Convert CONFIG_SPL_NAND_RAW_ONLY et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SPL_NAND_RAW_ONLY
   CONFIG_SPL_NAND_SOFTECC

Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/README b/README
index 484a2c5..0fd92cf 100644 (file)
--- a/README
+++ b/README
@@ -1743,10 +1743,6 @@ The following options need to be configured:
                Support for a lightweight UBI (fastmap) scanner and
                loader
 
-               CONFIG_SPL_NAND_RAW_ONLY
-               Support to boot only raw u-boot.bin images. Use this only
-               if you need to save space.
-
                CONFIG_SPL_COMMON_INIT_DDR
                Set for common ddr init with serial presence detect in
                SPL binary.

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 4268121..b45607b 100644 (file)
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -763,13 +763,23 @@ config SPL_NAND_SUPPORT
          This enables the drivers in drivers/mtd/nand/raw as part of an SPL
          build.
 
+config SPL_NAND_RAW_ONLY
+       bool "Support to boot only raw u-boot.bin images"
+       depends on SPL_NAND_SUPPORT
+       help
+         Use this only if you need to save space.
+
 config SPL_NAND_DRIVERS
        bool "Use standard NAND driver"
        help
          SPL uses normal NAND drivers, not minimal drivers.
 
 config SPL_NAND_ECC
-       bool "Include standard software ECC in the SPL"
+       bool "Include standard ECC in SPL"
+
+config SPL_NAND_SOFTECC
+       bool "Use software ECC in SPL"
+       depends on SPL_NAND_ECC
 
 config SPL_NAND_SIMPLE
        bool "Support simple NAND drivers in SPL"

diff --git a/configs/axm_defconfig b/configs/axm_defconfig
index d17cdd2..ebda5a4 100644 (file)
--- a/configs/axm_defconfig
+++ b/configs/axm_defconfig
@@ -39,8 +39,10 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_CRC32=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_RAW_ONLY=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
+CONFIG_SPL_NAND_SOFTECC=y
 CONFIG_SPL_NAND_BASE=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_HUSH_PARSER=y

diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig
index 443f15e..9b55d9e 100644 (file)
--- a/configs/corvus_defconfig
+++ b/configs/corvus_defconfig
@@ -32,8 +32,10 @@ CONFIG_BOOTCOMMAND="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_RAW_ONLY=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
+CONFIG_SPL_NAND_SOFTECC=y
 CONFIG_SPL_NAND_BASE=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "

diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
index 71e80e8..5b25463 100644 (file)
--- a/configs/devkit3250_defconfig
+++ b/configs/devkit3250_defconfig
@@ -26,8 +26,10 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_RAW_ONLY=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
+CONFIG_SPL_NAND_SOFTECC=y
 CONFIG_SPL_NAND_SIMPLE=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GPIO=y

diff --git a/configs/gardena-smart-gateway-at91sam_defconfig b/configs/gardena-smart-gateway-at91sam_defconfig
index 0dbd084..2ee7163 100644 (file)
--- a/configs/gardena-smart-gateway-at91sam_defconfig
+++ b/configs/gardena-smart-gateway-at91sam_defconfig
@@ -35,6 +35,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_RAW_ONLY=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_BASE=y
 CONFIG_HUSH_PARSER=y

diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig
index a9f90e9..b3c6d23 100644 (file)
--- a/configs/smartweb_defconfig
+++ b/configs/smartweb_defconfig
@@ -33,8 +33,10 @@ CONFIG_BOOTCOMMAND="run flashboot"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_RAW_ONLY=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
+CONFIG_SPL_NAND_SOFTECC=y
 CONFIG_SPL_NAND_BASE=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot# "

diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig
index 90f9133..8bc5afd 100644 (file)
--- a/configs/taurus_defconfig
+++ b/configs/taurus_defconfig
@@ -43,8 +43,10 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_CRC32=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_RAW_ONLY=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
+CONFIG_SPL_NAND_SOFTECC=y
 CONFIG_SPL_NAND_BASE=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_HUSH_PARSER=y

diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 38b9061..2930d7a 100644 (file)
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -56,7 +56,6 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
 
 #elif CONFIG_NAND_BOOT
-#define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    0x80000
 
 #define CONFIG_SYS_NAND_ECCSIZE                256

diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 4809b59..b4fef73 100644 (file)
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -63,8 +63,6 @@
 #define CONFIG_SPL_BSS_START_ADDR      CONFIG_SPL_MAX_SIZE
 #define CONFIG_SPL_BSS_MAX_SIZE                (SZ_2K)
 
-#define CONFIG_SPL_NAND_RAW_ONLY
-#define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    0x80000
 #define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE

diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index 93a704c..d2a760e 100644 (file)
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -97,11 +97,6 @@
 
 /* SPL will use serial */
 
-/* SPL loads an image from NAND */
-#define CONFIG_SPL_NAND_RAW_ONLY
-
-#define CONFIG_SPL_NAND_SOFTECC
-
 #define CONFIG_SPL_MAX_SIZE            0x20000
 #define CONFIG_SPL_PAD_TO              CONFIG_SPL_MAX_SIZE
 

diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h
index 5e6a8ee..3e99d2c 100644 (file)
--- a/include/configs/gardena-smart-gateway-at91sam.h
+++ b/include/configs/gardena-smart-gateway-at91sam.h
@@ -51,7 +51,6 @@
 #define CONFIG_SYS_MCKR                        0x1301
 #define CONFIG_SYS_MCKR_CSS            0x1302
 
-#define CONFIG_SPL_NAND_RAW_ONLY
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    0xa0000
 #define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE

diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index b858aaa..658b8a7 100644 (file)
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -61,7 +61,6 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
 
 #elif CONFIG_NAND_BOOT
-#define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    0x80000
 
 #define CONFIG_SYS_NAND_ECCSIZE                256

diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index b51a520..d58d76d 100644 (file)
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -126,8 +126,6 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
 
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
-#define CONFIG_SPL_NAND_RAW_ONLY
-#define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    SZ_512K
 #define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE

diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index 77d80bf..768bfc6 100644 (file)
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -152,8 +152,6 @@
 #define CONFIG_SPL_BSS_MAX_SIZE                (3 * SZ_512)
 
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
-#define CONFIG_SPL_NAND_RAW_ONLY
-#define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    SZ_512K
 #define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE