gma500: Add medfield header
authorAlan Cox <alan@linux.intel.com>
Fri, 15 Jul 2011 18:34:26 +0000 (19:34 +0100)
committerGreg Kroah-Hartman <gregkh@suse.de>
Sat, 16 Jul 2011 07:05:38 +0000 (09:05 +0200)
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/gma500/medfield.h [new file with mode: 0644]

diff --git a/drivers/staging/gma500/medfield.h b/drivers/staging/gma500/medfield.h
new file mode 100644 (file)
index 0000000..38165e8
--- /dev/null
@@ -0,0 +1,270 @@
+/*
+ * Copyright © 2011 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#define DRM_MODE_ENCODER_MIPI  5
+
+/* Medfield DSI controller registers */
+
+#define MIPIA_DEVICE_READY_REG                         0xb000
+#define MIPIA_INTR_STAT_REG                            0xb004
+#define MIPIA_INTR_EN_REG                              0xb008
+#define MIPIA_DSI_FUNC_PRG_REG                         0xb00c
+#define MIPIA_HS_TX_TIMEOUT_REG                                0xb010
+#define MIPIA_LP_RX_TIMEOUT_REG                                0xb014
+#define MIPIA_TURN_AROUND_TIMEOUT_REG                  0xb018
+#define MIPIA_DEVICE_RESET_TIMER_REG                   0xb01c
+#define MIPIA_DPI_RESOLUTION_REG                       0xb020
+#define MIPIA_DBI_FIFO_THROTTLE_REG                    0xb024
+#define MIPIA_HSYNC_COUNT_REG                          0xb028
+#define MIPIA_HBP_COUNT_REG                            0xb02c
+#define MIPIA_HFP_COUNT_REG                            0xb030
+#define MIPIA_HACTIVE_COUNT_REG                                0xb034
+#define MIPIA_VSYNC_COUNT_REG                          0xb038
+#define MIPIA_VBP_COUNT_REG                            0xb03c
+#define MIPIA_VFP_COUNT_REG                            0xb040
+#define MIPIA_HIGH_LOW_SWITCH_COUNT_REG                        0xb044
+#define MIPIA_DPI_CONTROL_REG                          0xb048
+#define MIPIA_DPI_DATA_REG                             0xb04c
+#define MIPIA_INIT_COUNT_REG                           0xb050
+#define MIPIA_MAX_RETURN_PACK_SIZE_REG                 0xb054
+#define MIPIA_VIDEO_MODE_FORMAT_REG                    0xb058
+#define MIPIA_EOT_DISABLE_REG                          0xb05c
+#define MIPIA_LP_BYTECLK_REG                           0xb060
+#define MIPIA_LP_GEN_DATA_REG                          0xb064
+#define MIPIA_HS_GEN_DATA_REG                          0xb068
+#define MIPIA_LP_GEN_CTRL_REG                          0xb06c
+#define MIPIA_HS_GEN_CTRL_REG                          0xb070
+#define MIPIA_GEN_FIFO_STAT_REG                                0xb074
+#define MIPIA_HS_LS_DBI_ENABLE_REG                     0xb078
+#define MIPIA_DPHY_PARAM_REG                           0xb080
+#define MIPIA_DBI_BW_CTRL_REG                          0xb084
+#define MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG             0xb088
+
+#define DSI_DEVICE_READY                               (0x1)
+#define DSI_POWER_STATE_ULPS_ENTER                     (0x2 << 1)
+#define DSI_POWER_STATE_ULPS_EXIT                      (0x1 << 1)
+#define DSI_POWER_STATE_ULPS_OFFSET                    (0x1)
+
+
+#define DSI_ONE_DATA_LANE                              (0x1)
+#define DSI_TWO_DATA_LANE                              (0x2)
+#define DSI_THREE_DATA_LANE                            (0X3)
+#define DSI_FOUR_DATA_LANE                             (0x4)
+#define DSI_DPI_VIRT_CHANNEL_OFFSET                    (0x3)
+#define DSI_DBI_VIRT_CHANNEL_OFFSET                    (0x5)
