Add.

diff --git a/distdir.am b/distdir.am
new file mode 100644 (file)
index 0000000..85e69f3
--- /dev/null
+++ b/distdir.am
@@ -0,0 +1,82 @@
+## automake - create Makefile.in from Makefile.am
+## Copyright 2001 Free Software Foundation, Inc.
+
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2, or (at your option)
+## any later version.
+
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+## 02111-1307, USA.
+
+.PHONY: distdir
+
+distdir: $(DISTFILES)
+##
+## For Gnits users, this is pretty handy.  Look at 15 lines
+## in case some explanatory text is desirable.
+##
+@TOPDIR@@CK-NEWS@      @if sed 15q $(srcdir)/NEWS | fgrep -e "$(VERSION)" > /dev/null; then :; else \
+@TOPDIR@@CK-NEWS@        echo "NEWS not updated; not releasing" 1>&2; \
+@TOPDIR@@CK-NEWS@        exit 1; \
+@TOPDIR@@CK-NEWS@      fi
+##
+## Only for the top dir.
+##
+@TOPDIR@       -chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir)
+@TOPDIR@       mkdir $(distdir)
+##
+##
+       $(mkinstalldirs) @DISTDIRS@
+##
+##
+       @for file in $(DISTFILES); do \
+##
+## In loop, test for file existence because sometimes a file gets
+## included in DISTFILES twice.  For example this happens when a single
+## source file is used in building more than one program.  Also, there
+## are situations in which "ln" can fail.  For instance a file to
+## distribute could actually be a cross-filesystem symlink -- this can
+## easily happen if "gettextize" was run on the distribution.
+##
+@CYGNUS@  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+@NCYGNUS@  d=$(srcdir); \
+##
+         if test -d $$d/$$file; then \
+## Don't mention $$file in destination argument, since this fails if
+## destination directory already exists.  Also, use `-R' and not `-r'.
+## `-r' is almost always incorrect.
+           cp -pR $$d/$$file $(distdir) \
+           || exit 1; \
+         else \
+           test -f $(distdir)/$$file \
+           || cp -p $$d/$$file $(distdir)/$$file \
+           || exit 1; \
+         fi; \
+       done
+##
+## Test for directory existence here because previous automake
+## invocation might have created some directories.  Note that we
+## explicitly set distdir for the subdir make; that lets us mix-n-match
+## many automake-using packages into one large package, and have "dist"
+## at the top level do the right thing.  If we're in the topmost
+## directory, then we use `distdir' instead of `top_distdir'; this lets
+## us work correctly with an enclosing package.
+##
+@SUBDIRS@      for subdir in $(@DIST_SUBDIR_NAME@); do \
+@SUBDIRS@        if test "$$subdir" = .; then :; else \
+@SUBDIRS@          test -d $(distdir)/$$subdir \
+@SUBDIRS@          || mkdir $(distdir)/$$subdir \
+@SUBDIRS@          || exit 1; \
+@SUBDIRS@          (cd $$subdir && \
+@SUBDIRS@            $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(@TOP_DISTDIR@) distdir=../$(distdir)/$$subdir distdir) \
+@SUBDIRS@            || exit 1; \
+@SUBDIRS@        fi; \
+@SUBDIRS@      done

diff --git a/lib/am/distdir.am b/lib/am/distdir.am
new file mode 100644 (file)
index 0000000..85e69f3
--- /dev/null
+++ b/lib/am/distdir.am
@@ -0,0 +1,82 @@
+## automake - create Makefile.in from Makefile.am
+## Copyright 2001 Free Software Foundation, Inc.
+
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2, or (at your option)
+## any later version.
+
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+## 02111-1307, USA.
+
+.PHONY: distdir
+
+distdir: $(DISTFILES)
+##
+## For Gnits users, this is pretty handy.  Look at 15 lines
+## in case some explanatory text is desirable.
+##
+@TOPDIR@@CK-NEWS@      @if sed 15q $(srcdir)/NEWS | fgrep -e "$(VERSION)" > /dev/null; then :; else \
+@TOPDIR@@CK-NEWS@        echo "NEWS not updated; not releasing" 1>&2; \
+@TOPDIR@@CK-NEWS@        exit 1; \
+@TOPDIR@@CK-NEWS@      fi
+##
+## Only for the top dir.
+##
+@TOPDIR@       -chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir)
+@TOPDIR@       mkdir $(distdir)
+##
+##
+       $(mkinstalldirs) @DISTDIRS@
+##
+##
+       @for file in $(DISTFILES); do \
+##
+## In loop, test for file existence because sometimes a file gets
+## included in DISTFILES twice.  For example this happens when a single
+## source file is used in building more than one program.  Also, there
+## are situations in which "ln" can fail.  For instance a file to
+## distribute could actually be a cross-filesystem symlink -- this can
+## easily happen if "gettextize" was run on the distribution.
+##
+@CYGNUS@  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+@NCYGNUS@  d=$(srcdir); \
+##
+         if test -d $$d/$$file; then \
+## Don't mention $$file in destination argument, since this fails if
+## destination directory already exists.  Also, use `-R' and not `-r'.
+## `-r' is almost always incorrect.
+           cp -pR $$d/$$file $(distdir) \
+           || exit 1; \
+         else \
+           test -f $(distdir)/$$file \
+           || cp -p $$d/$$file $(distdir)/$$file \
+           || exit 1; \
+         fi; \
+       done
+##
+## Test for directory existence here because previous automake
+## invocation might have created some directories.  Note that we
+## explicitly set distdir for the subdir make; that lets us mix-n-match
+## many automake-using packages into one large package, and have "dist"
+## at the top level do the right thing.  If we're in the topmost
+## directory, then we use `distdir' instead of `top_distdir'; this lets
+## us work correctly with an enclosing package.
+##
+@SUBDIRS@      for subdir in $(@DIST_SUBDIR_NAME@); do \
+@SUBDIRS@        if test "$$subdir" = .; then :; else \
+@SUBDIRS@          test -d $(distdir)/$$subdir \
+@SUBDIRS@          || mkdir $(distdir)/$$subdir \
+@SUBDIRS@          || exit 1; \
+@SUBDIRS@          (cd $$subdir && \
+@SUBDIRS@            $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(@TOP_DISTDIR@) distdir=../$(distdir)/$$subdir distdir) \
+@SUBDIRS@            || exit 1; \
+@SUBDIRS@        fi; \
+@SUBDIRS@      done