--- /dev/null
+#!/usr/bin/python
+#
+# Copyright (c) 2009 Google Inc. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above
+# copyright notice, this list of conditions and the following disclaimer
+# in the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Google Inc. nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""Does google-lint on c++ files.
+
+The goal of this script is to identify places in the code that *may*
+be in non-compliance with google style. It does not attempt to fix
+up these problems -- the point is to educate. It does also not
+attempt to find all problems, or to ensure that everything it does
+find is legitimately a problem.
+
+In particular, we can get very confused by /* and // inside strings!
+We do a small hack, which is to ignore //'s with "'s after them on the
+same line, but it is far from perfect (in either direction).
+"""
+
+import codecs
+import copy
+import getopt
+import math # for log
+import os
+import re
+import sre_compile
+import string
+import sys
+import unicodedata
+
+
+_USAGE = """
+Syntax: cpplint.py [--verbose=#] [--output=vs7] [--filter=-x,+y,...]
+ [--counting=total|toplevel|detailed] [--root=subdir]
+ [--linelength=digits]
+ <file> [file] ...
+
+ The style guidelines this tries to follow are those in
+ http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml
+
+ Every problem is given a confidence score from 1-5, with 5 meaning we are
+ certain of the problem, and 1 meaning it could be a legitimate construct.
+ This will miss some errors, and is not a substitute for a code review.
+
+ To suppress false-positive errors of a certain category, add a
+ 'NOLINT(category)' comment to the line. NOLINT or NOLINT(*)
+ suppresses errors of all categories on that line.
+
+ The files passed in will be linted; at least one file must be provided.
+ Default linted extensions are .cc, .cpp, .cu, .cuh and .h. Change the
+ extensions with the --extensions flag.
+
+ Flags:
+
+ output=vs7
+ By default, the output is formatted to ease emacs parsing. Visual Studio
+ compatible output (vs7) may also be used. Other formats are unsupported.
+
+ verbose=#
+ Specify a number 0-5 to restrict errors to certain verbosity levels.
+
+ filter=-x,+y,...
+ Specify a comma-separated list of category-filters to apply: only
+ error messages whose category names pass the filters will be printed.
+ (Category names are printed with the message and look like
+ "[whitespace/indent]".) Filters are evaluated left to right.
+ "-FOO" and "FOO" means "do not print categories that start with FOO".
+ "+FOO" means "do print categories that start with FOO".
+
+ Examples: --filter=-whitespace,+whitespace/braces
+ --filter=whitespace,runtime/printf,+runtime/printf_format
+ --filter=-,+build/include_what_you_use
+
+ To see a list of all the categories used in cpplint, pass no arg:
+ --filter=
+
+ counting=total|toplevel|detailed
+ The total number of errors found is always printed. If
+ 'toplevel' is provided, then the count of errors in each of
+ the top-level categories like 'build' and 'whitespace' will
+ also be printed. If 'detailed' is provided, then a count
+ is provided for each category like 'build/class'.
+
+ root=subdir
+ The root directory used for deriving header guard CPP variable.
+ By default, the header guard CPP variable is calculated as the relative
+ path to the directory that contains .git, .hg, or .svn. When this flag
+ is specified, the relative path is calculated from the specified
+ directory. If the specified directory does not exist, this flag is
+ ignored.
+
+ Examples:
+ Assuing that src/.git exists, the header guard CPP variables for
+ src/chrome/browser/ui/browser.h are:
+
+ No flag => CHROME_BROWSER_UI_BROWSER_H_
+ --root=chrome => BROWSER_UI_BROWSER_H_
+ --root=chrome/browser => UI_BROWSER_H_
+
+ linelength=digits
+ This is the allowed line length for the project. The default value is
+ 80 characters.
+
+ Examples:
+ --linelength=120
+
+ extensions=extension,extension,...
+ The allowed file extensions that cpplint will check
+
+ Examples:
+ --extensions=hpp,cpp
+"""
+
+# We categorize each error message we print. Here are the categories.
+# We want an explicit list so we can list them all in cpplint --filter=.
+# If you add a new error message with a new category, add it to the list
+# here! cpplint_unittest.py should tell you if you forget to do this.
+_ERROR_CATEGORIES = [
+ 'build/class',
+ 'build/deprecated',
+ 'build/endif_comment',
+ 'build/explicit_make_pair',
+ 'build/forward_decl',
+ 'build/header_guard',
+ 'build/include',
+ 'build/include_alpha',
+ 'build/include_order',
+ 'build/include_what_you_use',
+ 'build/namespaces',
+ 'build/printf_format',
+ 'build/storage_class',
+ 'legal/copyright',
+ 'readability/alt_tokens',
+ 'readability/braces',
+ 'readability/casting',
+ 'readability/check',
+ 'readability/constructors',
+ 'readability/fn_size',
+ 'readability/function',
+ 'readability/multiline_comment',
+ 'readability/multiline_string',
+ 'readability/namespace',
+ 'readability/nolint',
+ 'readability/nul',
+ 'readability/streams',
+ 'readability/todo',
+ 'readability/utf8',
+ 'runtime/arrays',
+ 'runtime/casting',
+ 'runtime/explicit',
+ 'runtime/int',
+ 'runtime/init',
+ 'runtime/invalid_increment',
+ 'runtime/member_string_references',
+ 'runtime/memset',
+ 'runtime/operator',
+ 'runtime/printf',
+ 'runtime/printf_format',
+ 'runtime/references',
+ 'runtime/string',
+ 'runtime/threadsafe_fn',
+ 'runtime/vlog',
+ 'whitespace/blank_line',
+ 'whitespace/braces',
+ 'whitespace/comma',
+ 'whitespace/comments',
+ 'whitespace/empty_conditional_body',
+ 'whitespace/empty_loop_body',
+ 'whitespace/end_of_line',
+ 'whitespace/ending_newline',
+ 'whitespace/forcolon',
+ 'whitespace/indent',
+ 'whitespace/line_length',
+ 'whitespace/newline',
+ 'whitespace/operators',
+ 'whitespace/parens',
+ 'whitespace/semicolon',
+ 'whitespace/tab',
+ 'whitespace/todo'
+ ]
+
+# The default state of the category filter. This is overrided by the --filter=
+# flag. By default all errors are on, so only add here categories that should be
+# off by default (i.e., categories that must be enabled by the --filter= flags).
+# All entries here should start with a '-' or '+', as in the --filter= flag.
+_DEFAULT_FILTERS = ['-build/include_alpha']
+
+# We used to check for high-bit characters, but after much discussion we
+# decided those were OK, as long as they were in UTF-8 and didn't represent
+# hard-coded international strings, which belong in a separate i18n file.
+
+
+# C++ headers
+_CPP_HEADERS = frozenset([
+ # Legacy
+ 'algobase.h',
+ 'algo.h',
+ 'alloc.h',
+ 'builtinbuf.h',
+ 'bvector.h',
+ 'complex.h',
+ 'defalloc.h',
+ 'deque.h',
+ 'editbuf.h',
+ 'fstream.h',
+ 'function.h',
+ 'hash_map',
+ 'hash_map.h',
+ 'hash_set',
+ 'hash_set.h',
+ 'hashtable.h',
+ 'heap.h',
+ 'indstream.h',
+ 'iomanip.h',
+ 'iostream.h',
+ 'istream.h',
+ 'iterator.h',
+ 'list.h',
+ 'map.h',
+ 'multimap.h',
+ 'multiset.h',
+ 'ostream.h',
+ 'pair.h',
+ 'parsestream.h',
+ 'pfstream.h',
+ 'procbuf.h',
+ 'pthread_alloc',
+ 'pthread_alloc.h',
+ 'rope',
+ 'rope.h',
+ 'ropeimpl.h',
+ 'set.h',
+ 'slist',
+ 'slist.h',
+ 'stack.h',
+ 'stdiostream.h',
+ 'stl_alloc.h',
+ 'stl_relops.h',
+ 'streambuf.h',
+ 'stream.h',
+ 'strfile.h',
+ 'strstream.h',
+ 'tempbuf.h',
+ 'tree.h',
+ 'type_traits.h',
+ 'vector.h',
+ # 17.6.1.2 C++ library headers
+ 'algorithm',
+ 'array',
+ 'atomic',
+ 'bitset',
+ 'chrono',
+ 'codecvt',
+ 'complex',
+ 'condition_variable',
+ 'deque',
+ 'exception',
+ 'forward_list',
+ 'fstream',
+ 'functional',
+ 'future',
+ 'initializer_list',
+ 'iomanip',
+ 'ios',
+ 'iosfwd',
+ 'iostream',
+ 'istream',
+ 'iterator',
+ 'limits',
+ 'list',
+ 'locale',
+ 'map',
+ 'memory',
+ 'mutex',
+ 'new',
+ 'numeric',
+ 'ostream',
+ 'queue',
+ 'random',
+ 'ratio',
+ 'regex',
+ 'set',
+ 'sstream',
+ 'stack',
+ 'stdexcept',
+ 'streambuf',
+ 'string',
+ 'strstream',
+ 'system_error',
+ 'thread',
+ 'tuple',
+ 'typeindex',
+ 'typeinfo',
+ 'type_traits',
+ 'unordered_map',
+ 'unordered_set',
+ 'utility',
+ 'valarray',
+ 'vector',
+ # 17.6.1.2 C++ headers for C library facilities
+ 'cassert',
+ 'ccomplex',
+ 'cctype',
+ 'cerrno',
+ 'cfenv',
+ 'cfloat',
+ 'cinttypes',
+ 'ciso646',
+ 'climits',
+ 'clocale',
+ 'cmath',
+ 'csetjmp',
+ 'csignal',
+ 'cstdalign',
+ 'cstdarg',
+ 'cstdbool',
+ 'cstddef',
+ 'cstdint',
+ 'cstdio',
+ 'cstdlib',
+ 'cstring',
+ 'ctgmath',
+ 'ctime',
+ 'cuchar',
+ 'cwchar',
+ 'cwctype',
+ ])
+
+# Assertion macros. These are defined in base/logging.h and
+# testing/base/gunit.h. Note that the _M versions need to come first
+# for substring matching to work.
