* {all,h8}-config.texi: Rename to *-cfg.texi for 14 char filenames.

	* Makefile.in: Change accordingly.  gdb-config.texi -> gdb-cfg.texi.

diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog
index 82c4cb2..4f50cf2 100644 (file)
--- a/gdb/doc/ChangeLog
+++ b/gdb/doc/ChangeLog
@@ -1,5 +1,8 @@
 Sat Jun 12 16:09:22 1993  Jim Kingdon  (kingdon@cygnus.com)
 
+       * {all,h8}-config.texi: Rename to *-cfg.texi for 14 char filenames.
+       * Makefile.in: Change accordingly.  gdb-config.texi -> gdb-cfg.texi.
+
        * stabs.texinfo: Clean up N_{L,R}BRAC.  Discuss what addresses of
        N_{L,R}BRAC,N_SLINE are relative to.
 

diff --git a/gdb/doc/Makefile.in b/gdb/doc/Makefile.in
index acf29d5..0f4c78a 100644 (file)
--- a/gdb/doc/Makefile.in
+++ b/gdb/doc/Makefile.in
@@ -56,7 +56,7 @@ TEX = tex
 TEXINDEX = texindex
 
 # Main GDB manual's source files
-SFILES_INCLUDED = gdb-config.texi $(srcdir)/gdbinv-s.texi
+SFILES_INCLUDED = gdb-cfg.texi $(srcdir)/gdbinv-s.texi
 
 SFILES_LOCAL = $(srcdir)/gdb.texinfo GDBvn.texi $(SFILES_INCLUDED)
 
@@ -164,10 +164,10 @@ GDBvn.texi : ${gdbdir}/Makefile.in
 # `configure' script because most users prefer generic version of manual,
 # not one for their binary config---which may not be specifically
 # defined anyways).
-gdb-config.texi: ${srcdir}/${DOC_CONFIG}-config.texi
-       ln -s ${srcdir}/${DOC_CONFIG}-config.texi gdb-config.texi || \
-       ln ${srcdir}/${DOC_CONFIG}-config.texi gdb-config.texi || \
-       cp ${srcdir}/${DOC_CONFIG}-config.texi gdb-config.texi
+gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
+       ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
+       ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
+       cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
 
 # GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
 # If your texinfo or makeinfo don't support these, get a new texinfo release

diff --git a/gdb/doc/all-cfg.texi b/gdb/doc/all-cfg.texi
new file mode 100644 (file)
index 0000000..022807c
--- /dev/null
+++ b/gdb/doc/all-cfg.texi
@@ -0,0 +1,107 @@
+@c GDB MANUAL configuration file.  
+@c Copyright (c) 1993 Free Software Foundation, Inc.
+@c
+@c NOTE: While the GDB manual is configurable (by changing these
+@c switches), its configuration is ***NOT*** automatically tied in to
+@c source configuration---because the authors expect that, save in
+@c unusual cases, the most inclusive form of the manual is appropriate
+@c no matter how the program itself is configured.
+@c
+@c The only automatically-varying variable is the GDB version number,
+@c which the Makefile rewrites based on the VERSION variable from
+@c `../Makefile.in'.  
+@c 
+@c GDB version number is recorded in the variable GDBVN
+@include GDBvn.texi
+@c
+@c ----------------------------------------------------------------------
+@c PLATFORM FLAGS:
+@set GENERIC
+@c
+@c Hitachi H8/300 target:
+@set H8
+@c Hitachi H8/300 target ONLY:
+@clear H8EXCLUSIVE
+@c
+@c remote MIPS target:
+@set MIPS
+@c
+@c SPARC target:
+@set SPARC
+@c
+@c AMD 29000 target:
+@set AMD29K
+@c
+@c Intel 960 target:
+@set I960
+@c
+@c Tandem ST2000 (phone switch) target:
+@set ST2000
+@c
+@c Zilog 8000 target:
+@set Z8K
+@c
+@c Lucid "Energize" environment:
+@clear LUCID
+@c
+@c Wind River Systems VxWorks environment:
+@set VXWORKS
+@c
+@c ----------------------------------------------------------------------
+@c DOC FEATURE FLAGS:
+@c 
+@c Include change-from-old?
+@set NOVEL
+@c
+@c Bare-board target?
+@clear BARETARGET
+@c
+@c Restrict languages discussed to C?
+@clear CONLY
+@c
+@c Specifically for host machine running DOS?
+@clear DOSHOST
+@c
+@c Talk about CPU simulator targets?
+@set SIMS
+@c
+@c Is manual stand-alone, or part of an agglomeration, with overall GPL?
+@clear AGGLOMERATION
+@c
+@c Remote serial line settings of interest?
+@set SERIAL
+@c
+@c Discuss features requiring Posix or similar OS environment?
+@set POSIX
+@c
+@c Discuss remote serial debugging stub?
+@set REMOTESTUB
+@c
+@c Refrain from discussing how to configure sw and format doc?
+@clear PRECONFIGURED
+@c
+@c Refrain from referring to unfree publications?
+@set FSFDOC
+@c
+@c ----------------------------------------------------------------------
+@c STRINGS:
+@c
+@c Name of GDB program.  Used also for (gdb) prompt string.
+@set GDBP gdb
+@c 
+@c Name of GDB product.  Used in running text.
+@set GDBN GDB
+@c
+@c Name of GDB initialization file.
+@set GDBINIT .gdbinit
+@c 
+@c Name of host.  Should not be used in generic configs, but generic
+@c value may catch some flubs.
+@set HOST machine specific
+@c
+@c Name of GCC product
+@set NGCC GCC
+@c 
+@c Name of GCC program
+@set GCC gcc
+

