"ERROR: Cannot umount" in nfs command, try longer timeout such as
10000.
+config SYS_DISABLE_AUTOLOAD
+ bool "Disable automatically loading files over the network"
+ depends on CMD_BOOTP || CMD_DHCP || CMD_NFS || CMD_RARP
+ help
+ Typically, commands such as "dhcp" will attempt to automatically
+ load a file from the network, once the initial network configuration
+ is complete. Enable this option to disable this behavior and instead
+ require files to be loaded over the network by subsequent commands.
+
config CMD_MII
bool "mii"
imply CMD_MDIO
CONFIG_CMD_NAND=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_BMP=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_MAY_FAIL=y
# CONFIG_CMD_NFS is not set
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_PXE=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND_TRIMFFS=y
CONFIG_CMD_DHCP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_BOOTCOUNT=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_MAY_FAIL=y
# CONFIG_CMD_NFS is not set
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_BOOTCOUNT=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_MAY_FAIL=y
# CONFIG_CMD_NFS is not set
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_BOOTCOUNT=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_MAY_FAIL=y
# CONFIG_CMD_NFS is not set
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_BOOTCOUNT=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_MAY_FAIL=y
# CONFIG_CMD_NFS is not set
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_MAY_FAIL=y
# CONFIG_CMD_NFS is not set
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_MAY_FAIL=y
# CONFIG_CMD_NFS is not set
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
# CONFIG_CMD_MDIO is not set
CONFIG_CMD_PING=y
CONFIG_CMD_SATA=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_DNS2=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=nand"
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_NFS is not set
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_MTDPARTS=y
CONFIG_OF_CONTROL=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_RARP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
# CONFIG_CMD_MDIO is not set
CONFIG_CMD_PING=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_SATA=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_TFTPSRV=y
CONFIG_CMD_RARP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CDP=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_TFTPSRV=y
CONFIG_CMD_RARP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CDP=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_NAND=y
CONFIG_CMD_NAND_LOCK_UNLOCK=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_UUID=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
CONFIG_CMD_NAND=y
CONFIG_CMD_NAND_LOCK_UNLOCK=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_UUID=y
CONFIG_CMD_MTDPARTS=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_NAND=y
CONFIG_CMD_NAND_LOCK_UNLOCK=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_UUID=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
CONFIG_CMD_NAND=y
CONFIG_CMD_NAND_LOCK_UNLOCK=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_UUID=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_TFTPPUT=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND_TRIMFFS=y
CONFIG_CMD_DHCP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_FAT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_REMOTEPROC=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_REMOTEPROC=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_REMOTEPROC=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_REMOTEPROC=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EFIDEBUG=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EFIDEBUG=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EFIDEBUG=y
MEM_LAYOUT_ENV_SETTINGS \
BOOTENV \
GUARDIAN_DEFAULT_PROD_ENV \
- "autoload=no\0" \
"backlight_brightness=50\0" \
"bootubivol=rootfs\0" \
"distro_bootcmd=" \
#define CONFIG_SYS_SDRAM_SIZE 0x40000000
#define CONFIG_EXTRA_ENV_SETTINGS \
- "autoload=no\0" \
"pxefile_addr_r=0x2000000\0" \
"scriptaddr=0x3000000\0" \
"kernel_addr_r=0x2000000\0" \
/* Extra env settings (including the target-defined ones if any) */
#define CONFIG_EXTRA_ENV_SETTINGS \
BK4_EXTRA_ENV_SETTINGS \
- "autoload=no\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"blimg_file=u-boot.vyb\0" \
#define CONFIG_EXTRA_ENV_SETTINGS \
BUR_COMMON_ENV \
"verify=no\0" \
-"autoload=0\0" \
"scraddr=" __stringify(LOAD_OFFSET(0000000)) "\0" \