+_CHECK_MACROS = [
+ 'DCHECK', 'CHECK',
+ 'EXPECT_TRUE_M', 'EXPECT_TRUE',
+ 'ASSERT_TRUE_M', 'ASSERT_TRUE',
+ 'EXPECT_FALSE_M', 'EXPECT_FALSE',
+ 'ASSERT_FALSE_M', 'ASSERT_FALSE',
+ ]
+
+# Replacement macros for CHECK/DCHECK/EXPECT_TRUE/EXPECT_FALSE
+_CHECK_REPLACEMENT = dict([(m, {}) for m in _CHECK_MACROS])
+
+for op, replacement in [('==', 'EQ'), ('!=', 'NE'),
+ ('>=', 'GE'), ('>', 'GT'),
+ ('<=', 'LE'), ('<', 'LT')]:
+ _CHECK_REPLACEMENT['DCHECK'][op] = 'DCHECK_%s' % replacement
+ _CHECK_REPLACEMENT['CHECK'][op] = 'CHECK_%s' % replacement
+ _CHECK_REPLACEMENT['EXPECT_TRUE'][op] = 'EXPECT_%s' % replacement
+ _CHECK_REPLACEMENT['ASSERT_TRUE'][op] = 'ASSERT_%s' % replacement
+ _CHECK_REPLACEMENT['EXPECT_TRUE_M'][op] = 'EXPECT_%s_M' % replacement
+ _CHECK_REPLACEMENT['ASSERT_TRUE_M'][op] = 'ASSERT_%s_M' % replacement
+
+for op, inv_replacement in [('==', 'NE'), ('!=', 'EQ'),
+ ('>=', 'LT'), ('>', 'LE'),
+ ('<=', 'GT'), ('<', 'GE')]:
+ _CHECK_REPLACEMENT['EXPECT_FALSE'][op] = 'EXPECT_%s' % inv_replacement
+ _CHECK_REPLACEMENT['ASSERT_FALSE'][op] = 'ASSERT_%s' % inv_replacement
+ _CHECK_REPLACEMENT['EXPECT_FALSE_M'][op] = 'EXPECT_%s_M' % inv_replacement
+ _CHECK_REPLACEMENT['ASSERT_FALSE_M'][op] = 'ASSERT_%s_M' % inv_replacement
+
+# Alternative tokens and their replacements. For full list, see section 2.5
+# Alternative tokens [lex.digraph] in the C++ standard.
+#
+# Digraphs (such as '%:') are not included here since it's a mess to
+# match those on a word boundary.
+_ALT_TOKEN_REPLACEMENT = {
+ 'and': '&&',
+ 'bitor': '|',
+ 'or': '||',
+ 'xor': '^',
+ 'compl': '~',
+ 'bitand': '&',
+ 'and_eq': '&=',
+ 'or_eq': '|=',
+ 'xor_eq': '^=',
+ 'not': '!',
+ 'not_eq': '!='
+ }
+
+# Compile regular expression that matches all the above keywords. The "[ =()]"
+# bit is meant to avoid matching these keywords outside of boolean expressions.
+#
+# False positives include C-style multi-line comments and multi-line strings
+# but those have always been troublesome for cpplint.
+_ALT_TOKEN_REPLACEMENT_PATTERN = re.compile(
+ r'[ =()](' + ('|'.join(_ALT_TOKEN_REPLACEMENT.keys())) + r')(?=[ (]|$)')
+
+
+# These constants define types of headers for use with
+# _IncludeState.CheckNextIncludeOrder().
+_C_SYS_HEADER = 1
+_CPP_SYS_HEADER = 2
+_LIKELY_MY_HEADER = 3
+_POSSIBLE_MY_HEADER = 4
+_OTHER_HEADER = 5
+
+# These constants define the current inline assembly state
+_NO_ASM = 0 # Outside of inline assembly block
+_INSIDE_ASM = 1 # Inside inline assembly block
+_END_ASM = 2 # Last line of inline assembly block
+_BLOCK_ASM = 3 # The whole block is an inline assembly block
+
+# Match start of assembly blocks
+_MATCH_ASM = re.compile(r'^\s*(?:asm|_asm|__asm|__asm__)'
+ r'(?:\s+(volatile|__volatile__))?'
+ r'\s*[{(]')
+
+
+_regexp_compile_cache = {}
+
+# Finds occurrences of NOLINT or NOLINT(...).
+_RE_SUPPRESSION = re.compile(r'\bNOLINT\b(\([^)]*\))?')
+
+# {str, set(int)}: a map from error categories to sets of linenumbers
+# on which those errors are expected and should be suppressed.
+_error_suppressions = {}
+
+# The root directory used for deriving header guard CPP variable.
+# This is set by --root flag.
+_root = None
+
+# The allowed line length of files.
+# This is set by --linelength flag.
+_line_length = 80
+
+# The allowed extensions for file names
+# This is set by --extensions flag.
+_valid_extensions = set(['cc', 'h', 'cpp', 'cu', 'cuh'])
+
+def ParseNolintSuppressions(filename, raw_line, linenum, error):
+ """Updates the global list of error-suppressions.
+
+ Parses any NOLINT comments on the current line, updating the global
+ error_suppressions store. Reports an error if the NOLINT comment
+ was malformed.
+
+ Args:
+ filename: str, the name of the input file.
+ raw_line: str, the line of input text, with comments.
+ linenum: int, the number of the current line.
+ error: function, an error handler.
+ """
+ # FIXME(adonovan): "NOLINT(" is misparsed as NOLINT(*).
+ matched = _RE_SUPPRESSION.search(raw_line)
+ if matched:
+ category = matched.group(1)
+ if category in (None, '(*)'): # => "suppress all"
+ _error_suppressions.setdefault(None, set()).add(linenum)
+ else:
+ if category.startswith('(') and category.endswith(')'):
+ category = category[1:-1]
+ if category in _ERROR_CATEGORIES:
+ _error_suppressions.setdefault(category, set()).add(linenum)
+ else:
+ error(filename, linenum, 'readability/nolint', 5,
+ 'Unknown NOLINT error category: %s' % category)
+
+
+def ResetNolintSuppressions():
+ "Resets the set of NOLINT suppressions to empty."
+ _error_suppressions.clear()
+
+
+def IsErrorSuppressedByNolint(category, linenum):
+ """Returns true if the specified error category is suppressed on this line.
+
+ Consults the global error_suppressions map populated by
+ ParseNolintSuppressions/ResetNolintSuppressions.
+
+ Args:
+ category: str, the category of the error.
+ linenum: int, the current line number.
+ Returns:
+ bool, True iff the error should be suppressed due to a NOLINT comment.
+ """
+ return (linenum in _error_suppressions.get(category, set()) or
+ linenum in _error_suppressions.get(None, set()))
+
+def Match(pattern, s):
+ """Matches the string with the pattern, caching the compiled regexp."""
+ # The regexp compilation caching is inlined in both Match and Search for
+ # performance reasons; factoring it out into a separate function turns out
+ # to be noticeably expensive.
