+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * OMAP7xx SPI 100k controller driver
- * Author: Fabrice Crohas <fcrohas@gmail.com>
- * from original omap1_mcspi driver
- *
- * Copyright (C) 2005, 2006 Nokia Corporation
- * Author: Samuel Ortiz <samuel.ortiz@nokia.com> and
- * Juha Yrjola <juha.yrjola@nokia.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <linux/spi/spi.h>
-
-#define OMAP1_SPI100K_MAX_FREQ 48000000
-
-#define ICR_SPITAS (OMAP7XX_ICR_BASE + 0x12)
-
-#define SPI_SETUP1 0x00
-#define SPI_SETUP2 0x02
-#define SPI_CTRL 0x04
-#define SPI_STATUS 0x06
-#define SPI_TX_LSB 0x08
-#define SPI_TX_MSB 0x0a
-#define SPI_RX_LSB 0x0c
-#define SPI_RX_MSB 0x0e
-
-#define SPI_SETUP1_INT_READ_ENABLE (1UL << 5)
-#define SPI_SETUP1_INT_WRITE_ENABLE (1UL << 4)
-#define SPI_SETUP1_CLOCK_DIVISOR(x) ((x) << 1)
-#define SPI_SETUP1_CLOCK_ENABLE (1UL << 0)
-
-#define SPI_SETUP2_ACTIVE_EDGE_FALLING (0UL << 0)
-#define SPI_SETUP2_ACTIVE_EDGE_RISING (1UL << 0)
-#define SPI_SETUP2_NEGATIVE_LEVEL (0UL << 5)
-#define SPI_SETUP2_POSITIVE_LEVEL (1UL << 5)
-#define SPI_SETUP2_LEVEL_TRIGGER (0UL << 10)
-#define SPI_SETUP2_EDGE_TRIGGER (1UL << 10)
-
-#define SPI_CTRL_SEN(x) ((x) << 7)
-#define SPI_CTRL_WORD_SIZE(x) (((x) - 1) << 2)
-#define SPI_CTRL_WR (1UL << 1)
-#define SPI_CTRL_RD (1UL << 0)
-
-#define SPI_STATUS_WE (1UL << 1)
-#define SPI_STATUS_RD (1UL << 0)
-
-/* use PIO for small transfers, avoiding DMA setup/teardown overhead and
- * cache operations; better heuristics consider wordsize and bitrate.
- */
-#define DMA_MIN_BYTES 8
-
-#define SPI_RUNNING 0
-#define SPI_SHUTDOWN 1
-
-struct omap1_spi100k {
- struct clk *ick;
- struct clk *fck;
-
- /* Virtual base address of the controller */
- void __iomem *base;
-};
-
-struct omap1_spi100k_cs {
- void __iomem *base;
- int word_len;
-};
-
-static void spi100k_enable_clock(struct spi_master *master)
-{
- unsigned int val;
- struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
-
- /* enable SPI */
- val = readw(spi100k->base + SPI_SETUP1);
- val |= SPI_SETUP1_CLOCK_ENABLE;
- writew(val, spi100k->base + SPI_SETUP1);
-}
-
-static void spi100k_disable_clock(struct spi_master *master)
-{
- unsigned int val;
- struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
-
- /* disable SPI */
- val = readw(spi100k->base + SPI_SETUP1);
- val &= ~SPI_SETUP1_CLOCK_ENABLE;
- writew(val, spi100k->base + SPI_SETUP1);
-}
-
-static void spi100k_write_data(struct spi_master *master, int len, int data)
-{
- struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
-
- /* write 16-bit word, shifting 8-bit data if necessary */
- if (len <= 8) {
- data <<= 8;
- len = 16;
- }
-
- spi100k_enable_clock(master);
- writew(data, spi100k->base + SPI_TX_MSB);
-
- writew(SPI_CTRL_SEN(0) |
- SPI_CTRL_WORD_SIZE(len) |
- SPI_CTRL_WR,
- spi100k->base + SPI_CTRL);
-
- /* Wait for bit ack send change */
- while ((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_WE) != SPI_STATUS_WE)
- ;
- udelay(1000);
-
- spi100k_disable_clock(master);
-}
-
-static int spi100k_read_data(struct spi_master *master, int len)
-{
- int dataL;
- struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
-
- /* Always do at least 16 bits */
- if (len <= 8)
- len = 16;
-
- spi100k_enable_clock(master);
- writew(SPI_CTRL_SEN(0) |
- SPI_CTRL_WORD_SIZE(len) |
- SPI_CTRL_RD,
- spi100k->base + SPI_CTRL);
-
- while ((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_RD) != SPI_STATUS_RD)
- ;
- udelay(1000);
-
- dataL = readw(spi100k->base + SPI_RX_LSB);
- readw(spi100k->base + SPI_RX_MSB);
- spi100k_disable_clock(master);
-
- return dataL;
-}
-
-static void spi100k_open(struct spi_master *master)
-{
- /* get control of SPI */
- struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
-
- writew(SPI_SETUP1_INT_READ_ENABLE |
- SPI_SETUP1_INT_WRITE_ENABLE |
- SPI_SETUP1_CLOCK_DIVISOR(0), spi100k->base + SPI_SETUP1);
-
- /* configure clock and interrupts */
- writew(SPI_SETUP2_ACTIVE_EDGE_FALLING |
- SPI_SETUP2_NEGATIVE_LEVEL |
- SPI_SETUP2_LEVEL_TRIGGER, spi100k->base + SPI_SETUP2);
-}
-
-static void omap1_spi100k_force_cs(struct omap1_spi100k *spi100k, int enable)
-{
- if (enable)
- writew(0x05fc, spi100k->base + SPI_CTRL);
- else
- writew(0x05fd, spi100k->base + SPI_CTRL);
-}
-
-static unsigned
-omap1_spi100k_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
-{
- struct omap1_spi100k_cs *cs = spi->controller_state;
