+++ /dev/null
-/* eth16i.c An ICL EtherTeam 16i and 32 EISA ethernet driver for Linux
-
- Written 1994-1999 by Mika Kuoppala
-
- Copyright (C) 1994-1999 by Mika Kuoppala
- Based on skeleton.c and heavily on at1700.c by Donald Becker
-
- This software may be used and distributed according to the terms
- of the GNU General Public License, incorporated herein by reference.
-
- The author may be reached as miku@iki.fi
-
- This driver supports following cards :
- - ICL EtherTeam 16i
- - ICL EtherTeam 32 EISA
- (Uses true 32 bit transfers rather than 16i compatibility mode)
-
- Example Module usage:
- insmod eth16i.o io=0x2a0 mediatype=bnc
-
- mediatype can be one of the following: bnc,tp,dix,auto,eprom
-
- 'auto' will try to autoprobe mediatype.
- 'eprom' will use whatever type defined in eprom.
-
- I have benchmarked driver with PII/300Mhz as a ftp client
- and 486/33Mhz as a ftp server. Top speed was 1128.37 kilobytes/sec.
-
- Sources:
- - skeleton.c a sample network driver core for linux,
- written by Donald Becker <becker@scyld.com>
- - at1700.c a driver for Allied Telesis AT1700, written
- by Donald Becker.
- - e16iSRV.asm a Netware 3.X Server Driver for ICL EtherTeam16i
- written by Markku Viima
- - The Fujitsu MB86965 databook.
-
- Author thanks following persons due to their valueble assistance:
- Markku Viima (ICL)
- Ari Valve (ICL)
- Donald Becker
- Kurt Huwig <kurt@huwig.de>
-
- Revision history:
-
- Version Date Description
-
- 0.01 15.12-94 Initial version (card detection)
- 0.02 23.01-95 Interrupt is now hooked correctly
- 0.03 01.02-95 Rewrote initialization part
- 0.04 07.02-95 Base skeleton done...
- Made a few changes to signature checking
- to make it a bit reliable.
- - fixed bug in tx_buf mapping
- - fixed bug in initialization (DLC_EN
- wasn't enabled when initialization
- was done.)
- 0.05 08.02-95 If there were more than one packet to send,
- transmit was jammed due to invalid
- register write...now fixed
- 0.06 19.02-95 Rewrote interrupt handling
- 0.07 13.04-95 Wrote EEPROM read routines
- Card configuration now set according to
- data read from EEPROM
- 0.08 23.06-95 Wrote part that tries to probe used interface
- port if AUTO is selected
-
- 0.09 01.09-95 Added module support
-
- 0.10 04.09-95 Fixed receive packet allocation to work
- with kernels > 1.3.x
-
- 0.20 20.09-95 Added support for EtherTeam32 EISA
-
- 0.21 17.10-95 Removed the unnecessary extern
- init_etherdev() declaration. Some
- other cleanups.
-
- 0.22 22.02-96 Receive buffer was not flushed
- correctly when faulty packet was
- received. Now fixed.
-
- 0.23 26.02-96 Made resetting the adapter
- more reliable.
-
- 0.24 27.02-96 Rewrote faulty packet handling in eth16i_rx
-
- 0.25 22.05-96 kfree() was missing from cleanup_module.
-
- 0.26 11.06-96 Sometimes card was not found by
- check_signature(). Now made more reliable.
-
- 0.27 23.06-96 Oops. 16 consecutive collisions halted
- adapter. Now will try to retransmit
- MAX_COL_16 times before finally giving up.
-
- 0.28 28.10-97 Added dev_id parameter (NULL) for free_irq
-
- 0.29 29.10-97 Multiple card support for module users
-
- 0.30 30.10-97 Fixed irq allocation bug.
- (request_irq moved from probe to open)
-
- 0.30a 21.08-98 Card detection made more relaxed. Driver
- had problems with some TCP/IP-PROM boots
- to find the card. Suggested by
- Kurt Huwig <kurt@huwig.de>
-
- 0.31 28.08-98 Media interface port can now be selected
- with module parameters or kernel
- boot parameters.
-
- 0.32 31.08-98 IRQ was never freed if open/close
- pair wasn't called. Now fixed.
-
- 0.33 10.09-98 When eth16i_open() was called after
- eth16i_close() chip never recovered.
- Now more shallow reset is made on
- close.
-
- 0.34 29.06-99 Fixed one bad #ifdef.
- Changed ioaddr -> io for consistency
-
- 0.35 01.07-99 transmit,-receive bytes were never
- updated in stats.
-
- Bugs:
- In some cases the media interface autoprobing code doesn't find
- the correct interface type. In this case you can
- manually choose the interface type in DOS with E16IC.EXE which is
- configuration software for EtherTeam16i and EtherTeam32 cards.
- This is also true for IRQ setting. You cannot use module
- parameter to configure IRQ of the card (yet).
-
- To do:
- - Real multicast support
- - Rewrite the media interface autoprobing code. Its _horrible_ !
- - Possibly merge all the MB86965 specific code to external
- module for use by eth16.c and Donald's at1700.c
- - IRQ configuration with module parameter. I will do
- this when i will get enough info about setting
- irq without configuration utility.
-*/
-
-static char *version =
- "eth16i.c: v0.35 01-Jul-1999 Mika Kuoppala (miku@iki.fi)\n";
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/bitops.h>
-#include <linux/jiffies.h>
-#include <linux/io.h>
-
-#include <asm/dma.h>
-
-
-
-/* Few macros */
-#define BITSET(ioaddr, bnum) ((outb(((inb(ioaddr)) | (bnum)), ioaddr)))
-#define BITCLR(ioaddr, bnum) ((outb(((inb(ioaddr)) & (~(bnum))), ioaddr)))
-
-/* This is the I/O address space for Etherteam 16i adapter. */
-#define ETH16I_IO_EXTENT 32
-
-/* Ticks before deciding that transmit has timed out */
-#define TX_TIMEOUT (400*HZ/1000)
-
-/* Maximum loop count when receiving packets */
-#define MAX_RX_LOOP 20
-
-/* Some interrupt masks */
-#define ETH16I_INTR_ON 0xef8a /* Higher is receive mask */
-#define ETH16I_INTR_OFF 0x0000
-
-/* Buffers header status byte meanings */
-#define PKT_GOOD BIT(5)
-#define PKT_GOOD_RMT BIT(4)
-#define PKT_SHORT BIT(3)
-#define PKT_ALIGN_ERR BIT(2)
-#define PKT_CRC_ERR BIT(1)
-#define PKT_RX_BUF_OVERFLOW BIT(0)
-
-/* Transmit status register (DLCR0) */
-#define TX_STATUS_REG 0
-#define TX_DONE BIT(7)
-#define NET_BUSY BIT(6)
-#define TX_PKT_RCD BIT(5)
-#define CR_LOST BIT(4)
-#define TX_JABBER_ERR BIT(3)
-#define COLLISION BIT(2)
-#define COLLISIONS_16 BIT(1)
-
-/* Receive status register (DLCR1) */
-#define RX_STATUS_REG 1
-#define RX_PKT BIT(7) /* Packet received */
-#define BUS_RD_ERR BIT(6)
-#define SHORT_PKT_ERR BIT(3)
-#define ALIGN_ERR BIT(2)
-#define CRC_ERR BIT(1)
-#define RX_BUF_OVERFLOW BIT(0)
-
-/* Transmit Interrupt Enable Register (DLCR2) */
-#define TX_INTR_REG 2
-#define TX_INTR_DONE BIT(7)
-#define TX_INTR_COL BIT(2)
-#define TX_INTR_16_COL BIT(1)
-
-/* Receive Interrupt Enable Register (DLCR3) */
-#define RX_INTR_REG 3
-#define RX_INTR_RECEIVE BIT(7)
-#define RX_INTR_SHORT_PKT BIT(3)
-#define RX_INTR_CRC_ERR BIT(1)
-#define RX_INTR_BUF_OVERFLOW BIT(0)
-
-/* Transmit Mode Register (DLCR4) */
-#define TRANSMIT_MODE_REG 4
-#define LOOPBACK_CONTROL BIT(1)
-#define CONTROL_OUTPUT BIT(2)
-
-/* Receive Mode Register (DLCR5) */
-#define RECEIVE_MODE_REG 5
-#define RX_BUFFER_EMPTY BIT(6)
-#define ACCEPT_BAD_PACKETS BIT(5)
-#define RECEIVE_SHORT_ADDR BIT(4)
-#define ACCEPT_SHORT_PACKETS BIT(3)
-#define REMOTE_RESET BIT(2)
-
-#define ADDRESS_FILTER_MODE BIT(1) | BIT(0)
-#define REJECT_ALL 0
-#define ACCEPT_ALL 3
-#define MODE_1 1 /* NODE ID, BC, MC, 2-24th bit */
-#define MODE_2 2 /* NODE ID, BC, MC, Hash Table */
-
-/* Configuration Register 0 (DLCR6) */
-#define CONFIG_REG_0 6
-#define DLC_EN BIT(7)
-#define SRAM_CYCLE_TIME_100NS BIT(6)
-#define SYSTEM_BUS_WIDTH_8 BIT(5) /* 1 = 8bit, 0 = 16bit */
-#define BUFFER_WIDTH_8 BIT(4) /* 1 = 8bit, 0 = 16bit */
-#define TBS1 BIT(3)
-#define TBS0 BIT(2)
-#define SRAM_BS1 BIT(1) /* 00=8kb, 01=16kb */
-#define SRAM_BS0 BIT(0) /* 10=32kb, 11=64kb */
-
-#ifndef ETH16I_TX_BUF_SIZE /* 0 = 2kb, 1 = 4kb */
-#define ETH16I_TX_BUF_SIZE 3 /* 2 = 8kb, 3 = 16kb */
-#endif
-#define TX_BUF_1x2048 0
-#define TX_BUF_2x2048 1
-#define TX_BUF_2x4098 2
-#define TX_BUF_2x8192 3
-
-/* Configuration Register 1 (DLCR7) */
-#define CONFIG_REG_1 7
-#define POWERUP BIT(5)
-
-/* Transmit start register */
-#define TRANSMIT_START_REG 10
-#define TRANSMIT_START_RB 2
-#define TX_START BIT(7) /* Rest of register bit indicate*/
- /* number of packets in tx buffer*/
-/* Node ID registers (DLCR8-13) */
-#define NODE_ID_0 8
-#define NODE_ID_RB 0
-
-/* Hash Table registers (HT8-15) */
-#define HASH_TABLE_0 8
-#define HASH_TABLE_RB 1
-
-/* Buffer memory ports */
-#define BUFFER_MEM_PORT_LB 8
-#define DATAPORT BUFFER_MEM_PORT_LB
-#define BUFFER_MEM_PORT_HB 9
-
-/* 16 Collision control register (BMPR11) */
-#define COL_16_REG 11
-#define HALT_ON_16 0x00
-#define RETRANS_AND_HALT_ON_16 0x02
-
-/* Maximum number of attempts to send after 16 concecutive collisions */
-#define MAX_COL_16 10
-
-/* DMA Burst and Transceiver Mode Register (BMPR13) */
-#define TRANSCEIVER_MODE_REG 13
-#define TRANSCEIVER_MODE_RB 2
-#define IO_BASE_UNLOCK BIT(7)
-#define LOWER_SQUELCH_TRESH BIT(6)
-#define LINK_TEST_DISABLE BIT(5)
-#define AUI_SELECT BIT(4)
-#define DIS_AUTO_PORT_SEL BIT(3)
-
-/* Filter Self Receive Register (BMPR14) */
-#define FILTER_SELF_RX_REG 14
-#define SKIP_RX_PACKET BIT(2)
-#define FILTER_SELF_RECEIVE BIT(0)
-
-/* EEPROM Control Register (BMPR 16) */
-#define EEPROM_CTRL_REG 16
-
-/* EEPROM Data Register (BMPR 17) */
-#define EEPROM_DATA_REG 17
-
-/* NMC93CSx6 EEPROM Control Bits */
-#define CS_0 0x00
-#define CS_1 0x20
-#define SK_0 0x00
-#define SK_1 0x40
-#define DI_0 0x00
-#define DI_1 0x80
-
-/* NMC93CSx6 EEPROM Instructions */
-#define EEPROM_READ 0x80
-
-/* NMC93CSx6 EEPROM Addresses */
-#define E_NODEID_0 0x02
-#define E_NODEID_1 0x03
-#define E_NODEID_2 0x04
-#define E_PORT_SELECT 0x14
- #define E_PORT_BNC 0x00
- #define E_PORT_DIX 0x01
- #define E_PORT_TP 0x02
- #define E_PORT_AUTO 0x03
- #define E_PORT_FROM_EPROM 0x04
-#define E_PRODUCT_CFG 0x30
-
-
-/* Macro to slow down io between EEPROM clock transitions */
-#define eeprom_slow_io() do { int _i = 40; while(--_i > 0) { inb(0x80); }}while(0)
-
-/* Jumperless Configuration Register (BMPR19) */
-#define JUMPERLESS_CONFIG 19
-
-/* ID ROM registers, writing to them also resets some parts of chip */
-#define ID_ROM_0 24
-#define ID_ROM_7 31
-#define RESET ID_ROM_0