+ if pattern not in _regexp_compile_cache:
+ _regexp_compile_cache[pattern] = sre_compile.compile(pattern)
+ return _regexp_compile_cache[pattern].match(s)
+
+
+def ReplaceAll(pattern, rep, s):
+ """Replaces instances of pattern in a string with a replacement.
+
+ The compiled regex is kept in a cache shared by Match and Search.
+
+ Args:
+ pattern: regex pattern
+ rep: replacement text
+ s: search string
+
+ Returns:
+ string with replacements made (or original string if no replacements)
+ """
+ if pattern not in _regexp_compile_cache:
+ _regexp_compile_cache[pattern] = sre_compile.compile(pattern)
+ return _regexp_compile_cache[pattern].sub(rep, s)
+
+
+def Search(pattern, s):
+ """Searches the string for the pattern, caching the compiled regexp."""
+ if pattern not in _regexp_compile_cache:
+ _regexp_compile_cache[pattern] = sre_compile.compile(pattern)
+ return _regexp_compile_cache[pattern].search(s)
+
+
+class _IncludeState(dict):
+ """Tracks line numbers for includes, and the order in which includes appear.
+
+ As a dict, an _IncludeState object serves as a mapping between include
+ filename and line number on which that file was included.
+
+ Call CheckNextIncludeOrder() once for each header in the file, passing
+ in the type constants defined above. Calls in an illegal order will
+ raise an _IncludeError with an appropriate error message.
+
+ """
+ # self._section will move monotonically through this set. If it ever
+ # needs to move backwards, CheckNextIncludeOrder will raise an error.
+ _INITIAL_SECTION = 0
+ _MY_H_SECTION = 1
+ _C_SECTION = 2
+ _CPP_SECTION = 3
+ _OTHER_H_SECTION = 4
+
+ _TYPE_NAMES = {
+ _C_SYS_HEADER: 'C system header',
+ _CPP_SYS_HEADER: 'C++ system header',
+ _LIKELY_MY_HEADER: 'header this file implements',
+ _POSSIBLE_MY_HEADER: 'header this file may implement',
+ _OTHER_HEADER: 'other header',
+ }
+ _SECTION_NAMES = {
+ _INITIAL_SECTION: "... nothing. (This can't be an error.)",
+ _MY_H_SECTION: 'a header this file implements',
+ _C_SECTION: 'C system header',
+ _CPP_SECTION: 'C++ system header',
+ _OTHER_H_SECTION: 'other header',
+ }
+
+ def __init__(self):
+ dict.__init__(self)
+ self.ResetSection()
+
+ def ResetSection(self):
+ # The name of the current section.
+ self._section = self._INITIAL_SECTION
+ # The path of last found header.
+ self._last_header = ''
+
+ def SetLastHeader(self, header_path):
+ self._last_header = header_path
+
+ def CanonicalizeAlphabeticalOrder(self, header_path):
+ """Returns a path canonicalized for alphabetical comparison.
+
+ - replaces "-" with "_" so they both cmp the same.
+ - removes '-inl' since we don't require them to be after the main header.
+ - lowercase everything, just in case.
+
+ Args:
+ header_path: Path to be canonicalized.
+
+ Returns:
+ Canonicalized path.
+ """
+ return header_path.replace('-inl.h', '.h').replace('-', '_').lower()
+
+ def IsInAlphabeticalOrder(self, clean_lines, linenum, header_path):
+ """Check if a header is in alphabetical order with the previous header.
+
+ Args:
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ header_path: Canonicalized header to be checked.
+
+ Returns:
+ Returns true if the header is in alphabetical order.
+ """
+ # If previous section is different from current section, _last_header will
+ # be reset to empty string, so it's always less than current header.
+ #
+ # If previous line was a blank line, assume that the headers are
+ # intentionally sorted the way they are.
+ if (self._last_header > header_path and
+ not Match(r'^\s*$', clean_lines.elided[linenum - 1])):
+ return False
+ return True
+
+ def CheckNextIncludeOrder(self, header_type):
+ """Returns a non-empty error message if the next header is out of order.
+
+ This function also updates the internal state to be ready to check
+ the next include.
+
+ Args:
+ header_type: One of the _XXX_HEADER constants defined above.
+
+ Returns:
+ The empty string if the header is in the right order, or an
+ error message describing what's wrong.
+
+ """
+ error_message = ('Found %s after %s' %
+ (self._TYPE_NAMES[header_type],
+ self._SECTION_NAMES[self._section]))
+
+ last_section = self._section
+
+ if header_type == _C_SYS_HEADER:
+ if self._section <= self._C_SECTION:
+ self._section = self._C_SECTION
+ else:
+ self._last_header = ''
+ return error_message
+ elif header_type == _CPP_SYS_HEADER:
+ if self._section <= self._CPP_SECTION:
+ self._section = self._CPP_SECTION
+ else:
+ self._last_header = ''
+ return error_message
+ elif header_type == _LIKELY_MY_HEADER:
+ if self._section <= self._MY_H_SECTION:
+ self._section = self._MY_H_SECTION
+ else:
+ self._section = self._OTHER_H_SECTION
+ elif header_type == _POSSIBLE_MY_HEADER:
+ if self._section <= self._MY_H_SECTION:
+ self._section = self._MY_H_SECTION
+ else:
+ # This will always be the fallback because we're not sure
+ # enough that the header is associated with this file.
+ self._section = self._OTHER_H_SECTION
+ else:
+ assert header_type == _OTHER_HEADER
+ self._section = self._OTHER_H_SECTION
+
+ if last_section != self._section:
+ self._last_header = ''
+
+ return ''
+
+
+class _CppLintState(object):
+ """Maintains module-wide state.."""
+
+ def __init__(self):
+ self.verbose_level = 1 # global setting.
+ self.error_count = 0 # global count of reported errors
+ # filters to apply when emitting error messages
+ self.filters = _DEFAULT_FILTERS[:]
+ self.counting = 'total' # In what way are we counting errors?
+ self.errors_by_category = {} # string to int dict storing error counts
+
+ # output format:
+ # "emacs" - format that emacs can parse (default)
+ # "vs7" - format that Microsoft Visual Studio 7 can parse
+ self.output_format = 'emacs'
+
+ def SetOutputFormat(self, output_format):
+ """Sets the output format for errors."""
+ self.output_format = output_format
+
+ def SetVerboseLevel(self, level):
+ """Sets the module's verbosity, and returns the previous setting."""
+ last_verbose_level = self.verbose_level
+ self.verbose_level = level
+ return last_verbose_level
+
+ def SetCountingStyle(self, counting_style):
+ """Sets the module's counting options."""
+ self.counting = counting_style
+
+ def SetFilters(self, filters):
+ """Sets the error-message filters.
+
+ These filters are applied when deciding whether to emit a given
+ error message.
+
+ Args:
+ filters: A string of comma-separated filters (eg "+whitespace/indent").
+ Each filter should start with + or -; else we die.
+
+ Raises:
+ ValueError: The comma-separated filters did not all start with '+' or '-'.
+ E.g. "-,+whitespace,-whitespace/indent,whitespace/badfilter"
+ """
+ # Default filters always have less priority than the flag ones.
+ self.filters = _DEFAULT_FILTERS[:]
+ for filt in filters.split(','):
+ clean_filt = filt.strip()
+ if clean_filt:
+ self.filters.append(clean_filt)
+ for filt in self.filters:
+ if not (filt.startswith('+') or filt.startswith('-')):
+ raise ValueError('Every filter in --filters must start with + or -'
+ ' (%s does not)' % filt)
+
+ def ResetErrorCounts(self):
+ """Sets the module's error statistic back to zero."""
+ self.error_count = 0
+ self.errors_by_category = {}
+
+ def IncrementErrorCount(self, category):
+ """Bumps the module's error statistic."""
+ self.error_count += 1
+ if self.counting in ('toplevel', 'detailed'):
+ if self.counting != 'detailed':
+ category = category.split('/')[0]
+ if category not in self.errors_by_category:
+ self.errors_by_category[category] = 0
+ self.errors_by_category[category] += 1
+
+ def PrintErrorCounts(self):
+ """Print a summary of errors by category, and the total."""
+ for category, count in self.errors_by_category.iteritems():
+ sys.stderr.write('Category \'%s\' errors found: %d\n' %
+ (category, count))
+ sys.stderr.write('Total errors found: %d\n' % self.error_count)
+
+_cpplint_state = _CppLintState()
+
+
+def _OutputFormat():
+ """Gets the module's output format."""
+ return _cpplint_state.output_format
+
+
+def _SetOutputFormat(output_format):
+ """Sets the module's output format."""
+ _cpplint_state.SetOutputFormat(output_format)
+
+
+def _VerboseLevel():
+ """Returns the module's verbosity setting."""
