endif # APM
-source "arch/x86/kernel/cpu/cpufreq/Kconfig"
+source "drivers/cpufreq/Kconfig"
source "drivers/cpuidle/Kconfig"
obj-$(CONFIG_X86_MCE) += mcheck/
obj-$(CONFIG_MTRR) += mtrr/
-obj-$(CONFIG_CPU_FREQ) += cpufreq/
obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o
+++ /dev/null
-# Link order matters. K8 is preferred to ACPI because of firmware bugs in early
-# K8 systems. ACPI is preferred to all other hardware-specific drivers.
-# speedstep-* is preferred over p4-clockmod.
-
-obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o mperf.o
-obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o mperf.o
-obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o
-obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o
-obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o
-obj-$(CONFIG_X86_LONGHAUL) += longhaul.o
-obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o
-obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o
-obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o
-obj-$(CONFIG_X86_LONGRUN) += longrun.o
-obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o
-obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o
-obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o
-obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o
-obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
-obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
-obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o
+menu "CPU Frequency scaling"
+
config CPU_FREQ
bool "CPU Frequency scaling"
help
If in doubt, say N.
-endif # CPU_FREQ
+menu "x86 CPU frequency scaling drivers"
+depends on X86
+source "drivers/cpufreq/Kconfig.x86"
+endmenu
+
+endif
+endmenu
#
-# CPU Frequency scaling
+# x86 CPU Frequency scaling drivers
#
-menu "CPU Frequency scaling"
-
-source "drivers/cpufreq/Kconfig"
-
-if CPU_FREQ
-
-comment "CPUFreq processor drivers"
-
config X86_PCC_CPUFREQ
tristate "Processor Clocking Control interface driver"
depends on ACPI && ACPI_PROCESSOR
option lets the probing code bypass some of those checks if the
parameter "relaxed_check=1" is passed to the module.
-endif # CPU_FREQ
-
-endmenu
# CPUfreq cross-arch helpers
obj-$(CONFIG_CPU_FREQ_TABLE) += freq_table.o
+##################################################################################d
+# x86 drivers.
+# Link order matters. K8 is preferred to ACPI because of firmware bugs in early
+# K8 systems. ACPI is preferred to all other hardware-specific drivers.
+# speedstep-* is preferred over p4-clockmod.
+
+obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o mperf.o
+obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o mperf.o
+obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o
+obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o
+obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o
+obj-$(CONFIG_X86_LONGHAUL) += longhaul.o
+obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o
+obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o
+obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o
+obj-$(CONFIG_X86_LONGRUN) += longrun.o
+obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o
+obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o
+obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o
+obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o
+obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
+obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
+obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o
+
+##################################################################################d
+