--- /dev/null
+/* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones
+ * (e.g. Pinnacle 400e DVB-S USB2.0).
+ *
+ * The Pinnacle 400e uses the same protocol as the Technotrend USB1.1 boxes.
+ *
+ * TDA8263 + TDA10086
+ *
+ * I2C addresses:
+ * 0x08 - LNBP21PD - LNB power supply
+ * 0x0e - TDA10086 - Demodulator
+ * 0x50 - FX2 eeprom
+ * 0x60 - TDA8263 - Tuner
+ * 0x78 ???
+ *
+ * Copyright (c) 2002 Holger Waechtler <holger@convergence.de>
+ * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net>
+ * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#define DVB_USB_LOG_PREFIX "ttusb2"
+#include "dvb-usb.h"
+
+#include "ttusb2.h"
+
+#include "tda826x.h"
+#include "tda10086.h"
+#include "lnbp21.h"
+
+/* debug */
+static int dvb_usb_ttusb2_debug;
+#define deb_info(args...) dprintk(dvb_usb_ttusb2_debug,0x01,args)
+module_param_named(debug,dvb_usb_ttusb2_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." DVB_USB_DEBUG_STATUS);
+
+struct ttusb2_state {
+ u8 id;
+};
+
+static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd,
+ u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+ struct ttusb2_state *st = d->priv;
+ u8 s[wlen+4],r[64] = { 0 };
+ int ret = 0;
+
+ memset(s,0,wlen+4);
+
+ s[0] = 0xaa;
+ s[1] = ++st->id;
+ s[2] = cmd;
+ s[3] = wlen;
+ memcpy(&s[4],wbuf,wlen);
+
+ ret = dvb_usb_generic_rw(d, s, wlen+4, r, 64, 0);
+
+ if (ret != 0 ||
+ r[0] != 0x55 ||
+ r[1] != s[1] ||
+ r[2] != cmd ||
+ (rlen > 0 && r[3] != rlen)) {
+ warn("there might have been an error during control message transfer. (rlen = %d, was %d)",rlen,r[3]);
+ return -EIO;
+ }
+
+ if (rlen > 0)
+ memcpy(rbuf, &r[4], rlen);
+
+ return 0;
+}
+
+static int ttusb2_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ static u8 obuf[60], ibuf[60];
+ int i,read;
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ if (num > 2)
+ warn("more than 2 i2c messages at a time is not handled yet. TODO.");
+
+ for (i = 0; i < num; i++) {
+ read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
+
+ obuf[0] = (msg[i].addr << 1) | read;
+ obuf[1] = msg[i].len;
+
+ /* read request */
+ if (read)
+ obuf[2] = msg[i+1].len;
+ else
+ obuf[2] = 0;
+
+ memcpy(&obuf[3],msg[i].buf,msg[i].len);
+
+ if (ttusb2_msg(d, CMD_I2C_XFER, obuf, msg[i].len+3, ibuf, obuf[2] + 3) < 0) {
+ err("i2c transfer failed.");
+ break;
+ }
+
+ if (read) {
+ memcpy(msg[i+1].buf,&ibuf[3],msg[i+1].len);
+ i++;
+ }
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+ return i;
+}
+
+static u32 ttusb2_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm ttusb2_i2c_algo = {
+ .master_xfer = ttusb2_i2c_xfer,
+ .functionality = ttusb2_i2c_func,
+};
+
+/* Callbacks for DVB USB */
+static int ttusb2_identify_state (struct usb_device *udev, struct
+ dvb_usb_device_properties *props, struct dvb_usb_device_description **desc,
+ int *cold)
+{
+ *cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0;
+ return 0;
+}
+
+static int ttusb2_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+ u8 b = onoff;
+ ttusb2_msg(d, CMD_POWER, &b, 0, NULL, 0);
+ return ttusb2_msg(d, CMD_POWER, &b, 1, NULL, 0);
+}
+
+
+static struct tda10086_config tda10086_config = {
+ .demod_address = 0x0e,
+ .invert = 0,
+};
+
+static int ttusb2_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ if (usb_set_interface(adap->dev->udev,0,3) < 0)
+ err("set interface to alts=3 failed");
+
+ if ((adap->fe = dvb_attach(tda10086_attach, &tda10086_config, &adap->dev->i2c_adap)) == NULL) {
+ deb_info("TDA10086 attach failed\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int ttusb2_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ if (dvb_attach(tda826x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) {
+ deb_info("TDA8263 attach failed\n");
+ return -ENODEV;
+ }
+
+ if (dvb_attach(lnbp21_attach, adap->fe, &adap->dev->i2c_adap, 0, 0) == NULL) {