+ return _cpplint_state.verbose_level
+
+
+def _SetVerboseLevel(level):
+ """Sets the module's verbosity, and returns the previous setting."""
+ return _cpplint_state.SetVerboseLevel(level)
+
+
+def _SetCountingStyle(level):
+ """Sets the module's counting options."""
+ _cpplint_state.SetCountingStyle(level)
+
+
+def _Filters():
+ """Returns the module's list of output filters, as a list."""
+ return _cpplint_state.filters
+
+
+def _SetFilters(filters):
+ """Sets the module's error-message filters.
+
+ These filters are applied when deciding whether to emit a given
+ error message.
+
+ Args:
+ filters: A string of comma-separated filters (eg "whitespace/indent").
+ Each filter should start with + or -; else we die.
+ """
+ _cpplint_state.SetFilters(filters)
+
+
+class _FunctionState(object):
+ """Tracks current function name and the number of lines in its body."""
+
+ _NORMAL_TRIGGER = 250 # for --v=0, 500 for --v=1, etc.
+ _TEST_TRIGGER = 400 # about 50% more than _NORMAL_TRIGGER.
+
+ def __init__(self):
+ self.in_a_function = False
+ self.lines_in_function = 0
+ self.current_function = ''
+
+ def Begin(self, function_name):
+ """Start analyzing function body.
+
+ Args:
+ function_name: The name of the function being tracked.
+ """
+ self.in_a_function = True
+ self.lines_in_function = 0
+ self.current_function = function_name
+
+ def Count(self):
+ """Count line in current function body."""
+ if self.in_a_function:
+ self.lines_in_function += 1
+
+ def Check(self, error, filename, linenum):
+ """Report if too many lines in function body.
+
+ Args:
+ error: The function to call with any errors found.
+ filename: The name of the current file.
+ linenum: The number of the line to check.
+ """
+ if Match(r'T(EST|est)', self.current_function):
+ base_trigger = self._TEST_TRIGGER
+ else:
+ base_trigger = self._NORMAL_TRIGGER
+ trigger = base_trigger * 2**_VerboseLevel()
+
+ if self.lines_in_function > trigger:
+ error_level = int(math.log(self.lines_in_function / base_trigger, 2))
+ # 50 => 0, 100 => 1, 200 => 2, 400 => 3, 800 => 4, 1600 => 5, ...
+ if error_level > 5:
+ error_level = 5
+ error(filename, linenum, 'readability/fn_size', error_level,
+ 'Small and focused functions are preferred:'
+ ' %s has %d non-comment lines'
+ ' (error triggered by exceeding %d lines).' % (
+ self.current_function, self.lines_in_function, trigger))
+
+ def End(self):
+ """Stop analyzing function body."""
+ self.in_a_function = False
+
+
+class _IncludeError(Exception):
+ """Indicates a problem with the include order in a file."""
+ pass
+
+
+class FileInfo:
+ """Provides utility functions for filenames.
+
+ FileInfo provides easy access to the components of a file's path
+ relative to the project root.
+ """
+
+ def __init__(self, filename):
+ self._filename = filename
+
+ def FullName(self):
+ """Make Windows paths like Unix."""
+ return os.path.abspath(self._filename).replace('\\', '/')
+
+ def RepositoryName(self):
+ """FullName after removing the local path to the repository.
+
+ If we have a real absolute path name here we can try to do something smart:
+ detecting the root of the checkout and truncating /path/to/checkout from
+ the name so that we get header guards that don't include things like
+ "C:\Documents and Settings\..." or "/home/username/..." in them and thus
+ people on different computers who have checked the source out to different
+ locations won't see bogus errors.
+ """
+ fullname = self.FullName()
+
+ if os.path.exists(fullname):
+ project_dir = os.path.dirname(fullname)
+
+ if os.path.exists(os.path.join(project_dir, ".svn")):
+ # If there's a .svn file in the current directory, we recursively look
+ # up the directory tree for the top of the SVN checkout
+ root_dir = project_dir
+ one_up_dir = os.path.dirname(root_dir)
+ while os.path.exists(os.path.join(one_up_dir, ".svn")):
+ root_dir = os.path.dirname(root_dir)
+ one_up_dir = os.path.dirname(one_up_dir)
+
+ prefix = os.path.commonprefix([root_dir, project_dir])
+ return fullname[len(prefix) + 1:]
+
+ # Not SVN <= 1.6? Try to find a git, hg, or svn top level directory by
+ # searching up from the current path.
+ root_dir = os.path.dirname(fullname)
+ while (root_dir != os.path.dirname(root_dir) and
+ not os.path.exists(os.path.join(root_dir, ".git")) and
+ not os.path.exists(os.path.join(root_dir, ".hg")) and
+ not os.path.exists(os.path.join(root_dir, ".svn"))):
+ root_dir = os.path.dirname(root_dir)
+
+ if (os.path.exists(os.path.join(root_dir, ".git")) or
+ os.path.exists(os.path.join(root_dir, ".hg")) or
+ os.path.exists(os.path.join(root_dir, ".svn"))):
+ prefix = os.path.commonprefix([root_dir, project_dir])
+ return fullname[len(prefix) + 1:]
+
+ # Don't know what to do; header guard warnings may be wrong...
+ return fullname
+
+ def Split(self):
+ """Splits the file into the directory, basename, and extension.
+
+ For 'chrome/browser/browser.cc', Split() would
+ return ('chrome/browser', 'browser', '.cc')
+
+ Returns:
+ A tuple of (directory, basename, extension).
+ """
+
+ googlename = self.RepositoryName()
+ project, rest = os.path.split(googlename)
+ return (project,) + os.path.splitext(rest)
+
+ def BaseName(self):
+ """File base name - text after the final slash, before the final period."""
+ return self.Split()[1]
+
+ def Extension(self):
+ """File extension - text following the final period."""
+ return self.Split()[2]
+
+ def NoExtension(self):
+ """File has no source file extension."""
+ return '/'.join(self.Split()[0:2])
+
+ def IsSource(self):
+ """File has a source file extension."""
+ return self.Extension()[1:] in ('c', 'cc', 'cpp', 'cxx')
+
+
+def _ShouldPrintError(category, confidence, linenum):
+ """If confidence >= verbose, category passes filter and is not suppressed."""
+
+ # There are three ways we might decide not to print an error message:
+ # a "NOLINT(category)" comment appears in the source,
+ # the verbosity level isn't high enough, or the filters filter it out.
+ if IsErrorSuppressedByNolint(category, linenum):
+ return False
+ if confidence < _cpplint_state.verbose_level:
+ return False
+
+ is_filtered = False
+ for one_filter in _Filters():
+ if one_filter.startswith('-'):
+ if category.startswith(one_filter[1:]):
+ is_filtered = True
+ elif one_filter.startswith('+'):
+ if category.startswith(one_filter[1:]):
+ is_filtered = False
+ else:
+ assert False # should have been checked for in SetFilter.
+ if is_filtered:
+ return False
+
+ return True
+
+
+def Error(filename, linenum, category, confidence, message):
+ """Logs the fact we've found a lint error.
+
+ We log where the error was found, and also our confidence in the error,
+ that is, how certain we are this is a legitimate style regression, and
+ not a misidentification or a use that's sometimes justified.
+
+ False positives can be suppressed by the use of
+ "cpplint(category)" comments on the offending line. These are
+ parsed into _error_suppressions.
+
+ Args:
+ filename: The name of the file containing the error.
+ linenum: The number of the line containing the error.
+ category: A string used to describe the "category" this bug
+ falls under: "whitespace", say, or "runtime". Categories
+ may have a hierarchy separated by slashes: "whitespace/indent".
+ confidence: A number from 1-5 representing a confidence score for
+ the error, with 5 meaning that we are certain of the problem,
+ and 1 meaning that it could be a legitimate construct.
+ message: The error message.
+ """
+ if _ShouldPrintError(category, confidence, linenum):
+ _cpplint_state.IncrementErrorCount(category)
+ if _cpplint_state.output_format == 'vs7':
+ sys.stderr.write('%s(%s): %s [%s] [%d]\n' % (
+ filename, linenum, message, category, confidence))
+ elif _cpplint_state.output_format == 'eclipse':
+ sys.stderr.write('%s:%s: warning: %s [%s] [%d]\n' % (
+ filename, linenum, message, category, confidence))
+ else:
+ sys.stderr.write('%s:%s: %s [%s] [%d]\n' % (
+ filename, linenum, message, category, confidence))
+
+
+# Matches standard C++ escape sequences per 2.13.2.3 of the C++ standard.
+_RE_PATTERN_CLEANSE_LINE_ESCAPES = re.compile(
+ r'\\([abfnrtv?"\\\']|\d+|x[0-9a-fA-F]+)')
+# Matches strings. Escape codes should already be removed by ESCAPES.
+_RE_PATTERN_CLEANSE_LINE_DOUBLE_QUOTES = re.compile(r'"[^"]*"')
+# Matches characters. Escape codes should already be removed by ESCAPES.
+_RE_PATTERN_CLEANSE_LINE_SINGLE_QUOTES = re.compile(r"'.'")
+# Matches multi-line C++ comments.
+# This RE is a little bit more complicated than one might expect, because we
+# have to take care of space removals tools so we can handle comments inside
+# statements better.
+# The current rule is: We only clear spaces from both sides when we're at the
+# end of the line. Otherwise, we try to remove spaces from the right side,
+# if this doesn't work we try on left side but only if there's a non-character
+# on the right.
+_RE_PATTERN_CLEANSE_LINE_C_COMMENTS = re.compile(
+ r"""(\s*/\*.*\*/\s*$|
+ /\*.*\*/\s+|
+ \s+/\*.*\*/(?=\W)|
+ /\*.*\*/)""", re.VERBOSE)
+
+
+def IsCppString(line):
+ """Does line terminate so, that the next symbol is in string constant.
+
+ This function does not consider single-line nor multi-line comments.
+
+ Args:
+ line: is a partial line of code starting from the 0..n.
+
+ Returns:
+ True, if next character appended to 'line' is inside a
+ string constant.
+ """
+
+ line = line.replace(r'\\', 'XX') # after this, \\" does not match to \"
+ return ((line.count('"') - line.count(r'\"') - line.count("'\"'")) & 1) == 1
+
+
+def CleanseRawStrings(raw_lines):
+ """Removes C++11 raw strings from lines.
+
+ Before:
+ static const char kData[] = R"(
+ multi-line string
+ )";
+
+ After:
+ static const char kData[] = ""
+ (replaced by blank line)
+ "";
+
+ Args:
+ raw_lines: list of raw lines.
+
+ Returns:
+ list of lines with C++11 raw strings replaced by empty strings.
+ """
+
+ delimiter = None
+ lines_without_raw_strings = []
+ for line in raw_lines:
+ if delimiter:
+ # Inside a raw string, look for the end
+ end = line.find(delimiter)
+ if end >= 0:
+ # Found the end of the string, match leading space for this
+ # line and resume copying the original lines, and also insert
+ # a "" on the last line.
+ leading_space = Match(r'^(\s*)\S', line)
+ line = leading_space.group(1) + '""' + line[end + len(delimiter):]
+ delimiter = None
+ else:
+ # Haven't found the end yet, append a blank line.
+ line = ''
+
+ else:
+ # Look for beginning of a raw string.
+ # See 2.14.15 [lex.string] for syntax.
+ matched = Match(r'^(.*)\b(?:R|u8R|uR|UR|LR)"([^\s\\()]*)\((.*)$', line)
+ if matched:
+ delimiter = ')' + matched.group(2) + '"'
+
+ end = matched.group(3).find(delimiter)
+ if end >= 0:
+ # Raw string ended on same line
+ line = (matched.group(1) + '""' +
+ matched.group(3)[end + len(delimiter):])
+ delimiter = None
+ else:
+ # Start of a multi-line raw string
+ line = matched.group(1) + '""'
+
+ lines_without_raw_strings.append(line)
+
+ # TODO(unknown): if delimiter is not None here, we might want to
+ # emit a warning for unterminated string.
+ return lines_without_raw_strings
+
+
+def FindNextMultiLineCommentStart(lines, lineix):
+ """Find the beginning marker for a multiline comment."""
+ while lineix < len(lines):
+ if lines[lineix].strip().startswith('/*'):
+ # Only return this marker if the comment goes beyond this line
+ if lines[lineix].strip().find('*/', 2) < 0:
+ return lineix
+ lineix += 1
+ return len(lines)
+
+
+def FindNextMultiLineCommentEnd(lines, lineix):
+ """We are inside a comment, find the end marker."""
+ while lineix < len(lines):
+ if lines[lineix].strip().endswith('*/'):
+ return lineix
+ lineix += 1
+ return len(lines)
+
+
+def RemoveMultiLineCommentsFromRange(lines, begin, end):
+ """Clears a range of lines for multi-line comments."""
+ # Having // dummy comments makes the lines non-empty, so we will not get
+ # unnecessary blank line warnings later in the code.
+ for i in range(begin, end):
+ lines[i] = '// dummy'
+
+
+def RemoveMultiLineComments(filename, lines, error):
+ """Removes multiline (c-style) comments from lines."""
+ lineix = 0
+ while lineix < len(lines):
+ lineix_begin = FindNextMultiLineCommentStart(lines, lineix)
+ if lineix_begin >= len(lines):
+ return
+ lineix_end = FindNextMultiLineCommentEnd(lines, lineix_begin)
+ if lineix_end >= len(lines):
+ error(filename, lineix_begin + 1, 'readability/multiline_comment', 5,
+ 'Could not find end of multi-line comment')
+ return
+ RemoveMultiLineCommentsFromRange(lines, lineix_begin, lineix_end + 1)
+ lineix = lineix_end + 1
+
+
+def CleanseComments(line):
+ """Removes //-comments and single-line C-style /* */ comments.
+
+ Args:
+ line: A line of C++ source.
+
+ Returns:
+ The line with single-line comments removed.
+ """
+ commentpos = line.find('//')
+ if commentpos != -1 and not IsCppString(line[:commentpos]):
+ line = line[:commentpos].rstrip()
+ # get rid of /* ... */
+ return _RE_PATTERN_CLEANSE_LINE_C_COMMENTS.sub('', line)
+
+
+class CleansedLines(object):
+ """Holds 3 copies of all lines with different preprocessing applied to them.
+
+ 1) elided member contains lines without strings and comments,
+ 2) lines member contains lines without comments, and
+ 3) raw_lines member contains all the lines without processing.
+ All these three members are of <type 'list'>, and of the same length.
+ """
+
+ def __init__(self, lines):
+ self.elided = []
+ self.lines = []
+ self.raw_lines = lines
+ self.num_lines = len(lines)
+ self.lines_without_raw_strings = CleanseRawStrings(lines)
+ for linenum in range(len(self.lines_without_raw_strings)):
+ self.lines.append(CleanseComments(
+ self.lines_without_raw_strings[linenum]))
+ elided = self._CollapseStrings(self.lines_without_raw_strings[linenum])
+ self.elided.append(CleanseComments(elided))
+
+ def NumLines(self):
+ """Returns the number of lines represented."""
+ return self.num_lines
+
+ @staticmethod
+ def _CollapseStrings(elided):
+ """Collapses strings and chars on a line to simple "" or '' blocks.
+
+ We nix strings first so we're not fooled by text like '"http://"'
+
+ Args:
+ elided: The line being processed.
+
+ Returns:
+ The line with collapsed strings.
+ """
+ if not _RE_PATTERN_INCLUDE.match(elided):
+ # Remove escaped characters first to make quote/single quote collapsing
+ # basic. Things that look like escaped characters shouldn't occur
+ # outside of strings and chars.
+ elided = _RE_PATTERN_CLEANSE_LINE_ESCAPES.sub('', elided)
+ elided = _RE_PATTERN_CLEANSE_LINE_SINGLE_QUOTES.sub("''", elided)
+ elided = _RE_PATTERN_CLEANSE_LINE_DOUBLE_QUOTES.sub('""', elided)
+ return elided
+
+
+def FindEndOfExpressionInLine(line, startpos, depth, startchar, endchar):
+ """Find the position just after the matching endchar.
+
+ Args:
+ line: a CleansedLines line.
+ startpos: start searching at this position.
+ depth: nesting level at startpos.
+ startchar: expression opening character.
+ endchar: expression closing character.
+
+ Returns:
+ On finding matching endchar: (index just after matching endchar, 0)
+ Otherwise: (-1, new depth at end of this line)
+ """
+ for i in xrange(startpos, len(line)):
+ if line[i] == startchar:
+ depth += 1
+ elif line[i] == endchar:
+ depth -= 1
+ if depth == 0:
+ return (i + 1, 0)
+ return (-1, depth)
+
+
+def CloseExpression(clean_lines, linenum, pos):
+ """If input points to ( or { or [ or <, finds the position that closes it.
+
+ If lines[linenum][pos] points to a '(' or '{' or '[' or '<', finds the
+ linenum/pos that correspond to the closing of the expression.
+
+ Args:
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ pos: A position on the line.
