net: phy: meson-gxl: reuse functionality of the SMSC PHY driver

The Amlogic Meson internal PHY's have the same register layout as
certain SMSC PHY's (also for non-c22-standard registers). This seems
to be more than just coincidence. Apparently they also need the same
workaround for EDPD mode (energy detect power down). Therefore let's
reuse SMSC PHY driver functionality in the meson-gxl PHY driver.

Tested with a G12A internal PHY. I don't have GXL test hw,
therefore I replace only the callbacks that are identical in
the SMSC PHY driver.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 5487455..6b9525d 100644 (file)
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -70,6 +70,7 @@ config AMD_PHY
 config MESON_GXL_PHY
        tristate "Amlogic Meson GXL Internal PHY"
        depends on ARCH_MESON || COMPILE_TEST
+       select SMSC_PHY
        help
          Currently has a driver for the Amlogic Meson GXL Internal PHY
 

diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
index a6015cd..3dea7c7 100644 (file)
--- a/drivers/net/phy/meson-gxl.c
+++ b/drivers/net/phy/meson-gxl.c
@@ -13,6 +13,7 @@
 #include <linux/phy.h>
 #include <linux/netdevice.h>
 #include <linux/bitfield.h>
+#include <linux/smscphy.h>
 
 #define TSTCNTL                20
 #define  TSTCNTL_READ          BIT(15)
@@ -23,18 +24,6 @@
 #define  TSTCNTL_WRITE_ADDRESS GENMASK(4, 0)
 #define TSTREAD1       21
 #define TSTWRITE       23
-#define INTSRC_FLAG    29
-#define  INTSRC_ANEG_PR                BIT(1)
-#define  INTSRC_PARALLEL_FAULT BIT(2)
-#define  INTSRC_ANEG_LP_ACK    BIT(3)
-#define  INTSRC_LINK_DOWN      BIT(4)
-#define  INTSRC_REMOTE_FAULT   BIT(5)
-#define  INTSRC_ANEG_COMPLETE  BIT(6)
-#define  INTSRC_ENERGY_DETECT  BIT(7)
-#define INTSRC_MASK    30
-
-#define INT_SOURCES (INTSRC_LINK_DOWN | INTSRC_ANEG_COMPLETE | \
-                    INTSRC_ENERGY_DETECT)
 
 #define BANK_ANALOG_DSP                0
 #define BANK_WOL               1
@@ -195,59 +184,6 @@ read_status_continue:
        return genphy_read_status(phydev);
 }
 
-static int meson_gxl_ack_interrupt(struct phy_device *phydev)
-{
-       int ret = phy_read(phydev, INTSRC_FLAG);
-
-       return ret < 0 ? ret : 0;
-}
-
-static int meson_gxl_config_intr(struct phy_device *phydev)
-{
-       int ret;
-
-       if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
-               /* Ack any pending IRQ */
-               ret = meson_gxl_ack_interrupt(phydev);
-               if (ret)
-                       return ret;
-
-               ret = phy_write(phydev, INTSRC_MASK, INT_SOURCES);
-       } else {
-               ret = phy_write(phydev, INTSRC_MASK, 0);
-
-               /* Ack any pending IRQ */
-               ret = meson_gxl_ack_interrupt(phydev);
-       }
-
-       return ret;
-}
-
-static irqreturn_t meson_gxl_handle_interrupt(struct phy_device *phydev)
-{
-       int irq_status;
-
-       irq_status = phy_read(phydev, INTSRC_FLAG);
-       if (irq_status < 0) {
-               phy_error(phydev);
-               return IRQ_NONE;
-       }
-
-       irq_status &= INT_SOURCES;
-
-       if (irq_status == 0)
-               return IRQ_NONE;
-
-       /* Aneg-complete interrupt is used for link-up detection */
-       if (phydev->autoneg == AUTONEG_ENABLE &&
-           irq_status == INTSRC_ENERGY_DETECT)
-               return IRQ_HANDLED;
-
-       phy_trigger_machine(phydev);
-
-       return IRQ_HANDLED;
-}
-
 static struct phy_driver meson_gxl_phy[] = {
        {
                PHY_ID_MATCH_EXACT(0x01814400),
@@ -257,8 +193,8 @@ static struct phy_driver meson_gxl_phy[] = {
                .soft_reset     = genphy_soft_reset,
                .config_init    = meson_gxl_config_init,
                .read_status    = meson_gxl_read_status,
-               .config_intr    = meson_gxl_config_intr,
-               .handle_interrupt = meson_gxl_handle_interrupt,
+               .config_intr    = smsc_phy_config_intr,
+               .handle_interrupt = smsc_phy_handle_interrupt,
                .suspend        = genphy_suspend,
                .resume         = genphy_resume,
                .read_mmd       = genphy_read_mmd_unsupported,
@@ -268,9 +204,12 @@ static struct phy_driver meson_gxl_phy[] = {
                .name           = "Meson G12A Internal PHY",
                /* PHY_BASIC_FEATURES */
                .flags          = PHY_IS_INTERNAL,
+               .probe          = smsc_phy_probe,
+               .config_init    = smsc_phy_config_init,
                .soft_reset     = genphy_soft_reset,
-               .config_intr    = meson_gxl_config_intr,
-               .handle_interrupt = meson_gxl_handle_interrupt,
+               .read_status    = lan87xx_read_status,
+               .config_intr    = smsc_phy_config_intr,
+               .handle_interrupt = smsc_phy_handle_interrupt,
                .suspend        = genphy_suspend,
                .resume         = genphy_resume,
                .read_mmd       = genphy_read_mmd_unsupported,