"cfgaddr=" __stringify(LOAD_OFFSET(0020000)) "\0" \
"dtbaddr=" __stringify(LOAD_OFFSET(0040000)) "\0" \
#define CONFIG_EXTRA_ENV_SETTINGS \
BUR_COMMON_ENV \
-"autoload=0\0" \
"cfgaddr=0x106F0000\0" \
"scraddr=0x10700000\0" \
"loadaddr=0x10800000\0" \
/* Default environment */
#define CONFIG_EXTRA_ENV_SETTINGS \
BUR_COMMON_ENV \
-"autoload=0\0" \
"scradr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"cfgscr=mw ${dtbaddr} 0;" \
" sf probe && sf read ${scradr} 0xC0000 0x10000 && source ${scradr};" \
/* Default environment */
#define CONFIG_EXTRA_ENV_SETTINGS \
BUR_COMMON_ENV \
-"autoload=0\0" \
"scradr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"bootaddr=0x80001100\0" \
"bootdev=cpsw(0,0)\0" \
#define CONFIG_SYS_I2C_PCA953X_ADDR 0x20
#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} }
-#undef CONFIG_SYS_AUTOLOAD
#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_SYS_AUTOLOAD "no"
-
#define CONFIG_EXTRA_ENV_SETTINGS \
- "autoload=off\0" \
"script=boot.scr\0" \
"loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0" \
"loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0" \
"stdout=serial,vidconsole\0" \
"stderr=serial,vidconsole\0" \
"panel=HDMI\0" \
- "autoload=no\0" \
"uImage=uImage-cm-fx6\0" \
"zImage=zImage-cm-fx6\0" \
"kernel=uImage-cm-fx6\0" \
MMCARGS \
NANDARGS
-#define CONFIG_SYS_AUTOLOAD "no"
-
/* Serial console configuration */
/* NS16550 Configuration */
"loadaddr=0x80200000\0" \
"fdtaddr=0x81200000\0" \
"bootm_size=0x8000000\0" \
- "autoload=no\0" \
"console=ttyO0,115200n8\0" \
"fdtfile=am437x-sb-som-t43.dtb\0" \
"kernel=zImage-cm-t43\0" \
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
- "autoload=no\0" \
"ethaddr=00:01:90:00:C0:81\0" \
"dtbaddr=0x81000000\0" \
"nfsroot=/opt/projects/images/vladimir/oe/devkit3250/rootfs\0" \
"stdout=serial\0" \
"stderr=serial\0" \
"loadaddr=0x800000\0" \
- "autoload=no\0" \
"console=ttyS0,115200\0" \
"mtdparts="CONFIG_MTDPARTS_DEFAULT \
"optargs=\0" \
#define I2C_DELAY udelay(100)
#define I2C_READ at91_get_pio_value(AT91_PIO_PORTA, 23)
-/* DHCP/BOOTP options */
-#ifdef CONFIG_CMD_DHCP
-#define CONFIG_SYS_AUTOLOAD "n"
-#endif
-
/* File systems */
/* Boot command */
#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
-#undef CONFIG_SYS_AUTOLOAD
#undef CONFIG_EXTRA_ENV_SETTINGS
/*
"stderr=serial\0" \
"bootfile=uImage\0" \
"loadaddr=0x800000\0" \
- "autoload=no\0" \
"netconsole=" \
"set stdin $stdin,nc; " \
"set stdout $stdout,nc; " \
"0x500000@0xc0000(uimage),"\
"0x1a40000@0x5c0000(rootfs)\0" \
"mtdids=nand0=orion_nand\0"\
- "autostart=no\0"\
- "autoload=no\0"
+ "autostart=no\0"
/*
* Ethernet Driver configuration
/** Extra environment settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=20080000\0" \
- "ethrotate=yes\0" \
- "autoload=0\0"
+ "ethrotate=yes\0"
#define CONFIG_SYS_MMC_MAX_BLK_COUNT 8192
#include <config_distro_bootcmd.h>
/* Extra environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
- "autoload=0\0" \
"loadaddr=0x20080000\0" \
"kernel_addr_r=0x02000000\0" \
"ramdisk_addr_r=0x03000000\0" \
"nfsroot=${nfsrootpath} " \
"ip=${ipaddr}:${tftpserver}:${gatewayip}:${netmask}::eth0:off\0" \
"nfsrootpath=/opt/nfs-exports/omap\0" \
- "autoload=no\0" \
"fdtimage=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
"loadfdt=mmc rescan; " \
"load mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \
/* LCD */
#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
-#define CONFIG_SYS_AUTOLOAD "no"
#define CONFIG_ROOTPATH "/tftpboot/opos6ul-root"
#endif /* __OPOS6ULDEV_CONFIG_H */
/* Extra env settings (including the target-defined ones if any) */
#define CONFIG_EXTRA_ENV_SETTINGS \
PCM052_EXTRA_ENV_SETTINGS \
- "autoload=no\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"blimg_file=u-boot.vyb\0" \
#define CONFIG_ROOTPATH "/opt/eldk"
-#define CONFIG_SYS_AUTOLOAD "yes"
-
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
/* misc settings */
-/* setting board specific options */
-#define CONFIG_SYS_AUTOLOAD "yes"
-
/*
* SDRAM: 1 bank, 64 MB, base address 0x20000000
* Already initialized before u-boot gets started.
/* Ethernet need */
#ifdef CONFIG_DWC_ETH_QOS
#define CONFIG_SERVERIP 192.168.1.1
-#define CONFIG_SYS_AUTOLOAD "no"
#endif
/*****************************************************************************/
#ifdef CONFIG_SERVERIP
"serverip=" __stringify(CONFIG_SERVERIP) "\0"
#endif
-#ifdef CONFIG_SYS_AUTOLOAD
- "autoload=" CONFIG_SYS_AUTOLOAD "\0"
+#ifdef CONFIG_SYS_DISABLE_AUTOLOAD
+ "autoload=0\0"
#endif
#ifdef CONFIG_PREBOOT
"preboot=" CONFIG_PREBOOT "\0"