ARM: shmobile: lager: add gpio/fixed regulator for SDHI

Fixed regulator is used for SDHI0/2 Vcc.
We should use da9063 driver for Vccq,
but, it doesn't have regulator support at this point.
This patch uses gpio-regulator for it as quick-hack.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index 04cb932..267f2b3 100644 (file)
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -31,7 +31,9 @@
 #include <linux/platform_data/rcar-du.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
+#include <linux/regulator/driver.h>
 #include <linux/regulator/fixed.h>
+#include <linux/regulator/gpio-regulator.h>
 #include <linux/regulator/machine.h>
 #include <linux/sh_eth.h>
 #include <mach/common.h>
@@ -146,6 +148,71 @@ static struct regulator_consumer_supply fixed3v3_power_consumers[] =
        REGULATOR_SUPPLY("vmmc", "sh_mmcif.1"),
 };
 
+/*
+ * SDHI regulator macro
+ *
+ ** FIXME**
+ * Lager board vqmmc is provided via DA9063 PMIC chip,
+ * and we should use ${LINK}/drivers/mfd/da9063-* driver for it.
+ * but, it doesn't have regulator support at this point.
+ * It uses gpio-regulator for vqmmc as quick-hack.
+ */
+#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin)                         \
+static struct regulator_consumer_supply vcc_sdhi##idx##_consumer =     \
+       REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx);               \
+                                                                       \
+static struct regulator_init_data vcc_sdhi##idx##_init_data = {                \
+       .constraints = {                                                \
+               .valid_ops_mask = REGULATOR_CHANGE_STATUS,              \
+       },                                                              \
+       .consumer_supplies      = &vcc_sdhi##idx##_consumer,            \
+       .num_consumer_supplies  = 1,                                    \
+};                                                                     \
+                                                                       \
+static const struct fixed_voltage_config vcc_sdhi##idx##_info __initconst = {\
+       .supply_name    = "SDHI" #idx "Vcc",                            \
+       .microvolts     = 3300000,                                      \
+       .gpio           = vdd_pin,                                      \
+       .enable_high    = 1,                                            \
+       .init_data      = &vcc_sdhi##idx##_init_data,                   \
+};                                                                     \
+                                                                       \
+static struct regulator_consumer_supply vccq_sdhi##idx##_consumer =    \
+       REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx);              \
+                                                                       \
+static struct regulator_init_data vccq_sdhi##idx##_init_data = {       \
+       .constraints = {                                                \
+               .input_uV       = 3300000,                              \
+               .min_uV         = 1800000,                              \
+               .max_uV         = 3300000,                              \
+               .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |            \
+                                 REGULATOR_CHANGE_STATUS,              \
+       },                                                              \
+       .consumer_supplies      = &vccq_sdhi##idx##_consumer,           \
+       .num_consumer_supplies  = 1,                                    \
+};                                                                     \
+                                                                       \
+static struct gpio vccq_sdhi##idx##_gpio =                             \
+       { vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx };            \
+                                                                       \
+static struct gpio_regulator_state vccq_sdhi##idx##_states[] = {       \
+       { .value = 1800000, .gpios = 0 },                               \
+       { .value = 3300000, .gpios = 1 },                               \
+};                                                                     \
+                                                                       \
+static const struct gpio_regulator_config vccq_sdhi##idx##_info __initconst = {\
+       .supply_name    = "vqmmc",                                      \
+       .gpios          = &vccq_sdhi##idx##_gpio,                       \
+       .nr_gpios       = 1,                                            \
+       .states         = vccq_sdhi##idx##_states,                      \
+       .nr_states      = ARRAY_SIZE(vccq_sdhi##idx##_states),          \
+       .type           = REGULATOR_VOLTAGE,                            \
+       .init_data      = &vccq_sdhi##idx##_init_data,                  \
+};
+
+SDHI_REGULATOR(0, RCAR_GP_PIN(5, 24), RCAR_GP_PIN(5, 29));
+SDHI_REGULATOR(2, RCAR_GP_PIN(5, 25), RCAR_GP_PIN(5, 30));
+
 /* MMCIF */
 static const struct sh_mmcif_plat_data mmcif1_pdata __initconst = {
        .caps           = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
@@ -256,6 +323,9 @@ static const struct pinctrl_map lager_pinctrl_map[] = {
 
 static void __init lager_add_standard_devices(void)
 {
+       int fixed_regulator_idx = 0;
+       int gpio_regulator_idx = 0;
+
        r8a7790_clock_init();
 
        pinctrl_register_mappings(lager_pinctrl_map,
@@ -269,7 +339,8 @@ static void __init lager_add_standard_devices(void)
        platform_device_register_data(&platform_bus, "gpio-keys", -1,
                                      &lager_keys_pdata,
                                      sizeof(lager_keys_pdata));
-       regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+       regulator_register_always_on(fixed_regulator_idx++,
+                                    "fixed-3.3V", fixed3v3_power_consumers,
                                     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
        platform_device_register_resndata(&platform_bus, "sh_mmcif", 1,
                                          mmcif1_resources, ARRAY_SIZE(mmcif1_resources),
@@ -287,6 +358,16 @@ static void __init lager_add_standard_devices(void)
                                          ARRAY_SIZE(qspi_resources),
                                          &qspi_pdata, sizeof(qspi_pdata));
        spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
+
+       platform_device_register_data(&platform_bus, "reg-fixed-voltage", fixed_regulator_idx++,
+                                     &vcc_sdhi0_info, sizeof(struct fixed_voltage_config));
+       platform_device_register_data(&platform_bus, "reg-fixed-voltage", fixed_regulator_idx++,
+                                     &vcc_sdhi2_info, sizeof(struct fixed_voltage_config));
+
+       platform_device_register_data(&platform_bus, "gpio-regulator", gpio_regulator_idx++,
+                                     &vccq_sdhi0_info, sizeof(struct gpio_regulator_config));
+       platform_device_register_data(&platform_bus, "gpio-regulator", gpio_regulator_idx++,
+                                     &vccq_sdhi2_info, sizeof(struct gpio_regulator_config));
 }
 
 /*