SMDK5250: Add ethernet support
authorChander Kashyap <chander.kashyap@linaro.org>
Thu, 9 Feb 2012 01:26:19 +0000 (01:26 +0000)
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>
Sun, 12 Feb 2012 09:11:30 +0000 (10:11 +0100)
This patch enable support for SMC911X based ethernet device.

Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
board/samsung/smdk5250/smdk5250.c
include/configs/smdk5250.h

index 04c863a..928c08f 100644 (file)
 DECLARE_GLOBAL_DATA_PTR;
 struct exynos5_gpio_part1 *gpio1;
 
+#ifdef CONFIG_SMC911X
+static void smc9115_pre_init(void)
+{
+       u32 smc_bw_conf, smc_bc_conf;
+       int i;
+
+       /*
+        * SROM:CS1 and EBI
+        *
+        * GPY0[0]      SROM_CSn[0]
+        * GPY0[1]      SROM_CSn[1](2)
+        * GPY0[2]      SROM_CSn[2]
+        * GPY0[3]      SROM_CSn[3]
+        * GPY0[4]      EBI_OEn(2)
+        * GPY0[5]      EBI_EEn(2)
+        *
+        * GPY1[0]      EBI_BEn[0](2)
+        * GPY1[1]      EBI_BEn[1](2)
+        * GPY1[2]      SROM_WAIT(2)
+        * GPY1[3]      EBI_DATA_RDn(2)
+        */
+       s5p_gpio_cfg_pin(&gpio1->y0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
+       s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2));
+       s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2));
+
+       for (i = 0; i < 4; i++)
+               s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2));
+
+       /*
+        * EBI: 8 Addrss Lines
+        *
+        * GPY3[0]      EBI_ADDR[0](2)
+        * GPY3[1]      EBI_ADDR[1](2)
+        * GPY3[2]      EBI_ADDR[2](2)
+        * GPY3[3]      EBI_ADDR[3](2)
+        * GPY3[4]      EBI_ADDR[4](2)
+        * GPY3[5]      EBI_ADDR[5](2)
+        * GPY3[6]      EBI_ADDR[6](2)
+        * GPY3[7]      EBI_ADDR[7](2)
+        *
+        * EBI: 16 Data Lines
+        *
+        * GPY5[0]      EBI_DATA[0](2)
+        * GPY5[1]      EBI_DATA[1](2)
+        * GPY5[2]      EBI_DATA[2](2)
+        * GPY5[3]      EBI_DATA[3](2)
+        * GPY5[4]      EBI_DATA[4](2)
+        * GPY5[5]      EBI_DATA[5](2)
+        * GPY5[6]      EBI_DATA[6](2)
+        * GPY5[7]      EBI_DATA[7](2)
+        *
+        * GPY6[0]      EBI_DATA[8](2)
+        * GPY6[1]      EBI_DATA[9](2)
+        * GPY6[2]      EBI_DATA[10](2)
+        * GPY6[3]      EBI_DATA[11](2)
+        * GPY6[4]      EBI_DATA[12](2)
+        * GPY6[5]      EBI_DATA[13](2)
+        * GPY6[6]      EBI_DATA[14](2)
+        * GPY6[7]      EBI_DATA[15](2)
+        */
+       for (i = 0; i < 8; i++) {
+               s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2));
+               s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP);
+
+               s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2));
+               s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP);
+
+               s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2));
+               s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP);
+       }
+
+       /* Ethernet needs data bus width of 16 bits */
+       smc_bw_conf = SROMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK)
+                       | SROMC_BYTE_ENABLE(CONFIG_ENV_SROM_BANK);
+
+       smc_bc_conf = SROMC_BC_TACS(0x01) | SROMC_BC_TCOS(0x01)
+                       | SROMC_BC_TACC(0x06) | SROMC_BC_TCOH(0x01)
+                       | SROMC_BC_TAH(0x0C)  | SROMC_BC_TACP(0x09)
+                       | SROMC_BC_PMC(0x01);
+
+       /* Select and configure the SROMC bank */
+       s5p_config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf, smc_bc_conf);
+}
+#endif
+
 int board_init(void)
 {
        gpio1 = (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
@@ -80,6 +165,15 @@ void dram_init_banksize(void)
                                                        PHYS_SDRAM_8_SIZE);
 }
 
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_SMC911X
+       smc9115_pre_init();
+       return smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+       return 0;
+}
+
 #ifdef CONFIG_DISPLAY_BOARDINFO
 int checkboard(void)
 {
index f54d7ac..9659f9e 100644 (file)
@@ -96,8 +96,7 @@
 #define CONFIG_CMD_MMC
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
+#define CONFIG_CMD_NET
 
 #define CONFIG_BOOTDELAY               3
 #define CONFIG_ZERO_BOOTDELAY_CHECK
 
 #define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_LOAD_ADDR - 0x1000000)
 
+/* Ethernet Controllor Driver */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_BASE            0x5000000
+#define CONFIG_SMC911X_16_BIT
+#define CONFIG_ENV_SROM_BANK           1
+#endif /*CONFIG_CMD_NET*/
+
 /* Enable devicetree support */
 #define CONFIG_OF_LIBFDT