i2c: pnx: Fix read transactions of >= 2 bytes
authorRoland Stigge <stigge@antcom.de>
Wed, 8 Aug 2012 07:42:32 +0000 (09:42 +0200)
committerWolfram Sang <w.sang@pengutronix.de>
Wed, 12 Sep 2012 15:52:44 +0000 (17:52 +0200)
On transactions with n>=2 bytes, the controller actually wrongly clocks in n+1
bytes. This is caused by the (wrong) assumption that RFE in the Status Register
is 1 iff there is no byte already ordered (via a dummy TX byte). This lead to
the implementation of synchronized byte ordering, e.g.:

Dummy-TX - RX - Dummy-TX - RX - ...

But since RFE actually stays high after some Dummy-TX, it rather looks like:

Dummy-TX - Dummy-TX - RX - Dummy-TX - RX - (RX)

The last RX byte is clocked in by the bus controller, but ignored by the kernel
when filling the userspace buffer.

This patch fixes the issue by asking for RX via Dummy-TX asynchronously.
Introducing a separate counter for TX bytes.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
drivers/i2c/busses/i2c-pnx.c
include/linux/i2c-pnx.h

index b36e21f..8488bdd 100644 (file)
@@ -291,31 +291,37 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
         * or we didn't 'ask' for it yet.
         */
        if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
-               dev_dbg(&alg_data->adapter.dev,
-                       "%s(): Write dummy data to fill Rx-fifo...\n",
-                       __func__);
+               /* 'Asking' is done asynchronously, e.g. dummy TX of several
+                * bytes is done before the first actual RX arrives in FIFO.
+                * Therefore, ordered bytes (via TX) are counted separately.
+                */
+               if (alg_data->mif.order) {
+                       dev_dbg(&alg_data->adapter.dev,
+                               "%s(): Write dummy data to fill Rx-fifo...\n",
+                               __func__);
 
-               if (alg_data->mif.len == 1) {
-                       /* Last byte, do not acknowledge next rcv. */
-                       val |= stop_bit;
+                       if (alg_data->mif.order == 1) {
+                               /* Last byte, do not acknowledge next rcv. */
+                               val |= stop_bit;
+
+                               /*
+                                * Enable interrupt RFDAIE (data in Rx fifo),
+                                * and disable DRMIE (need data for Tx)
+                                */
+                               ctl = ioread32(I2C_REG_CTL(alg_data));
+                               ctl |= mcntrl_rffie | mcntrl_daie;
+                               ctl &= ~mcntrl_drmie;
+                               iowrite32(ctl, I2C_REG_CTL(alg_data));
+                       }
 
                        /*
-                        * Enable interrupt RFDAIE (data in Rx fifo),
-                        * and disable DRMIE (need data for Tx)
+                        * Now we'll 'ask' for data:
+                        * For each byte we want to receive, we must
+                        * write a (dummy) byte to the Tx-FIFO.
                         */
-                       ctl = ioread32(I2C_REG_CTL(alg_data));
-                       ctl |= mcntrl_rffie | mcntrl_daie;
-                       ctl &= ~mcntrl_drmie;
-                       iowrite32(ctl, I2C_REG_CTL(alg_data));
+                       iowrite32(val, I2C_REG_TX(alg_data));
+                       alg_data->mif.order--;
                }
-
-               /*
-                * Now we'll 'ask' for data:
-                * For each byte we want to receive, we must
-                * write a (dummy) byte to the Tx-FIFO.
-                */
-               iowrite32(val, I2C_REG_TX(alg_data));
-
                return 0;
        }
 
@@ -515,6 +521,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 
                alg_data->mif.buf = pmsg->buf;
                alg_data->mif.len = pmsg->len;
+               alg_data->mif.order = pmsg->len;
                alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ?
                        I2C_SMBUS_READ : I2C_SMBUS_WRITE;
                alg_data->mif.ret = 0;
@@ -567,6 +574,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
        /* Cleanup to be sure... */
        alg_data->mif.buf = NULL;
        alg_data->mif.len = 0;
+       alg_data->mif.order = 0;
 
        dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x\n",
                __func__, ioread32(I2C_REG_STS(alg_data)));
index 1bc74af..49ed17f 100644 (file)
@@ -22,6 +22,7 @@ struct i2c_pnx_mif {
        struct timer_list       timer;          /* Timeout */
        u8 *                    buf;            /* Data buffer */
        int                     len;            /* Length of data buffer */
+       int                     order;          /* RX Bytes to order via TX */
 };
 
 struct i2c_pnx_algo_data {