[SCSI] scsi: fix lpfc build when wmb() is defined as mb()

On architectures where wmb() is defined as mb(), a build error
happens since there is also a variable named 'mb' in lpfc_sli.c's
lpfc_sli_issue_mbox_s3() function.  Rename the variable to 'mbx'
to prevent the build error.

drivers/scsi/lpfc/lpfc_sli.c: error: called object 'mb' is not a function

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 55b6fc8..74b67d9 100644 (file)
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -6644,7 +6644,7 @@ static int
 lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
                       uint32_t flag)
 {
-       MAILBOX_t *mb;
+       MAILBOX_t *mbx;
        struct lpfc_sli *psli = &phba->sli;
        uint32_t status, evtctr;
        uint32_t ha_copy, hc_copy;
@@ -6698,7 +6698,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
 
        psli = &phba->sli;
 
-       mb = &pmbox->u.mb;
+       mbx = &pmbox->u.mb;
        status = MBX_SUCCESS;
 
        if (phba->link_state == LPFC_HBA_ERROR) {
@@ -6713,7 +6713,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
                goto out_not_finished;
        }
 
-       if (mb->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT) {
+       if (mbx->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT) {
                if (lpfc_readl(phba->HCregaddr, &hc_copy) ||
                        !(hc_copy & HC_MBINT_ENA)) {
                        spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
@@ -6767,7 +6767,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
                                "(%d):0308 Mbox cmd issue - BUSY Data: "
                                "x%x x%x x%x x%x\n",
                                pmbox->vport ? pmbox->vport->vpi : 0xffffff,
-                               mb->mbxCommand, phba->pport->port_state,
+                               mbx->mbxCommand, phba->pport->port_state,
                                psli->sli_flag, flag);
 
                psli->slistat.mbox_busy++;
@@ -6777,15 +6777,15 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
                        lpfc_debugfs_disc_trc(pmbox->vport,
                                LPFC_DISC_TRC_MBOX_VPORT,
                                "MBOX Bsy vport:  cmd:x%x mb:x%x x%x",
-                               (uint32_t)mb->mbxCommand,
-                               mb->un.varWords[0], mb->un.varWords[1]);
+                               (uint32_t)mbx->mbxCommand,
+                               mbx->un.varWords[0], mbx->un.varWords[1]);
                }
                else {
                        lpfc_debugfs_disc_trc(phba->pport,
                                LPFC_DISC_TRC_MBOX,
                                "MBOX Bsy:        cmd:x%x mb:x%x x%x",
-                               (uint32_t)mb->mbxCommand,
-                               mb->un.varWords[0], mb->un.varWords[1]);
+                               (uint32_t)mbx->mbxCommand,
+                               mbx->un.varWords[0], mbx->un.varWords[1]);
                }
 
                return MBX_BUSY;
@@ -6796,7 +6796,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
        /* If we are not polling, we MUST be in SLI2 mode */
        if (flag != MBX_POLL) {
                if (!(psli->sli_flag & LPFC_SLI_ACTIVE) &&
-                   (mb->mbxCommand != MBX_KILL_BOARD)) {
+                   (mbx->mbxCommand != MBX_KILL_BOARD)) {
                        psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
                        spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
                        /* Mbox command <mbxCommand> cannot issue */
@@ -6818,23 +6818,23 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
                        "(%d):0309 Mailbox cmd x%x issue Data: x%x x%x "
                        "x%x\n",
                        pmbox->vport ? pmbox->vport->vpi : 0,
-                       mb->mbxCommand, phba->pport->port_state,
+                       mbx->mbxCommand, phba->pport->port_state,
                        psli->sli_flag, flag);
 
-       if (mb->mbxCommand != MBX_HEARTBEAT) {
+       if (mbx->mbxCommand != MBX_HEARTBEAT) {
                if (pmbox->vport) {
                        lpfc_debugfs_disc_trc(pmbox->vport,
                                LPFC_DISC_TRC_MBOX_VPORT,
                                "MBOX Send vport: cmd:x%x mb:x%x x%x",
-                               (uint32_t)mb->mbxCommand,
-                               mb->un.varWords[0], mb->un.varWords[1]);
+                               (uint32_t)mbx->mbxCommand,
+                               mbx->un.varWords[0], mbx->un.varWords[1]);
                }
                else {
                        lpfc_debugfs_disc_trc(phba->pport,
                                LPFC_DISC_TRC_MBOX,
                                "MBOX Send:       cmd:x%x mb:x%x x%x",
-                               (uint32_t)mb->mbxCommand,
-                               mb->un.varWords[0], mb->un.varWords[1]);
+                               (uint32_t)mbx->mbxCommand,
+                               mbx->un.varWords[0], mbx->un.varWords[1]);
                }
        }
 
