This driver supports the NXP ENETC Ethernet controller found on some
of the NXP SoCs.
-config MDIO_MUX_I2CREG
- bool "MDIO MUX accessed as a register over I2C"
- depends on DM_MDIO_MUX && DM_I2C
- help
- This driver is used for MDIO muxes driven by writing to a register of
- an I2C chip. The board it was developed for uses a mux controlled by
- on-board FPGA which in turn is accessed as a chip over I2C.
-
endif # NETDEVICES
obj-$(CONFIG_LPC32XX_ETH) += lpc32xx_eth.o
obj-$(CONFIG_MACB) += macb.o
obj-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o
-obj-$(CONFIG_MDIO_MUX_I2CREG) += mdio_mux_i2creg.o
obj-$(CONFIG_MDIO_MUX_SANDBOX) += mdio_mux_sandbox.o
obj-$(CONFIG_MPC8XX_FEC) += mpc8xx_fec.o
obj-$(CONFIG_MT7628_ETH) += mt7628-eth.o