dev->priv = coredev;
dev->driver_type = RC_DRIVER_IR_RAW;
- dev->allowed_protos = RC_TYPE_ALL;
+ dev->allowed_protos = RC_BIT_ALL;
dev->map_name = sms_get_board(board_id)->rc_codes;
dev->driver_name = MODULE_NAME;
{
char *ir_codes = NULL;
const char *name = NULL;
- u64 rc_type = RC_TYPE_UNKNOWN;
+ u64 rc_type = RC_BIT_UNKNOWN;
struct IR_i2c *ir;
struct rc_dev *rc = NULL;
struct i2c_adapter *adap = client->adapter;
case 0x64:
name = "Pixelview";
ir->get_key = get_key_pixelview;
- rc_type = RC_TYPE_OTHER;
+ rc_type = RC_BIT_OTHER;
ir_codes = RC_MAP_EMPTY;
break;
case 0x18:
case 0x1a:
name = "Hauppauge";
ir->get_key = get_key_haup;
- rc_type = RC_TYPE_RC5;
+ rc_type = RC_BIT_RC5;
ir_codes = RC_MAP_HAUPPAUGE;
break;
case 0x30:
name = "KNC One";
ir->get_key = get_key_knc1;
- rc_type = RC_TYPE_OTHER;
+ rc_type = RC_BIT_OTHER;
ir_codes = RC_MAP_EMPTY;
break;
case 0x6b:
name = "FusionHDTV";
ir->get_key = get_key_fusionhdtv;
- rc_type = RC_TYPE_RC5;
+ rc_type = RC_BIT_RC5;
ir_codes = RC_MAP_FUSIONHDTV_MCE;
break;
case 0x40:
name = "AVerMedia Cardbus remote";
ir->get_key = get_key_avermedia_cardbus;
- rc_type = RC_TYPE_OTHER;
+ rc_type = RC_BIT_OTHER;
ir_codes = RC_MAP_AVERMEDIA_CARDBUS;
break;
case 0x71:
name = "Hauppauge/Zilog Z8";
ir->get_key = get_key_haup_xvr;
- rc_type = RC_TYPE_RC5;
+ rc_type = RC_BIT_RC5;
ir_codes = RC_MAP_HAUPPAUGE;
break;
}
case CX18_HW_Z8F0811_IR_RX_HAUP:
init_data->ir_codes = RC_MAP_HAUPPAUGE;
init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
- init_data->type = RC_TYPE_RC5;
+ init_data->type = RC_BIT_RC5;
init_data->name = cx->card_name;
info.platform_data = init_data;
break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
/* Integrated CX2388[58] IR controller */
driver_type = RC_DRIVER_IR_RAW;
- allowed_protos = RC_TYPE_ALL;
+ allowed_protos = RC_BIT_ALL;
/* The grey Hauppauge RC-5 remote */
rc_map = RC_MAP_HAUPPAUGE;
break;
case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
/* Integrated CX23885 IR controller */
driver_type = RC_DRIVER_IR_RAW;
- allowed_protos = RC_TYPE_NEC;
+ allowed_protos = RC_BIT_NEC;
/* The grey Terratec remote with orange buttons */
rc_map = RC_MAP_NEC_TERRATEC_CINERGY_XS;
break;
case CX23885_BOARD_TEVII_S470:
/* Integrated CX23885 IR controller */
driver_type = RC_DRIVER_IR_RAW;
- allowed_protos = RC_TYPE_ALL;
+ allowed_protos = RC_BIT_ALL;
/* A guess at the remote */
rc_map = RC_MAP_TEVII_NEC;
break;
struct cx88_IR *ir;
struct rc_dev *dev;
char *ir_codes = NULL;
- u64 rc_type = RC_TYPE_OTHER;
+ u64 rc_type = RC_BIT_OTHER;
int err = -ENOMEM;
u32 hardware_mask = 0; /* For devices with a hardware mask, when
* used with a full-code IR table
break;
case CX88_BOARD_TWINHAN_VP1027_DVBS:
ir_codes = RC_MAP_TWINHAN_VP1027_DVBS;
- rc_type = RC_TYPE_NEC;
+ rc_type = RC_BIT_NEC;
ir->sampling = 0xff00; /* address */
break;
}
case CX88_BOARD_LEADTEK_PVR2000:
addr_list = pvr2000_addr_list;
core->init_data.name = "cx88 Leadtek PVR 2000 remote";
- core->init_data.type = RC_TYPE_UNKNOWN;
+ core->init_data.type = RC_BIT_UNKNOWN;
core->init_data.get_key = get_key_pvr2000;
core->init_data.ir_codes = RC_MAP_EMPTY;
break;
/* Hauppauge XVR */
core->init_data.name = "cx88 Hauppauge XVR remote";
core->init_data.ir_codes = RC_MAP_HAUPPAUGE;
- core->init_data.type = RC_TYPE_RC5;
+ core->init_data.type = RC_BIT_RC5;
core->init_data.internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
info.platform_data = &core->init_data;
init_data->ir_codes = RC_MAP_AVERMEDIA_CARDBUS;
init_data->internal_get_key_func =
IR_KBD_GET_KEY_AVERMEDIA_CARDBUS;
- init_data->type = RC_TYPE_OTHER;
+ init_data->type = RC_BIT_OTHER;
init_data->name = "AVerMedia AVerTV card";
break;
case IVTV_HW_I2C_IR_RX_HAUP_EXT:
case IVTV_HW_I2C_IR_RX_HAUP_INT:
init_data->ir_codes = RC_MAP_HAUPPAUGE;
init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP;
- init_data->type = RC_TYPE_RC5;
+ init_data->type = RC_BIT_RC5;
init_data->name = itv->card_name;
break;
