ARM: sunxi: DT: convert DTs to use common GPIOs includes

Replace the various raw GPIO flags by their definition in the common
dt-bindings header.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index 3bb6369..532ab3b 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -51,6 +51,8 @@
 #include "sun4i-a10.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "Mele A1000";
        compatible = "mele,a1000", "allwinner,sun4i-a10";
@@ -77,7 +79,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
                        cd-inverted;
                        status = "okay";
                };
@@ -159,12 +161,12 @@
 
                red {
                        label = "a1000:red:usr";
-                       gpios = <&pio 7 10 0>;
+                       gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>;
                };
 
                blue {
                        label = "a1000:blue:usr";
-                       gpios = <&pio 7 20 0>;
+                       gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
                };
        };
 
@@ -176,7 +178,7 @@
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
                enable-active-high;
-               gpio = <&pio 7 15 0>;
+               gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
        };
 
        reg_usb1_vbus: usb1-vbus {

diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
index b2b45c4..490b77c 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
@@ -49,6 +49,8 @@
 #include "sun4i-a10.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "BA10 tvbox";
        compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
@@ -74,7 +76,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
                        cd-inverted;
                        status = "okay";
                };
@@ -140,7 +142,7 @@
        };
 
        reg_usb2_vbus: usb2-vbus {
-               gpio = <&pio 7 12 0>;
+               gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 };

diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index b920271..53f12b7 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -50,6 +50,8 @@
 #include "sun4i-a10.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "Cubietech Cubieboard";
        compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
@@ -75,7 +77,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
                        cd-inverted;
                        status = "okay";
                };
@@ -163,12 +165,12 @@
 
                blue {
                        label = "cubieboard:blue:usr";
-                       gpios = <&pio 7 21 0>; /* LED1 */
+                       gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */
                };
 
                green {
                        label = "cubieboard:green:usr";
-                       gpios = <&pio 7 20 0>; /* LED2 */
+                       gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */
                        linux,default-trigger = "heartbeat";
                };
        };

diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index 0c6c81a..be1f29e 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -51,6 +51,8 @@
 #include "sun4i-a10.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "Miniand Hackberry";
        compatible = "miniand,hackberry", "allwinner,sun4i-a10";
@@ -77,7 +79,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
                        cd-inverted;
                        status = "okay";
                };
@@ -157,7 +159,7 @@
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
                enable-active-high;
-               gpio = <&pio 7 19 0>;
+               gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
        };
 
        reg_usb1_vbus: usb1-vbus {
@@ -166,7 +168,7 @@
 
        reg_usb2_vbus: usb2-vbus {
                pinctrl-0 = <&usb2_vbus_pin_hackberry>;
-               gpio = <&pio 7 12 0>;
+               gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 };

diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
index 5980ad0..4829143 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
@@ -51,6 +51,8 @@
 #include "sun4i-a10.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "INet-97F Rev 02";
        compatible = "primux,inet97fv2", "allwinner,sun4i-a10";
@@ -65,7 +67,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
                        cd-inverted;
                        status = "okay";
                };

diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index e556399..1db02eb 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -51,6 +51,8 @@
 #include "sun4i-a10.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "PineRiver Mini X-Plus";
        compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
@@ -61,7 +63,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
                        cd-inverted;
                        status = "okay";
                };

diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 3f60794..5d9b868 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -49,6 +49,8 @@
 #include "sun4i-a10.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "Olimex A10-OLinuXino-LIME";
        compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
@@ -74,7 +76,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
                        cd-inverted;
                        status = "okay";
                };
@@ -151,14 +153,14 @@
 
                green {
                        label = "a10-olinuxino-lime:green:usr";
-                       gpios = <&pio 7 2 0>;
+                       gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
                        default-state = "on";
                };
        };
 
        reg_ahci_5v: ahci-5v {
                pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-               gpio = <&pio 2 3 0>;
+               gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 

diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index 7367eff..48161ad 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -50,6 +50,8 @@
 #include "sun4i-a10.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "LinkSprite pcDuino";
        compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
@@ -75,7 +77,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
                        cd-inverted;
                        status = "okay";
                };

diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index dac9d49..f80d2fa 100644 (file)
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -50,6 +50,8 @@
 /dts-v1/;
 #include "sun5i-a10s.dtsi"
 #include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
@@ -77,7 +79,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 6 1 0>; /* PG1 */
+                       cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
                        cd-inverted;
                        status = "okay";
                };
@@ -87,7 +89,7 @@
                        pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 6 13 0>; /* PG13 */
+                       cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
                        cd-inverted;
                        status = "okay";
                };
@@ -226,14 +228,14 @@
 
                green {
                        label = "a10s-olinuxino-micro:green:usr";
-                       gpios = <&pio 4 3 0>;
+                       gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
                        default-state = "on";
                };
        };
 
        reg_usb1_vbus: usb1-vbus {
                pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
-               gpio = <&pio 1 10 0>;
+               gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 };

diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
index 3a0d9dc..da2d253 100644 (file)
--- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
@@ -49,6 +49,8 @@
 #include "sun5i-a10s.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "R7 A10s hdmi tv-stick";
        compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
@@ -59,7 +61,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 6 1 0>; /* PG1 */
+                       cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
                        cd-inverted;
                        status = "okay";
                };
@@ -123,14 +125,14 @@
 
                green {
                        label = "r7-tv-dongle:green:usr";
-                       gpios = <&pio 1 2 0>;
+                       gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
                        default-state = "on";
                };
        };
 
        reg_usb1_vbus: usb1-vbus {
                pinctrl-0 = <&usb1_vbus_pin_r7>;
-               gpio = <&pio 6 13 0>;
+               gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 };

diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
index ca6b6dd..bccc1bc 100644 (file)
--- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
+++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
@@ -49,6 +49,8 @@
 #include "sun5i-a13.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "HSG H702";
        compatible = "hsg,h702", "allwinner,sun5i-a13";
@@ -59,7 +61,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 6 0 0>; /* PG0 */
+                       cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
                        cd-inverted;
                        status = "okay";
                };

diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
index 729f02d..c301807 100644 (file)
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -50,6 +50,8 @@
 #include "sun5i-a13.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "Olimex A13-Olinuxino Micro";
        compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
@@ -60,7 +62,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 6 0 0>; /* PG0 */
+                       cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
                        cd-inverted;
                        status = "okay";
                };
@@ -133,14 +135,14 @@
 
                power {
                        label = "a13-olinuxino-micro:green:power";
-                       gpios = <&pio 6 9 0>;
+                       gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
                        default-state = "on";
                };
        };
 
        reg_usb1_vbus: usb1-vbus {
                pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
-               gpio = <&pio 6 11 0>;
+               gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 };

diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 529ff27..e28a076 100644 (file)
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -50,6 +50,8 @@
 /dts-v1/;
 #include "sun5i-a13.dtsi"
 #include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
@@ -62,7 +64,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 6 0 0>; /* PG0 */
+                       cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
                        cd-inverted;
                        status = "okay";
                };
@@ -174,14 +176,14 @@
                pinctrl-0 = <&led_pins_olinuxino>;
 
                power {
-                       gpios = <&pio 6 9 0>;
+                       gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
                        default-state = "on";
                };
        };
 
        reg_usb1_vbus: usb1-vbus {
                pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
-               gpio = <&pio 6 11 0>;
+               gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 };

diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
index 42a11f4..0d86e8c 100644 (file)
--- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
+++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
@@ -51,6 +51,8 @@
 #include "sun6i-a31.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "Allwinner A31 APP4 EVB1 Evaluation Board";
        compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31";
@@ -87,7 +89,7 @@
 
        reg_usb1_vbus: usb1-vbus {
                pinctrl-0 = <&usb1_vbus_pin_a>;
-               gpio = <&pio 7 27 0>;
+               gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 };

diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
index 2e5bcaf..deab8f3 100644 (file)
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -51,6 +51,8 @@
 #include "sun6i-a31.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "WITS A31 Colombus Evaluation Board";
        compatible = "wits,colombus", "allwinner,sun6i-a31";
@@ -65,7 +67,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
                        vmmc-supply = <&reg_vcc3v0>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 0 8 0>; /* PA8 */
+                       cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
                        cd-inverted;
                        status = "okay";
                };
@@ -127,7 +129,7 @@
        reg_usb2_vbus: usb2-vbus {
                pinctrl-names = "default";
                pinctrl-0 = <&usb2_vbus_pin_colombus>;
-               gpio = <&pio 7 24 0>;
+               gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 };

diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index a3bf209..7364d22 100644 (file)
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -51,6 +51,8 @@
 #include "sun6i-a31.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "Merrii A31 Hummingbird";
        compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
@@ -65,7 +67,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
                        vmmc-supply = <&reg_vcc3v0>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 0 8 0>; /* PA8 */
+                       cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
                        cd-inverted;
                        status = "okay";
                };
@@ -139,7 +141,7 @@
                        pinctrl-0 = <&gmac_pins_rgmii_a>;
                        phy = <&phy1>;
                        phy-mode = "rgmii";
-                       snps,reset-gpio = <&pio 0 21 0>;
+                       snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
                        snps,reset-active-low;
                        snps,reset-delays-us = <0 10000 30000>;
                        status = "okay";
@@ -152,7 +154,7 @@
 
        reg_usb1_vbus: usb1-vbus {
                pinctrl-0 = <&usb1_vbus_pin_a>;
-               gpio = <&pio 7 24 0>; /* PH24 */
+               gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
                status = "okay";
        };
 };

diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts
index 74d4a23..8018baa 100644 (file)
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -49,6 +49,8 @@
 #include "sun6i-a31.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "Mele M9 / A1000G Quad top set box";
        compatible = "mele,m9", "allwinner,sun6i-a31";
@@ -63,7 +65,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 22 0>; /* PH22 */
+                       cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
                        cd-inverted;
                        status = "okay";
                };
@@ -136,14 +138,14 @@
 
                blue {
                        label = "m9:blue:usr";
-                       gpios = <&pio 7 13 0>;
+                       gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
                };
        };
 
        reg_usb1_vbus: usb1-vbus {
                pinctrl-names = "default";
                pinctrl-0 = <&usb1_vbus_pin_m9>;
-               gpio = <&pio 2 27 0>;
+               gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 };

diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index e9e9658..e273f0e 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -51,6 +51,8 @@
 #include "sun7i-a20.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "LeMaker Banana Pi";
        compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
@@ -67,7 +69,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 10 0>; /* PH10 */
+                       cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
                        cd-inverted;
                        status = "okay";
                };
@@ -188,7 +190,7 @@
 
                green {
                        label = "bananapi:green:usr";
-                       gpios = <&pio 7 24 0>;
+                       gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
                };
        };
 
@@ -209,6 +211,6 @@
                regulator-max-microvolt = <3300000>;
                startup-delay-us = <100000>;
                enable-active-high;
-               gpio = <&pio 7 23 0>;
+               gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
        };
 };

diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 809d448..27ca1a1 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -15,6 +15,8 @@
 #include "sun7i-a20.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "Cubietech Cubieboard2";
        compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
@@ -25,7 +27,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
                        cd-inverted;
                        status = "okay";
                };
@@ -120,12 +122,12 @@
 
                blue {
                        label = "cubieboard2:blue:usr";
-                       gpios = <&pio 7 21 0>;
+                       gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
                };
 
                green {
                        label = "cubieboard2:green:usr";
-                       gpios = <&pio 7 20 0>;
+                       gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
                };
        };
 

diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 9812a3a..a6e88f8 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -15,6 +15,8 @@
 #include "sun7i-a20.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "Cubietech Cubietruck";
        compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
@@ -25,7 +27,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
                        cd-inverted;
                        status = "okay";
                };
@@ -168,34 +170,34 @@
 
                blue {
                        label = "cubietruck:blue:usr";
-                       gpios = <&pio 7 21 0>;
+                       gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
                };
 
                orange {
                        label = "cubietruck:orange:usr";
-                       gpios = <&pio 7 20 0>;
+                       gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
                };
 
                white {
                        label = "cubietruck:white:usr";
-                       gpios = <&pio 7 11 0>;
+                       gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
                };
 
                green {
                        label = "cubietruck:green:usr";
-                       gpios = <&pio 7 7 0>;
+                       gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
                };
        };
 