- unsigned int count, c;
- int word_len;
-
- count = xfer->len;
- c = count;
- word_len = cs->word_len;
-
- if (word_len <= 8) {
- u8 *rx;
- const u8 *tx;
-
- rx = xfer->rx_buf;
- tx = xfer->tx_buf;
- do {
- c -= 1;
- if (xfer->tx_buf != NULL)
- spi100k_write_data(spi->master, word_len, *tx++);
- if (xfer->rx_buf != NULL)
- *rx++ = spi100k_read_data(spi->master, word_len);
- } while (c);
- } else if (word_len <= 16) {
- u16 *rx;
- const u16 *tx;
-
- rx = xfer->rx_buf;
- tx = xfer->tx_buf;
- do {
- c -= 2;
- if (xfer->tx_buf != NULL)
- spi100k_write_data(spi->master, word_len, *tx++);
- if (xfer->rx_buf != NULL)
- *rx++ = spi100k_read_data(spi->master, word_len);
- } while (c);
- } else if (word_len <= 32) {
- u32 *rx;
- const u32 *tx;
-
- rx = xfer->rx_buf;
- tx = xfer->tx_buf;
- do {
- c -= 4;
- if (xfer->tx_buf != NULL)
- spi100k_write_data(spi->master, word_len, *tx);
- if (xfer->rx_buf != NULL)
- *rx = spi100k_read_data(spi->master, word_len);
- } while (c);
- }
- return count - c;
-}
-
-/* called only when no transfer is active to this device */
-static int omap1_spi100k_setup_transfer(struct spi_device *spi,
- struct spi_transfer *t)
-{
- struct omap1_spi100k *spi100k = spi_master_get_devdata(spi->master);
- struct omap1_spi100k_cs *cs = spi->controller_state;
- u8 word_len;
-
- if (t != NULL)
- word_len = t->bits_per_word;
- else
- word_len = spi->bits_per_word;
-
- if (word_len > 32)
- return -EINVAL;
- cs->word_len = word_len;
-
- /* SPI init before transfer */
- writew(0x3e, spi100k->base + SPI_SETUP1);
- writew(0x00, spi100k->base + SPI_STATUS);
- writew(0x3e, spi100k->base + SPI_CTRL);
-
- return 0;
-}
-
-/* the spi->mode bits understood by this driver: */
-#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
-
-static int omap1_spi100k_setup(struct spi_device *spi)
-{
- int ret;
- struct omap1_spi100k *spi100k;
- struct omap1_spi100k_cs *cs = spi->controller_state;
-
- spi100k = spi_master_get_devdata(spi->master);
-
- if (!cs) {
- cs = devm_kzalloc(&spi->dev, sizeof(*cs), GFP_KERNEL);
- if (!cs)
- return -ENOMEM;
- cs->base = spi100k->base + spi->chip_select * 0x14;
- spi->controller_state = cs;
- }
-
- spi100k_open(spi->master);
-
- clk_prepare_enable(spi100k->ick);
- clk_prepare_enable(spi100k->fck);
-
- ret = omap1_spi100k_setup_transfer(spi, NULL);
-
- clk_disable_unprepare(spi100k->ick);
- clk_disable_unprepare(spi100k->fck);
-
- return ret;
-}
-
-static int omap1_spi100k_transfer_one_message(struct spi_master *master,
- struct spi_message *m)
-{
- struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
- struct spi_device *spi = m->spi;
- struct spi_transfer *t = NULL;
- int cs_active = 0;
- int status = 0;
-
- list_for_each_entry(t, &m->transfers, transfer_list) {
- if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
- break;
- }
- status = omap1_spi100k_setup_transfer(spi, t);
- if (status < 0)
- break;
-
- if (!cs_active) {
- omap1_spi100k_force_cs(spi100k, 1);
- cs_active = 1;
- }
-
- if (t->len) {
- unsigned count;
-
- count = omap1_spi100k_txrx_pio(spi, t);
- m->actual_length += count;
-
- if (count != t->len) {
- break;
- }
- }
-
- spi_transfer_delay_exec(t);
-
- /* ignore the "leave it on after last xfer" hint */
-
- if (t->cs_change) {
- omap1_spi100k_force_cs(spi100k, 0);
- cs_active = 0;
- }
- }
-
- status = omap1_spi100k_setup_transfer(spi, NULL);
-
- if (cs_active)
- omap1_spi100k_force_cs(spi100k, 0);
-
- m->status = status;
-
- spi_finalize_current_message(master);
-
- return status;
-}
-
-static int omap1_spi100k_probe(struct platform_device *pdev)
-{
- struct spi_master *master;
- struct omap1_spi100k *spi100k;
- int status = 0;
-
- if (!pdev->id)
- return -EINVAL;
-
- master = spi_alloc_master(&pdev->dev, sizeof(*spi100k));
- if (master == NULL) {
- dev_dbg(&pdev->dev, "master allocation failed\n");
- return -ENOMEM;
- }
-
- if (pdev->id != -1)
- master->bus_num = pdev->id;
-
- master->setup = omap1_spi100k_setup;
- master->transfer_one_message = omap1_spi100k_transfer_one_message;
- master->num_chipselect = 2;
- master->mode_bits = MODEBITS;
- master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
- master->min_speed_hz = OMAP1_SPI100K_MAX_FREQ/(1<<16);
- master->max_speed_hz = OMAP1_SPI100K_MAX_FREQ;
- master->auto_runtime_pm = true;
-
- spi100k = spi_master_get_devdata(master);
-
- /*
- * The memory region base address is taken as the platform_data.