diff --git a/gdb/doc/all-config.texi b/gdb/doc/all-config.texi
index 022807c..e69de29 100644 (file)
--- a/gdb/doc/all-config.texi
+++ b/gdb/doc/all-config.texi
@@ -1,107 +0,0 @@
-@c GDB MANUAL configuration file.  
-@c Copyright (c) 1993 Free Software Foundation, Inc.
-@c
-@c NOTE: While the GDB manual is configurable (by changing these
-@c switches), its configuration is ***NOT*** automatically tied in to
-@c source configuration---because the authors expect that, save in
-@c unusual cases, the most inclusive form of the manual is appropriate
-@c no matter how the program itself is configured.
-@c
-@c The only automatically-varying variable is the GDB version number,
-@c which the Makefile rewrites based on the VERSION variable from
-@c `../Makefile.in'.  
-@c 
-@c GDB version number is recorded in the variable GDBVN
-@include GDBvn.texi
-@c
-@c ----------------------------------------------------------------------
-@c PLATFORM FLAGS:
-@set GENERIC
-@c
-@c Hitachi H8/300 target:
-@set H8
-@c Hitachi H8/300 target ONLY:
-@clear H8EXCLUSIVE
-@c
-@c remote MIPS target:
-@set MIPS
-@c
-@c SPARC target:
-@set SPARC
-@c
-@c AMD 29000 target:
-@set AMD29K
-@c
-@c Intel 960 target:
-@set I960
-@c
-@c Tandem ST2000 (phone switch) target:
-@set ST2000
-@c
-@c Zilog 8000 target:
-@set Z8K
-@c
-@c Lucid "Energize" environment:
-@clear LUCID
-@c
-@c Wind River Systems VxWorks environment:
-@set VXWORKS
-@c
-@c ----------------------------------------------------------------------
-@c DOC FEATURE FLAGS:
-@c 
-@c Include change-from-old?
-@set NOVEL
-@c
-@c Bare-board target?
-@clear BARETARGET
-@c
-@c Restrict languages discussed to C?
-@clear CONLY
-@c
-@c Specifically for host machine running DOS?
-@clear DOSHOST
-@c
-@c Talk about CPU simulator targets?
-@set SIMS
-@c
-@c Is manual stand-alone, or part of an agglomeration, with overall GPL?
-@clear AGGLOMERATION
-@c
-@c Remote serial line settings of interest?
-@set SERIAL
-@c
-@c Discuss features requiring Posix or similar OS environment?
-@set POSIX
-@c
-@c Discuss remote serial debugging stub?
-@set REMOTESTUB
-@c
-@c Refrain from discussing how to configure sw and format doc?
-@clear PRECONFIGURED
-@c
-@c Refrain from referring to unfree publications?
-@set FSFDOC
-@c
-@c ----------------------------------------------------------------------
-@c STRINGS:
-@c
-@c Name of GDB program.  Used also for (gdb) prompt string.
-@set GDBP gdb
-@c 
-@c Name of GDB product.  Used in running text.
-@set GDBN GDB
-@c
-@c Name of GDB initialization file.
-@set GDBINIT .gdbinit
-@c 
-@c Name of host.  Should not be used in generic configs, but generic
-@c value may catch some flubs.
-@set HOST machine specific
-@c
-@c Name of GCC product
-@set NGCC GCC
-@c 
-@c Name of GCC program
-@set GCC gcc
-