-
-/* This is the I/O address list to be probed when seeking the card */
-static unsigned int eth16i_portlist[] __initdata = {
- 0x260, 0x280, 0x2A0, 0x240, 0x340, 0x320, 0x380, 0x300, 0
-};
-
-static unsigned int eth32i_portlist[] __initdata = {
- 0x1000, 0x2000, 0x3000, 0x4000, 0x5000, 0x6000, 0x7000, 0x8000,
- 0x9000, 0xA000, 0xB000, 0xC000, 0xD000, 0xE000, 0xF000, 0
-};
-
-/* This is the Interrupt lookup table for Eth16i card */
-static unsigned int eth16i_irqmap[] __initdata = { 9, 10, 5, 15, 0 };
-#define NUM_OF_ISA_IRQS 4
-
-/* This is the Interrupt lookup table for Eth32i card */
-static unsigned int eth32i_irqmap[] __initdata = { 3, 5, 7, 9, 10, 11, 12, 15, 0 };
-#define EISA_IRQ_REG 0xc89
-#define NUM_OF_EISA_IRQS 8
-
-static unsigned int eth16i_tx_buf_map[] = { 2048, 2048, 4096, 8192 };
-
-/* Use 0 for production, 1 for verification, >2 for debug */
-#ifndef ETH16I_DEBUG
-#define ETH16I_DEBUG 0
-#endif
-static unsigned int eth16i_debug = ETH16I_DEBUG;
-
-/* Information for each board */
-
-struct eth16i_local {
- unsigned char tx_started;
- unsigned char tx_buf_busy;
- unsigned short tx_queue; /* Number of packets in transmit buffer */
- unsigned short tx_queue_len;
- unsigned int tx_buf_size;
- unsigned long open_time;
- unsigned long tx_buffered_packets;
- unsigned long tx_buffered_bytes;
- unsigned long col_16;
- spinlock_t lock;
-};
-
-/* Function prototypes */
-
-static int eth16i_probe1(struct net_device *dev, int ioaddr);
-static int eth16i_check_signature(int ioaddr);
-static int eth16i_probe_port(int ioaddr);
-static void eth16i_set_port(int ioaddr, int porttype);
-static int eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l);
-static int eth16i_receive_probe_packet(int ioaddr);
-static int eth16i_get_irq(int ioaddr);
-static int eth16i_read_eeprom(int ioaddr, int offset);
-static int eth16i_read_eeprom_word(int ioaddr);
-static void eth16i_eeprom_cmd(int ioaddr, unsigned char command);
-static int eth16i_open(struct net_device *dev);
-static int eth16i_close(struct net_device *dev);
-static netdev_tx_t eth16i_tx(struct sk_buff *skb, struct net_device *dev);
-static void eth16i_rx(struct net_device *dev);
-static void eth16i_timeout(struct net_device *dev);
-static irqreturn_t eth16i_interrupt(int irq, void *dev_id);
-static void eth16i_reset(struct net_device *dev);
-static void eth16i_timeout(struct net_device *dev);
-static void eth16i_skip_packet(struct net_device *dev);
-static void eth16i_multicast(struct net_device *dev);
-static void eth16i_select_regbank(unsigned char regbank, int ioaddr);
-static void eth16i_initialize(struct net_device *dev, int boot);
-
-#if 0
-static int eth16i_set_irq(struct net_device *dev);
-#endif
-
-#ifdef MODULE
-static ushort eth16i_parse_mediatype(const char* s);
-#endif
-
-static char cardname[] __initdata = "ICL EtherTeam 16i/32";
-
-static int __init do_eth16i_probe(struct net_device *dev)
-{
- int i;
- int ioaddr;
- int base_addr = dev->base_addr;
-
- if(eth16i_debug > 4)
- printk(KERN_DEBUG "Probing started for %s\n", cardname);
-
- if(base_addr > 0x1ff) /* Check only single location */
- return eth16i_probe1(dev, base_addr);
- else if(base_addr != 0) /* Don't probe at all */
- return -ENXIO;
-
- /* Seek card from the ISA io address space */
- for(i = 0; (ioaddr = eth16i_portlist[i]) ; i++)
- if(eth16i_probe1(dev, ioaddr) == 0)
- return 0;
-
- /* Seek card from the EISA io address space */
- for(i = 0; (ioaddr = eth32i_portlist[i]) ; i++)
- if(eth16i_probe1(dev, ioaddr) == 0)
- return 0;
-
- return -ENODEV;
-}
-
-#ifndef MODULE
-struct net_device * __init eth16i_probe(int unit)
-{
- struct net_device *dev = alloc_etherdev(sizeof(struct eth16i_local));
- int err;
-
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
-
- err = do_eth16i_probe(dev);
- if (err)
- goto out;
- return dev;
-out:
- free_netdev(dev);
- return ERR_PTR(err);
-}
-#endif
-
-static const struct net_device_ops eth16i_netdev_ops = {
- .ndo_open = eth16i_open,
- .ndo_stop = eth16i_close,
- .ndo_start_xmit = eth16i_tx,
- .ndo_set_rx_mode = eth16i_multicast,
- .ndo_tx_timeout = eth16i_timeout,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-};
-
-static int __init eth16i_probe1(struct net_device *dev, int ioaddr)
-{
- struct eth16i_local *lp = netdev_priv(dev);
- static unsigned version_printed;
- int retval;
-
- /* Let's grab the region */
- if (!request_region(ioaddr, ETH16I_IO_EXTENT, cardname))
- return -EBUSY;
-
- /*
- The MB86985 chip has on register which holds information in which
- io address the chip lies. First read this register and compare
- it to our current io address and if match then this could
- be our chip.
- */
-
- if(ioaddr < 0x1000) {
- if(eth16i_portlist[(inb(ioaddr + JUMPERLESS_CONFIG) & 0x07)]
- != ioaddr) {
- retval = -ENODEV;
- goto out;
- }
- }
-
- /* Now we will go a bit deeper and try to find the chip's signature */
-
- if(eth16i_check_signature(ioaddr) != 0) {
- retval = -ENODEV;
- goto out;
- }
-
- /*
- Now it seems that we have found a ethernet chip in this particular
- ioaddr. The MB86985 chip has this feature, that when you read a
- certain register it will increase it's io base address to next
- configurable slot. Now when we have found the chip, first thing is
- to make sure that the chip's ioaddr will hold still here.
