[r300] Document based on chapter 10.4 and 10.5

This commit adds most of the graphics backend registers and of the rasterizer
registers. Again, some minor bugs were found and marked with TODO or even
fixed.

diff --git a/src/mesa/drivers/dri/r300/r300_reg.h b/src/mesa/drivers/dri/r300/r300_reg.h
index b127353..4031db3 100644 (file)
--- a/src/mesa/drivers/dri/r300/r300_reg.h
+++ b/src/mesa/drivers/dri/r300/r300_reg.h
@@ -484,17 +484,23 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
  * (or something closely related to that).
  * This bit is rather fatal at the time being due to lackings at pixel
  * shader side
+ * Specifies top of Raster pipe specific enable controls.
  */
 #define R300_GB_ENABLE 0x4008
-#      define R300_GB_POINT_STUFF_ENABLE       (1<<0)
-#      define R300_GB_LINE_STUFF_ENABLE        (1<<1)
-#      define R300_GB_TRIANGLE_STUFF_ENABLE    (1<<2)
-#      define R300_GB_STENCIL_AUTO_ENABLE      (1<<4)
-#      define R300_GB_UNK31                    (1<<31)
+#      define R300_GB_POINT_STUFF_DISABLE     (0 << 0)
+#      define R300_GB_POINT_STUFF_ENABLE      (1 << 0) /* Specifies if points will have stuffed texture coordinates. */
+#      define R300_GB_LINE_STUFF_DISABLE      (0 << 1)
+#      define R300_GB_LINE_STUFF_ENABLE       (1 << 1) /* Specifies if lines will have stuffed texture coordinates. */
+#      define R300_GB_TRIANGLE_STUFF_DISABLE  (0 << 2)
+#      define R300_GB_TRIANGLE_STUFF_ENABLE   (1 << 2) /* Specifies if triangles will have stuffed texture coordinates. */
+#      define R300_GB_STENCIL_AUTO_DISABLE    (0 << 4)
+#      define R300_GB_STENCIL_AUTO_ENABLE     (1 << 4) /* Enable stencil auto inc/dec based on triangle cw/ccw, force into dzy low bit. */
+#      define R300_GB_STENCIL_AUTO_FORCE      (2 << 4) /* Force 0 into dzy low bit. */
+
        /* each of the following is 2 bits wide */
-#define R300_GB_TEX_REPLICATE  0
-#define R300_GB_TEX_ST         1
-#define R300_GB_TEX_STR                2
+#define R300_GB_TEX_REPLICATE  0 /* Replicate VAP source texture coordinates (S,T,[R,Q]). */
+#define R300_GB_TEX_ST         1 /* Stuff with source texture coordinates (S,T). */
+#define R300_GB_TEX_STR                2 /* Stuff with source texture coordinates (S,T,R). */
 #      define R300_GB_TEX0_SOURCE_SHIFT        16
 #      define R300_GB_TEX1_SOURCE_SHIFT        18
 #      define R300_GB_TEX2_SOURCE_SHIFT        20
@@ -505,7 +511,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #      define R300_GB_TEX7_SOURCE_SHIFT        30
 
 /* MSPOS - positions for multisample antialiasing (?) */
-#define R300_GB_MSPOS0 0x4010
+#define R300_GB_MSPOS0                           0x4010
        /* shifts - each of the fields is 4 bits */
 #      define R300_GB_MSPOS0__MS_X0_SHIFT      0
 #      define R300_GB_MSPOS0__MS_Y0_SHIFT      4
@@ -516,7 +522,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #      define R300_GB_MSPOS0__MSBD0_Y          24
 #      define R300_GB_MSPOS0__MSBD0_X          28
 
-#define R300_GB_MSPOS1 0x4014
+#define R300_GB_MSPOS1                           0x4014
 #      define R300_GB_MSPOS1__MS_X3_SHIFT      0
 #      define R300_GB_MSPOS1__MS_Y3_SHIFT      4
 #      define R300_GB_MSPOS1__MS_X4_SHIFT      8
@@ -525,31 +531,47 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #      define R300_GB_MSPOS1__MS_Y5_SHIFT      20
 #      define R300_GB_MSPOS1__MSBD1            24
 