case IVTV_HW_Z8F0811_IR_RX_HAUP:
/* Default to grey remote */
init_data->ir_codes = RC_MAP_HAUPPAUGE;
init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
- init_data->type = RC_TYPE_RC5;
+ init_data->type = RC_BIT_RC5;
init_data->name = itv->card_name;
break;
case IVTV_HW_I2C_IR_RX_ADAPTEC:
init_data->name = itv->card_name;
/* FIXME: The protocol and RC_MAP needs to be corrected */
init_data->ir_codes = RC_MAP_EMPTY;
- init_data->type = RC_TYPE_UNKNOWN;
+ init_data->type = RC_BIT_UNKNOWN;
break;
}
dev->init_data.name = "BeholdTV";
dev->init_data.get_key = get_key_beholdm6xx;
dev->init_data.ir_codes = RC_MAP_BEHOLD;
- dev->init_data.type = RC_TYPE_NEC;
+ dev->init_data.type = RC_BIT_NEC;
info.addr = 0x2d;
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS_501:
rdev->priv = ati_remote;
rdev->driver_type = RC_DRIVER_SCANCODE;
- rdev->allowed_protos = RC_TYPE_OTHER;
+ rdev->allowed_protos = RC_BIT_OTHER;
rdev->driver_name = "ati_remote";
rdev->open = ati_remote_rc_open;
learning_mode_force = false;
rdev->driver_type = RC_DRIVER_IR_RAW;
- rdev->allowed_protos = RC_TYPE_ALL;
+ rdev->allowed_protos = RC_BIT_ALL;
rdev->priv = dev;
rdev->open = ene_open;
rdev->close = ene_close;
/* Set up the rc device */
rdev->priv = fintek;
rdev->driver_type = RC_DRIVER_IR_RAW;
- rdev->allowed_protos = RC_TYPE_ALL;
+ rdev->allowed_protos = RC_BIT_ALL;
rdev->open = fintek_open;
rdev->close = fintek_close;
rdev->input_name = FINTEK_DESCRIPTION;
if (pdata->allowed_protos)
rcdev->allowed_protos = pdata->allowed_protos;
else
- rcdev->allowed_protos = RC_TYPE_ALL;
+ rcdev->allowed_protos = RC_BIT_ALL;
rcdev->map_name = pdata->map_name ?: RC_MAP_EMPTY;
gpio_dev->rcdev = rcdev;
usb_to_input_id(ir->udev, &rc->input_id);
rc->dev.parent = &intf->dev;
rc->driver_type = RC_DRIVER_IR_RAW;
- rc->allowed_protos = RC_TYPE_ALL;
+ rc->allowed_protos = RC_BIT_ALL;
rc->priv = ir;
rc->open = iguanair_open;
rc->close = iguanair_close;
* it is not, so we must acquire it prior to calling send_packet, which
* requires that the lock is held.
*/
-static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
+static int imon_ir_change_protocol(struct rc_dev *rc, u64 *rc_type)
{
int retval;
struct imon_context *ictx = rc->priv;
unsigned char ir_proto_packet[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
- if (rc_type && !(rc_type & rc->allowed_protos))
+ if (*rc_type && !(*rc_type & rc->allowed_protos))
dev_warn(dev, "Looks like you're trying to use an IR protocol "
"this device does not support\n");
- switch (rc_type) {
- case RC_TYPE_RC6:
+ if (*rc_type & RC_BIT_RC6_MCE) {
dev_dbg(dev, "Configuring IR receiver for MCE protocol\n");
ir_proto_packet[0] = 0x01;
- break;
- case RC_TYPE_UNKNOWN:
- case RC_TYPE_OTHER:
+ *rc_type = RC_BIT_RC6_MCE;
+ } else if (*rc_type & RC_BIT_OTHER) {
dev_dbg(dev, "Configuring IR receiver for iMON protocol\n");
if (!pad_stabilize)
dev_dbg(dev, "PAD stabilize functionality disabled\n");
/* ir_proto_packet[0] = 0x00; // already the default */
- rc_type = RC_TYPE_OTHER;
- break;
- default:
+ *rc_type = RC_BIT_OTHER;
+ } else {
dev_warn(dev, "Unsupported IR protocol specified, overriding "
"to iMON IR protocol\n");
if (!pad_stabilize)
dev_dbg(dev, "PAD stabilize functionality disabled\n");
/* ir_proto_packet[0] = 0x00; // already the default */
- rc_type = RC_TYPE_OTHER;
- break;
+ *rc_type = RC_BIT_OTHER;
}
memcpy(ictx->usb_tx_buf, &ir_proto_packet, sizeof(ir_proto_packet));
if (retval)
goto out;
- ictx->rc_type = rc_type;
+ ictx->rc_type = *rc_type;
ictx->pad_mouse = false;
out:
rel_x = buf[2];
rel_y = buf[3];
- if (ictx->rc_type == RC_TYPE_OTHER && pad_stabilize) {
+ if (ictx->rc_type == RC_BIT_OTHER && pad_stabilize) {
if ((buf[1] == 0) && ((rel_x != 0) || (rel_y != 0))) {
dir = stabilize((int)rel_x, (int)rel_y,
timeout, threshold);
buf[0] = 0x01;
buf[1] = buf[4] = buf[5] = buf[6] = buf[7] = 0;
- if (ictx->rc_type == RC_TYPE_OTHER && pad_stabilize) {