- */
-
- eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr);
- outb(0x00, ioaddr + TRANSCEIVER_MODE_REG);
-
- outb(0x00, ioaddr + RESET); /* Reset some parts of chip */
- BITSET(ioaddr + CONFIG_REG_0, BIT(7)); /* Disable the data link */
-
- if( (eth16i_debug & version_printed++) == 0)
- printk(KERN_INFO "%s", version);
-
- dev->base_addr = ioaddr;
- dev->irq = eth16i_get_irq(ioaddr);
-
- /* Try to obtain interrupt vector */
-
- if ((retval = request_irq(dev->irq, (void *)ð16i_interrupt, 0, cardname, dev))) {
- printk(KERN_WARNING "%s at %#3x, but is unusable due to conflicting IRQ %d.\n",
- cardname, ioaddr, dev->irq);
- goto out;
- }
-
- printk(KERN_INFO "%s: %s at %#3x, IRQ %d, ",
- dev->name, cardname, ioaddr, dev->irq);
-
-
- /* Now we will have to lock the chip's io address */
- eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr);
- outb(0x38, ioaddr + TRANSCEIVER_MODE_REG);
-
- eth16i_initialize(dev, 1); /* Initialize rest of the chip's registers */
-
- /* Now let's same some energy by shutting down the chip ;) */
- BITCLR(ioaddr + CONFIG_REG_1, POWERUP);
-
- /* Initialize the device structure */
- dev->netdev_ops = ð16i_netdev_ops;
- dev->watchdog_timeo = TX_TIMEOUT;
- spin_lock_init(&lp->lock);
-
- retval = register_netdev(dev);
- if (retval)
- goto out1;
- return 0;
-out1:
- free_irq(dev->irq, dev);
-out:
- release_region(ioaddr, ETH16I_IO_EXTENT);
- return retval;
-}
-
-
-static void eth16i_initialize(struct net_device *dev, int boot)
-{
- int ioaddr = dev->base_addr;
- int i, node_w = 0;
- unsigned char node_byte = 0;
-
- /* Setup station address */
- eth16i_select_regbank(NODE_ID_RB, ioaddr);
- for(i = 0 ; i < 3 ; i++) {
- unsigned short node_val = eth16i_read_eeprom(ioaddr, E_NODEID_0 + i);
- ((unsigned short *)dev->dev_addr)[i] = ntohs(node_val);
- }
-
- for(i = 0; i < 6; i++) {
- outb( ((unsigned char *)dev->dev_addr)[i], ioaddr + NODE_ID_0 + i);
- if(boot) {
- printk("%02x", inb(ioaddr + NODE_ID_0 + i));
- if(i != 5)
- printk(":");
- }
- }
-
- /* Now we will set multicast addresses to accept none */
- eth16i_select_regbank(HASH_TABLE_RB, ioaddr);
- for(i = 0; i < 8; i++)
- outb(0x00, ioaddr + HASH_TABLE_0 + i);
-
- /*
- Now let's disable the transmitter and receiver, set the buffer ram
- cycle time, bus width and buffer data path width. Also we shall
- set transmit buffer size and total buffer size.
- */
-
- eth16i_select_regbank(2, ioaddr);
-
- node_byte = 0;
- node_w = eth16i_read_eeprom(ioaddr, E_PRODUCT_CFG);
-
- if( (node_w & 0xFF00) == 0x0800)
- node_byte |= BUFFER_WIDTH_8;
-
- node_byte |= SRAM_BS1;
-
- if( (node_w & 0x00FF) == 64)
- node_byte |= SRAM_BS0;
-
- node_byte |= DLC_EN | SRAM_CYCLE_TIME_100NS | (ETH16I_TX_BUF_SIZE << 2);
-
- outb(node_byte, ioaddr + CONFIG_REG_0);
-
- /* We shall halt the transmitting, if 16 collisions are detected */
- outb(HALT_ON_16, ioaddr + COL_16_REG);
-
-#ifdef MODULE
- /* if_port already set by init_module() */
-#else
- dev->if_port = (dev->mem_start < E_PORT_FROM_EPROM) ?
- dev->mem_start : E_PORT_FROM_EPROM;
-#endif
-
- /* Set interface port type */
- if(boot) {
- static const char * const porttype[] = {
- "BNC", "DIX", "TP", "AUTO", "FROM_EPROM"
- };
-
- switch(dev->if_port)
- {
-
- case E_PORT_FROM_EPROM:
- dev->if_port = eth16i_read_eeprom(ioaddr, E_PORT_SELECT);
- break;
-
- case E_PORT_AUTO:
- dev->if_port = eth16i_probe_port(ioaddr);
- break;
-
- case E_PORT_BNC:
- case E_PORT_TP:
- case E_PORT_DIX:
- break;
- }
-
- printk(" %s interface.\n", porttype[dev->if_port]);
-
- eth16i_set_port(ioaddr, dev->if_port);
- }
-
- /* Set Receive Mode to normal operation */
- outb(MODE_2, ioaddr + RECEIVE_MODE_REG);
-}
-
-static int eth16i_probe_port(int ioaddr)
-{
- int i;
- int retcode;
- unsigned char dummy_packet[64];
-
- /* Powerup the chip */
- outb(0xc0 | POWERUP, ioaddr + CONFIG_REG_1);
-
- BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
-
- eth16i_select_regbank(NODE_ID_RB, ioaddr);
-
- for(i = 0; i < 6; i++) {
- dummy_packet[i] = inb(ioaddr + NODE_ID_0 + i);
- dummy_packet[i+6] = inb(ioaddr + NODE_ID_0 + i);
- }
-
- dummy_packet[12] = 0x00;
- dummy_packet[13] = 0x04;
- memset(dummy_packet + 14, 0, sizeof(dummy_packet) - 14);
-
- eth16i_select_regbank(2, ioaddr);
-
- for(i = 0; i < 3; i++) {
- BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
- BITCLR(ioaddr + CONFIG_REG_0, DLC_EN);
- eth16i_set_port(ioaddr, i);
-
- if(eth16i_debug > 1)
- printk(KERN_DEBUG "Set port number %d\n", i);
-
- retcode = eth16i_send_probe_packet(ioaddr, dummy_packet, 64);
- if(retcode == 0) {
- retcode = eth16i_receive_probe_packet(ioaddr);
- if(retcode != -1) {
- if(eth16i_debug > 1)
- printk(KERN_DEBUG "Eth16i interface port found at %d\n", i);
- return i;
- }
- }
- else {
- if(eth16i_debug > 1)
- printk(KERN_DEBUG "TRANSMIT_DONE timeout when probing interface port\n");
- }
- }
-
- if( eth16i_debug > 1)
- printk(KERN_DEBUG "Using default port\n");
-
- return E_PORT_BNC;
-}
-
-static void eth16i_set_port(int ioaddr, int porttype)
-{
- unsigned short temp = 0;
-
- eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr);
- outb(LOOPBACK_CONTROL, ioaddr + TRANSMIT_MODE_REG);
-
- temp |= DIS_AUTO_PORT_SEL;
-
- switch(porttype) {
-
- case E_PORT_BNC :
- temp |= AUI_SELECT;
- break;
-
- case E_PORT_TP :
- break;
-
- case E_PORT_DIX :
- temp |= AUI_SELECT;
- BITSET(ioaddr + TRANSMIT_MODE_REG, CONTROL_OUTPUT);
- break;
- }
-
- outb(temp, ioaddr + TRANSCEIVER_MODE_REG);
-
- if(eth16i_debug > 1) {
- printk(KERN_DEBUG "TRANSMIT_MODE_REG = %x\n", inb(ioaddr + TRANSMIT_MODE_REG));
- printk(KERN_DEBUG "TRANSCEIVER_MODE_REG = %x\n",
- inb(ioaddr+TRANSCEIVER_MODE_REG));
- }
-}
-
-static int eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l)
-{
- unsigned long starttime;
-
- outb(0xff, ioaddr + TX_STATUS_REG);
-
- outw(l, ioaddr + DATAPORT);
- outsw(ioaddr + DATAPORT, (unsigned short *)b, (l + 1) >> 1);
-
- starttime = jiffies;
- outb(TX_START | 1, ioaddr + TRANSMIT_START_REG);
-
- while( (inb(ioaddr + TX_STATUS_REG) & 0x80) == 0) {
- if( time_after(jiffies, starttime + TX_TIMEOUT)) {
- return -1;
- }
- }
-
- return 0;
-}
-
-static int eth16i_receive_probe_packet(int ioaddr)
-{
- unsigned long starttime;
-
- starttime = jiffies;
-
- while((inb(ioaddr + TX_STATUS_REG) & 0x20) == 0) {
- if( time_after(jiffies, starttime + TX_TIMEOUT)) {
-
- if(eth16i_debug > 1)
- printk(KERN_DEBUG "Timeout occurred waiting transmit packet received\n");
- starttime = jiffies;
- while((inb(ioaddr + RX_STATUS_REG) & 0x80) == 0) {
- if( time_after(jiffies, starttime + TX_TIMEOUT)) {
- if(eth16i_debug > 1)
- printk(KERN_DEBUG "Timeout occurred waiting receive packet\n");
- return -1;
- }
- }
-
- if(eth16i_debug > 1)
- printk(KERN_DEBUG "RECEIVE_PACKET\n");
- return 0; /* Found receive packet */
- }
- }
-
- if(eth16i_debug > 1) {
- printk(KERN_DEBUG "TRANSMIT_PACKET_RECEIVED %x\n", inb(ioaddr + TX_STATUS_REG));
- printk(KERN_DEBUG "RX_STATUS_REG = %x\n", inb(ioaddr + RX_STATUS_REG));
- }
-
- return 0; /* Return success */
-}
-
-#if 0
-static int eth16i_set_irq(struct net_device* dev)
-{
- const int ioaddr = dev->base_addr;
- const int irq = dev->irq;
- int i = 0;
-
- if(ioaddr < 0x1000) {
- while(eth16i_irqmap[i] && eth16i_irqmap[i] != irq)
- i++;
-
- if(i < NUM_OF_ISA_IRQS) {
- u8 cbyte = inb(ioaddr + JUMPERLESS_CONFIG);
- cbyte = (cbyte & 0x3F) | (i << 6);
- outb(cbyte, ioaddr + JUMPERLESS_CONFIG);
- return 0;
- }
- }
- else {
- printk(KERN_NOTICE "%s: EISA Interrupt cannot be set. Use EISA Configuration utility.\n", dev->name);
- }
-
- return -1;
-
-}
-#endif
-
-static int __init eth16i_get_irq(int ioaddr)
-{
- unsigned char cbyte;
-
- if( ioaddr < 0x1000) {
- cbyte = inb(ioaddr + JUMPERLESS_CONFIG);
- return eth16i_irqmap[((cbyte & 0xC0) >> 6)];
- } else { /* Oh..the card is EISA so method getting IRQ different */
- unsigned short index = 0;
- cbyte = inb(ioaddr + EISA_IRQ_REG);
- while( (cbyte & 0x01) == 0) {
- cbyte = cbyte >> 1;
- index++;
- }
- return eth32i_irqmap[index];
- }
-}
-
-static int __init eth16i_check_signature(int ioaddr)
-{
- int i;
- unsigned char creg[4] = { 0 };
-
- for(i = 0; i < 4 ; i++) {
-
- creg[i] = inb(ioaddr + TRANSMIT_MODE_REG + i);
-
- if(eth16i_debug > 1)
- printk("eth16i: read signature byte %x at %x\n",
- creg[i],
- ioaddr + TRANSMIT_MODE_REG + i);
- }
-
- creg[0] &= 0x0F; /* Mask collision cnr */
- creg[2] &= 0x7F; /* Mask DCLEN bit */
-
-#if 0
- /*
- This was removed because the card was sometimes left to state
- from which it couldn't be find anymore. If there is need
- to more strict check still this have to be fixed.
