[PARISC] Beautify parisc vmlinux.lds.S

Introduce a consistent layout of vmlinux.
The same layout has been introduced for most
architectures.

And the same time move a few label definitions inside
the curly brackets so they are assigned the correct
starting address. Before a ld inserted alignment
would have casued the label to pint before the actual
start of the section.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>

diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index ee7a16e..d6951bb 100644 (file)
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -46,168 +46,219 @@ jiffies = jiffies_64;
 #endif
 SECTIONS
 {
+       . = KERNEL_BINARY_TEXT_START;
 
-  . = KERNEL_BINARY_TEXT_START;
-
-  _text = .;                   /* Text and read-only data */
-  .text ALIGN(16) : {
-       TEXT_TEXT
-       SCHED_TEXT
-       LOCK_TEXT
-       *(.text.do_softirq)
-       *(.text.sys_exit)
-       *(.text.do_sigaltstack)
-       *(.text.do_fork)
-       *(.text.*)
-       *(.fixup)
-       *(.lock.text)           /* out-of-line lock text */
-       *(.gnu.warning)
+       _text = .;              /* Text and read-only data */
+       .text ALIGN(16) : {
+               TEXT_TEXT
+               SCHED_TEXT
+               LOCK_TEXT
+               *(.text.do_softirq)
+               *(.text.sys_exit)
+               *(.text.do_sigaltstack)
+               *(.text.do_fork)
+               *(.text.*)
+               *(.fixup)
+               *(.lock.text)           /* out-of-line lock text */
+               *(.gnu.warning)
        } = 0
+       /* End of text section */
+       _etext = .;
 
-  _etext = .;                  /* End of text section */
+       RODATA
+       BUG_TABLE
 
-  RODATA
-
-  BUG_TABLE
-
-  /* writeable */
-  . = ALIGN(ASM_PAGE_SIZE);    /* Make sure this is page aligned so
-                                  that we can properly leave these
-                                  as writable */
-  data_start = .;
-
-  . = ALIGN(16);               /* Exception table */
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
+       /* writeable */
+       /* Make sure this is page aligned so
+        * that we can properly leave these
+        * as writable
+        */
+       . = ALIGN(ASM_PAGE_SIZE);
+       data_start = .;
+       . = ALIGN(16);
+       /* Exception table */
+       __ex_table : {
+               __start___ex_table = .;
+               *(__ex_table)
+               __stop___ex_table = .;
+       }
 
-  NOTES
+       NOTES
 
-  __start___unwind = .;         /* unwind info */
-  .PARISC.unwind : { *(.PARISC.unwind) }
-  __stop___unwind = .;
+       /* unwind info */
+       .PARISC.unwind : {
+               __start___unwind = .;
+               *(.PARISC.unwind)
+               __stop___unwind = .;
+       }
 
-  /* rarely changed data like cpu maps */
-  . = ALIGN(16);
-  .data.read_mostly : { *(.data.read_mostly) }
+       /* rarely changed data like cpu maps */
+       . = ALIGN(16);
+       .data.read_mostly : {
+               *(.data.read_mostly)
+       }
 
-  . = ALIGN(L1_CACHE_BYTES);
-  .data : {                    /* Data */
-       DATA_DATA
-       CONSTRUCTORS
+       . = ALIGN(L1_CACHE_BYTES);
+       /* Data */
+       .data : {
+               DATA_DATA
+               CONSTRUCTORS
        }
 
-  . = ALIGN(L1_CACHE_BYTES);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+       . = ALIGN(L1_CACHE_BYTES);
+       .data.cacheline_aligned : {
+               *(.data.cacheline_aligned)
+       }
 
-  /* PA-RISC locks requires 16-byte alignment */
-  . = ALIGN(16);
-  .data.lock_aligned : { *(.data.lock_aligned) }
+       /* PA-RISC locks requires 16-byte alignment */
+       . = ALIGN(16);
+       .data.lock_aligned : {
+               *(.data.lock_aligned)
+       }
 
-  . = ALIGN(ASM_PAGE_SIZE);
-  /* nosave data is really only used for software suspend...it's here
-   * just in case we ever implement it */
-  __nosave_begin = .;
-  .data_nosave : { *(.data.nosave) }
-  . = ALIGN(ASM_PAGE_SIZE);
-  __nosave_end = .;
+       /* nosave data is really only used for software suspend...it's here
+        * just in case we ever implement it
+        */
+       . = ALIGN(ASM_PAGE_SIZE);
+       __nosave_begin = .;
+       .data_nosave : {
+               *(.data.nosave)
+       }
+       . = ALIGN(ASM_PAGE_SIZE);
+       __nosave_end = .;
 
-  _edata = .;                  /* End of data section */
+       /* End of data section */
+       _edata = .;
 
-  __bss_start = .;             /* BSS */
-  /* page table entries need to be PAGE_SIZE aligned */
-  . = ALIGN(ASM_PAGE_SIZE);
-  .data.vmpages : {
-       *(.data.vm0.pmd)
-       *(.data.vm0.pgd)
-       *(.data.vm0.pte)
+       /* BSS */
+       __bss_start = .;
+       /* page table entries need to be PAGE_SIZE aligned */
+       . = ALIGN(ASM_PAGE_SIZE);
+       .data.vmpages : {
+               *(.data.vm0.pmd)
+               *(.data.vm0.pgd)
+               *(.data.vm0.pte)
+       }
+       .bss : {
+               *(.bss)
+               *(COMMON)
        }
-  .bss : { *(.bss) *(COMMON) }
-  __bss_stop = .;
+       __bss_stop = .;
 