+ if (ictx->rc_type == RC_BIT_OTHER && pad_stabilize) {
dir = stabilize((int)rel_x, (int)rel_y,
timeout, threshold);
if (!dir) {
kc = imon_panel_key_lookup(scancode);
} else {
scancode = be32_to_cpu(*((u32 *)buf));
- if (ictx->rc_type == RC_TYPE_RC6) {
+ if (ictx->rc_type == RC_BIT_RC6_MCE) {
ktype = IMON_KEY_IMON;
if (buf[0] == 0x80)
ktype = IMON_KEY_MCE;
{
u8 ffdc_cfg_byte = ictx->usb_rx_buf[6];
u8 detected_display_type = IMON_DISPLAY_TYPE_NONE;
- u64 allowed_protos = RC_TYPE_OTHER;
+ u64 allowed_protos = RC_BIT_OTHER;
switch (ffdc_cfg_byte) {
/* iMON Knob, no display, iMON IR + vol knob */
case 0x9e:
dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR");
detected_display_type = IMON_DISPLAY_TYPE_VFD;
- allowed_protos = RC_TYPE_RC6;
+ allowed_protos = RC_BIT_RC6_MCE;
break;
/* iMON LCD, MCE IR */
case 0x9f:
dev_info(ictx->dev, "0xffdc iMON LCD, MCE IR");
detected_display_type = IMON_DISPLAY_TYPE_LCD;
- allowed_protos = RC_TYPE_RC6;
+ allowed_protos = RC_BIT_RC6_MCE;
break;
default:
dev_info(ictx->dev, "Unknown 0xffdc device, "
detected_display_type = IMON_DISPLAY_TYPE_VFD;
/* We don't know which one it is, allow user to set the
* RC6 one from userspace if OTHER wasn't correct. */
- allowed_protos |= RC_TYPE_RC6;
+ allowed_protos |= RC_BIT_RC6_MCE;
break;
}
rdev->priv = ictx;
rdev->driver_type = RC_DRIVER_SCANCODE;
- rdev->allowed_protos = RC_TYPE_OTHER | RC_TYPE_RC6; /* iMON PAD or MCE */
+ rdev->allowed_protos = RC_BIT_OTHER | RC_BIT_RC6_MCE; /* iMON PAD or MCE */
rdev->change_protocol = imon_ir_change_protocol;
rdev->driver_name = MOD_NAME;
imon_set_display_type(ictx);
- if (ictx->rc_type == RC_TYPE_RC6)
+ if (ictx->rc_type == RC_BIT_RC6_MCE)
rdev->map_name = RC_MAP_IMON_MCE;
else
rdev->map_name = RC_MAP_IMON_PAD;
{
struct jvc_dec *data = &dev->raw->jvc;
- if (!(dev->raw->enabled_protocols & RC_TYPE_JVC))
+ if (!(dev->raw->enabled_protocols & RC_BIT_JVC))
return 0;
if (!is_timing_event(ev)) {
}
static struct ir_raw_handler jvc_handler = {
- .protocols = RC_TYPE_JVC,
+ .protocols = RC_BIT_JVC,
.decode = ir_jvc_decode,
};
struct lirc_codec *lirc = &dev->raw->lirc;
int sample;
- if (!(dev->raw->enabled_protocols & RC_TYPE_LIRC))
+ if (!(dev->raw->enabled_protocols & RC_BIT_LIRC))
return 0;
if (!dev->raw->lirc.drv || !dev->raw->lirc.drv->rbuf)
}
static struct ir_raw_handler lirc_handler = {
- .protocols = RC_TYPE_LIRC,
+ .protocols = RC_BIT_LIRC,
.decode = ir_lirc_decode,
.raw_register = ir_lirc_register,
.raw_unregister = ir_lirc_unregister,
u32 scancode;
unsigned long delay;
- if (!(dev->raw->enabled_protocols & RC_TYPE_MCE_KBD))
+ if (!(dev->raw->enabled_protocols & RC_BIT_MCE_KBD))
return 0;
if (!is_timing_event(ev)) {
}
static struct ir_raw_handler mce_kbd_handler = {
- .protocols = RC_TYPE_MCE_KBD,
+ .protocols = RC_BIT_MCE_KBD,
.decode = ir_mce_kbd_decode,
.raw_register = ir_mce_kbd_register,
.raw_unregister = ir_mce_kbd_unregister,
u8 address, not_address, command, not_command;
bool send_32bits = false;
- if (!(dev->raw->enabled_protocols & RC_TYPE_NEC))
+ if (!(dev->raw->enabled_protocols & RC_BIT_NEC))
return 0;
if (!is_timing_event(ev)) {
}
static struct ir_raw_handler nec_handler = {
- .protocols = RC_TYPE_NEC,
+ .protocols = RC_BIT_NEC,
.decode = ir_nec_decode,
};
u8 toggle;
u32 scancode;
- if (!(dev->raw->enabled_protocols & RC_TYPE_RC5))
- return 0;
+ if (!(dev->raw->enabled_protocols & (RC_BIT_RC5 | RC_BIT_RC5X)))
+ return 0;
if (!is_timing_event(ev)) {
if (ev.reset)
if (data->wanted_bits == RC5X_NBITS) {
/* RC5X */
u8 xdata, command, system;
+ if (!(dev->raw->enabled_protocols & RC_BIT_RC5X)) {
+ data->state = STATE_INACTIVE;
+ return 0;
+ }
xdata = (data->bits & 0x0003F) >> 0;
command = (data->bits & 0x00FC0) >> 6;
system = (data->bits & 0x1F000) >> 12;
} else {
/* RC5 */
u8 command, system;
+ if (!(dev->raw->enabled_protocols & RC_BIT_RC5)) {
+ data->state = STATE_INACTIVE;
+ return 0;
+ }
command = (data->bits & 0x0003F) >> 0;
system = (data->bits & 0x007C0) >> 6;