-
-#define R300_GB_TILE_CONFIG    0x4018
-#      define R300_GB_TILE_ENABLE      (1<<0)
-#      define R300_GB_TILE_PIPE_COUNT_RV300    0
-#      define R300_GB_TILE_PIPE_COUNT_R300     (3<<1)
-#      define R300_GB_TILE_PIPE_COUNT_R420     (7<<1)
-#      define R300_GB_TILE_PIPE_COUNT_RV410    (3<<1)
-#      define R300_GB_TILE_SIZE_8              0
-#      define R300_GB_TILE_SIZE_16             (1<<4)
-#      define R300_GB_TILE_SIZE_32             (2<<4)
-#      define R300_GB_SUPER_SIZE_1             (0<<6)
-#      define R300_GB_SUPER_SIZE_2             (1<<6)
-#      define R300_GB_SUPER_SIZE_4             (2<<6)
-#      define R300_GB_SUPER_SIZE_8             (3<<6)
-#      define R300_GB_SUPER_SIZE_16            (4<<6)
-#      define R300_GB_SUPER_SIZE_32            (5<<6)
-#      define R300_GB_SUPER_SIZE_64            (6<<6)
-#      define R300_GB_SUPER_SIZE_128           (7<<6)
+/* Specifies the graphics pipeline configuration for rasterization. */
+#define R300_GB_TILE_CONFIG                      0x4018
+#      define R300_GB_TILE_DISABLE             (0 << 0)
+#      define R300_GB_TILE_ENABLE              (1 << 0)
+#      define R300_GB_TILE_PIPE_COUNT_RV300    (0 << 1) /* RV350 (1 pipe, 1 ctx) */
+#      define R300_GB_TILE_PIPE_COUNT_R300     (3 << 1) /* R300 (2 pipes, 1 ctx) */
+#      define R300_GB_TILE_PIPE_COUNT_R420_3P  (6 << 1) /* R420-3P (3 pipes, 1 ctx) */
+#      define R300_GB_TILE_PIPE_COUNT_R420     (7 << 1) /* R420 (4 pipes, 1 ctx) */
+#      define R300_GB_TILE_SIZE_8              (0 << 4)
+#      define R300_GB_TILE_SIZE_16             (1 << 4)
+#      define R300_GB_TILE_SIZE_32             (2 << 4)
+#      define R300_GB_SUPER_SIZE_1             (0 << 6)
+#      define R300_GB_SUPER_SIZE_2             (1 << 6)
+#      define R300_GB_SUPER_SIZE_4             (2 << 6)
+#      define R300_GB_SUPER_SIZE_8             (3 << 6)
+#      define R300_GB_SUPER_SIZE_16            (4 << 6)
+#      define R300_GB_SUPER_SIZE_32            (5 << 6)
+#      define R300_GB_SUPER_SIZE_64            (6 << 6)
+#      define R300_GB_SUPER_SIZE_128           (7 << 6)
 #      define R300_GB_SUPER_X_SHIFT            9       /* 3 bits wide */
 #      define R300_GB_SUPER_Y_SHIFT            12      /* 3 bits wide */
-#      define R300_GB_SUPER_TILE_A             0
-#      define R300_GB_SUPER_TILE_B             (1<<15)
-#      define R300_GB_SUBPIXEL_1_12            0
-#      define R300_GB_SUBPIXEL_1_16            (1<<16)
-
+#      define R300_GB_SUPER_TILE_A             (0 << 15)
+#      define R300_GB_SUPER_TILE_B             (1 << 15)
+#      define R300_GB_SUBPIXEL_1_12            (0 << 16)
+#      define R300_GB_SUBPIXEL_1_16            (1 << 16)
+#      define GB_TILE_CONFIG_QUADS_PER_RAS_4   (0 << 17)
+#      define GB_TILE_CONFIG_QUADS_PER_RAS_8   (1 << 17)
+#      define GB_TILE_CONFIG_QUADS_PER_RAS_16  (2 << 17)
+#      define GB_TILE_CONFIG_QUADS_PER_RAS_32  (3 << 17)
+#      define GB_TILE_CONFIG_BB_SCAN_INTERCEPT (0 << 19)
+#      define GB_TILE_CONFIG_BB_SCAN_BOUND_BOX (1 << 19)
+#      define GB_TILE_CONFIG_ALT_SCAN_EN_LR    (0 << 20)
+#      define GB_TILE_CONFIG_ALT_SCAN_EN_LRL   (1 << 20)
+#      define GB_TILE_CONFIG_ALT_OFFSET        (0 << 21)
+#      define GB_TILE_CONFIG_SUBPRECISION      (0 << 22)
+#      define GB_TILE_CONFIG_ALT_TILING_DEF    (0 << 23)
+#      define GB_TILE_CONFIG_ALT_TILING_3_2    (1 << 23)
+#      define GB_TILE_CONFIG_Z_EXTENDED_24_1   (0 << 24)
+#      define GB_TILE_CONFIG_Z_EXTENDED_S25_1  (1 << 24)
+
+/* Specifies the sizes of the various FIFO`s in the sc/rs/us. This register must be the first one written */
 #define R300_GB_FIFO_SIZE      0x4024
        /* each of the following is 2 bits wide */
 #define R300_GB_FIFO_SIZE_32   0
@@ -573,25 +595,108 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #      define R300_OFIFO_HIGHWATER_SHIFT       22      /* two bits only */
 #      define R300_CUBE_FIFO_HIGHWATER_COL_SHIFT       24
 
-#define R300_GB_SELECT 0x401C
-#      define R300_GB_FOG_SELECT_C0A           0
-#      define R300_GB_FOG_SELECT_C1A           1
-#      define R300_GB_FOG_SELECT_C2A           2
-#      define R300_GB_FOG_SELECT_C3A           3
-#      define R300_GB_FOG_SELECT_1_1_W 4
-#      define R300_GB_FOG_SELECT_Z             5
-#      define R300_GB_DEPTH_SELECT_Z           0
-#      define R300_GB_DEPTH_SELECT_1_1_W       (1<<3)
-#      define R300_GB_W_SELECT_1_W             0
-#      define R300_GB_W_SELECT_1               (1<<4)
-
-#define R300_GB_AA_CONFIG              0x4020
-#      define R300_AA_DISABLE                  0x00
-#      define R300_AA_ENABLE                   0x01
-#      define R300_AA_SUBSAMPLES_2             0
-#      define R300_AA_SUBSAMPLES_3             (1<<1)
-#      define R300_AA_SUBSAMPLES_4             (2<<1)
-#      define R300_AA_SUBSAMPLES_6             (3<<1)
+#define GB_Z_PEQ_CONFIG                          0x4028
+#      define GB_Z_PEQ_CONFIG_Z_PEQ_SIZE_4_4    (0 << 0)
+#      define GB_Z_PEQ_CONFIG_Z_PEQ_SIZE_8_8    (1 << 0)
+
+/* Specifies various polygon specific selects (fog, depth, perspective). */
+#define R300_GB_SELECT                           0x401c
+#      define R300_GB_FOG_SELECT_C0A           (0 << 0)
+#      define R300_GB_FOG_SELECT_C1A           (1 << 0)
+#      define R300_GB_FOG_SELECT_C2A           (2 << 0)
+#      define R300_GB_FOG_SELECT_C3A           (3 << 0)
+#      define R300_GB_FOG_SELECT_1_1_W         (4 << 0)
+#      define R300_GB_FOG_SELECT_Z             (5 << 0)
+#      define R300_GB_DEPTH_SELECT_Z           (0 << 3
+#      define R300_GB_DEPTH_SELECT_1_1_W       (1 << 3)
+#      define R300_GB_W_SELECT_1_W             (0 << 4)
+#      define R300_GB_W_SELECT_1               (1 << 4)
+#      define R300_GB_FOG_STUFF_DISABLE        (0 << 5)
+#      define R300_GB_FOG_STUFF_ENABLE         (1 << 5)
+#      define R300_GB_FOG_STUFF_TEX_SHIFT      6
+#      define R300_GB_FOG_STUFF_TEX_MASK       0x000003c0
+#      define R300_GB_FOG_STUFF_COMP_SHIFT     10
+#      define R300_GB_FOG_STUFF_COMP_MASK      0x00000c00
+
+/* Specifies the graphics pipeline configuration for antialiasing. */
+#define GB_AA_CONFIG                                    0x4020
+#      define GB_AA_CONFIG_AA_DISABLE           (0 << 0)
+#      define GB_AA_CONFIG_AA_ENABLE            (1 << 0)
+#      define GB_AA_CONFIG_NUM_AA_SUBSAMPLES_2  (0 << 1)
+#      define GB_AA_CONFIG_NUM_AA_SUBSAMPLES_3  (1 << 1)
+#      define GB_AA_CONFIG_NUM_AA_SUBSAMPLES_4  (2 << 1)
+#      define GB_AA_CONFIG_NUM_AA_SUBSAMPLES_6  (3 << 1)
+
+/* Selects which of 4 pipes are active. */
+#define GB_PIPE_SELECT                           0x402c
+#      define GB_PIPE_SELECT_PIPE0_ID_SHIFT  0
+#      define GB_PIPE_SELECT_PIPE1_ID_SHIFT  2
+#      define GB_PIPE_SELECT_PIPE2_ID_SHIFT  4
+#      define GB_PIPE_SELECT_PIPE3_ID_SHIFT  6
+#      define GB_PIPE_SELECT_PIPE_MASK_SHIFT 8