- */
- if( ! ((creg[0] == 0x06) && (creg[1] == 0x41)) ) {
- if(creg[1] != 0x42)
- return -1;
- }
-#endif
-
- if( !((creg[2] == 0x36) && (creg[3] == 0xE0)) ) {
- creg[2] &= 0x40;
- creg[3] &= 0x03;
-
- if( !((creg[2] == 0x40) && (creg[3] == 0x00)) )
- return -1;
- }
-
- if(eth16i_read_eeprom(ioaddr, E_NODEID_0) != 0)
- return -1;
-
- if((eth16i_read_eeprom(ioaddr, E_NODEID_1) & 0xFF00) != 0x4B00)
- return -1;
-
- return 0;
-}
-
-static int eth16i_read_eeprom(int ioaddr, int offset)
-{
- int data = 0;
-
- eth16i_eeprom_cmd(ioaddr, EEPROM_READ | offset);
- outb(CS_1, ioaddr + EEPROM_CTRL_REG);
- data = eth16i_read_eeprom_word(ioaddr);
- outb(CS_0 | SK_0, ioaddr + EEPROM_CTRL_REG);
-
- return data;
-}
-
-static int eth16i_read_eeprom_word(int ioaddr)
-{
- int i;
- int data = 0;
-
- for(i = 16; i > 0; i--) {
- outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG);
- eeprom_slow_io();
- outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG);
- eeprom_slow_io();
- data = (data << 1) |
- ((inb(ioaddr + EEPROM_DATA_REG) & DI_1) ? 1 : 0);
-
- eeprom_slow_io();
- }
-
- return data;
-}
-
-static void eth16i_eeprom_cmd(int ioaddr, unsigned char command)
-{
- int i;
-
- outb(CS_0 | SK_0, ioaddr + EEPROM_CTRL_REG);
- outb(DI_0, ioaddr + EEPROM_DATA_REG);
- outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG);
- outb(DI_1, ioaddr + EEPROM_DATA_REG);
- outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG);
-
- for(i = 7; i >= 0; i--) {
- short cmd = ( (command & (1 << i)) ? DI_1 : DI_0 );
- outb(cmd, ioaddr + EEPROM_DATA_REG);
- outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG);
- eeprom_slow_io();
- outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG);
- eeprom_slow_io();
- }
-}
-
-static int eth16i_open(struct net_device *dev)
-{
- struct eth16i_local *lp = netdev_priv(dev);
- int ioaddr = dev->base_addr;
-
- /* Powerup the chip */
- outb(0xc0 | POWERUP, ioaddr + CONFIG_REG_1);
-
- /* Initialize the chip */
- eth16i_initialize(dev, 0);
-
- /* Set the transmit buffer size */
- lp->tx_buf_size = eth16i_tx_buf_map[ETH16I_TX_BUF_SIZE & 0x03];
-
- if(eth16i_debug > 0)
- printk(KERN_DEBUG "%s: transmit buffer size %d\n",
- dev->name, lp->tx_buf_size);
-
- /* Now enable Transmitter and Receiver sections */
- BITCLR(ioaddr + CONFIG_REG_0, DLC_EN);
-
- /* Now switch to register bank 2, for run time operation */
- eth16i_select_regbank(2, ioaddr);
-
- lp->open_time = jiffies;
- lp->tx_started = 0;
- lp->tx_queue = 0;
- lp->tx_queue_len = 0;
-
- /* Turn on interrupts*/
- outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
-
- netif_start_queue(dev);
- return 0;
-}
-
-static int eth16i_close(struct net_device *dev)
-{
- struct eth16i_local *lp = netdev_priv(dev);
- int ioaddr = dev->base_addr;
-
- eth16i_reset(dev);
-
- /* Turn off interrupts*/
- outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
-
- netif_stop_queue(dev);
-
- lp->open_time = 0;
-
- /* Disable transmit and receive */
- BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
-
- /* Reset the chip */
- /* outb(0xff, ioaddr + RESET); */
- /* outw(0xffff, ioaddr + TX_STATUS_REG); */
-
- outb(0x00, ioaddr + CONFIG_REG_1);
-
- return 0;
-}
-
-static void eth16i_timeout(struct net_device *dev)
-{
- struct eth16i_local *lp = netdev_priv(dev);
- int ioaddr = dev->base_addr;
- /*
- If we get here, some higher level has decided that
- we are broken. There should really be a "kick me"
- function call instead.
- */
-
- outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
- printk(KERN_WARNING "%s: transmit timed out with status %04x, %s ?\n",
- dev->name,
- inw(ioaddr + TX_STATUS_REG), (inb(ioaddr + TX_STATUS_REG) & TX_DONE) ?
- "IRQ conflict" : "network cable problem");
-
- dev->trans_start = jiffies; /* prevent tx timeout */
-
- /* Let's dump all registers */
- if(eth16i_debug > 0) {
- printk(KERN_DEBUG "%s: timeout: %02x %02x %02x %02x %02x %02x %02x %02x.\n",
- dev->name, inb(ioaddr + 0),
- inb(ioaddr + 1), inb(ioaddr + 2),
- inb(ioaddr + 3), inb(ioaddr + 4),
- inb(ioaddr + 5),
- inb(ioaddr + 6), inb(ioaddr + 7));
-
- printk(KERN_DEBUG "%s: transmit start reg: %02x. collision reg %02x\n",
- dev->name, inb(ioaddr + TRANSMIT_START_REG),
- inb(ioaddr + COL_16_REG));
- printk(KERN_DEBUG "lp->tx_queue = %d\n", lp->tx_queue);
- printk(KERN_DEBUG "lp->tx_queue_len = %d\n", lp->tx_queue_len);
- printk(KERN_DEBUG "lp->tx_started = %d\n", lp->tx_started);
- }
- dev->stats.tx_errors++;
- eth16i_reset(dev);
- dev->trans_start = jiffies; /* prevent tx timeout */
- outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
- netif_wake_queue(dev);
-}
-
-static netdev_tx_t eth16i_tx(struct sk_buff *skb, struct net_device *dev)
-{
- struct eth16i_local *lp = netdev_priv(dev);
- int ioaddr = dev->base_addr;
- int status = 0;
- ushort length = skb->len;
- unsigned char *buf;
- unsigned long flags;
-
- if (length < ETH_ZLEN) {
- if (skb_padto(skb, ETH_ZLEN))
- return NETDEV_TX_OK;
- length = ETH_ZLEN;
- }
- buf = skb->data;
-
- netif_stop_queue(dev);
-
- /* Turn off TX interrupts */
- outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
-
- /* We would be better doing the disable_irq tricks the 3c509 does,