toggle = (data->bits & 0x00800) ? 1 : 0;
}
static struct ir_raw_handler rc5_handler = {
- .protocols = RC_TYPE_RC5,
+ .protocols = RC_BIT_RC5 | RC_BIT_RC5X,
.decode = ir_rc5_decode,
};
u8 toggle, command, system;
u32 scancode;
- if (!(dev->raw->enabled_protocols & RC_TYPE_RC5_SZ))
- return 0;
+ if (!(dev->raw->enabled_protocols & RC_BIT_RC5_SZ))
+ return 0;
if (!is_timing_event(ev)) {
if (ev.reset)
}
static struct ir_raw_handler rc5_sz_handler = {
- .protocols = RC_TYPE_RC5_SZ,
+ .protocols = RC_BIT_RC5_SZ,
.decode = ir_rc5_sz_decode,
};
u32 scancode;
u8 toggle;
- if (!(dev->raw->enabled_protocols & RC_TYPE_RC6))
+ if (!(dev->raw->enabled_protocols &
+ (RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 | RC_BIT_RC6_6A_24 |
+ RC_BIT_RC6_6A_32 | RC_BIT_RC6_MCE)))
return 0;
if (!is_timing_event(ev)) {
}
static struct ir_raw_handler rc6_handler = {
- .protocols = RC_TYPE_RC6,
+ .protocols = RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 |
+ RC_BIT_RC6_6A_24 | RC_BIT_RC6_6A_32 |
+ RC_BIT_RC6_MCE,
.decode = ir_rc6_decode,
};
u32 scancode;
u8 address, command, not_command;
- if (!(dev->raw->enabled_protocols & RC_TYPE_SANYO))
+ if (!(dev->raw->enabled_protocols & RC_BIT_SANYO))
return 0;
if (!is_timing_event(ev)) {
}
static struct ir_raw_handler sanyo_handler = {
- .protocols = RC_TYPE_SANYO,
+ .protocols = RC_BIT_SANYO,
.decode = ir_sanyo_decode,
};
u32 scancode;
u8 device, subdevice, function;
- if (!(dev->raw->enabled_protocols & RC_TYPE_SONY))
+ if (!(dev->raw->enabled_protocols &
+ (RC_BIT_SONY12 | RC_BIT_SONY15 | RC_BIT_SONY20)))
return 0;
if (!is_timing_event(ev)) {
switch (data->count) {
case 12:
+ if (!(dev->raw->enabled_protocols & RC_BIT_SONY12)) {
+ data->state = STATE_INACTIVE;
+ return 0;
+ }
device = bitrev8((data->bits << 3) & 0xF8);
subdevice = 0;
function = bitrev8((data->bits >> 4) & 0xFE);
break;
case 15:
+ if (!(dev->raw->enabled_protocols & RC_BIT_SONY15)) {
+ data->state = STATE_INACTIVE;
+ return 0;
+ }
device = bitrev8((data->bits >> 0) & 0xFF);
subdevice = 0;
function = bitrev8((data->bits >> 7) & 0xFE);
break;
case 20:
+ if (!(dev->raw->enabled_protocols & RC_BIT_SONY20)) {
+ data->state = STATE_INACTIVE;
+ return 0;
+ }
device = bitrev8((data->bits >> 5) & 0xF8);
subdevice = bitrev8((data->bits >> 0) & 0xFF);
function = bitrev8((data->bits >> 12) & 0xFE);
}
static struct ir_raw_handler sony_handler = {
- .protocols = RC_TYPE_SONY,
+ .protocols = RC_BIT_SONY12 | RC_BIT_SONY15 | RC_BIT_SONY20,
.decode = ir_sony_decode,
};
/* set up ir-core props */
rdev->priv = itdev;
rdev->driver_type = RC_DRIVER_IR_RAW;
- rdev->allowed_protos = RC_TYPE_ALL;
+ rdev->allowed_protos = RC_BIT_ALL;
rdev->open = ite_open;
rdev->close = ite_close;
rdev->s_idle = ite_s_idle;
.scan = imon_mce,
.size = ARRAY_SIZE(imon_mce),
/* its RC6, but w/a hardware decoder */
- .rc_type = RC_TYPE_RC6,
+ .rc_type = RC_TYPE_RC6_MCE,
.name = RC_MAP_IMON_MCE,
}
};
.map = {
.scan = rc6_mce,
.size = ARRAY_SIZE(rc6_mce),
- .rc_type = RC_TYPE_RC6,
+ .rc_type = RC_TYPE_RC6_MCE,
.name = RC_MAP_RC6_MCE,
}
};
rc->dev.parent = dev;
rc->priv = ir;
rc->driver_type = RC_DRIVER_IR_RAW;
- rc->allowed_protos = RC_TYPE_ALL;
+ rc->allowed_protos = RC_BIT_ALL;
rc->timeout = MS_TO_NS(100);
if (!ir->flags.no_tx) {
rc->s_tx_mask = mceusb_set_tx_mask;
/* Set up the rc device */
rdev->priv = nvt;
rdev->driver_type = RC_DRIVER_IR_RAW;
- rdev->allowed_protos = RC_TYPE_ALL;
+ rdev->allowed_protos = RC_BIT_ALL;
rdev->open = nvt_open;
rdev->close = nvt_close;
rdev->tx_ir = nvt_tx_ir;
rc->map_name = RC_MAP_EMPTY;
rc->priv = &loopdev;
rc->driver_type = RC_DRIVER_IR_RAW;
- rc->allowed_protos = RC_TYPE_ALL;
+ rc->allowed_protos = RC_BIT_ALL;
rc->timeout = 100 * 1000 * 1000; /* 100 ms */
rc->min_timeout = 1;
rc->max_timeout = UINT_MAX;
.devnode = ir_devnode,
};
+/*
+ * These are the protocol textual descriptions that are
+ * used by the sysfs protocols file. Note that the order
+ * of the entries is relevant.
