added for completeness

diff --git a/FILES b/FILES
new file mode 100644 (file)
index 0000000..a7d472c
--- /dev/null
+++ b/FILES
@@ -0,0 +1,31 @@
+*.c
+*.h
+*.3
+NEWS
+README
+CHANGES
+FILES
+maketgz
+aclocal.m4
+Makefile.in
+install-sh
+mkinstalldirs
+configure
+configure.in
+config.guess
+config.sub
+vc/adig/adig.dep
+vc/adig/adig.dsp
+vc/adig/adig.mak
+vc/adig/adig.plg
+vc/vc.dsw
+vc/vc.ncb
+vc/vc.opt
+vc/ahost/ahost.dep
+vc/ahost/ahost.dsp
+vc/ahost/ahost.mak
+vc/ahost/ahost.plg
+vc/areslib/areslib.dep
+vc/areslib/areslib.dsp
+vc/areslib/areslib.mak
+vc/areslib/areslib.plg

diff --git a/install-sh b/install-sh
new file mode 100755 (executable)
index 0000000..e843669
--- /dev/null
+++ b/install-sh
@@ -0,0 +1,250 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+       -c) instcmd="$cpprog"
+           shift
+           continue;;
+
+       -d) dir_arg=true
+           shift
+           continue;;
+
+       -m) chmodcmd="$chmodprog $2"
+           shift
+           shift
+           continue;;
+
+       -o) chowncmd="$chownprog $2"
+           shift
+           shift
+           continue;;
+
+       -g) chgrpcmd="$chgrpprog $2"
+           shift
+           shift
+           continue;;
+
+       -s) stripcmd="$stripprog"
+           shift
+           continue;;
+
+       -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+           shift
+           continue;;
+
+       -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+           shift
+           continue;;
+
+       *)  if [ x"$src" = x ]
+           then
+               src=$1
+           else
+               # this colon is to work around a 386BSD /bin/sh bug
+               :
+               dst=$1
+           fi
+           shift
+           continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+       echo "install:  no input file specified"
+       exit 1
+else
+       true
+fi
+
+if [ x"$dir_arg" != x ]; then
+       dst=$src
+       src=""
+       
+       if [ -d $dst ]; then
+               instcmd=:
+       else
+               instcmd=mkdir
+       fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+       if [ -f $src -o -d $src ]
+       then
+               true
+       else
+               echo "install:  $src does not exist"
+               exit 1
+       fi
+       
+       if [ x"$dst" = x ]
+       then
+               echo "install:  no destination specified"
+               exit 1
+       else
+               true
+       fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+       if [ -d $dst ]
+       then
+               dst="$dst"/`basename $src`
+       else
+               true
+       fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='   
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+       pathcomp="${pathcomp}${1}"
+       shift
+
+       if [ ! -d "${pathcomp}" ] ;
+        then
+               $mkdirprog "${pathcomp}"
+       else
+               true
+       fi
+
+       pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+       $doit $instcmd $dst &&
+
+       if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+       if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+       if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+       if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+       if [ x"$transformarg" = x ] 
+       then
+               dstfile=`basename $dst`
+       else
+               dstfile=`basename $dst $transformbasename | 
+                       sed $transformarg`$transformbasename
+       fi
+
+# don't allow the sed command to completely eliminate the filename
+
+       if [ x"$dstfile" = x ] 
+       then
+               dstfile=`basename $dst`
+       else
+               true
+       fi
+
+# Make a temp file name in the proper directory.
+
+       dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+       $doit $instcmd $src $dsttmp &&
+
+       trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+       if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+       if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+       if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+       if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+       $doit $rmcmd -f $dstdir/$dstfile &&
+       $doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0

diff --git a/maketgz b/maketgz
new file mode 100755 (executable)
index 0000000..2638e2a
--- /dev/null
+++ b/maketgz
@@ -0,0 +1,89 @@
+#!/usr/bin/env perl
+
+$version = $ARGV[0];
+
+if($version eq "") {
+    print "Enter version number!\n";
+    exit;
+}
+
+if(!-f "ares.h") {
+    print "run this script in the ares source root dir\n";
+    exit;
+}
+
+@files=`find . -name FILES`;
+
+my @entries;
+
+sub dirpart {
+    my ($file)=@_;
+    my @p=split("/", $file);
+    $p[$#p]=""; # blank the last one
+    my $dir=join("/", @p);
+
+    $dir =~ s/^\.\///; # cut off ./ beginnings
+
+    $dir =~ s/\/$//;  # off / trailers
+
+    if(!$dir) {
+        $dir = ".";
+    }
+
+    return $dir;
+}
+
+sub add {
+    my ($file)=@_;
+
+    my $dir=dirpart($file);
+
+    open(FILE, "<$file");
+    while(<FILE>) {
+        if($_ =~ /^ *\#/) {
+            next;
+        }
+        chomp;
+        push @entries, "$dir/$_";
+    }
+    close(FILE);
+}
+
+for(@files) {
+    chomp;
+    add($_);
+}
+
+sub mkalldir {
+    my ($dir) = @_;
+
+    my @parts = split("/", $dir);
+
+    #print "IN: $dir\n";
+
+    my $sub="";
+    for(@parts) {
+        #print "PART: $_\n";
+
+        $sub .= "$_";
+        if($_ eq "") {
+            next;
+        }
+        mkdir($sub, 0777);
+        #print "make $sub\n";
+        $sub .= "/";
+    }
+    
+}
+
+for(@entries) {
+    my $dir = dirpart("arescurl-$version/$_");
+ #   print "Create $dir\n";
+    mkalldir($dir);
+ #   print "Copy $_ to $dir\n";
+    `cp -p $_ $dir`;
+}
+
+`tar -cf arescurl-$version.tar arescurl-$version`;
+`gzip -9 arescurl-$version.tar`;
+`rm -rf arescurl-$version`;

diff --git a/mkinstalldirs b/mkinstalldirs
new file mode 100755 (executable)
index 0000000..d0fd194
--- /dev/null
+++ b/mkinstalldirs
@@ -0,0 +1,40 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+# $Id$
+
+errstatus=0
+
+for file
+do
+   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+   shift
+
+   pathcomp=
+   for d
+   do
+     pathcomp="$pathcomp$d"
+     case "$pathcomp" in
+       -* ) pathcomp=./$pathcomp ;;
+     esac
+
+     if test ! -d "$pathcomp"; then
+        echo "mkdir $pathcomp" 1>&2
+
+        mkdir "$pathcomp" || lasterr=$?
+
+        if test ! -d "$pathcomp"; then
+         errstatus=$lasterr
+        fi
+     fi
+
+     pathcomp="$pathcomp/"
+   done
+done
+
+exit $errstatus
+
+# mkinstalldirs ends here