+#      define GB_PIPE_SELECT_MAX_PIPE        12
+#      define GB_PIPE_SELECT_BAD_PIPES       14
+#      define GB_PIPE_SELECT_CONFIG_PIPES    18
+
+
+/* Specifies the sizes of the various FIFO`s in the sc/rs. */
+#define GB_FIFO_SIZE1                            0x4070
+/* High water mark for SC input fifo */
+#      define GB_FIFO_SIZE1_SC_HIGHWATER_IFIFO_SHIFT 0
+#      define GB_FIFO_SIZE1_SC_HIGHWATER_IFIFO_MASK  0x0000003f
+/* High water mark for SC input fifo (B) */
+#      define GB_FIFO_SIZE1_SC_HIGHWATER_BFIFO_SHIFT 6
+#      define GB_FIFO_SIZE1_SC_HIGHWATER_BFIFO_MASK  0x00000fc0
+/* High water mark for RS colors' fifo */
+#      define GB_FIFO_SIZE1_SC_HIGHWATER_COL_SHIFT   12
+#      define GB_FIFO_SIZE1_SC_HIGHWATER_COL_MASK    0x0003f000
+/* High water mark for RS textures' fifo */
+#      define GB_FIFO_SIZE1_SC_HIGHWATER_TEX_SHIFT   18
+#      define GB_FIFO_SIZE1_SC_HIGHWATER_TEX_MASK    0x00fc0000
+
+/* This table specifies the source location and format for up to 16 texture
+ * addresses (i[0]:i[15]) and four colors (c[0]:c[3])
+ */
+#define RS_IP_0                                  0x4074
+#define RS_IP_1                                  0x4078
+#define RS_IP_2                                  0x407C
+#define RS_IP_3                                  0x4080
+#define RS_IP_4                                  0x4084
+#define RS_IP_5                                  0x4088
+#define RS_IP_6                                  0x408C
+#define RS_IP_7                                  0x4090
+#define RS_IP_8                                  0x4094
+#define RS_IP_9                                  0x4098
+#define RS_IP_10                                 0x409C
+#define RS_IP_11                                 0x40A0
+#define RS_IP_12                                 0x40A4
+#define RS_IP_13                                 0x40A8
+#define RS_IP_14                                 0x40AC
+#define RS_IP_15                                 0x40B0
+#      define RS_IP_TEX_PTR_S_SHIFT 0
+#      define RS_IP_TEX_PTR_S_MASK  0x0000003f
+#      define RS_IP_TEX_PTR_T_SHIFT 6
+#      define RS_IP_TEX_PTR_T_MASK  0x00000fc0
+#      define RS_IP_TEX_PTR_R_SHIFT 12
+#      define RS_IP_TEX_PTR_R_MASK  0x0003f000
+#      define RS_IP_TEX_PTR_Q_SHIFT 18
+#      define RS_IP_TEX_PTR_Q_MASK  0x00fc0000
+#      define RS_IP_COL_PTR_SHIFT   24
+#      define RS_IP_COL_PTR_MASK    0x07000000
+#      define RS_IP_COL_FMT_RGBA    (0 << 27)
+#      define RS_IP_COL_FMT_RGB0    (1 << 27)
+#      define RS_IP_COL_FMT_RGB1    (2 << 27)
+/* gap */
+#      define RS_IP_COL_FMT_000A    (4 << 27)
+#      define RS_IP_COL_FMT_0000    (5 << 27)
+#      define RS_IP_COL_FMT_0001    (6 << 27)
+/* gap */
+#      define RS_IP_COL_FMT_111A    (8 << 27)
+#      define RS_IP_COL_FMT_1110    (9 << 27)
+#      define RS_IP_COL_FMT_1111    (10 << 27)
+/* gap */
+#      define RS_IP_OFFSET_DIS      (0 << 31)
+#      define RS_IP_OFFSET_EN       (1 << 31)
 