+ */
static struct {
u64 type;
char *name;
} proto_names[] = {
- { RC_TYPE_UNKNOWN, "unknown" },
- { RC_TYPE_RC5, "rc-5" },
- { RC_TYPE_NEC, "nec" },
- { RC_TYPE_RC6, "rc-6" },
- { RC_TYPE_JVC, "jvc" },
- { RC_TYPE_SONY, "sony" },
- { RC_TYPE_RC5_SZ, "rc-5-sz" },
- { RC_TYPE_SANYO, "sanyo" },
- { RC_TYPE_MCE_KBD, "mce_kbd" },
- { RC_TYPE_LIRC, "lirc" },
- { RC_TYPE_OTHER, "other" },
+ { RC_BIT_NONE, "none" },
+ { RC_BIT_OTHER, "other" },
+ { RC_BIT_UNKNOWN, "unknown" },
+ { RC_BIT_RC5 |
+ RC_BIT_RC5X, "rc-5" },
+ { RC_BIT_NEC, "nec" },
+ { RC_BIT_RC6_0 |
+ RC_BIT_RC6_6A_20 |
+ RC_BIT_RC6_6A_24 |
+ RC_BIT_RC6_6A_32 |
+ RC_BIT_RC6_MCE, "rc-6" },
+ { RC_BIT_JVC, "jvc" },
+ { RC_BIT_SONY12 |
+ RC_BIT_SONY15 |
+ RC_BIT_SONY20, "sony" },
+ { RC_BIT_RC5_SZ, "rc-5-sz" },
+ { RC_BIT_SANYO, "sanyo" },
+ { RC_BIT_MCE_KBD, "mce_kbd" },
+ { RC_BIT_LIRC, "lirc" },
};
-#define PROTO_NONE "none"
-
/**
* show_protocols() - shows the current IR protocol(s)
* @device: the device descriptor
tmp += sprintf(tmp, "[%s] ", proto_names[i].name);
else if (allowed & proto_names[i].type)
tmp += sprintf(tmp, "%s ", proto_names[i].name);
+
+ if (allowed & proto_names[i].type)
+ allowed &= ~proto_names[i].type;
}
if (tmp != buf)
disable = false;
}
- if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) {
- tmp += sizeof(PROTO_NONE);
- mask = 0;
- count++;
- } else {
- for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
- if (!strcasecmp(tmp, proto_names[i].name)) {
- tmp += strlen(proto_names[i].name);
- mask = proto_names[i].type;
- break;
- }
- }
- if (i == ARRAY_SIZE(proto_names)) {
- IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
- ret = -EINVAL;
- goto out;
+ for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
+ if (!strcasecmp(tmp, proto_names[i].name)) {
+ mask = proto_names[i].type;
+ break;
}
- count++;
}
+ if (i == ARRAY_SIZE(proto_names)) {
+ IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
+ return -EINVAL;
+ }
+
+ count++;
+
if (enable)
type |= mask;
else if (disable)
}
if (dev->change_protocol) {
- rc = dev->change_protocol(dev, type);
+ rc = dev->change_protocol(dev, &type);
if (rc < 0) {
IR_dprintk(1, "Error setting protocols to 0x%llx\n",
(long long)type);
}
if (dev->change_protocol) {
- rc = dev->change_protocol(dev, rc_map->rc_type);
+ u64 rc_type = (1 << rc_map->rc_type);
+ rc = dev->change_protocol(dev, &rc_type);
if (rc < 0)
goto out_raw;
}
rc->dev.parent = dev;
rc->priv = rr3;
rc->driver_type = RC_DRIVER_IR_RAW;
- rc->allowed_protos = RC_TYPE_ALL;
+ rc->allowed_protos = RC_BIT_ALL;
rc->timeout = US_TO_NS(2750);
rc->tx_ir = redrat3_transmit_ir;
rc->s_tx_carrier = redrat3_set_tx_carrier;
rdev->dev.parent = dev;
rdev->priv = sz;
rdev->driver_type = RC_DRIVER_IR_RAW;
- rdev->allowed_protos = RC_TYPE_ALL;
+ rdev->allowed_protos = RC_BIT_ALL;
rdev->driver_name = DRIVER_NAME;
rdev->map_name = RC_MAP_STREAMZAP;
usb_to_input_id(tt->udev, &rc->input_id);
rc->dev.parent = &intf->dev;
rc->driver_type = RC_DRIVER_IR_RAW;
- rc->allowed_protos = RC_TYPE_ALL;
+ rc->allowed_protos = RC_BIT_ALL;
rc->priv = tt;
rc->driver_name = DRIVER_NAME;
rc->map_name = RC_MAP_TT_1500;
data->dev->priv = data;
data->dev->dev.parent = &device->dev;
data->dev->timeout = MS_TO_NS(100);
- data->dev->allowed_protos = RC_TYPE_ALL;
+ data->dev->allowed_protos = RC_BIT_ALL;
if (!request_region(data->wbase, WAKEUP_IOMEM_LEN, DRVNAME)) {
dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
/* The i2c micro-controller only outputs the cmd part of NEC protocol */
dev->init_data.rc_dev->scanmask = 0xff;
dev->init_data.rc_dev->driver_name = "cx231xx";
- dev->init_data.type = RC_TYPE_NEC;
+ dev->init_data.type = RC_BIT_NEC;
info.addr = 0x30;
/* Load and bind ir-kbd-i2c */
if (!rc->map_name)
rc->map_name = RC_MAP_EMPTY;
- rc->allowed_protos = RC_TYPE_NEC;
+ rc->allowed_protos = RC_BIT_NEC;
rc->query = af9015_rc_query;
rc->interval = 500;
switch (tmp) {
case 0: /* NEC */
default:
- rc->allowed_protos = RC_TYPE_NEC;
+ rc->allowed_protos = RC_BIT_NEC;
break;
case 1: /* RC6 */
- rc->allowed_protos = RC_TYPE_RC6;
+ rc->allowed_protos = RC_BIT_RC6_MCE;
break;
}
static int anysee_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
{
- rc->allowed_protos = RC_TYPE_NEC;
+ rc->allowed_protos = RC_BIT_NEC;