- that would make this suck a lot less */
-
- spin_lock_irqsave(&lp->lock, flags);
-
- if( (length + 2) > (lp->tx_buf_size - lp->tx_queue_len)) {
- if(eth16i_debug > 0)
- printk(KERN_WARNING "%s: Transmit buffer full.\n", dev->name);
- }
- else {
- outw(length, ioaddr + DATAPORT);
-
- if( ioaddr < 0x1000 )
- outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1);
- else {
- unsigned char frag = length % 4;
- outsl(ioaddr + DATAPORT, buf, length >> 2);
- if( frag != 0 ) {
- outsw(ioaddr + DATAPORT, (buf + (length & 0xFFFC)), 1);
- if( frag == 3 )
- outsw(ioaddr + DATAPORT,
- (buf + (length & 0xFFFC) + 2), 1);
- }
- }
- lp->tx_buffered_packets++;
- lp->tx_buffered_bytes = length;
- lp->tx_queue++;
- lp->tx_queue_len += length + 2;
- }
- lp->tx_buf_busy = 0;
-
- if(lp->tx_started == 0) {
- /* If the transmitter is idle..always trigger a transmit */
- outb(TX_START | lp->tx_queue, ioaddr + TRANSMIT_START_REG);
- lp->tx_queue = 0;
- lp->tx_queue_len = 0;
- lp->tx_started = 1;
- netif_wake_queue(dev);
- }
- else if(lp->tx_queue_len < lp->tx_buf_size - (ETH_FRAME_LEN + 2)) {
- /* There is still more room for one more packet in tx buffer */
- netif_wake_queue(dev);
- }
-
- spin_unlock_irqrestore(&lp->lock, flags);
-
- outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
- /* Turn TX interrupts back on */
- /* outb(TX_INTR_DONE | TX_INTR_16_COL, ioaddr + TX_INTR_REG); */
- status = 0;
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
-}
-
-static void eth16i_rx(struct net_device *dev)
-{
- int ioaddr = dev->base_addr;
- int boguscount = MAX_RX_LOOP;
-
- /* Loop until all packets have been read */
- while( (inb(ioaddr + RECEIVE_MODE_REG) & RX_BUFFER_EMPTY) == 0) {
-
- /* Read status byte from receive buffer */
- ushort status = inw(ioaddr + DATAPORT);
-
- /* Get the size of the packet from receive buffer */
- ushort pkt_len = inw(ioaddr + DATAPORT);
-
- if(eth16i_debug > 4)
- printk(KERN_DEBUG "%s: Receiving packet mode %02x status %04x.\n",
- dev->name,
- inb(ioaddr + RECEIVE_MODE_REG), status);
-
- if( !(status & PKT_GOOD) ) {
- dev->stats.rx_errors++;
-
- if( (pkt_len < ETH_ZLEN) || (pkt_len > ETH_FRAME_LEN) ) {
- dev->stats.rx_length_errors++;
- eth16i_reset(dev);
- return;
- }
- else {
- eth16i_skip_packet(dev);
- dev->stats.rx_dropped++;
- }
- }
- else { /* Ok so now we should have a good packet */
- struct sk_buff *skb;
-
- skb = netdev_alloc_skb(dev, pkt_len + 3);
- if( skb == NULL ) {
- printk(KERN_WARNING "%s: Could'n allocate memory for packet (len %d)\n",
- dev->name, pkt_len);
- eth16i_skip_packet(dev);
- dev->stats.rx_dropped++;
- break;
- }
-
- skb_reserve(skb,2);
-
- /*
- Now let's get the packet out of buffer.
- size is (pkt_len + 1) >> 1, cause we are now reading words
- and it have to be even aligned.
- */
-
- if(ioaddr < 0x1000)
- insw(ioaddr + DATAPORT, skb_put(skb, pkt_len),
- (pkt_len + 1) >> 1);
- else {
- unsigned char *buf = skb_put(skb, pkt_len);
- unsigned char frag = pkt_len % 4;
-
- insl(ioaddr + DATAPORT, buf, pkt_len >> 2);
-
- if(frag != 0) {
- unsigned short rest[2];
- rest[0] = inw( ioaddr + DATAPORT );
- if(frag == 3)
- rest[1] = inw( ioaddr + DATAPORT );
-
- memcpy(buf + (pkt_len & 0xfffc), (char *)rest, frag);
- }
- }
-
- skb->protocol=eth_type_trans(skb, dev);
-
- if( eth16i_debug > 5 ) {
- int i;
- printk(KERN_DEBUG "%s: Received packet of length %d.\n",
- dev->name, pkt_len);
- for(i = 0; i < 14; i++)
- printk(KERN_DEBUG " %02x", skb->data[i]);
- printk(KERN_DEBUG ".\n");
- }
- netif_rx(skb);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += pkt_len;
-
- } /* else */
-
- if(--boguscount <= 0)
- break;
-
- } /* while */
-}
-
-static irqreturn_t eth16i_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- struct eth16i_local *lp;
- int ioaddr = 0, status;
- int handled = 0;
-
- ioaddr = dev->base_addr;
- lp = netdev_priv(dev);
-
- /* Turn off all interrupts from adapter */
- outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
-
- /* eth16i_tx won't be called */
- spin_lock(&lp->lock);
-
- status = inw(ioaddr + TX_STATUS_REG); /* Get the status */
- outw(status, ioaddr + TX_STATUS_REG); /* Clear status bits */
-
- if (status)
- handled = 1;
-
- if(eth16i_debug > 3)
- printk(KERN_DEBUG "%s: Interrupt with status %04x.\n", dev->name, status);
-
- if( status & 0x7f00 ) {
-
- dev->stats.rx_errors++;
-
- if(status & (BUS_RD_ERR << 8) )
- printk(KERN_WARNING "%s: Bus read error.\n",dev->name);
- if(status & (SHORT_PKT_ERR << 8) ) dev->stats.rx_length_errors++;
- if(status & (ALIGN_ERR << 8) ) dev->stats.rx_frame_errors++;
- if(status & (CRC_ERR << 8) ) dev->stats.rx_crc_errors++;
- if(status & (RX_BUF_OVERFLOW << 8) ) dev->stats.rx_over_errors++;
- }
- if( status & 0x001a) {
-
- dev->stats.tx_errors++;
-
- if(status & CR_LOST) dev->stats.tx_carrier_errors++;
- if(status & TX_JABBER_ERR) dev->stats.tx_window_errors++;
-
-#if 0
- if(status & COLLISION) {
- dev->stats.collisions +=
- ((inb(ioaddr+TRANSMIT_MODE_REG) & 0xF0) >> 4);
- }
-#endif
- if(status & COLLISIONS_16) {
- if(lp->col_16 < MAX_COL_16) {
- lp->col_16++;
- dev->stats.collisions++;
- /* Resume transmitting, skip failed packet */