+#define DSI_DPI_COLOR_FORMAT_RGB565                    (0x01 << 7)
+#define DSI_DPI_COLOR_FORMAT_RGB666                    (0x02 << 7)
+#define DSI_DPI_COLOR_FORMAT_RGB666_UNPACK             (0x03 << 7)
+#define DSI_DPI_COLOR_FORMAT_RGB888                    (0x04 << 7)
+#define DSI_DBI_COLOR_FORMAT_OPTION2                   (0x05 << 13)
+
+#define DSI_INTR_STATE_RXSOTERROR                      1
+
+#define DSI_INTR_STATE_SPL_PKG_SENT                    (1 << 30)
+#define DSI_INTR_STATE_TE                              (1 << 31)
+
+#define DSI_HS_TX_TIMEOUT_MASK                         (0xffffff)
+
+#define DSI_LP_RX_TIMEOUT_MASK                         (0xffffff)
+
+#define DSI_TURN_AROUND_TIMEOUT_MASK                   (0x3f)
+
+#define DSI_RESET_TIMER_MASK                           (0xffff)
+
+#define DSI_DBI_FIFO_WM_HALF                           (0x0)
+#define DSI_DBI_FIFO_WM_QUARTER                                (0x1)
+#define DSI_DBI_FIFO_WM_LOW                            (0x2)
+
+#define DSI_DPI_TIMING_MASK                            (0xffff)
+
+#define DSI_INIT_TIMER_MASK                            (0xffff)
+
+#define DSI_DBI_RETURN_PACK_SIZE_MASK                  (0x3ff)
+
+#define DSI_LP_BYTECLK_MASK                            (0x0ffff)
+
+#define DSI_HS_CTRL_GEN_SHORT_W0                       (0x03)
+#define DSI_HS_CTRL_GEN_SHORT_W1                       (0x13)
+#define DSI_HS_CTRL_GEN_SHORT_W2                       (0x23)
+#define DSI_HS_CTRL_GEN_R0                             (0x04)
+#define DSI_HS_CTRL_GEN_R1                             (0x14)
+#define DSI_HS_CTRL_GEN_R2                             (0x24)
+#define DSI_HS_CTRL_GEN_LONG_W                         (0x29)
+#define DSI_HS_CTRL_MCS_SHORT_W0                       (0x05)
+#define DSI_HS_CTRL_MCS_SHORT_W1                       (0x15)
+#define DSI_HS_CTRL_MCS_R0                             (0x06)
+#define DSI_HS_CTRL_MCS_LONG_W                         (0x39)
+#define DSI_HS_CTRL_VC_OFFSET                          (0x06)
+#define DSI_HS_CTRL_WC_OFFSET                          (0x08)
+
+#define        DSI_FIFO_GEN_HS_DATA_FULL                       (1 << 0)
+#define DSI_FIFO_GEN_HS_DATA_HALF_EMPTY                        (1 << 1)
+#define DSI_FIFO_GEN_HS_DATA_EMPTY                     (1 << 2)
+#define DSI_FIFO_GEN_LP_DATA_FULL                      (1 << 8)
+#define DSI_FIFO_GEN_LP_DATA_HALF_EMPTY                        (1 << 9)
+#define DSI_FIFO_GEN_LP_DATA_EMPTY                     (1 << 10)
+#define DSI_FIFO_GEN_HS_CTRL_FULL                      (1 << 16)
+#define DSI_FIFO_GEN_HS_CTRL_HALF_EMPTY                        (1 << 17)
+#define DSI_FIFO_GEN_HS_CTRL_EMPTY                     (1 << 18)
+#define DSI_FIFO_GEN_LP_CTRL_FULL                      (1 << 24)
+#define DSI_FIFO_GEN_LP_CTRL_HALF_EMPTY                        (1 << 25)
+#define DSI_FIFO_GEN_LP_CTRL_EMPTY                     (1 << 26)
+#define DSI_FIFO_DBI_EMPTY                             (1 << 27)
+#define DSI_FIFO_DPI_EMPTY                             (1 << 28)
+
+#define DSI_DBI_HS_LP_SWITCH_MASK                      (0x1)
+
+#define DSI_HS_LP_SWITCH_COUNTER_OFFSET                        (0x0)
+#define DSI_LP_HS_SWITCH_COUNTER_OFFSET                        (0x16)
+
+#define DSI_DPI_CTRL_HS_SHUTDOWN                       (0x00000001)
+#define DSI_DPI_CTRL_HS_TURN_ON                                (0x00000002)
+
+/* Medfield DSI adapter registers */
+#define MIPIA_CONTROL_REG                              0xb104