rc->query = anysee_rc_query;
rc->interval = 250; /* windows driver uses 500ms */
{
pr_debug("Getting az6007 Remote Control properties\n");
- rc->allowed_protos = RC_TYPE_NEC;
+ rc->allowed_protos = RC_BIT_NEC;
rc->query = az6007_rc_query;
rc->interval = 400;
struct dvb_usb_rc {
const char *map_name;
u64 allowed_protos;
- int (*change_protocol)(struct rc_dev *dev, u64 rc_type);
+ int (*change_protocol)(struct rc_dev *dev, u64 *rc_type);
int (*query) (struct dvb_usb_device *d);
unsigned int interval;
const enum rc_driver_type driver_type;
return 0;
}
- rc->allowed_protos = RC_TYPE_NEC;
+ rc->allowed_protos = RC_BIT_NEC;
rc->query = it913x_rc_query;
rc->interval = 250;
static int lme2510_get_rc_config(struct dvb_usb_device *d,
struct dvb_usb_rc *rc)
{
- rc->allowed_protos = RC_TYPE_NEC;
+ rc->allowed_protos = RC_BIT_NEC;
return 0;
}
struct dvb_usb_rc *rc)
{
rc->map_name = RC_MAP_EMPTY;
- rc->allowed_protos = RC_TYPE_NEC;
+ rc->allowed_protos = RC_BIT_NEC;
rc->query = rtl2831u_rc_query;
rc->interval = 400;
struct dvb_usb_rc *rc)
{
rc->map_name = RC_MAP_EMPTY;
- rc->allowed_protos = RC_TYPE_NEC;
+ rc->allowed_protos = RC_BIT_NEC;
rc->query = rtl2832u_rc_query;
rc->interval = 400;
extern struct i2c_algorithm dib0700_i2c_algo;
extern int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
struct dvb_usb_device_description **desc, int *cold);
-extern int dib0700_change_protocol(struct rc_dev *dev, u64 rc_type);
+extern int dib0700_change_protocol(struct rc_dev *dev, u64 *rc_type);
extern int dib0700_set_i2c_speed(struct dvb_usb_device *d, u16 scl_kHz);
extern int dib0700_device_count;
return ret;
}
-int dib0700_change_protocol(struct rc_dev *rc, u64 rc_type)
+int dib0700_change_protocol(struct rc_dev *rc, u64 *rc_type)
{
struct dvb_usb_device *d = rc->priv;
struct dib0700_state *st = d->priv;
st->buf[2] = 0;
/* Set the IR mode */
- if (rc_type == RC_TYPE_RC5)
+ if (*rc_type & RC_BIT_RC5) {
new_proto = 1;
- else if (rc_type == RC_TYPE_NEC)
+ *rc_type = RC_BIT_RC5;
+ } else if (*rc_type & RC_BIT_NEC) {
new_proto = 0;
- else if (rc_type == RC_TYPE_RC6) {
+ *rc_type = RC_BIT_NEC;
+ } else if (*rc_type & RC_BIT_RC6_MCE) {
if (st->fw_version < 0x10200) {
ret = -EINVAL;
goto out;
}
-
new_proto = 2;
+ *rc_type = RC_BIT_RC6_MCE;
} else {
ret = -EINVAL;
goto out;
goto out;
}
- d->props.rc.core.protocol = rc_type;
+ d->props.rc.core.protocol = *rc_type;
out:
mutex_unlock(&d->usb_mutex);
purb->actual_length);
switch (d->props.rc.core.protocol) {
- case RC_TYPE_NEC:
+ case RC_BIT_NEC:
toggle = 0;
/* NEC protocol sends repeat code as 0 0 0 FF */
d->last_event = 0;
switch (d->props.rc.core.protocol) {
- case RC_TYPE_NEC:
+ case RC_BIT_NEC:
/* NEC protocol sends repeat code as 0 0 0 FF */
if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
(key[3] == 0xff))
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_NEC_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_NEC_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .allowed_protos = RC_TYPE_RC5 |
- RC_TYPE_RC6 |
- RC_TYPE_NEC,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
},
u64 protocol;
u64 allowed_protos;
enum rc_driver_type driver_type;
- int (*change_protocol)(struct rc_dev *dev, u64 rc_type);
+ int (*change_protocol)(struct rc_dev *dev, u64 *rc_type);
char *module_name;
int (*rc_query) (struct dvb_usb_device *d);
int rc_interval;
.rc.core = {
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
- .allowed_protos = RC_TYPE_UNKNOWN,
+ .allowed_protos = RC_BIT_UNKNOWN,
.rc_query = pctv452e_rc_query,
.rc_interval = 100,
},
.rc.core = {
.rc_codes = RC_MAP_TT_1500,
- .allowed_protos = RC_TYPE_UNKNOWN,
+ .allowed_protos = RC_BIT_UNKNOWN,
.rc_query = pctv452e_rc_query,
.rc_interval = 100,
},
.rc_codes = RC_MAP_TECHNISAT_USB2,
.module_name = "technisat-usb2",
.rc_query = technisat_usb2_rc_query,
- .allowed_protos = RC_TYPE_ALL,
+ .allowed_protos = RC_BIT_ALL,
.driver_type = RC_DRIVER_IR_RAW,
}
};
.rc_interval = 150, /* Less than IR_KEYPRESS_TIMEOUT */
.rc_codes = RC_MAP_TT_1500,
.rc_query = tt3650_rc_query,
- .allowed_protos = RC_TYPE_UNKNOWN,
+ .allowed_protos = RC_BIT_UNKNOWN,
},
.num_adapters = 1,
cancel_delayed_work_sync(&ir->work);
}
-static int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 rc_type)