+
+ Returns:
+ A tuple (line, linenum, pos) pointer *past* the closing brace, or
+ (line, len(lines), -1) if we never find a close. Note we ignore
+ strings and comments when matching; and the line we return is the
+ 'cleansed' line at linenum.
+ """
+
+ line = clean_lines.elided[linenum]
+ startchar = line[pos]
+ if startchar not in '({[<':
+ return (line, clean_lines.NumLines(), -1)
+ if startchar == '(': endchar = ')'
+ if startchar == '[': endchar = ']'
+ if startchar == '{': endchar = '}'
+ if startchar == '<': endchar = '>'
+
+ # Check first line
+ (end_pos, num_open) = FindEndOfExpressionInLine(
+ line, pos, 0, startchar, endchar)
+ if end_pos > -1:
+ return (line, linenum, end_pos)
+
+ # Continue scanning forward
+ while linenum < clean_lines.NumLines() - 1:
+ linenum += 1
+ line = clean_lines.elided[linenum]
+ (end_pos, num_open) = FindEndOfExpressionInLine(
+ line, 0, num_open, startchar, endchar)
+ if end_pos > -1:
+ return (line, linenum, end_pos)
+
+ # Did not find endchar before end of file, give up
+ return (line, clean_lines.NumLines(), -1)
+
+
+def FindStartOfExpressionInLine(line, endpos, depth, startchar, endchar):
+ """Find position at the matching startchar.
+
+ This is almost the reverse of FindEndOfExpressionInLine, but note
+ that the input position and returned position differs by 1.
+
+ Args:
+ line: a CleansedLines line.
+ endpos: start searching at this position.
+ depth: nesting level at endpos.
+ startchar: expression opening character.
+ endchar: expression closing character.
+
+ Returns:
+ On finding matching startchar: (index at matching startchar, 0)
+ Otherwise: (-1, new depth at beginning of this line)
+ """
+ for i in xrange(endpos, -1, -1):
+ if line[i] == endchar:
+ depth += 1
+ elif line[i] == startchar:
+ depth -= 1
+ if depth == 0:
+ return (i, 0)
+ return (-1, depth)
+
+
+def ReverseCloseExpression(clean_lines, linenum, pos):
+ """If input points to ) or } or ] or >, finds the position that opens it.
+
+ If lines[linenum][pos] points to a ')' or '}' or ']' or '>', finds the
+ linenum/pos that correspond to the opening of the expression.
+
+ Args:
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ pos: A position on the line.
+
+ Returns:
+ A tuple (line, linenum, pos) pointer *at* the opening brace, or
+ (line, 0, -1) if we never find the matching opening brace. Note
+ we ignore strings and comments when matching; and the line we
+ return is the 'cleansed' line at linenum.
+ """
+ line = clean_lines.elided[linenum]
+ endchar = line[pos]
+ if endchar not in ')}]>':
+ return (line, 0, -1)
+ if endchar == ')': startchar = '('
+ if endchar == ']': startchar = '['
+ if endchar == '}': startchar = '{'
+ if endchar == '>': startchar = '<'
+
+ # Check last line
+ (start_pos, num_open) = FindStartOfExpressionInLine(
+ line, pos, 0, startchar, endchar)
+ if start_pos > -1:
+ return (line, linenum, start_pos)
+
+ # Continue scanning backward
+ while linenum > 0:
+ linenum -= 1
+ line = clean_lines.elided[linenum]
+ (start_pos, num_open) = FindStartOfExpressionInLine(
+ line, len(line) - 1, num_open, startchar, endchar)
+ if start_pos > -1:
+ return (line, linenum, start_pos)
+
+ # Did not find startchar before beginning of file, give up
+ return (line, 0, -1)
+
+
+def CheckForCopyright(filename, lines, error):
+ """Logs an error if no Copyright message appears at the top of the file."""
+
+ # We'll say it should occur by line 10. Don't forget there's a
+ # dummy line at the front.
+ for line in xrange(1, min(len(lines), 11)):
+ if re.search(r'Copyright', lines[line], re.I): break
+ else: # means no copyright line was found
+ error(filename, 0, 'legal/copyright', 5,
+ 'No copyright message found. '
+ 'You should have a line: "Copyright [year] <Copyright Owner>"')
+
+
+def GetHeaderGuardCPPVariable(filename):
+ """Returns the CPP variable that should be used as a header guard.
+
+ Args:
+ filename: The name of a C++ header file.
+
+ Returns:
+ The CPP variable that should be used as a header guard in the
+ named file.
+
+ """
+
+ # Restores original filename in case that cpplint is invoked from Emacs's
+ # flymake.
+ filename = re.sub(r'_flymake\.h$', '.h', filename)
+ filename = re.sub(r'/\.flymake/([^/]*)$', r'/\1', filename)
+
+ fileinfo = FileInfo(filename)
+ file_path_from_root = fileinfo.RepositoryName()
+ if _root:
+ file_path_from_root = re.sub('^' + _root + os.sep, '', file_path_from_root)
+ return re.sub(r'[-./\s]', '_', file_path_from_root).upper() + '_'
+
+
+def CheckForHeaderGuard(filename, lines, error):
+ """Checks that the file contains a header guard.
+
+ Logs an error if no #ifndef header guard is present. For other
+ headers, checks that the full pathname is used.
+
+ Args:
+ filename: The name of the C++ header file.
+ lines: An array of strings, each representing a line of the file.
+ error: The function to call with any errors found.
+ """
+
+ cppvar = GetHeaderGuardCPPVariable(filename)
+
+ ifndef = None
+ ifndef_linenum = 0
+ define = None
+ endif = None
+ endif_linenum = 0
+ for linenum, line in enumerate(lines):
+ linesplit = line.split()
+ if len(linesplit) >= 2:
+ # find the first occurrence of #ifndef and #define, save arg
+ if not ifndef and linesplit[0] == '#ifndef':
+ # set ifndef to the header guard presented on the #ifndef line.
+ ifndef = linesplit[1]
+ ifndef_linenum = linenum
+ if not define and linesplit[0] == '#define':
+ define = linesplit[1]
+ # find the last occurrence of #endif, save entire line
+ if line.startswith('#endif'):
+ endif = line
+ endif_linenum = linenum
+
+ if not ifndef:
+ error(filename, 0, 'build/header_guard', 5,
+ 'No #ifndef header guard found, suggested CPP variable is: %s' %
+ cppvar)
+ return
+
+ if not define:
+ error(filename, 0, 'build/header_guard', 5,
+ 'No #define header guard found, suggested CPP variable is: %s' %
+ cppvar)
+ return
+
+ # The guard should be PATH_FILE_H_, but we also allow PATH_FILE_H__
+ # for backward compatibility.
+ if ifndef != cppvar:
+ error_level = 0
+ if ifndef != cppvar + '_':
+ error_level = 5
+
+ ParseNolintSuppressions(filename, lines[ifndef_linenum], ifndef_linenum,
+ error)
+ error(filename, ifndef_linenum, 'build/header_guard', error_level,
+ '#ifndef header guard has wrong style, please use: %s' % cppvar)
+
+ if define != ifndef:
+ error(filename, 0, 'build/header_guard', 5,
+ '#ifndef and #define don\'t match, suggested CPP variable is: %s' %
+ cppvar)
+ return
+
+ if endif != ('#endif // %s' % cppvar):
+ error_level = 0
+ if endif != ('#endif // %s' % (cppvar + '_')):
+ error_level = 5
+
+ ParseNolintSuppressions(filename, lines[endif_linenum], endif_linenum,
+ error)
+ error(filename, endif_linenum, 'build/header_guard', error_level,
+ '#endif line should be "#endif // %s"' % cppvar)
+
+
+def CheckForBadCharacters(filename, lines, error):
+ """Logs an error for each line containing bad characters.
+
+ Two kinds of bad characters:
+
+ 1. Unicode replacement characters: These indicate that either the file
+ contained invalid UTF-8 (likely) or Unicode replacement characters (which
+ it shouldn't). Note that it's possible for this to throw off line
+ numbering if the invalid UTF-8 occurred adjacent to a newline.
+
+ 2. NUL bytes. These are problematic for some tools.
+
+ Args:
+ filename: The name of the current file.
+ lines: An array of strings, each representing a line of the file.
+ error: The function to call with any errors found.
+ """
+ for linenum, line in enumerate(lines):
+ if u'\ufffd' in line:
+ error(filename, linenum, 'readability/utf8', 5,
+ 'Line contains invalid UTF-8 (or Unicode replacement character).')
+ if '\0' in line:
+ error(filename, linenum, 'readability/nul', 5, 'Line contains NUL byte.')