- outb(0x02, ioaddr + COL_16_REG);
- }
- else {
- printk(KERN_WARNING "%s: bailing out due to many consecutive 16-in-a-row collisions. Network cable problem?\n", dev->name);
- }
- }
- }
-
- if( status & 0x00ff ) { /* Let's check the transmit status reg */
-
- if(status & TX_DONE) { /* The transmit has been done */
- dev->stats.tx_packets = lp->tx_buffered_packets;
- dev->stats.tx_bytes += lp->tx_buffered_bytes;
- lp->col_16 = 0;
-
- if(lp->tx_queue) { /* Is there still packets ? */
- /* There was packet(s) so start transmitting and write also
- how many packets there is to be sended */
- outb(TX_START | lp->tx_queue, ioaddr + TRANSMIT_START_REG);
- lp->tx_queue = 0;
- lp->tx_queue_len = 0;
- lp->tx_started = 1;
- }
- else {
- lp->tx_started = 0;
- }
- netif_wake_queue(dev);
- }
- }
-
- if( ( status & 0x8000 ) ||
- ( (inb(ioaddr + RECEIVE_MODE_REG) & RX_BUFFER_EMPTY) == 0) ) {
- eth16i_rx(dev); /* We have packet in receive buffer */
- }
-
- /* Turn interrupts back on */
- outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
-
- if(lp->tx_queue_len < lp->tx_buf_size - (ETH_FRAME_LEN + 2)) {
- /* There is still more room for one more packet in tx buffer */
- netif_wake_queue(dev);
- }
-
- spin_unlock(&lp->lock);
-
- return IRQ_RETVAL(handled);
-}
-
-static void eth16i_skip_packet(struct net_device *dev)
-{
- int ioaddr = dev->base_addr;
-
- inw(ioaddr + DATAPORT);
- inw(ioaddr + DATAPORT);
- inw(ioaddr + DATAPORT);
-
- outb(SKIP_RX_PACKET, ioaddr + FILTER_SELF_RX_REG);
- while( inb( ioaddr + FILTER_SELF_RX_REG ) != 0);
-}
-
-static void eth16i_reset(struct net_device *dev)
-{
- struct eth16i_local *lp = netdev_priv(dev);
- int ioaddr = dev->base_addr;
-
- if(eth16i_debug > 1)
- printk(KERN_DEBUG "%s: Resetting device.\n", dev->name);
-
- BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
- outw(0xffff, ioaddr + TX_STATUS_REG);
- eth16i_select_regbank(2, ioaddr);
-
- lp->tx_started = 0;
- lp->tx_buf_busy = 0;
- lp->tx_queue = 0;
- lp->tx_queue_len = 0;
- BITCLR(ioaddr + CONFIG_REG_0, DLC_EN);
-}
-
-static void eth16i_multicast(struct net_device *dev)
-{
- int ioaddr = dev->base_addr;
-
- if (!netdev_mc_empty(dev) || dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
- {
- outb(3, ioaddr + RECEIVE_MODE_REG);
- } else {
- outb(2, ioaddr + RECEIVE_MODE_REG);
- }
-}
-
-static void eth16i_select_regbank(unsigned char banknbr, int ioaddr)
-{
- unsigned char data;
-
- data = inb(ioaddr + CONFIG_REG_1);
- outb( ((data & 0xF3) | ( (banknbr & 0x03) << 2)), ioaddr + CONFIG_REG_1);
-}
-
-#ifdef MODULE
-
-static ushort eth16i_parse_mediatype(const char* s)
-{
- if(!s)
- return E_PORT_FROM_EPROM;
-
- if (!strncmp(s, "bnc", 3))
- return E_PORT_BNC;
- else if (!strncmp(s, "tp", 2))
- return E_PORT_TP;
- else if (!strncmp(s, "dix", 3))
- return E_PORT_DIX;
- else if (!strncmp(s, "auto", 4))
- return E_PORT_AUTO;
- else
- return E_PORT_FROM_EPROM;
-}
-
-#define MAX_ETH16I_CARDS 4 /* Max number of Eth16i cards per module */
-
-static struct net_device *dev_eth16i[MAX_ETH16I_CARDS];
-static int io[MAX_ETH16I_CARDS];
-#if 0
-static int irq[MAX_ETH16I_CARDS];
-#endif
-static char* mediatype[MAX_ETH16I_CARDS];
-static int debug = -1;
-
-MODULE_AUTHOR("Mika Kuoppala <miku@iki.fi>");
-MODULE_DESCRIPTION("ICL EtherTeam 16i/32 driver");
-MODULE_LICENSE("GPL");
-
-
-module_param_array(io, int, NULL, 0);
-MODULE_PARM_DESC(io, "eth16i I/O base address(es)");
-
-#if 0
-module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(irq, "eth16i interrupt request number");
-#endif
-
-module_param_array(mediatype, charp, NULL, 0);
-MODULE_PARM_DESC(mediatype, "eth16i media type of interface(s) (bnc,tp,dix,auto,eprom)");
-
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "eth16i debug level (0-6)");
-
-int __init init_module(void)
-{
- int this_dev, found = 0;
- struct net_device *dev;
-
- for (this_dev = 0; this_dev < MAX_ETH16I_CARDS; this_dev++) {
- dev = alloc_etherdev(sizeof(struct eth16i_local));
- if (!dev)
- break;
-
- dev->base_addr = io[this_dev];
-
- if(debug != -1)
- eth16i_debug = debug;
-
- if(eth16i_debug > 1)
- printk(KERN_NOTICE "eth16i(%d): interface type %s\n", this_dev, mediatype[this_dev] ? mediatype[this_dev] : "none" );
-
- dev->if_port = eth16i_parse_mediatype(mediatype[this_dev]);
-
- if(io[this_dev] == 0) {
- if (this_dev != 0) { /* Only autoprobe 1st one */
- free_netdev(dev);
- break;
- }
-
- printk(KERN_NOTICE "eth16i.c: Presently autoprobing (not recommended) for a single card.\n");
- }
-
- if (do_eth16i_probe(dev) == 0) {
- dev_eth16i[found++] = dev;
- continue;
- }
- printk(KERN_WARNING "eth16i.c No Eth16i card found (i/o = 0x%x).\n",
- io[this_dev]);
- free_netdev(dev);
- break;
- }
- if (found)
- return 0;
- return -ENXIO;
-}
-
-void __exit cleanup_module(void)
-{
- int this_dev;
-
- for(this_dev = 0; this_dev < MAX_ETH16I_CARDS; this_dev++) {
- struct net_device *dev = dev_eth16i[this_dev];
-
- if (netdev_priv(dev)) {
- unregister_netdev(dev);
- free_irq(dev->irq, dev);
- release_region(dev->base_addr, ETH16I_IO_EXTENT);
- free_netdev(dev);
- }
- }
-}
-#endif /* MODULE */
projects / platform / kernel / linux-exynos.git / commitdiff