+static int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 *rc_type)
{
int rc = 0;
struct em28xx_IR *ir = rc_dev->priv;
/* Adjust xclk based o IR table for RC5/NEC tables */
- if (rc_type == RC_TYPE_RC5) {
+ if (*rc_type & RC_BIT_RC5) {
dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE;
ir->full_code = 1;
- } else if (rc_type == RC_TYPE_NEC) {
+ *rc_type = RC_BIT_RC5;
+ } else if (*rc_type & RC_BIT_NEC) {
dev->board.xclk &= ~EM28XX_XCLK_IR_RC5_MODE;
ir_config = EM2874_IR_NEC;
ir->full_code = 1;
- } else if (rc_type != RC_TYPE_UNKNOWN)
+ *rc_type = RC_BIT_NEC;
+ } else if (*rc_type != RC_BIT_UNKNOWN)
rc = -EINVAL;
em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk,
struct em28xx_IR *ir;
struct rc_dev *rc;
int err = -ENOMEM;
+ u64 rc_type;
if (dev->board.ir_codes == NULL) {
/* No remote control support */
* em2874 supports more protocols. For now, let's just announce
* the two protocols that were already tested
*/
- rc->allowed_protos = RC_TYPE_RC5 | RC_TYPE_NEC;
+ rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC;
rc->priv = ir;
rc->change_protocol = em28xx_ir_change_protocol;
rc->open = em28xx_ir_start;
rc->close = em28xx_ir_stop;
/* By default, keep protocol field untouched */
- err = em28xx_ir_change_protocol(rc, RC_TYPE_UNKNOWN);
+ rc_type = RC_BIT_UNKNOWN;
+ err = em28xx_ir_change_protocol(rc, &rc_type);
if (err)
goto err_out_free;
/* Our default information for ir-kbd-i2c.c to use */
init_data->ir_codes = RC_MAP_HAUPPAUGE;
init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
- init_data->type = RC_TYPE_RC5;
+ init_data->type = RC_BIT_RC5;
init_data->name = "HD-PVR";
init_data->polling_interval = 405; /* ms, duplicated from Windows */
hdpvr_ir_rx_i2c_board_info.platform_data = init_data;
case PVR2_IR_SCHEME_29XXX: /* Original 29xxx device */
init_data->ir_codes = RC_MAP_HAUPPAUGE;
init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP;
- init_data->type = RC_TYPE_RC5;
+ init_data->type = RC_BIT_RC5;
init_data->name = hdw->hdw_desc->description;
init_data->polling_interval = 100; /* ms From ir-kbd-i2c */
/* IR Receiver */
case PVR2_IR_SCHEME_24XXX_MCE: /* 24xxx MCE device */
init_data->ir_codes = RC_MAP_HAUPPAUGE;
init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
- init_data->type = RC_TYPE_RC5;
+ init_data->type = RC_BIT_RC5;
init_data->name = hdw->hdw_desc->description;
/* IR Receiver */
info.addr = 0x71;
*/
switch (ir->rc_type) {
- case RC_TYPE_NEC:
+ case RC_BIT_NEC:
leader = 900; /* ms */
pulse = 700; /* ms - the actual value would be 562 */
break;
default:
- case RC_TYPE_RC5:
+ case RC_BIT_RC5:
leader = 900; /* ms - from the NEC decoding */
pulse = 1780; /* ms - The actual value would be 1776 */
break;
pulse = ir_clock_mhz * pulse;
leader = ir_clock_mhz * leader;
- if (ir->rc_type == RC_TYPE_NEC)
+ if (ir->rc_type == RC_BIT_NEC)
leader = leader | 0x8000;
dprintk(2, "%s: %s, %d MHz, leader = 0x%04x, pulse = 0x%06x \n",
__func__,
- (ir->rc_type == RC_TYPE_NEC) ? "NEC" : "RC-5",
+ (ir->rc_type == RC_BIT_NEC) ? "NEC" : "RC-5",
ir_clock_mhz, leader, pulse);
/* Remote WAKEUP = enable, normal mode, from IR decoder output */
cancel_delayed_work_sync(&ir->work);
}
-static int tm6000_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
+static int tm6000_ir_change_protocol(struct rc_dev *rc, u64 *rc_type)
{
struct tm6000_IR *ir = rc->priv;
dprintk(2, "%s\n",__func__);
- if ((rc->rc_map.scan) && (rc_type == RC_TYPE_NEC))
+ if ((rc->rc_map.scan) && (*rc_type == RC_BIT_NEC))
ir->key_addr = ((rc->rc_map.scan[0].scancode >> 8) & 0xffff);
- ir->rc_type = rc_type;
+ ir->rc_type = *rc_type;
tm6000_ir_config(ir);
/* TODO */
struct tm6000_IR *ir;
struct rc_dev *rc;
int err = -ENOMEM;
+ u64 rc_type;
if (!enable_ir)
return -ENODEV;
ir->rc = rc;
/* input setup */
- rc->allowed_protos = RC_TYPE_RC5 | RC_TYPE_NEC;
+ rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC;
/* Neded, in order to support NEC remotes with 24 or 32 bits */
rc->scanmask = 0xffff;
rc->priv = ir;
usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
strlcat(ir->phys, "/input0", sizeof(ir->phys));
- tm6000_ir_change_protocol(rc, RC_TYPE_UNKNOWN);
+ rc_type = RC_BIT_UNKNOWN;
+ tm6000_ir_change_protocol(rc, &rc_type);
rc->input_name = ir->name;
rc->input_phys = ir->phys;
struct IR_i2c_init_data {