+
+
+def CheckForNewlineAtEOF(filename, lines, error):
+ """Logs an error if there is no newline char at the end of the file.
+
+ Args:
+ filename: The name of the current file.
+ lines: An array of strings, each representing a line of the file.
+ error: The function to call with any errors found.
+ """
+
+ # The array lines() was created by adding two newlines to the
+ # original file (go figure), then splitting on \n.
+ # To verify that the file ends in \n, we just have to make sure the
+ # last-but-two element of lines() exists and is empty.
+ if len(lines) < 3 or lines[-2]:
+ error(filename, len(lines) - 2, 'whitespace/ending_newline', 5,
+ 'Could not find a newline character at the end of the file.')
+
+
+def CheckForMultilineCommentsAndStrings(filename, clean_lines, linenum, error):
+ """Logs an error if we see /* ... */ or "..." that extend past one line.
+
+ /* ... */ comments are legit inside macros, for one line.
+ Otherwise, we prefer // comments, so it's ok to warn about the
+ other. Likewise, it's ok for strings to extend across multiple
+ lines, as long as a line continuation character (backslash)
+ terminates each line. Although not currently prohibited by the C++
+ style guide, it's ugly and unnecessary. We don't do well with either
+ in this lint program, so we warn about both.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ error: The function to call with any errors found.
+ """
+ line = clean_lines.elided[linenum]
+
+ # Remove all \\ (escaped backslashes) from the line. They are OK, and the
+ # second (escaped) slash may trigger later \" detection erroneously.
+ line = line.replace('\\\\', '')
+
+ if line.count('/*') > line.count('*/'):
+ error(filename, linenum, 'readability/multiline_comment', 5,
+ 'Complex multi-line /*...*/-style comment found. '
+ 'Lint may give bogus warnings. '
+ 'Consider replacing these with //-style comments, '
+ 'with #if 0...#endif, '
+ 'or with more clearly structured multi-line comments.')
+
+ if (line.count('"') - line.count('\\"')) % 2:
+ error(filename, linenum, 'readability/multiline_string', 5,
+ 'Multi-line string ("...") found. This lint script doesn\'t '
+ 'do well with such strings, and may give bogus warnings. '
+ 'Use C++11 raw strings or concatenation instead.')
+
+
+threading_list = (
+ ('asctime(', 'asctime_r('),
+ ('ctime(', 'ctime_r('),
+ ('getgrgid(', 'getgrgid_r('),
+ ('getgrnam(', 'getgrnam_r('),
+ ('getlogin(', 'getlogin_r('),
+ ('getpwnam(', 'getpwnam_r('),
+ ('getpwuid(', 'getpwuid_r('),
+ ('gmtime(', 'gmtime_r('),
+ ('localtime(', 'localtime_r('),
+ ('rand(', 'rand_r('),
+ ('strtok(', 'strtok_r('),
+ ('ttyname(', 'ttyname_r('),
+ )
+
+
+def CheckPosixThreading(filename, clean_lines, linenum, error):
+ """Checks for calls to thread-unsafe functions.
+
+ Much code has been originally written without consideration of
+ multi-threading. Also, engineers are relying on their old experience;
+ they have learned posix before threading extensions were added. These
+ tests guide the engineers to use thread-safe functions (when using
+ posix directly).
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ error: The function to call with any errors found.
+ """
+ line = clean_lines.elided[linenum]
+ for single_thread_function, multithread_safe_function in threading_list:
+ ix = line.find(single_thread_function)
+ # Comparisons made explicit for clarity -- pylint: disable=g-explicit-bool-comparison
+ if ix >= 0 and (ix == 0 or (not line[ix - 1].isalnum() and
+ line[ix - 1] not in ('_', '.', '>'))):
+ error(filename, linenum, 'runtime/threadsafe_fn', 2,
+ 'Consider using ' + multithread_safe_function +
+ '...) instead of ' + single_thread_function +
+ '...) for improved thread safety.')
+
+
+def CheckVlogArguments(filename, clean_lines, linenum, error):
+ """Checks that VLOG() is only used for defining a logging level.
+
+ For example, VLOG(2) is correct. VLOG(INFO), VLOG(WARNING), VLOG(ERROR), and
+ VLOG(FATAL) are not.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ error: The function to call with any errors found.
+ """
+ line = clean_lines.elided[linenum]
+ if Search(r'\bVLOG\((INFO|ERROR|WARNING|DFATAL|FATAL)\)', line):
+ error(filename, linenum, 'runtime/vlog', 5,
+ 'VLOG() should be used with numeric verbosity level. '
+ 'Use LOG() if you want symbolic severity levels.')
+
+
+# Matches invalid increment: *count++, which moves pointer instead of
+# incrementing a value.
+_RE_PATTERN_INVALID_INCREMENT = re.compile(
+ r'^\s*\*\w+(\+\+|--);')
+
+
+def CheckInvalidIncrement(filename, clean_lines, linenum, error):
+ """Checks for invalid increment *count++.
+
+ For example following function:
+ void increment_counter(int* count) {
+ *count++;
+ }
+ is invalid, because it effectively does count++, moving pointer, and should
+ be replaced with ++*count, (*count)++ or *count += 1.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ error: The function to call with any errors found.
+ """
+ line = clean_lines.elided[linenum]
+ if _RE_PATTERN_INVALID_INCREMENT.match(line):
+ error(filename, linenum, 'runtime/invalid_increment', 5,
+ 'Changing pointer instead of value (or unused value of operator*).')
+
+
+class _BlockInfo(object):
+ """Stores information about a generic block of code."""
+
+ def __init__(self, seen_open_brace):
+ self.seen_open_brace = seen_open_brace
+ self.open_parentheses = 0
+ self.inline_asm = _NO_ASM
+
+ def CheckBegin(self, filename, clean_lines, linenum, error):
+ """Run checks that applies to text up to the opening brace.
+
+ This is mostly for checking the text after the class identifier
+ and the "{", usually where the base class is specified. For other
+ blocks, there isn't much to check, so we always pass.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ error: The function to call with any errors found.
+ """
+ pass
+
+ def CheckEnd(self, filename, clean_lines, linenum, error):
+ """Run checks that applies to text after the closing brace.
+
+ This is mostly used for checking end of namespace comments.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ error: The function to call with any errors found.
+ """
+ pass
+
+
+class _ClassInfo(_BlockInfo):
+ """Stores information about a class."""
+
+ def __init__(self, name, class_or_struct, clean_lines, linenum):
+ _BlockInfo.__init__(self, False)
+ self.name = name
+ self.starting_linenum = linenum
+ self.is_derived = False
+ if class_or_struct == 'struct':
+ self.access = 'public'
+ self.is_struct = True
+ else:
+ self.access = 'private'
+ self.is_struct = False
+
+ # Remember initial indentation level for this class. Using raw_lines here
+ # instead of elided to account for leading comments.
+ initial_indent = Match(r'^( *)\S', clean_lines.raw_lines[linenum])
+ if initial_indent:
+ self.class_indent = len(initial_indent.group(1))
+ else:
+ self.class_indent = 0
+
+ # Try to find the end of the class. This will be confused by things like:
+ # class A {
+ # } *x = { ...
+ #
+ # But it's still good enough for CheckSectionSpacing.
+ self.last_line = 0
+ depth = 0
+ for i in range(linenum, clean_lines.NumLines()):
+ line = clean_lines.elided[i]
+ depth += line.count('{') - line.count('}')
+ if not depth:
+ self.last_line = i
+ break
+
+ def CheckBegin(self, filename, clean_lines, linenum, error):
+ # Look for a bare ':'
+ if Search('(^|[^:]):($|[^:])', clean_lines.elided[linenum]):
+ self.is_derived = True
+
+ def CheckEnd(self, filename, clean_lines, linenum, error):
+ # Check that closing brace is aligned with beginning of the class.
+ # Only do this if the closing brace is indented by only whitespaces.
+ # This means we will not check single-line class definitions.
+ indent = Match(r'^( *)\}', clean_lines.elided[linenum])
+ if indent and len(indent.group(1)) != self.class_indent:
+ if self.is_struct:
+ parent = 'struct ' + self.name
+ else:
+ parent = 'class ' + self.name
+ error(filename, linenum, 'whitespace/indent', 3,
+ 'Closing brace should be aligned with beginning of %s' % parent)
+
+
+class _NamespaceInfo(_BlockInfo):
+ """Stores information about a namespace."""
+
+ def __init__(self, name, linenum):
+ _BlockInfo.__init__(self, False)
+ self.name = name or ''
+ self.starting_linenum = linenum
+
+ def CheckEnd(self, filename, clean_lines, linenum, error):
+ """Check end of namespace comments."""