diff --git a/gdb/doc/h8-cfg.texi b/gdb/doc/h8-cfg.texi
new file mode 100644 (file)
index 0000000..167b522
--- /dev/null
+++ b/gdb/doc/h8-cfg.texi
@@ -0,0 +1,44 @@
+@c GDB version number is recorded in the variable GDBVN
+@include GDBvn.texi
+@c
+@set   AGGLOMERATION
+@clear AMD29K
+@set   BARETARGET
+@set   CONLY
+@set   DOSHOST
+@clear FSFDOC
+@clear GENERIC
+@set   H8
+@set   H8EXCLUSIVE
+@clear HAVE-FLOAT
+@clear I960
+@clear NOVEL
+@clear POSIX
+@set   PRECONFIGURED
+@clear REMOTESTUB
+@set   SIMS
+@clear SERIAL
+@clear SPARC
+@clear ST2000
+@clear VXWORKS
+@clear Z8K
+@c ----------------------------------------------------------------------
+@c STRINGS:
+@c
+@c Name of GDB program.  Used also for (gdb) prompt string.
+@set GDBP gdb
+@c 
+@c Name of GDB product.  Used in running text.
+@set GDBN GDB
+@c
+@c Name of GDB initialization file.
+@set GDBINIT .gdbinit
+@c 
+@c Name of target.
+@set TARGET Hitachi Microprocessors
+@c
+@c Name of GCC product
+@set NGCC GCC
+@c 
+@c Name of GCC program
+@set GCC gcc

diff --git a/gdb/doc/h8-config.texi b/gdb/doc/h8-config.texi
index 167b522..e69de29 100644 (file)
--- a/gdb/doc/h8-config.texi
+++ b/gdb/doc/h8-config.texi
@@ -1,44 +0,0 @@
-@c GDB version number is recorded in the variable GDBVN
-@include GDBvn.texi
-@c
-@set   AGGLOMERATION
-@clear AMD29K
-@set   BARETARGET
-@set   CONLY
-@set   DOSHOST
-@clear FSFDOC
-@clear GENERIC
-@set   H8
-@set   H8EXCLUSIVE
-@clear HAVE-FLOAT
-@clear I960
-@clear NOVEL
-@clear POSIX
-@set   PRECONFIGURED
-@clear REMOTESTUB
-@set   SIMS
-@clear SERIAL
-@clear SPARC
-@clear ST2000
-@clear VXWORKS
-@clear Z8K
-@c ----------------------------------------------------------------------
-@c STRINGS:
-@c
-@c Name of GDB program.  Used also for (gdb) prompt string.
-@set GDBP gdb
-@c 
-@c Name of GDB product.  Used in running text.
-@set GDBN GDB
-@c
-@c Name of GDB initialization file.
-@set GDBINIT .gdbinit
-@c 
-@c Name of target.
-@set TARGET Hitachi Microprocessors
-@c
-@c Name of GCC product
-@set NGCC GCC
-@c 
-@c Name of GCC program
-@set GCC gcc