+#define MIPIA_DATA_ADD_REG                             0xb108
+#define MIPIA_DATA_LEN_REG                             0xb10c
+#define MIPIA_CMD_ADD_REG                              0xb110
+#define MIPIA_CMD_LEN_REG                              0xb114
+
+/*dsi power modes*/
+#define DSI_POWER_MODE_DISPLAY_ON      (1 << 2)
+#define DSI_POWER_MODE_NORMAL_ON       (1 << 3)
+#define DSI_POWER_MODE_SLEEP_OUT       (1 << 4)
+#define DSI_POWER_MODE_PARTIAL_ON      (1 << 5)
+#define DSI_POWER_MODE_IDLE_ON         (1 << 6)
+
+enum {
+       MDFLD_DSI_ENCODER_DBI = 0,
+       MDFLD_DSI_ENCODER_DPI,
+};
+
+enum {
+       MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_PULSE = 1,
+       MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_EVENTS = 2,
+       MDFLD_DSI_VIDEO_BURST_MODE = 3,
+};
+
+#define DSI_DPI_COMPLETE_LAST_LINE                     (1 << 2)
+#define DSI_DPI_DISABLE_BTA                            (1 << 3)
+/* Panel types */
+enum {
+       TPO_CMD,
+       TPO_VID,
+       TMD_CMD,
+       TMD_VID,
+       PYR_CMD,
+       PYR_VID,
+       TPO,
+       TMD,
+       PYR,
+       HDMI,
+       GCT_DETECT
+};
+
+/* Junk that belongs elsewhere */
+#define TPO_PANEL_WIDTH                84
+#define TPO_PANEL_HEIGHT       46
+#define TMD_PANEL_WIDTH                39
+#define TMD_PANEL_HEIGHT       71
+#define PYR_PANEL_WIDTH                53
+#define PYR_PANEL_HEIGHT       95
+
+/* Panel interface */
+struct panel_info {
+       u32 width_mm;
+       u32 height_mm;
+};
+
+struct mdfld_dsi_dbi_output;
+
+struct mdfld_dsi_connector_state {
+       u32 mipi_ctrl_reg;
+};
+
+struct mdfld_dsi_encoder_state {
+
+};
+
+struct mdfld_dsi_connector {
+       /*
+        * This is ugly, but I have to use connector in it! :-(
+        * FIXME: use drm_connector instead.
+        */
+       struct psb_intel_output base;
+
+       int pipe;
+       void *private;
+       void *pkg_sender;
+
+       /* Connection status */
+       enum drm_connector_status status;
+};
+
+struct mdfld_dsi_encoder {
+       struct drm_encoder base;
+       void *private;
+};
+
+/*
+ * DSI config, consists of one DSI connector, two DSI encoders.
+ * DRM will pick up on DSI encoder basing on differents configs.
+ */
+struct mdfld_dsi_config {
+       struct drm_device *dev;
+       struct drm_display_mode *fixed_mode;
+       struct drm_display_mode *mode;
+
+       struct mdfld_dsi_connector *connector;
+       struct mdfld_dsi_encoder *encoders[DRM_CONNECTOR_MAX_ENCODER];
+       struct mdfld_dsi_encoder *encoder;
+
+       int changed;
+
+       int bpp;
+       int type;
+       int lane_count;
+       /*Virtual channel number for this encoder*/
+       int channel_num;
+       /*video mode configure*/
+       int video_mode;
+
+       int dvr_ic_inited;
+};
+
+#define MDFLD_DSI_CONNECTOR(psb_output) \
+               (container_of(psb_output, struct mdfld_dsi_connector, base))
+
+#define MDFLD_DSI_ENCODER(encoder) \
+               (container_of(encoder, struct mdfld_dsi_encoder, base))
+
+struct panel_funcs {
+       const struct drm_encoder_funcs *encoder_funcs;
+       const struct drm_encoder_helper_funcs *encoder_helper_funcs;
+       struct drm_display_mode *(*get_config_mode) (struct drm_device *);
+       void (*update_fb) (struct mdfld_dsi_dbi_output *, int);
+       int (*get_panel_info) (struct drm_device *, int, struct panel_info *);
+       int (*reset)(int pipe);
+       void (*drv_ic_init)(struct mdfld_dsi_config *dsi_config, int pipe);
+};
+