/**
* struct _adapter - the main adapter structure for this device.
*
- * bup: True indicates that the interface is Up.
+ * bup: True indicates that the interface is up.
*/
struct _adapter {
struct dvobj_priv dvobjpriv;
IEEE80211_ASSOCIATING_RETRY,
/* the association procedure is sending AUTH request*/
IEEE80211_ASSOCIATING_AUTHENTICATING,
- /* the association procedure has successfully authentcated
+ /* the association procedure has successfully authenticated
* and is sending association request
*/
IEEE80211_ASSOCIATING_AUTHENTICATED,
******************************************************************************/
/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
+ * operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* Global definitions for the Ethernet IEEE 802.3 interface.
static int hci = RTL8712_USB;
static int ampdu_enable = 1;/*for enable tx_ampdu*/
-/* The video_mode variable is for vedio mode.*/
+/* The video_mode variable is for video mode.*/
/* It may be specify when inserting module with video_mode=1 parameter.*/
static int video_mode = 1; /* enable video mode*/
void r8712_stop_drv_threads(struct _adapter *padapter)
{
- /*Below is to termindate r8712_cmd_thread & event_thread...*/
+ /*Below is to terminate r8712_cmd_thread & event_thread...*/
up(&padapter->cmdpriv.cmd_queue_sema);
if (padapter->cmdThread)
_down_sema(&padapter->cmdpriv.terminate_cmdthread_sema);
* After trigger PBC, the variable will be set to false */
DBG_8712("CheckPbcGPIO - PBC is pressed !!!!\n");
/* 0 is the default value and it means the application monitors
- * the HW PBC doesn't privde its pid to driver. */
+ * the HW PBC doesn't provide its pid to driver. */
if (padapter->pid == 0)
return;
kill_pid(find_vpid(padapter->pid), SIGUSR1, 1);
*pcmdbuf = cpu_to_le32((cmdsz & 0x0000ffff) |
(pcmd->cmdcode << 16) |
(pcmdpriv->cmd_seq << 24));
- pcmdbuf += 2 ; /* 8 bytes aligment */
+ pcmdbuf += 2 ; /* 8 bytes alignment */
memcpy((u8 *)pcmdbuf, pcmd->parmbuf, pcmd->cmdsz);
while (check_cmd_fifo(padapter, wr_sz) == _FAIL) {
if ((padapter->bDriverStopped == true) ||
pevt_priv->event_seq++; /* update evt_seq */
if (pevt_priv->event_seq > 127)
pevt_priv->event_seq = 0;
- peventbuf = peventbuf + 2; /* move to event content, 8 bytes aligment */
+ peventbuf = peventbuf + 2; /* move to event content, 8 bytes alignment */
if (peventbuf) {
event_callback = wlanevents[evt_code].event_callback;
if (event_callback)
GEN_CMD_CODE(_GetCurDataRate) ,
GEN_CMD_CODE(_GetTxRetrycnt), /* to record times that Tx retry to
- * transmmit packet after association
+ * transmit packet after association
*/
GEN_CMD_CODE(_GetRxRetrycnt), /* to record total number of the
* received frame with ReTry bit set in
} else { /* write header fail */
bResult = false;
if (0xFF == efuse_data)
- return bResult; /* not thing damaged. */
+ return bResult; /* nothing damaged. */
/* call rescue procedure */
if (fix_header(padapter, efuse_data, efuse_addr) ==
false)
#define GPIOSEL_BT 2 /* BT_coex*/
#define GPIOSEL_WLANDBG 3 /* WLANDBG*/
#define GPIOSEL_GPIO_MASK (~(BIT(0)|BIT(1)))
-/* HW Readio OFF switch (GPIO BIT) */
+/* HW Radio OFF switch (GPIO BIT) */
#define HAL_8192S_HW_GPIO_OFF_BIT BIT(3)
#define HAL_8192S_HW_GPIO_OFF_MASK 0xF7
#define HAL_8192S_HW_GPIO_WPS_BIT BIT(4)
unsigned char rfintfs; /* 0:SWSI, 1:HWSI, 2:HWPI*/
unsigned char def_nettype;
unsigned char turboMode;
- unsigned char lowPowerMode;/* 0: noral mode, 1: low power mode*/
+ unsigned char lowPowerMode;/* 0: normal mode, 1: low power mode*/
/*--- long word 2 ----*/
unsigned char lbk_mode; /*0x00: normal, 0x03: MACLBK, 0x01: PHYLBK*/
unsigned char mp_mode; /* 1: for MP use, 0: for normal driver */
unsigned char rsvd053;
};
-struct fw_hdr {/*8-byte alinment required*/
+struct fw_hdr {/*8-byte alignment required*/
unsigned short signature;
unsigned short version; /*0x8000 ~ 0x8FFF for FPGA version,
*0x0000 ~ 0x7FFF for ASIC version,*/
* the # of times to blink is depend on time
* for scanning. */
LED_NO_LINK_BLINK = 7, /* LED is blinking during no link state. */
- LED_BLINK_StartToBlink = 8,/* Customzied for Sercomm Printer
+ LED_BLINK_StartToBlink = 8,/* Customized for Sercomm Printer
* Server case */
LED_BLINK_WPS = 9, /* LED is blinkg during WPS communication */
LED_TXRX_BLINK = 10,
{
struct LED_871x *pLed = (struct LED_871x *)data;
- /* This fixed the crash problem on Fedora 12 when trying to do thei
+ /* This fixed the crash problem on Fedora 12 when trying to do the
* insmod;ifconfig up;rmmod commands. */
if ((pLed->padapter->bSurpriseRemoved == true) ||
(pLed->padapter->bDriverStopped == true))
/* Description:
* Callback function of LED BlinkWorkItem.
