i2c: OMAP2/3: Fix scll/sclh calculations
authorAaro Koskinen <aaro.koskinen@nokia.com>
Wed, 27 May 2009 14:54:45 +0000 (17:54 +0300)
committerBen Dooks <ben-linux@fluff.org>
Sat, 13 Jun 2009 09:39:25 +0000 (10:39 +0100)
Fix scll/sclh calculations for HS and fast modes. Currently the driver
uses equal (roughly) low/high times which will result in too short
low time.

OMAP3430 TRM gives the following equations:

F/S: tLow  = (scll + 7) * internal_clk
     tHigh = (sclh + 5) * internal_clk
HS:  tLow  = (scll + 7) * fclk
     tHigh = (sclh + 5) * fclk

Furthermore, the I2C specification sets the following minimum values
for HS tLow/tHigh for capacitive bus loads 100 pF (maximum speed 3400)
and 400 pF (maximum speed 1700):

speed tLow tHigh
3400 160 ns 60 ns
1700 320 ns 120 ns

and for F/S:

speed tLow tHigh
400 1300 ns 600 ns
100 4700 ns 4000 ns

By using duty cycles 33/66 (HS, F) and 50/50 (S) we stay above these
minimum values.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
drivers/i2c/busses/i2c-omap.c

index ece0125..a879e4b 100644 (file)
@@ -343,17 +343,28 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 
                /* If configured for High Speed */
                if (dev->speed > 400) {
+                       unsigned long scl;
+
                        /* For first phase of HS mode */
-                       fsscll = internal_clk / (400 * 2) - 6;
-                       fssclh = internal_clk / (400 * 2) - 6;
+                       scl = internal_clk / 400;
+                       fsscll = scl - (scl / 3) - 7;
+                       fssclh = (scl / 3) - 5;
 
                        /* For second phase of HS mode */
-                       hsscll = fclk_rate / (dev->speed * 2) - 6;
-                       hssclh = fclk_rate / (dev->speed * 2) - 6;
+                       scl = fclk_rate / dev->speed;
+                       hsscll = scl - (scl / 3) - 7;
+                       hssclh = (scl / 3) - 5;
+               } else if (dev->speed > 100) {
+                       unsigned long scl;
+
+                       /* Fast mode */
+                       scl = internal_clk / dev->speed;
+                       fsscll = scl - (scl / 3) - 7;
+                       fssclh = (scl / 3) - 5;
                } else {
-                       /* To handle F/S modes */
-                       fsscll = internal_clk / (dev->speed * 2) - 6;
-                       fssclh = internal_clk / (dev->speed * 2) - 6;
+                       /* Standard mode */
+                       fsscll = internal_clk / (dev->speed * 2) - 7;
+                       fssclh = internal_clk / (dev->speed * 2) - 5;
                }
                scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll;
                sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh;