clk_mgr->base.clks.max_supported_dppclk_khz = new_clocks->max_supported_dppclk_khz;
}
-static int get_active_display_cnt(
- struct dc *dc,
- struct dc_state *context)
-{
- int i, display_count;
-
- display_count = 0;
- for (i = 0; i < context->stream_count; i++) {
- const struct dc_stream_state *stream = context->streams[i];
-
- /*
- * Only notify active stream or virtual stream.
- * Need to notify virtual stream to work around
- * headless case. HPD does not fire when system is in
- * S0i2.
- */
- if (!stream->dpms_off || stream->signal == SIGNAL_TYPE_VIRTUAL)
- display_count++;
- }
-
- return display_count;
-}
-
static void rv1_update_clocks(struct clk_mgr *clk_mgr_base,
struct dc_state *context,
bool safe_to_lower)
pp_smu = &clk_mgr->pp_smu->rv_funcs;
- display_count = get_active_display_cnt(dc, context);
+ display_count = clk_mgr_helper_get_active_display_cnt(dc, context);
if (display_count == 0)
enter_display_off = true;
#define VBIOSSMC_MSG_SetDispclkFreq 0x4
#define VBIOSSMC_MSG_SetDprefclkFreq 0x5
-int rv1_vbios_smu_set_dispclk(struct clk_mgr_internal *clk_mgr, int requested_dispclk_khz)
+int rv1_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr, unsigned int msg_id, unsigned int param)
{
-
- int actual_dispclk_set_khz = -1;
- struct dc *core_dc = clk_mgr->base.ctx->dc;
- struct dmcu *dmcu = core_dc->res_pool->dmcu;
-
/* First clear response register */
- //dm_write_reg(ctx, mmMP1_SMN_C2PMSG_91, 0);
REG_WRITE(MP1_SMN_C2PMSG_91, 0);
/* Set the parameter register for the SMU message, unit is Mhz */
- //dm_write_reg(ctx, mmMP1_SMN_C2PMSG_83, requested_dispclk_khz / 1000);
- REG_WRITE(MP1_SMN_C2PMSG_83, requested_dispclk_khz / 1000);
+ REG_WRITE(MP1_SMN_C2PMSG_83, param);
/* Trigger the message transaction by writing the message ID */
- //dm_write_reg(ctx, mmMP1_SMN_C2PMSG_67, VBIOSSMC_MSG_SetDispclkFreq);
- REG_WRITE(MP1_SMN_C2PMSG_67, VBIOSSMC_MSG_SetDispclkFreq);
+ REG_WRITE(MP1_SMN_C2PMSG_67, msg_id);
REG_WAIT(MP1_SMN_C2PMSG_91, CONTENT, 1, 10, 200000);
/* Actual dispclk set is returned in the parameter register */
- actual_dispclk_set_khz = REG_READ(MP1_SMN_C2PMSG_83) * 1000;
+ return REG_READ(MP1_SMN_C2PMSG_83);
+}
+
+int rv1_vbios_smu_set_dispclk(struct clk_mgr_internal *clk_mgr, int requested_dispclk_khz)
+{
+ int actual_dispclk_set_mhz = -1;
+ struct dc *core_dc = clk_mgr->base.ctx->dc;
+ struct dmcu *dmcu = core_dc->res_pool->dmcu;
+
+ /* Unit of SMU msg parameter is Mhz */
+ actual_dispclk_set_mhz = rv1_vbios_smu_send_msg_with_param(
+ clk_mgr,
+ VBIOSSMC_MSG_SetDispclkFreq,
+ requested_dispclk_khz / 1000);
+
+ /* Actual dispclk set is returned in the parameter register */
+ actual_dispclk_set_mhz = REG_READ(MP1_SMN_C2PMSG_83) * 1000;
if (!IS_FPGA_MAXIMUS_DC(core_dc->ctx->dce_environment)) {
if (dmcu && dmcu->funcs->is_dmcu_initialized(dmcu)) {
- if (clk_mgr->dfs_bypass_disp_clk != actual_dispclk_set_khz)
+ if (clk_mgr->dfs_bypass_disp_clk != actual_dispclk_set_mhz)
dmcu->funcs->set_psr_wait_loop(dmcu,
- actual_dispclk_set_khz / 1000 / 7);
+ actual_dispclk_set_mhz / 7);
}
}
- return actual_dispclk_set_khz;
+ return actual_dispclk_set_mhz * 1000;
}
int rv1_vbios_smu_set_dprefclk(struct clk_mgr_internal *clk_mgr)
{
- int actual_dprefclk_set_khz = -1;
-
- REG_WRITE(MP1_SMN_C2PMSG_91, 0);
-
- /* Set the parameter register for the SMU message */
- REG_WRITE(MP1_SMN_C2PMSG_83, clk_mgr->base.dprefclk_khz / 1000);
+ int actual_dprefclk_set_mhz = -1;
- /* Trigger the message transaction by writing the message ID */
- REG_WRITE(MP1_SMN_C2PMSG_67, VBIOSSMC_MSG_SetDprefclkFreq);
-
- /* Wait for SMU response */
- REG_WAIT(MP1_SMN_C2PMSG_91, CONTENT, 1, 10, 200000);
+ actual_dprefclk_set_mhz = rv1_vbios_smu_send_msg_with_param(
+ clk_mgr,
+ VBIOSSMC_MSG_SetDprefclkFreq,
+ clk_mgr->base.dprefclk_khz / 1000);
- actual_dprefclk_set_khz = REG_READ(MP1_SMN_C2PMSG_83) * 1000;
+ /* TODO: add code for programing DP DTO, currently this is down by command table */
- return actual_dprefclk_set_khz;
+ return actual_dprefclk_set_mhz * 1000;
}