 /* gap */
 
@@ -990,16 +1095,19 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
  */
 #define R300_RS_COUNT                      0x4300
 #       define R300_IT_COUNT_SHIFT               0
-#       define R300_IT_COUNT_MASK                (0x7f << 0)
+#       define R300_IT_COUNT_MASK                0x0000007f
 #       define R300_IC_COUNT_SHIFT               7
-#       define R300_IC_COUNT_MASK                (0xf << 0)
+#       define R300_IC_COUNT_MASK                0x00000780
 #       define R300_W_ADDR_SHIFT                 12
-#       define R300_W_ADDR_MASK                  (0x3f << 12)
-#       define R300_HIRES_EN                     (1<<18)
+#       define R300_W_ADDR_MASK                  0x0003f000
+#       define R300_HIRES_DIS                    (0 << 18)
+#       define R300_HIRES_EN                     (1 << 18)
 
-#define R300_RS_INST_COUNT                0x4304
-#       define R300_RS_INST_COUNT_MASK           0xf
+#define R300_RS_INST_COUNT                       0x4304
+#       define R300_RS_INST_COUNT_SHIFT          0
+#       define R300_RS_INST_COUNT_MASK           0x0000000f
 #       define R300_RS_TX_OFFSET_SHIFT           5
+#      define R300_RS_TX_OFFSET_MASK            0x000000e0
 
 /* gap */
 
@@ -1023,14 +1131,46 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #       define R300_RS_INTERP_2_UNKNOWN          0x80
 #define R300_RS_INTERP_3                    0x431C
 #       define R300_RS_INTERP_3_UNKNOWN          0xC0
-#define R300_RS_INTERP_4                    0x4320
-#define R300_RS_INTERP_5                    0x4324
-#define R300_RS_INTERP_6                    0x4328
-#define R300_RS_INTERP_7                    0x432C
 #       define R300_RS_INTERP_SRC_SHIFT          2
 #       define R300_RS_INTERP_SRC_MASK           (7 << 2)
 #       define R300_RS_INTERP_USED               0x00D10000
 