 
-  /* assembler code expects init_task to be 16k aligned */
-  . = ALIGN(16384);            /* init_task */
-  .data.init_task : { *(.data.init_task) }
+       /* assembler code expects init_task to be 16k aligned */
+       . = ALIGN(16384);
+       /* init_task */
+       .data.init_task : {
+               *(.data.init_task)
+       }
 
-  /* The interrupt stack is currently partially coded, but not yet
-   * implemented */
-  . = ALIGN(16384);    
-  init_istack : { *(init_istack) }
+       /* The interrupt stack is currently partially coded, but not yet
+        * implemented
+        */
+       . = ALIGN(16384);       
+       init_istack : {
+               *(init_istack)
+       }
 
 #ifdef CONFIG_64BIT
-  . = ALIGN(16);               /* Linkage tables */
-  .opd : { *(.opd) } PROVIDE (__gp = .); 
-  .plt : { *(.plt) } 
-  .dlt : { *(.dlt) }
+       . = ALIGN(16);
+       /* Linkage tables */
+       .opd : {
+               *(.opd)
+       } PROVIDE (__gp = .); 
+       .plt : {
+               *(.plt)
+       } 
+       .dlt : {
+               *(.dlt)
+       }
 #endif
 
-  /* reserve space for interrupt stack by aligning __init* to 16k */
-  . = ALIGN(16384);
-  __init_begin = .;
-  .init.text : { 
-       _sinittext = .;
-       *(.init.text)
-       _einittext = .;
-  }
-  .init.data : { *(.init.data) }
-  . = ALIGN(16);
-  __setup_start = .;
-  .init.setup : { *(.init.setup) }
-  __setup_end = .;
-  __initcall_start = .;
-  .initcall.init : {
-       INITCALLS
-  }
-  __initcall_end = .;
-  __con_initcall_start = .;
-  .con_initcall.init : { *(.con_initcall.init) }
-  __con_initcall_end = .;
-  SECURITY_INIT
-  /* alternate instruction replacement.  This is a mechanism x86 uses
-   * to detect the CPU type and replace generic instruction sequences
-   * with CPU specific ones.  We don't currently do this in PA, but
-   * it seems like a good idea... */
-  . = ALIGN(4);
-  __alt_instructions = .;
-  .altinstructions : { *(.altinstructions) } 
-  __alt_instructions_end = .; 
- .altinstr_replacement : { *(.altinstr_replacement) } 
-  /* .exit.text is discard at runtime, not link time, to deal with references
-     from .altinstructions and .eh_frame */
-  .exit.text : { *(.exit.text) }
-  .exit.data : { *(.exit.data) }
+       /* reserve space for interrupt stack by aligning __init* to 16k */
+       . = ALIGN(16384);
+       __init_begin = .;
+       .init.text : { 
+               _sinittext = .;
+               *(.init.text)
+               _einittext = .;
+       }
+       .init.data : {
+               *(.init.data)
+       }
+       . = ALIGN(16);
+       .init.setup : {
+               __setup_start = .;
+               *(.init.setup)
+               __setup_end = .;
+       }
+       .initcall.init : {
+               __initcall_start = .;
+               INITCALLS
+               __initcall_end = .;
+       }
+       .con_initcall.init : {
+               __con_initcall_start = .;
+               *(.con_initcall.init)
+               __con_initcall_end = .;
+       }
+       SECURITY_INIT
+
+       /* alternate instruction replacement.  This is a mechanism x86 uses
+        * to detect the CPU type and replace generic instruction sequences
+        * with CPU specific ones.  We don't currently do this in PA, but
+        * it seems like a good idea...
+        */
+       . = ALIGN(4);
+       .altinstructions : {
+               __alt_instructions = .;
+               *(.altinstructions)
+               __alt_instructions_end = .; 
+       } 
+       .altinstr_replacement : {
+               *(.altinstr_replacement)
+       } 
+
+       /* .exit.text is discard at runtime, not link time, to deal with references
+        *  from .altinstructions and .eh_frame
+        */
+       .exit.text : {
+               *(.exit.text)
+       }
+       .exit.data : {
+               *(.exit.data)
+       }
 #ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(ASM_PAGE_SIZE);
-  __initramfs_start = .;
-  .init.ramfs : { *(.init.ramfs) }
-  __initramfs_end = .;
+       . = ALIGN(ASM_PAGE_SIZE);
+       .init.ramfs : {
+               __initramfs_start = .;
+               *(.init.ramfs)
+               __initramfs_end = .;
+       }
 #endif
 
-  PERCPU(ASM_PAGE_SIZE)
+       PERCPU(ASM_PAGE_SIZE)
+       . = ALIGN(ASM_PAGE_SIZE);
+       __init_end = .;
+       /* freed after init ends here */
+       _end = . ;
 
-  . = ALIGN(ASM_PAGE_SIZE);
-  __init_end = .;
-  /* freed after init ends here */
-       
-  _end = . ;
-
-  /* Sections to be discarded */
-  /DISCARD/ : {
-       *(.exitcall.exit)
+       /* Sections to be discarded */
+       /DISCARD/ : {
+               *(.exitcall.exit)
 #ifdef CONFIG_64BIT
-       /* temporary hack until binutils is fixed to not emit these
-        for static binaries */
-       *(.interp)
-       *(.dynsym)
-       *(.dynstr)
-       *(.dynamic)
-       *(.hash)
-       *(.gnu.hash)
+               /* temporary hack until binutils is fixed to not emit these
+                * for static binaries
+                */
+               *(.interp)
+               *(.dynsym)
+               *(.dynstr)
+               *(.dynamic)
+               *(.hash)
+               *(.gnu.hash)
 #endif
        }
 
-  STABS_DEBUG
-  .note 0 : { *(.note) }       
-
+       STABS_DEBUG
+       .note 0 : { *(.note) }  
 }