- * We dispatch acture LED blink action according to LedStrategy.
+ * We dispatch actual LED blink action according to LedStrategy.
*/
static void BlinkWorkItemCallback(struct work_struct *work)
{
cmd_seq = (u8)((le32_to_cpu(voffset) >> 24) & 0x7f);
eid = (u8)((le32_to_cpu(voffset) >> 16) & 0xff);
r8712_event_handle(padapter, (uint *)poffset);
- poffset += (cmd_len + 8);/*8 bytes aligment*/
+ poffset += (cmd_len + 8);/*8 bytes alignment*/
} while (le32_to_cpu(voffset) & BIT(31));
}
}
}
spin_lock_irqsave(&ppending_recvframe_queue->lock, irql);
- /*s2. check if winstart_b(indicate_seq) needs to been updated*/
+ /*s2. check if winstart_b(indicate_seq) needs to be updated*/
if (!check_indicate_seq(preorder_ctrl, pattrib->seq_num))
goto _err_exit;
/*s3. Insert all packet into Reorder Queue to maintain its ordering.*/
* Result:
* 0x00: success
* 0x01: success, and check Response.
- * 0x02: cmd ignored due to duplicated sequcne number
+ * 0x02: cmd ignored due to duplicated sequence number
* 0x03: cmd dropped due to invalid cmd code
* 0x04: reserved.
*/
/* Add frequency/channel */
iwe.cmd = SIOCGIWFREQ;
{
- /* check legel index */
+ /* check legal index */
u8 dsconfig = pnetwork->network.Configuration.DSConfig;
if (dsconfig >= 1 && dsconfig <= sizeof(
ieee80211_wlan_frequencies) / sizeof(long))
/*
There are the BSSID information in the bssid.sa_data array.
- If cmd is IW_PMKSA_FLUSH, it means the wpa_suppplicant wants to clear
- all the PMKID information. If cmd is IW_PMKSA_ADD, it means the
- wpa_supplicant wants to add a PMKID/BSSID to driver.
+ If cmd is IW_PMKSA_FLUSH, it means the wpa_supplicant wants to clear
+ all the PMKID information. If cmd is IW_PMKSA_ADD, it means the
+ wpa_supplicant wants to add a PMKID/BSSID to driver.
If cmd is IW_PMKSA_REMOVE, it means the wpa_supplicant wants to
- remove a PMKID/BSSID from driver.
+ remove a PMKID/BSSID from driver.
*/
if (pPMK == NULL)
return -EINVAL;
range->max_qual.noise = 100;
range->max_qual.updated = 7; /* Updated all three */
range->avg_qual.qual = 92; /* > 8% missed beacons is 'bad' */
- /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+ /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
range->avg_qual.level = 20 + -98;
range->avg_qual.noise = 0;
range->avg_qual.updated = 7; /* Updated all three */
* MAC# of a preferred Access Point.
* Currently, the request comes via Wireless Extensions' SIOCSIWAP ioctl.
*
- * For this operation to succeed, there is no need for the interface to be Up.
+ * For this operation to succeed, there is no need for the interface to be up.
*
*/
static int r8711_wx_set_wap(struct net_device *dev,
(*pold_state == Ndis802_11Infrastructure) ||
(*pold_state == Ndis802_11IBSS)) {
/* will clr Linked_state before this function,
- * we must have chked whether issue dis-assoc_cmd or
+ * we must have checked whether issue dis-assoc_cmd or
* not */
r8712_ind_disconnect(padapter);
}
/*
return the wlan_network with the matching addr
- Shall be calle under atomic context...
+ Shall be called under atomic context...
to avoid possible racing condition...
*/
static struct wlan_network *_r8712_find_network(struct __queue *scanned_queue,
/*
return the wlan_network with the matching addr
- Shall be calle under atomic context...
+ Shall be called under atomic context...
to avoid possible racing condition...