- * You should allocate this with ioremap() before initializing
- * the SPI.
- */
- spi100k->base = (void __iomem *)dev_get_platdata(&pdev->dev);
-
- spi100k->ick = devm_clk_get(&pdev->dev, "ick");
- if (IS_ERR(spi100k->ick)) {
- dev_dbg(&pdev->dev, "can't get spi100k_ick\n");
- status = PTR_ERR(spi100k->ick);
- goto err;
- }
-
- spi100k->fck = devm_clk_get(&pdev->dev, "fck");
- if (IS_ERR(spi100k->fck)) {
- dev_dbg(&pdev->dev, "can't get spi100k_fck\n");
- status = PTR_ERR(spi100k->fck);
- goto err;
- }
-
- status = clk_prepare_enable(spi100k->ick);
- if (status != 0) {
- dev_err(&pdev->dev, "failed to enable ick: %d\n", status);
- goto err;
- }
-
- status = clk_prepare_enable(spi100k->fck);
- if (status != 0) {
- dev_err(&pdev->dev, "failed to enable fck: %d\n", status);
- goto err_ick;
- }
-
- pm_runtime_enable(&pdev->dev);
- pm_runtime_set_active(&pdev->dev);
-
- status = devm_spi_register_master(&pdev->dev, master);
- if (status < 0)
- goto err_fck;
-
- return status;
-
-err_fck:
- pm_runtime_disable(&pdev->dev);
- clk_disable_unprepare(spi100k->fck);
-err_ick:
- clk_disable_unprepare(spi100k->ick);
-err:
- spi_master_put(master);
- return status;
-}
-
-static int omap1_spi100k_remove(struct platform_device *pdev)
-{
- struct spi_master *master = platform_get_drvdata(pdev);
- struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
-
- pm_runtime_disable(&pdev->dev);
-
- clk_disable_unprepare(spi100k->fck);
- clk_disable_unprepare(spi100k->ick);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int omap1_spi100k_runtime_suspend(struct device *dev)
-{
- struct spi_master *master = dev_get_drvdata(dev);
- struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
-
- clk_disable_unprepare(spi100k->ick);
- clk_disable_unprepare(spi100k->fck);
-
- return 0;
-}
-
-static int omap1_spi100k_runtime_resume(struct device *dev)
-{
- struct spi_master *master = dev_get_drvdata(dev);
- struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
- int ret;
-
- ret = clk_prepare_enable(spi100k->ick);
- if (ret != 0) {
- dev_err(dev, "Failed to enable ick: %d\n", ret);
- return ret;
- }
-
- ret = clk_prepare_enable(spi100k->fck);
- if (ret != 0) {
- dev_err(dev, "Failed to enable fck: %d\n", ret);
- clk_disable_unprepare(spi100k->ick);
- return ret;
- }
-
- return 0;
-}
-#endif
-
-static const struct dev_pm_ops omap1_spi100k_pm = {
- SET_RUNTIME_PM_OPS(omap1_spi100k_runtime_suspend,
- omap1_spi100k_runtime_resume, NULL)
-};
-
-static struct platform_driver omap1_spi100k_driver = {
- .driver = {
- .name = "omap1_spi100k",
- .pm = &omap1_spi100k_pm,
- },
- .probe = omap1_spi100k_probe,
- .remove = omap1_spi100k_remove,
-};
-
-module_platform_driver(omap1_spi100k_driver);
-
-MODULE_DESCRIPTION("OMAP7xx SPI 100k controller driver");
-MODULE_AUTHOR("Fabrice Crohas <fcrohas@gmail.com>");
-MODULE_LICENSE("GPL");
projects / platform / kernel / linux-rpi.git / commitdiff