arm64: dts: rockchip: Update nanopi4 phy reset properties

Use the now-preferred generic phy reset properties instead of the
dwmac-specific ones.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/4d16c24ae3651a2119cf5bb1213f46a9fce4b39a.1570444773.git.robin.murphy@arm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 3bd4cbf..b788ae4 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -152,9 +152,6 @@
        phy-handle = <&rtl8211e>;
        phy-mode = "rgmii";
        phy-supply = <&vcc3v3_s3>;
-       snps,reset-active-low;
-       snps,reset-delays-us = <0 10000 30000>;
-       snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
        tx_delay = <0x28>;
        rx_delay = <0x11>;
        status = "okay";
@@ -168,6 +165,9 @@
                        reg = <1>;
                        interrupt-parent = <&gpio3>;
                        interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+                       reset-assert-us = <10000>;
+                       reset-deassert-us = <30000>;
+                       reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
                };
        };
 };