mtd: nand: omap: make am33xx/elm.c as common driver for all OMAPx and AMxxxx platforms

ELM hardware engine which is used for ECC error detection, is present on all
latest OMAP SoC (like OMAP4xxx, OMAP5xxx, DRA7xxx, AM33xx, AM43xx). Thus ELM
driver should be moved to common drivers/mtd/nand/ folder so that all SoC
having on-chip ELM hardware engine can re-use it.
This patch has following changes:
- mv arch/arm/include/asm/arch-am33xx/elm.h arch/arm/include/asm/omap_elm.h
- mv arch/arm/cpu/armv7/am33xx/elm.c drivers/mtd/nand/omap_elm.c
- update Makefiles
- update #include <asm/elm.h>
- add CONFIG_NAND_OMAP_ELM to compile driver/mtd/nand/omap_elm.c
	and include in all board configs using AM33xx SoC platform.

Signed-off-by: Pekon Gupta <pekon@ti.com>

diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile
index 966fcab..5566310 100644 (file)
--- a/arch/arm/cpu/armv7/am33xx/Makefile
+++ b/arch/arm/cpu/armv7/am33xx/Makefile
@@ -19,4 +19,3 @@ obj-y += ddr.o
 obj-y  += emif4.o
 obj-y  += board.o
 obj-y  += mux.o
-obj-$(CONFIG_NAND_OMAP_GPMC)   += elm.o

diff --git a/arch/arm/include/asm/arch-am33xx/elm.h b/arch/arm/include/asm/omap_elm.h
similarity index 100%
rename from arch/arm/include/asm/arch-am33xx/elm.h
rename to arch/arm/include/asm/omap_elm.h

diff --git a/doc/README.nand b/doc/README.nand
index 3a507b6..ce7ea5e 100644 (file)
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -179,6 +179,25 @@ Configuration Options:
       Please convert your driver even if you don't need the extra
       flexibility, so that one day we can eliminate the old mechanism.
 
+
+Platform specific options
+=========================
+   CONFIG_NAND_OMAP_GPMC
+       Enables omap_gpmc.c driver for OMAPx and AMxxxx platforms.
+       GPMC controller is used for parallel NAND flash devices, and can
+       do ECC calculation (not ECC error detection) for HAM1, BCH4, BCH8
+       and BCH16 ECC algorithms.
+
+   CONFIG_NAND_OMAP_ELM
+       Enables omap_elm.c driver for OMAPx and AMxxxx platforms.
+       ELM controller is used for ECC error detection (not ECC calculation)
+       of BCH4, BCH8 and BCH16 ECC algorithms.
+       Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine,
+       thus such SoC platforms need to depend on software library for ECC error
+       detection. However ECC calculation on such plaforms would still be
+       done by GPMC controller.
+
+
 NOTE:
 =====
 

diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index eb1eafa..e145cd1 100644 (file)
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o
 obj-$(CONFIG_NAND_SPEAR) += spr_nand.o
 obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
 obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
+obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o
 obj-$(CONFIG_NAND_PLAT) += nand_plat.o
 obj-$(CONFIG_NAND_DOCG4) += docg4.o
 

diff --git a/arch/arm/cpu/armv7/am33xx/elm.c b/drivers/mtd/nand/omap_elm.c
similarity index 97%
rename from arch/arm/cpu/armv7/am33xx/elm.c
rename to drivers/mtd/nand/omap_elm.c
index 8f1d6af..2aa7807 100644 (file)
--- a/arch/arm/cpu/armv7/am33xx/elm.c
+++ b/drivers/mtd/nand/omap_elm.c
@@ -18,7 +18,7 @@
 #include <asm/errno.h>
 #include <asm/arch/cpu.h>
 #include <asm/omap_gpmc.h>
-#include <asm/arch/elm.h>
+#include <asm/omap_elm.h>
 
 #define ELM_DEFAULT_POLY (0)
 
@@ -127,7 +127,7 @@ int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count,
 
        for (i = 0; i < *error_count; i++) {
                error_locations[i] =
-                       readl(&elm_cfg->error_location[poly].error_location_x[i]);
+                    readl(&elm_cfg->error_location[poly].error_location_x[i]);
        }
 
        return 0;
@@ -175,7 +175,7 @@ void elm_reset(void)
 {
        /* initiate reset */
        writel((readl(&elm_cfg->sysconfig) | ELM_SYSCONFIG_SOFTRESET),
-                               &elm_cfg->sysconfig);
+                       &elm_cfg->sysconfig);
 
        /* wait for reset complete and normal operation */
        while ((readl(&elm_cfg->sysstatus) & ELM_SYSSTATUS_RESETDONE) !=

diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index ec1787f..c828859 100644 (file)
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -16,7 +16,7 @@
 #include <linux/compiler.h>
 #include <nand.h>
 #ifdef CONFIG_AM33XX
-#include <asm/arch/elm.h>
+#include <asm/omap_elm.h>
 #endif
 
 static uint8_t cs;

diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index c2ba7e3..73d8b4d 100644 (file)
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -221,6 +221,8 @@
 #define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/am33xx/u-boot-spl.lds"
 
 #ifdef CONFIG_NAND
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
                                         CONFIG_SYS_NAND_PAGE_SIZE)

diff --git a/include/configs/am335x_igep0033.h b/include/configs/am335x_igep0033.h
index 2c69d4e..88ced73 100644 (file)
--- a/include/configs/am335x_igep0033.h
+++ b/include/configs/am335x_igep0033.h
@@ -187,6 +187,7 @@
 /* NAND support */
 #define CONFIG_NAND
 #define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_ELM
 #define GPMC_NAND_ECC_LP_x16_LAYOUT    1
 #define CONFIG_SYS_NAND_BASE           (0x08000000)    /* phys address CS0 */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1

diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 9eb0a04..f3b4197 100644 (file)
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -431,6 +431,7 @@
                "\0"
 
 #define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_ELM
 #define GPMC_NAND_ECC_LP_x16_LAYOUT    1
 #define CONFIG_SYS_NAND_BASE           (0x08000000)    /* physical address */
                                                        /* to access nand at */