+ deb_info("LNBP21 attach failed\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties ttusb2_properties;
+
+static int ttusb2_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ return dvb_usb_device_init(intf,&ttusb2_properties,THIS_MODULE,NULL);
+}
+
+static struct usb_device_id ttusb2_table [] = {
+ { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_400E) },
+ {} /* Terminating entry */
+};
+MODULE_DEVICE_TABLE (usb, ttusb2_table);
+
+static struct dvb_usb_device_properties ttusb2_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+ .usb_ctrl = CYPRESS_FX2,
+ .firmware = "dvb-usb-pctv-400e-01.fw",
+
+ .size_of_priv = sizeof(struct ttusb2_state),
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .streaming_ctrl = NULL, // ttusb2_streaming_ctrl,
+
+ .frontend_attach = ttusb2_frontend_attach,
+ .tuner_attach = ttusb2_tuner_attach,
+
+ /* parameter for the MPEG2-data transfer */
+ .stream = {
+ .type = USB_ISOC,
+ .count = 5,
+ .endpoint = 0x02,
+ .u = {
+ .isoc = {
+ .framesperurb = 4,
+ .framesize = 940,
+ .interval = 1,
+ }
+ }
+ }
+ }
+ },
+
+ .power_ctrl = ttusb2_power_ctrl,
+ .identify_state = ttusb2_identify_state,
+
+ .i2c_algo = &ttusb2_i2c_algo,
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+
+ .num_device_descs = 1,
+ .devices = {
+ { "Pinnacle 400e DVB-S USB2.0",
+ { &ttusb2_table[0], NULL },
+ { NULL },
+ },
+ }
+};
+
+static struct usb_driver ttusb2_driver = {
+ .name = "dvb_usb_ttusb2",
+ .probe = ttusb2_probe,
+ .disconnect = dvb_usb_device_exit,
+ .id_table = ttusb2_table,
+};
+
+/* module stuff */
+static int __init ttusb2_module_init(void)
+{
+ int result;
+ if ((result = usb_register(&ttusb2_driver))) {
+ err("usb_register failed. Error number %d",result);
+ return result;
+ }
+
+ return 0;
+}
+
+static void __exit ttusb2_module_exit(void)
+{
+ /* deregister this driver from the USB subsystem */
+ usb_deregister(&ttusb2_driver);
+}
+
+module_init (ttusb2_module_init);
+module_exit (ttusb2_module_exit);
+
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_DESCRIPTION("Driver for Pinnacle PCTV 400e DVB-S USB2.0");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
--- /dev/null
+/* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones
+ * (e.g. Pinnacle 400e DVB-S USB2.0).
+ *
+ * Copyright (c) 2002 Holger Waechtler <holger@convergence.de>
+ * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net>
+ * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#ifndef _DVB_USB_TTUSB2_H_
+#define _DVB_USB_TTUSB2_H_
+
+/* TTUSB protocol
+ *
+ * always to messages (out/in)
+ * out message:
+ * 0xaa <id> <cmdbyte> <datalen> <data...>
+ *
+ * in message (complete block is always 0x40 bytes long)
+ * 0x55 <id> <cmdbyte> <datalen> <data...>
+ *
+ * id is incremented for each transaction
+ */
+
+#define CMD_DSP_DOWNLOAD 0x13
+/* out data: <byte>[28]
+ * last block must be empty */
+
+#define CMD_DSP_BOOT 0x14
+/* out data: nothing */
+
+#define CMD_POWER 0x15
+/* out data: <on=1/off=0> */
+
+#define CMD_LNB 0x16
+/* out data: <power=1> <18V=0,13V=1> <tone> <??=1> <??=1> */
+
+#define CMD_GET_VERSION 0x17
+/* in data: <version_byte>[5] */
+
+#define CMD_DISEQC 0x18
+/* out data: <master=0xff/burst=??> <cmdlen> <cmdbytes>[cmdlen] */
+
+#define CMD_PID_ENABLE 0x22
+/* out data: <index> <type: ts=1/sec=2> <pid msb> <pid lsb> */
+
+#define CMD_PID_DISABLE 0x23
+/* out data: <index> */
+
+#define CMD_FILTER_ENABLE 0x24
+/* out data: <index> <pid_idx> <filter>[12] <mask>[12] */
+
+#define CMD_FILTER_DISABLE 0x25
+/* out data: <index> */
+
+#define CMD_GET_DSP_VERSION 0x26
+/* in data: <version_byte>[28] */
+
+#define CMD_I2C_XFER 0x31
+/* out data: <addr << 1> <sndlen> <rcvlen> <data>[sndlen]
+ * in data: <addr << 1> <sndlen> <rcvlen> <data>[rcvlen] */
+
+#define CMD_I2C_BITRATE 0x32
+/* out data: <default=0> */
+
+#endif
projects / kernel / kernel-generic.git / commitdiff