@@ -6842,12 +6842,12 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
        evtctr = psli->slistat.mbox_event;
 
        /* next set own bit for the adapter and copy over command word */
-       mb->mbxOwner = OWN_CHIP;
+       mbx->mbxOwner = OWN_CHIP;
 
        if (psli->sli_flag & LPFC_SLI_ACTIVE) {
                /* Populate mbox extension offset word. */
                if (pmbox->in_ext_byte_len || pmbox->out_ext_byte_len) {
-                       *(((uint32_t *)mb) + pmbox->mbox_offset_word)
+                       *(((uint32_t *)mbx) + pmbox->mbox_offset_word)
                                = (uint8_t *)phba->mbox_ext
                                  - (uint8_t *)phba->mbox;
                }
@@ -6859,11 +6859,11 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
                                pmbox->in_ext_byte_len);
                }
                /* Copy command data to host SLIM area */
-               lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE);
+               lpfc_sli_pcimem_bcopy(mbx, phba->mbox, MAILBOX_CMD_SIZE);
        } else {
                /* Populate mbox extension offset word. */
                if (pmbox->in_ext_byte_len || pmbox->out_ext_byte_len)
-                       *(((uint32_t *)mb) + pmbox->mbox_offset_word)
+                       *(((uint32_t *)mbx) + pmbox->mbox_offset_word)
                                = MAILBOX_HBA_EXT_OFFSET;
 
                /* Copy the mailbox extension data */
@@ -6873,24 +6873,24 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
                                pmbox->context2, pmbox->in_ext_byte_len);
 
                }
-               if (mb->mbxCommand == MBX_CONFIG_PORT) {
+               if (mbx->mbxCommand == MBX_CONFIG_PORT) {
                        /* copy command data into host mbox for cmpl */
-                       lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE);
+                       lpfc_sli_pcimem_bcopy(mbx, phba->mbox, MAILBOX_CMD_SIZE);
                }
 
                /* First copy mbox command data to HBA SLIM, skip past first
                   word */
                to_slim = phba->MBslimaddr + sizeof (uint32_t);
-               lpfc_memcpy_to_slim(to_slim, &mb->un.varWords[0],
+               lpfc_memcpy_to_slim(to_slim, &mbx->un.varWords[0],
                            MAILBOX_CMD_SIZE - sizeof (uint32_t));
 
                /* Next copy over first word, with mbxOwner set */
-               ldata = *((uint32_t *)mb);
+               ldata = *((uint32_t *)mbx);
                to_slim = phba->MBslimaddr;
                writel(ldata, to_slim);
                readl(to_slim); /* flush */
 
-               if (mb->mbxCommand == MBX_CONFIG_PORT) {
+               if (mbx->mbxCommand == MBX_CONFIG_PORT) {
                        /* switch over to host mailbox */
                        psli->sli_flag |= LPFC_SLI_ACTIVE;
                }
@@ -6965,7 +6965,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
                                /* First copy command data */
                                word0 = *((uint32_t *)phba->mbox);
                                word0 = le32_to_cpu(word0);
-                               if (mb->mbxCommand == MBX_CONFIG_PORT) {
+                               if (mbx->mbxCommand == MBX_CONFIG_PORT) {
                                        MAILBOX_t *slimmb;
                                        uint32_t slimword0;
                                        /* Check real SLIM for any errors */
@@ -6992,7 +6992,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
 
                if (psli->sli_flag & LPFC_SLI_ACTIVE) {
                        /* copy results back to user */
-                       lpfc_sli_pcimem_bcopy(phba->mbox, mb, MAILBOX_CMD_SIZE);
+                       lpfc_sli_pcimem_bcopy(phba->mbox, mbx, MAILBOX_CMD_SIZE);
                        /* Copy the mailbox extension data */
                        if (pmbox->out_ext_byte_len && pmbox->context2) {
                                lpfc_sli_pcimem_bcopy(phba->mbox_ext,
@@ -7001,7 +7001,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
                        }
                } else {
                        /* First copy command data */
-                       lpfc_memcpy_from_slim(mb, phba->MBslimaddr,
+                       lpfc_memcpy_from_slim(mbx, phba->MBslimaddr,
                                                        MAILBOX_CMD_SIZE);
                        /* Copy the mailbox extension data */
                        if (pmbox->out_ext_byte_len && pmbox->context2) {
@@ -7016,7 +7016,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
                readl(phba->HAregaddr); /* flush */
 
                psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
-               status = mb->mbxStatus;
+               status = mbx->mbxStatus;
        }
 
        spin_unlock_irqrestore(&phba->hbalock, drvr_flag);