        reg_ahci_5v: ahci-5v {
                pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
-               gpio = <&pio 7 12 0>;
+               gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 
        reg_usb0_vbus: usb0-vbus {
                pinctrl-0 = <&usb0_vbus_pin_a>;
-               gpio = <&pio 7 17 0>;
+               gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 
@@ -215,6 +217,6 @@
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
                enable-active-high;
-               gpio = <&pio 7 9 0>;
+               gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>;
        };
 };

diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
index add6d95..3b8bd22 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
+++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
@@ -15,6 +15,8 @@
 #include "sun7i-a20.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "Merrii A20 Hummingbird";
        compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20";
@@ -25,7 +27,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
                        vmmc-supply = <&reg_vcc3v0>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
                        cd-inverted;
                        status = "okay";
                };
@@ -184,7 +186,7 @@
                        phy-mode = "rgmii";
                        phy-supply = <&reg_gmac_vdd>;
                        /* phy reset config */
-                       snps,reset-gpio = <&pio 0 17 0>; /* PA17 */
+                       snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
                        snps,reset-active-low;
                        /* wait 1s after reset, otherwise fail to read phy id */
                        snps,reset-delays-us = <0 10000 1000000>;
@@ -198,13 +200,13 @@
 
        reg_ahci_5v: ahci-5v {
                pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>;
-               gpio = <&pio 7 15 0>; /* PH15 */
+               gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
                status = "okay";
        };
 
        reg_usb1_vbus: usb1-vbus {
                pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>;
-               gpio = <&pio 7 2 0>; /* PH2 */
+               gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
                status = "okay";
        };
 
@@ -220,7 +222,7 @@
                regulator-min-microvolt = <3000000>;
                regulator-max-microvolt = <3000000>;
                enable-active-high;
-               gpio = <&pio 7 9 0>; /* PH9 */
+               gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
        };
 
        reg_gmac_vdd: gmac_vdd {
@@ -231,6 +233,6 @@
                regulator-min-microvolt = <3000000>;
                regulator-max-microvolt = <3000000>;
                enable-active-high;
-               gpio = <&pio 7 16 0>; /* PH16 */
+               gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */
        };
 };

diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
index 780f1aa..a422f19 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
@@ -49,6 +49,8 @@
 #include "sun7i-a20.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "I12 / Q5 / QT840A A20 tvbox";
        compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";
@@ -59,7 +61,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
                        cd-inverted;
                        status = "okay";
                };
@@ -179,12 +181,12 @@
 
                red {
                        label = "i12_tvbox:red:usr";
-                       gpios = <&pio 7 9 1>;
+                       gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
                };
 
                blue {
                        label = "i12_tvbox:blue:usr";
-                       gpios = <&pio 7 20 0>;
+                       gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
                };
        };
 
@@ -204,7 +206,7 @@
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
                enable-active-high;
-               gpio = <&pio 7 2 0>;
+               gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
        };
 
        reg_vmmc3_io: vmmc3-io {
@@ -217,7 +219,7 @@
                /* This controls VCC-PI, must be always on! */
                regulator-always-on;
                enable-active-high;
-               gpio = <&pio 7 12 0>;
+               gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
        };
 
        reg_gmac_3v3: gmac-3v3 {
@@ -229,6 +231,6 @@
                regulator-max-microvolt = <3300000>;
                startup-delay-us = <50000>;
                enable-active-high;
-               gpio = <&pio 7 21 0>;
+               gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;
        };
 };

diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts
index 8204623..3e40ae7 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-m3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-m3.dts
@@ -51,6 +51,8 @@
 #include "sun7i-a20.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "Mele M3";
        compatible = "mele,m3", "allwinner,sun7i-a20";
@@ -61,7 +63,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
                        cd-inverted;
                        status = "okay";
                };
@@ -154,7 +156,7 @@
 
                blue {
                        label = "m3:blue:usr";
-                       gpios = <&pio 7 20 0>;
+                       gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
                };
        };
 

diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
index 996da8b..0423b1c 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -52,6 +52,8 @@
 #include "sun7i-a20.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "Olimex A20-OLinuXino-LIME";
        compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20";
@@ -62,7 +64,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
                        cd-inverted;
                        status = "okay";
                };
@@ -152,14 +154,14 @@
 
                green {
                        label = "a20-olinuxino-lime:green:usr";
-                       gpios = <&pio 7 2 0>;
+                       gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
                        default-state = "on";
                };
        };
 
        reg_ahci_5v: ahci-5v {
                pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-               gpio = <&pio 2 3 0>;
+               gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 

diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 5fda1e0..ce1e28a 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -49,6 +49,8 @@
 #include "sun7i-a20.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "Olimex A20-OLinuXino-LIME2";
        compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20";
@@ -59,7 +61,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
                        cd-inverted;
                        status = "okay";
                };
@@ -199,14 +201,14 @@
 
                green {
                        label = "a20-olinuxino-lime2:green:usr";
-                       gpios = <&pio 7 2 0>;
+                       gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
                        default-state = "on";
                };
        };
 
        reg_ahci_5v: ahci-5v {
                pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-               gpio = <&pio 2 3 0>;
+               gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 

diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index c00badd..ae3dd39 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -14,6 +14,8 @@
 /dts-v1/;
 #include "sun7i-a20.dtsi"
 #include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
@@ -37,7 +39,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
                        cd-inverted;
                        status = "okay";
                };
@@ -47,7 +49,7 @@
                        pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 11 0>; /* PH11 */
+                       cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
                        cd-inverted;
                        status = "okay";
                };
@@ -221,7 +223,7 @@
 
                green {
                        label = "a20-olinuxino-micro:green:usr";
-                       gpios = <&pio 7 2 0>;
+                       gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
                        default-state = "on";
                };
        };

diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index eb7b887..acce933 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -63,7 +63,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
                        vmmc-supply = <&reg_vcc3v3>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
                        cd-inverted;
                        status = "okay";
                };
@@ -204,7 +204,7 @@
        };
 
        reg_ahci_5v: ahci-5v {
-               gpio = <&pio 7 2 0>;
+               gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 };

diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
index adc3a54..72ece67 100644 (file)
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
+++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
@@ -51,6 +51,8 @@
 #include "sun8i-a23.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "Ippo Q8H Dual Core Tablet (v5)";
        compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
@@ -69,7 +71,7 @@
                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
                        vmmc-supply = <&reg_vcc3v0>;
                        bus-width = <4>;
-                       cd-gpios = <&pio 1 4 0>; /* PB4 */
+                       cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
                        cd-inverted;
                        status = "okay";
                };

diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 7fe242a..8868c94 100644 (file)
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -50,6 +50,8 @@
 /dts-v1/;
 #include "sun9i-a80.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "Merrii A80 Optimus Board";
        compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
@@ -106,14 +108,14 @@
 
                led2 {
                        label = "optimus:led2:usr";
-                       gpios = <&pio 7 1 0>;
+                       gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
                };
 
                /* led3 is on PM15, in R_PIO */
 
                led4 {
                        label = "optimus:led4:usr";
-                       gpios = <&pio 7 0 0>;
+                       gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>;
                };
        };
 };

diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
index d887663..d6b7983 100644 (file)
--- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
@@ -47,6 +47,8 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        soc@01c00000 {
                pio: pinctrl@01c20800 {
@@ -89,7 +91,7 @@
                regulator-max-microvolt = <5000000>;
                regulator-boot-on;
                enable-active-high;
-               gpio = <&pio 1 8 0>;
+               gpio = <&pio 1 8 GPIO_ACTIVE_HIGH>;
                status = "disabled";
        };
 
@@ -101,7 +103,7 @@
                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;
                enable-active-high;
-               gpio = <&pio 1 9 0>;
+               gpio = <&pio 1 9 GPIO_ACTIVE_HIGH>;
                status = "disabled";
        };
 
@@ -113,7 +115,7 @@
                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;
                enable-active-high;
-               gpio = <&pio 7 6 0>;
+               gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>;
                status = "disabled";
        };
 
@@ -125,7 +127,7 @@
                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;
                enable-active-high;
-               gpio = <&pio 7 3 0>;
+               gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>;
                status = "disabled";
        };