phba->cfg_enable_fc4_type = LPFC_ENABLE_FCP;
+               }
        }
 
        /* Only embed PBDE for if_type 6, PBDE support requires xib be set */

diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 12ffe57..8b28a55 100644 (file)
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -514,6 +514,7 @@ struct lpfc_pc_sli4_params {
 #define LPFC_WQ_SZ64_SUPPORT   1
 #define LPFC_WQ_SZ128_SUPPORT  2
        uint8_t wqpcnt;
+       uint8_t nvme;
 };
 
 #define LPFC_CQ_4K_PAGE_SZ     0x1