char *ir_codes;
const char *name;
- u64 type; /* RC_TYPE_RC5, etc */
+ u64 type; /* RC_BIT_RC5, etc */
u32 polling_interval; /* 0 means DEFAULT_POLLING_INTERVAL */
/*
* @input_dev: the input child device used to communicate events to userspace
* @driver_type: specifies if protocol decoding is done in hardware or software
* @idle: used to keep track of RX state
- * @allowed_protos: bitmask with the supported RC_TYPE_* protocols
+ * @allowed_protos: bitmask with the supported RC_BIT_* protocols
* @scanmask: some hardware decoders are not capable of providing the full
* scancode to the application. As this is a hardware limit, we can't do
* anything with it. Yet, as the same keycode table can be used with other
u32 max_timeout;
u32 rx_resolution;
u32 tx_resolution;
- int (*change_protocol)(struct rc_dev *dev, u64 rc_type);
+ int (*change_protocol)(struct rc_dev *dev, u64 *rc_type);
int (*open)(struct rc_dev *dev);
void (*close)(struct rc_dev *dev);
int (*s_tx_mask)(struct rc_dev *dev, u32 mask);
#include <linux/input.h>
-#define RC_TYPE_UNKNOWN 0
-#define RC_TYPE_RC5 (1 << 0) /* Philips RC5 protocol */
-#define RC_TYPE_NEC (1 << 1)
-#define RC_TYPE_RC6 (1 << 2) /* Philips RC6 protocol */
-#define RC_TYPE_JVC (1 << 3) /* JVC protocol */
-#define RC_TYPE_SONY (1 << 4) /* Sony12/15/20 protocol */
-#define RC_TYPE_RC5_SZ (1 << 5) /* RC5 variant used by Streamzap */
-#define RC_TYPE_SANYO (1 << 6) /* Sanyo protocol */
-#define RC_TYPE_MCE_KBD (1 << 29) /* RC6-ish MCE keyboard/mouse */
-#define RC_TYPE_LIRC (1 << 30) /* Pass raw IR to lirc userspace */
-#define RC_TYPE_OTHER (1u << 31)
+enum rc_type {
+ RC_TYPE_UNKNOWN = 0, /* Protocol not known */
+ RC_TYPE_OTHER = 1, /* Protocol known but proprietary */
+ RC_TYPE_LIRC = 2, /* Pass raw IR to lirc userspace */
+ RC_TYPE_RC5 = 3, /* Philips RC5 protocol */
+ RC_TYPE_RC5X = 4, /* Philips RC5x protocol */
+ RC_TYPE_RC5_SZ = 5, /* StreamZap variant of RC5 */
+ RC_TYPE_JVC = 6, /* JVC protocol */
+ RC_TYPE_SONY12 = 7, /* Sony 12 bit protocol */
+ RC_TYPE_SONY15 = 8, /* Sony 15 bit protocol */
+ RC_TYPE_SONY20 = 9, /* Sony 20 bit protocol */
+ RC_TYPE_NEC = 10, /* NEC protocol */
+ RC_TYPE_SANYO = 11, /* Sanyo protocol */
+ RC_TYPE_MCE_KBD = 12, /* RC6-ish MCE keyboard/mouse */
+ RC_TYPE_RC6_0 = 13, /* Philips RC6-0-16 protocol */
+ RC_TYPE_RC6_6A_20 = 14, /* Philips RC6-6A-20 protocol */
+ RC_TYPE_RC6_6A_24 = 15, /* Philips RC6-6A-24 protocol */
+ RC_TYPE_RC6_6A_32 = 16, /* Philips RC6-6A-32 protocol */
+ RC_TYPE_RC6_MCE = 17, /* MCE (Philips RC6-6A-32 subtype) protocol */
+};
+
+#define RC_BIT_NONE 0
+#define RC_BIT_UNKNOWN (1 << RC_TYPE_UNKNOWN)
+#define RC_BIT_OTHER (1 << RC_TYPE_OTHER)
+#define RC_BIT_LIRC (1 << RC_TYPE_LIRC)
+#define RC_BIT_RC5 (1 << RC_TYPE_RC5)
+#define RC_BIT_RC5X (1 << RC_TYPE_RC5X)
+#define RC_BIT_RC5_SZ (1 << RC_TYPE_RC5_SZ)
+#define RC_BIT_JVC (1 << RC_TYPE_JVC)
+#define RC_BIT_SONY12 (1 << RC_TYPE_SONY12)
+#define RC_BIT_SONY15 (1 << RC_TYPE_SONY15)
+#define RC_BIT_SONY20 (1 << RC_TYPE_SONY20)
+#define RC_BIT_NEC (1 << RC_TYPE_NEC)
+#define RC_BIT_SANYO (1 << RC_TYPE_SANYO)
+#define RC_BIT_MCE_KBD (1 << RC_TYPE_MCE_KBD)
+#define RC_BIT_RC6_0 (1 << RC_TYPE_RC6_0)
+#define RC_BIT_RC6_6A_20 (1 << RC_TYPE_RC6_6A_20)
+#define RC_BIT_RC6_6A_24 (1 << RC_TYPE_RC6_6A_24)
+#define RC_BIT_RC6_6A_32 (1 << RC_TYPE_RC6_6A_32)
+#define RC_BIT_RC6_MCE (1 << RC_TYPE_RC6_MCE)
-#define RC_TYPE_ALL (RC_TYPE_RC5 | RC_TYPE_NEC | RC_TYPE_RC6 | \
- RC_TYPE_JVC | RC_TYPE_SONY | RC_TYPE_LIRC | \
- RC_TYPE_RC5_SZ | RC_TYPE_SANYO | RC_TYPE_MCE_KBD | \
- RC_TYPE_OTHER)
+#define RC_BIT_ALL (RC_BIT_UNKNOWN | RC_BIT_OTHER | RC_BIT_LIRC | \
+ RC_BIT_RC5 | RC_BIT_RC5X | RC_BIT_RC5_SZ | \
+ RC_BIT_JVC | \
+ RC_BIT_SONY12 | RC_BIT_SONY15 | RC_BIT_SONY20 | \
+ RC_BIT_NEC | RC_BIT_SANYO | RC_BIT_MCE_KBD | \
+ RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 | RC_BIT_RC6_6A_24 | \
+ RC_BIT_RC6_6A_32 | RC_BIT_RC6_MCE)
struct rc_map_table {
u32 scancode;
unsigned int size; /* Max number of entries */
unsigned int len; /* Used number of entries */
unsigned int alloc; /* Size of *scan in bytes */
- u64 rc_type;
+ enum rc_type rc_type;
const char *name;
spinlock_t lock;
};
projects / platform / kernel / linux-rpi.git / commitdiff