void dcache_disable(void) {
#ifdef XILINX_USE_DCACHE
-#ifdef XILINX_DCACHE_BYTE_SIZE
flush_cache(0, XILINX_DCACHE_BYTE_SIZE);
-#else
-#warning please rebuild BSPs and update configuration
- flush_cache(0, 32768);
-#endif
#endif
MSRCLR(0x80);
}
rsubi r8, r10, 0x26
sh r6, r0, r8
+ /* Flush cache before enable cache */
+ addik r5, r0, 0
+ addik r6, r0, XILINX_DCACHE_BYTE_SIZE
+flush: bralid r15, flush_cache
+ nop
+
/* enable instruction and data cache */
mfs r12, rmsr
ori r12, r12, 0xa0
.data ALIGN(0x4):
{
__data_start = .;
+#ifdef CONFIG_OF_EMBED
dts/libdts.o (.data)
+#endif
*(.data)
__data_end = .;
}
#define ext2_find_first_zero_bit(addr, size) \
ext2_find_next_zero_bit((addr), (size), 0)
-extern __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
+static inline unsigned long ext2_find_next_zero_bit(void *addr,
+ unsigned long size, unsigned long offset)
{
unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
unsigned long result = offset & ~31UL;
#ifdef __GNUC__
-/* This is effectively a dupe of the arch-independent byteswap
- code in include/linux/byteorder/swab.h, however we force a cast
- of the result up to 32 bits. This in turn forces the compiler
- to explicitly clear the high 16 bits, which it wasn't doing otherwise.
-
- I think this is a symptom of a bug in mb-gcc. JW 20040303
-*/
-
-
-static __inline__ __u16 ___arch__swab16 (__u16 half_word)
-{
- /* 32 bit temp to cast result, forcing clearing of high word */
- __u32 temp;
-
- temp = ((half_word & 0x00FFU) << 8) | ((half_word & 0xFF00U) >> 8);
-
- return (__u16) temp;
-}
-
-#define __arch__swab16(x) ___arch__swab16(x)
-
-/* Microblaze has no arch-specific endian conversion insns */
-
#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
# define __BYTEORDER_HAS_U64__
# define __SWAB_64_THRU_32__
#ifndef __MICROBLAZE_POSIX_TYPES_H__
#define __MICROBLAZE_POSIX_TYPES_H__
-#include <asm/bitops.h>
-
-
typedef unsigned int __kernel_dev_t;
typedef unsigned long __kernel_ino_t;
typedef unsigned long long __kernel_ino64_t;
#endif
#ifdef XILINX_USE_DCACHE
-#ifdef XILINX_DCACHE_BYTE_SIZE
flush_cache(0, XILINX_DCACHE_BYTE_SIZE);
-#else
-#warning please rebuild BSPs and update configuration
- flush_cache(0, 32768);
-#endif
#endif
/*
* Linux Kernel Parameters (passing device tree):
+++ /dev/null
-/*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __ASM_STATUS_LED_H__
-#define __ASM_STATUS_LED_H__
-
-typedef unsigned led_id_t;
-extern void __led_init (led_id_t mask, int state);
-extern void __led_set (led_id_t mask, int state);
-inline void __led_toggle (led_id_t mask);
-
-#endif /* __ASM_STATUS_LED_H__ */
int i;
int rcode = 0;
- if (cmd_items > CONFIG_SYS_MAXARGS) {
- printf("%s: cmd_items %d exceeds hardcoded limit %d."
- " Recompile with higher CONFIG_SYS_MAXARGS?\n",
- __func__, cmd_items, CONFIG_SYS_MAXARGS);
- return -1;
- }
-
if (argc == 1) { /*show list of commands */
- cmd_tbl_t *cmd_array[CONFIG_SYS_MAXARGS];
+ cmd_tbl_t *cmd_array[cmd_items];
int i, j, swaps;
/* Make array of commands from .uboot_cmd section */
*----------------------------------------------------------------------*/
#define CONFIG_SYS_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */
#define CONFIG_STATUS_LED /* Enable status driver */
+#define CONFIG_BOARD_SPECIFIC_LED
#define STATUS_LED_BIT 1 /* Bit-0 on PIO */
#define STATUS_LED_STATE 1 /* Blinking */
# undef CONFIG_DCACHE
#endif
+#ifndef XILINX_DCACHE_BYTE_SIZE
+#define XILINX_DCACHE_BYTE_SIZE 32768
+#endif
+
/*
* BOOTP options
*/
#define CONFIG_SYS_ALTERA_PIO_GPIO_NUM LED_PIO_WIDTH
#define CONFIG_STATUS_LED /* Enable status driver */
+#define CONFIG_BOARD_SPECIFIC_LED
#define CONFIG_GPIO_LED /* Enable GPIO LED driver */
#define CONFIG_GPIO /* Enable GPIO driver */
#ifndef __NIOS2_H__
#define __NIOS2_H__
-#include <linux/stringify.h>
-
/*------------------------------------------------------------------------
* Control registers -- use with wrctl() & rdctl()
*----------------------------------------------------------------------*/
* Access to control regs
*----------------------------------------------------------------------*/
-#define rdctl(reg)\
- ({unsigned int val;\
- asm volatile("rdctl %0, ctl" __stringify(reg) \
- : "=r" (val) ); val;})
-
-#define wrctl(reg,val)\
- asm volatile( "wrctl ctl" _str_(reg) ",%0"\
- : : "r" (val))
+#define rdctl(reg) __builtin_rdctl(reg)
+#define wrctl(reg, val) __builtin_wrctl(reg, val)
/*------------------------------------------------------------------------
* Control reg bit masks
#elif defined(CONFIG_STXXTC)
/* XXX empty just to avoid the error */
/************************************************************************/
-#elif defined(CONFIG_NIOS2)
-/* XXX empty just to avoid the error */
-/************************************************************************/
#elif defined(CONFIG_V38B)
# define STATUS_LED_BIT 0x0010 /* Timer7 GPIO */