The Arm Ltd. boards were using an outdated address convention in the DT
node names, by separating the high from the low 32-bits of an address by
a comma.
Remove the comma from the node name suffix to be DT spec compliant.
Link: https://lore.kernel.org/r/20200513103016.130417-3-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
#interrupt-cells = <1>;
ranges;
- nor_flash: flash@0,00000000 {
+ nor_flash: flash@0 {
compatible = "arm,vexpress-flash", "cfi-flash";
reg = <0 0x00000000 0x04000000>,
<4 0x00000000 0x04000000>;
};
};
- psram@1,00000000 {
+ psram@100000000 {
compatible = "arm,vexpress-psram", "mtd-ram";
reg = <1 0x00000000 0x02000000>;
bank-width = <4>;
};
- ethernet@2,02000000 {
+ ethernet@202000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <2 0x02000000 0x10000>;
interrupts = <15>;
vddvario-supply = <&v2m_fixed_3v3>;
};
- usb@2,03000000 {
+ usb@203000000 {
compatible = "nxp,usb-isp1761";
reg = <2 0x03000000 0x20000>;
interrupts = <16>;
port1-otg;
};
- iofpga@3,00000000 {
+ iofpga@300000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
<0 0 41 &gic 0 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
<0 0 42 &gic 0 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- ethernet@2,02000000 {
+ ethernet@202000000 {
compatible = "smsc,lan91c111";
reg = <2 0x02000000 0x10000>;
interrupts = <15>;
clock-output-names = "v2m:refclk32khz";
};
- iofpga@3,00000000 {
+ iofpga@300000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
};
};
- flash@0,00000000 {
+ flash@0 {
/* 2 * 32MiB NOR Flash memory mounted on CS0 */
compatible = "arm,vexpress-flash", "cfi-flash";
reg = <0 0x00000000 0x04000000>;
};
};
- ethernet@2,00000000 {
+ ethernet@200000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <2 0x00000000 0x10000>;
interrupts = <3>;
vddvario-supply = <&mb_fixed_3v3>;
};
- iofpga@3,00000000 {
+ iofpga@300000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
motherboard {
arm,v2m-memory-map = "rs2";
- iofpga@3,00000000 {
+ iofpga@300000000 {
virtio-p9@140000 {
compatible = "virtio,mmio";
reg = <0x140000 0x200>;
#interrupt-cells = <1>;
ranges;
- flash@0,00000000 {
+ flash@0 {
compatible = "arm,vexpress-flash", "cfi-flash";
reg = <0 0x00000000 0x04000000>,
<4 0x00000000 0x04000000>;
bank-width = <4>;
};
- ethernet@2,02000000 {
+ ethernet@202000000 {
compatible = "smsc,lan91c111";
reg = <2 0x02000000 0x10000>;
interrupts = <15>;
clock-output-names = "v2m:refclk32khz";
};
- iofpga@3,00000000 {
+ iofpga@300000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;