dt-bindings: i2c: sun6i-p2wi: Add YAML schemas

Switch the DT binding to a YAML schema to enable the DT validation.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

diff --git a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml
new file mode 100644 (file)
index 0000000..1804abe
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/allwinner,sun6i-a31-p2wi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 P2WI (Push/Pull 2 Wires Interface) Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <maxime.ripard@bootlin.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: allwinner,sun6i-a31-p2wi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 1
+    maximum: 6000000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+# FIXME: We should set it, but it would report all the generic
+# properties as additional properties.
+# additionalProperties: false
+
+examples:
+  - |
+    i2c@1f03400 {
+        compatible = "allwinner,sun6i-a31-p2wi";
+        reg = <0x01f03400 0x400>;
+        interrupts = <0 39 4>;
+        clocks = <&apb0_gates 3>;
+        clock-frequency = <6000000>;
+        resets = <&apb0_rst 3>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        axp221: pmic@68 {
+            compatible = "x-powers,axp221";
+            reg = <0x68>;
+        };
+    };
+
+...

diff --git a/Documentation/devicetree/bindings/i2c/i2c-sun6i-p2wi.txt b/Documentation/devicetree/bindings/i2c/i2c-sun6i-p2wi.txt
deleted file mode 100644 (file)
index 49df005..0000000
--- a/Documentation/devicetree/bindings/i2c/i2c-sun6i-p2wi.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-
-* Allwinner P2WI (Push/Pull 2 Wire Interface) controller
-
-Required properties :
-
- - reg             : Offset and length of the register set for the device.
- - compatible      : Should one of the following:
-                     - "allwinner,sun6i-a31-p2wi"
- - interrupts      : The interrupt line connected to the P2WI peripheral.
- - clocks          : The gate clk connected to the P2WI peripheral.
- - resets          : The reset line connected to the P2WI peripheral.
-
-Optional properties :
-
- - clock-frequency : Desired P2WI bus clock frequency in Hz. If not set the
-default frequency is 100kHz
-
-A P2WI may contain one child node encoding a P2WI slave device.
-
-Slave device properties:
-  Required properties:
-   - reg           : the I2C slave address used during the initialization
-                     process to switch from I2C to P2WI mode
-
-Example:
-
-       p2wi@1f03400 {
-               compatible = "allwinner,sun6i-a31-p2wi";
-               reg = <0x01f03400 0x400>;
-               interrupts = <0 39 4>;
-               clocks = <&apb0_gates 3>;
-               clock-frequency = <6000000>;
-               resets = <&apb0_rst 3>;
-
-               axp221: pmic@68 {
-                       compatible = "x-powers,axp221";
-                       reg = <0x68>;
-
-                       /* ... */
-               };
-       };