+/*  */
+#define RS_INST_0                                0x4320
+#define RS_INST_1                                0x4324
+#define RS_INST_2                                0x4328
+#define RS_INST_3                                0x432c
+#define RS_INST_4                                0x4330
+#define RS_INST_5                                0x4334
+#define RS_INST_6                                0x4338
+#define RS_INST_7                                0x433c
+#define RS_INST_8                                0x4340
+#define RS_INST_9                                0x4344
+#define RS_INST_10                               0x4348
+#define RS_INST_11                               0x434c
+#define RS_INST_12                               0x4350
+#define RS_INST_13                               0x4354
+#define RS_INST_14                               0x4358
+#define RS_INST_15                               0x435c
+#      define RS_INST_TEX_ID_SHIFT    0
+#      define RS_INST_TEX_ID_MASK     0x0000000f
+#      define RS_INST_TEX_CN_NO_WRITE (0 << 4)
+#      define RS_INST_TEX_CN_WRITE    (1 << 4)
+#      define RS_INST_TEX_ADDR_SHIFT  5
+#      define RS_INST_TEX_ADDR_MASK   0x00000fe0
+#      define RS_INST_COL_ID_SHIFT    12
+#      define RS_INST_COL_ID_MASK     0x0000f000
+#      define RS_INST_COL_CN_NO_WRITE (0 << 16)
+#      define RS_INST_COL_CN_WRITE    (1 << 16)
+#      define RS_INST_COL_CN_FBUFFER  (2 << 16)
+#      define RS_INST_COL_CN_BACKFACE (3 << 16)
+#      define RS_INST_COL_ADDR_SHIFT  18
+#      define RS_INST_COL_ADDR_MASK   0x01fc0000
+#      define RS_INST_TEX_ADJ_REAL    (0 << 25)
+#      define RS_INST_TEX_ADJ_ADJ     (1 << 25)
+#      define RS_INST_W_CB_NO_WRITE   (0 << 26)
+#      define RS_INST_W_CB_WRITE      (1 << 26)
+
 /* These DWORDs control how vertex data is routed into fragment program
  * registers, after interpolators.
  */

diff --git a/src/mesa/drivers/dri/r300/r300_state.c b/src/mesa/drivers/dri/r300/r300_state.c
index 490e286..3410d5f 100644 (file)
--- a/src/mesa/drivers/dri/r300/r300_state.c
+++ b/src/mesa/drivers/dri/r300/r300_state.c
@@ -1892,7 +1892,7 @@ static void r300ResetHwState(r300ContextPtr r300)
 
        r300->hw.gb_enable.cmd[1] = R300_GB_POINT_STUFF_ENABLE
            | R300_GB_LINE_STUFF_ENABLE
-           | R300_GB_TRIANGLE_STUFF_ENABLE /*| R300_GB_UNK31 */ ;
+           | R300_GB_TRIANGLE_STUFF_ENABLE;
 
        r300->hw.gb_misc.cmd[R300_GB_MISC_MSPOS_0] = 0x66666666;
        r300->hw.gb_misc.cmd[R300_GB_MISC_MSPOS_1] = 0x06666666;
@@ -1903,12 +1903,9 @@ static void r300ResetHwState(r300ContextPtr r300)
        switch (r300->radeon.radeonScreen->chip_family) {
        case CHIP_FAMILY_R300:
        case CHIP_FAMILY_R350:
-               r300->hw.gb_misc.cmd[R300_GB_MISC_TILE_CONFIG] |=
-                   R300_GB_TILE_PIPE_COUNT_R300;
-               break;
        case CHIP_FAMILY_RV410:
                r300->hw.gb_misc.cmd[R300_GB_MISC_TILE_CONFIG] |=
-                   R300_GB_TILE_PIPE_COUNT_RV410;
+                   R300_GB_TILE_PIPE_COUNT_R300;
                break;
        case CHIP_FAMILY_R420:
                r300->hw.gb_misc.cmd[R300_GB_MISC_TILE_CONFIG] |=
@@ -1916,7 +1913,7 @@ static void r300ResetHwState(r300ContextPtr r300)
                break;
        default:
                r300->hw.gb_misc.cmd[R300_GB_MISC_TILE_CONFIG] |=
-                   R300_GB_TILE_PIPE_COUNT_RV300;
+                   R300_GB_TILE_DISABLE; /* TODO: This disables tiling totally. I guess it happened accidentially. */
                break;
        }
 
@@ -1924,7 +1921,7 @@ static void r300ResetHwState(r300ContextPtr r300)
        r300->hw.gb_misc.cmd[R300_GB_MISC_SELECT] = R300_GB_FOG_SELECT_1_1_W;
 
        /* XXX: Enable anti-aliasing? */
-       r300->hw.gb_misc.cmd[R300_GB_MISC_AA_CONFIG] = R300_AA_DISABLE;
+       r300->hw.gb_misc.cmd[R300_GB_MISC_AA_CONFIG] = GB_AA_CONFIG_AA_DISABLE;
 
        r300->hw.ga_point_s0.cmd[1] = r300PackFloat32(0.0);
        r300->hw.ga_point_s0.cmd[2] = r300PackFloat32(0.0);