*/
static struct wlan_network *r8712_find_network(struct __queue *scanned_queue,
* and the WiFi client will drop the data with seq number 0.
* So, the 8712 firmware has to inform driver with receiving the
* ADDBA-Req frame so that the driver can reset the
- * sequence value of Rx reorder contorl.
+ * sequence value of Rx reorder control.
*/
void r8712_got_addbareq_event_callback(struct _adapter *adapter, u8 *pbuf)
{
phtpriv->rx_ampdu_maxlen = max_ampdu_sz;
}
/* for A-MPDU Rx reordering buffer control for bmc_sta & sta_info
- * if A-MPDU Rx is enabled, reseting rx_ordering_ctrl
+ * if A-MPDU Rx is enabled, resetting rx_ordering_ctrl
* wstart_b(indicate_seq) to default value=0xffff
* todo: check if AP can send A-MPDU packets
*/
like ISR/Call-Back functions, the OID handlers, and even timer functions.
Each _queue has its own locks, already.
Other items are protected by mlme_priv.lock.
-To avoid possible dead lock, any thread trying to modifiying mlme_priv
-SHALL not lock up more than one locks at a time!
+To avoid possible dead lock, any thread trying to modify mlme_priv
+SHALL not lock up more than one lock at a time!
*/
#define traffic_threshold 10
* therefore set it to be the critical section...
*
* ### NOTE:#### (!!!!)
- * TAKE CARE THAT BEFORE CALLING THIS FUNC, LOCK pmlmepriv->lock
+ * TAKE CARE BEFORE CALLING THIS FUNC, LOCK pmlmepriv->lock
*/
static inline void set_fwstate(struct mlme_priv *pmlmepriv, sint state)
{
/*RxIQ DC offset, Rx digital filter, DC notch filter */
#define rOFDM0_XARxAFE 0xc10
-#define rOFDM0_XARxIQImbalance 0xc14 /* RxIQ imblance matrix */
+#define rOFDM0_XARxIQImbalance 0xc14 /* RxIQ imbalance matrix */
#define rOFDM0_XBRxAFE 0xc18
#define rOFDM0_XBRxIQImbalance 0xc1c
#define rOFDM0_XCRxAFE 0xc20
#define bCCKRxIG 0x7f00
#define bCCKLNAPolarity 0x800000
#define bCCKRx1stGain 0x7f0000
-#define bCCKRFExtend 0x20000000 /* CCK Rx Iinital gain polarity */
+#define bCCKRFExtend 0x20000000 /* CCK Rx inital gain polarity */
#define bCCKRxAGCSatLevel 0x1f000000
#define bCCKRxAGCSatCount 0xe0
#define bCCKRxRFSettle 0x1f /* AGCsamp_dly */
memset((unsigned char *)pxmitpriv, 0, sizeof(struct xmit_priv));
spin_lock_init(&pxmitpriv->lock);
/*
- Please insert all the queue initializaiton using _init_queue below
+ Please insert all the queue initialization using _init_queue below
*/
pxmitpriv->adapter = padapter;
_init_queue(&pxmitpriv->be_pending);
u8 priority;
u8 encrypt; /* when 0 indicate no encrypt. when non-zero,
- * indicate the encrypt algorith*/
+ * indicate the encrypt algorithm*/
u8 iv_len;
u8 icv_len;
unsigned char iv[8];
/* Enable AFE PLL Macro Block */
val8 = r8712_read8(padapter, AFE_PLL_CTRL);
r8712_write8(padapter, AFE_PLL_CTRL, (val8 | 0x11));
- /* Attatch AFE PLL to MACTOP/BB/PCIe Digital */
+ /* Attach AFE PLL to MACTOP/BB/PCIe Digital */
val8 = r8712_read8(padapter, SYS_ISO_CTRL);
r8712_write8(padapter, SYS_ISO_CTRL, (val8 & 0xEE));
/* Switch to 40M clock */
udelay(500);
r8712_write8(padapter, AFE_PLL_CTRL, (val8 | 0x11));
udelay(500);
- /* Attatch AFE PLL to MACTOP/BB/PCIe Digital */
+ /* Attach AFE PLL to MACTOP/BB/PCIe Digital */
val8 = r8712_read8(padapter, SYS_ISO_CTRL);
r8712_write8(padapter, SYS_ISO_CTRL, (val8 & 0xEE));
/* Switch to 40M clock */
/* decrease the reference count of the usb device structure
* when disconnect */
usb_put_dev(udev);
- /* If we didn't unplug usb dongle and remove/insert modlue, driver
+ /* If we didn't unplug usb dongle and remove/insert module, driver
* fails on sitesurvey for the first time when device is up.
* Reset usb port for sitesurvey fail issue. */
if (udev->state != USB_STATE_NOTATTACHED)
projects / platform / upstream / kernel-adaptation-pc.git / commitdiff