+ line = clean_lines.raw_lines[linenum]
+
+ # Check how many lines is enclosed in this namespace. Don't issue
+ # warning for missing namespace comments if there aren't enough
+ # lines. However, do apply checks if there is already an end of
+ # namespace comment and it's incorrect.
+ #
+ # TODO(unknown): We always want to check end of namespace comments
+ # if a namespace is large, but sometimes we also want to apply the
+ # check if a short namespace contained nontrivial things (something
+ # other than forward declarations). There is currently no logic on
+ # deciding what these nontrivial things are, so this check is
+ # triggered by namespace size only, which works most of the time.
+ if (linenum - self.starting_linenum < 10
+ and not Match(r'};*\s*(//|/\*).*\bnamespace\b', line)):
+ return
+
+ # Look for matching comment at end of namespace.
+ #
+ # Note that we accept C style "/* */" comments for terminating
+ # namespaces, so that code that terminate namespaces inside
+ # preprocessor macros can be cpplint clean.
+ #
+ # We also accept stuff like "// end of namespace <name>." with the
+ # period at the end.
+ #
+ # Besides these, we don't accept anything else, otherwise we might
+ # get false negatives when existing comment is a substring of the
+ # expected namespace.
+ if self.name:
+ # Named namespace
+ if not Match((r'};*\s*(//|/\*).*\bnamespace\s+' + re.escape(self.name) +
+ r'[\*/\.\\\s]*$'),
+ line):
+ error(filename, linenum, 'readability/namespace', 5,
+ 'Namespace should be terminated with "// namespace %s"' %
+ self.name)
+ else:
+ # Anonymous namespace
+ if not Match(r'};*\s*(//|/\*).*\bnamespace[\*/\.\\\s]*$', line):
+ error(filename, linenum, 'readability/namespace', 5,
+ 'Namespace should be terminated with "// namespace"')
+
+
+class _PreprocessorInfo(object):
+ """Stores checkpoints of nesting stacks when #if/#else is seen."""
+
+ def __init__(self, stack_before_if):
+ # The entire nesting stack before #if
+ self.stack_before_if = stack_before_if
+
+ # The entire nesting stack up to #else
+ self.stack_before_else = []
+
+ # Whether we have already seen #else or #elif
+ self.seen_else = False
+
+
+class _NestingState(object):
+ """Holds states related to parsing braces."""
+
+ def __init__(self):
+ # Stack for tracking all braces. An object is pushed whenever we
+ # see a "{", and popped when we see a "}". Only 3 types of
+ # objects are possible:
+ # - _ClassInfo: a class or struct.
+ # - _NamespaceInfo: a namespace.
+ # - _BlockInfo: some other type of block.
+ self.stack = []
+
+ # Stack of _PreprocessorInfo objects.
+ self.pp_stack = []
+
+ def SeenOpenBrace(self):
+ """Check if we have seen the opening brace for the innermost block.
+
+ Returns:
+ True if we have seen the opening brace, False if the innermost
+ block is still expecting an opening brace.
+ """
+ return (not self.stack) or self.stack[-1].seen_open_brace
+
+ def InNamespaceBody(self):
+ """Check if we are currently one level inside a namespace body.
+
+ Returns:
+ True if top of the stack is a namespace block, False otherwise.
+ """
+ return self.stack and isinstance(self.stack[-1], _NamespaceInfo)
+
+ def UpdatePreprocessor(self, line):
+ """Update preprocessor stack.
+
+ We need to handle preprocessors due to classes like this:
+ #ifdef SWIG
+ struct ResultDetailsPageElementExtensionPoint {
+ #else
+ struct ResultDetailsPageElementExtensionPoint : public Extension {
+ #endif
+
+ We make the following assumptions (good enough for most files):
+ - Preprocessor condition evaluates to true from #if up to first
+ #else/#elif/#endif.
+
+ - Preprocessor condition evaluates to false from #else/#elif up
+ to #endif. We still perform lint checks on these lines, but
+ these do not affect nesting stack.
+
+ Args:
+ line: current line to check.
+ """
+ if Match(r'^\s*#\s*(if|ifdef|ifndef)\b', line):
+ # Beginning of #if block, save the nesting stack here. The saved
+ # stack will allow us to restore the parsing state in the #else case.
+ self.pp_stack.append(_PreprocessorInfo(copy.deepcopy(self.stack)))
+ elif Match(r'^\s*#\s*(else|elif)\b', line):
+ # Beginning of #else block
+ if self.pp_stack:
+ if not self.pp_stack[-1].seen_else:
+ # This is the first #else or #elif block. Remember the
+ # whole nesting stack up to this point. This is what we
+ # keep after the #endif.
+ self.pp_stack[-1].seen_else = True
+ self.pp_stack[-1].stack_before_else = copy.deepcopy(self.stack)
+
+ # Restore the stack to how it was before the #if
+ self.stack = copy.deepcopy(self.pp_stack[-1].stack_before_if)
+ else:
+ # TODO(unknown): unexpected #else, issue warning?
+ pass
+ elif Match(r'^\s*#\s*endif\b', line):
+ # End of #if or #else blocks.
+ if self.pp_stack:
+ # If we saw an #else, we will need to restore the nesting
+ # stack to its former state before the #else, otherwise we
+ # will just continue from where we left off.
+ if self.pp_stack[-1].seen_else:
+ # Here we can just use a shallow copy since we are the last
+ # reference to it.
+ self.stack = self.pp_stack[-1].stack_before_else
+ # Drop the corresponding #if
+ self.pp_stack.pop()
+ else:
+ # TODO(unknown): unexpected #endif, issue warning?
+ pass
+
+ def Update(self, filename, clean_lines, linenum, error):
+ """Update nesting state with current line.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ error: The function to call with any errors found.
+ """
+ line = clean_lines.elided[linenum]
+
+ # Update pp_stack first
+ self.UpdatePreprocessor(line)
+
+ # Count parentheses. This is to avoid adding struct arguments to
+ # the nesting stack.
+ if self.stack:
+ inner_block = self.stack[-1]
+ depth_change = line.count('(') - line.count(')')
+ inner_block.open_parentheses += depth_change
+
+ # Also check if we are starting or ending an inline assembly block.
+ if inner_block.inline_asm in (_NO_ASM, _END_ASM):
+ if (depth_change != 0 and
+ inner_block.open_parentheses == 1 and
+ _MATCH_ASM.match(line)):
+ # Enter assembly block
+ inner_block.inline_asm = _INSIDE_ASM
+ else:
+ # Not entering assembly block. If previous line was _END_ASM,
+ # we will now shift to _NO_ASM state.
+ inner_block.inline_asm = _NO_ASM
+ elif (inner_block.inline_asm == _INSIDE_ASM and
+ inner_block.open_parentheses == 0):
+ # Exit assembly block
+ inner_block.inline_asm = _END_ASM
+
+ # Consume namespace declaration at the beginning of the line. Do
+ # this in a loop so that we catch same line declarations like this:
+ # namespace proto2 { namespace bridge { class MessageSet; } }
+ while True:
+ # Match start of namespace. The "\b\s*" below catches namespace
+ # declarations even if it weren't followed by a whitespace, this
+ # is so that we don't confuse our namespace checker. The
+ # missing spaces will be flagged by CheckSpacing.
+ namespace_decl_match = Match(r'^\s*namespace\b\s*([:\w]+)?(.*)$', line)
+ if not namespace_decl_match:
+ break
+
+ new_namespace = _NamespaceInfo(namespace_decl_match.group(1), linenum)
+ self.stack.append(new_namespace)
+
+ line = namespace_decl_match.group(2)
+ if line.find('{') != -1:
+ new_namespace.seen_open_brace = True
+ line = line[line.find('{') + 1:]
+
+ # Look for a class declaration in whatever is left of the line
+ # after parsing namespaces. The regexp accounts for decorated classes
+ # such as in:
+ # class LOCKABLE API Object {
+ # };
+ #
+ # Templates with class arguments may confuse the parser, for example:
+ # template <class T
+ # class Comparator = less<T>,
+ # class Vector = vector<T> >
+ # class HeapQueue {
+ #
+ # Because this parser has no nesting state about templates, by the
+ # time it saw "class Comparator", it may think that it's a new class.
+ # Nested templates have a similar problem:
+ # template <
+ # typename ExportedType,
+ # typename TupleType,
+ # template <typename, typename> class ImplTemplate>
+ #
+ # To avoid these cases, we ignore classes that are followed by '=' or '>'
+ class_decl_match = Match(
+ r'\s*(template\s*<[\w\s<>,:]*>\s*)?'
+ r'(class|struct)\s+([A-Z_]+\s+)*(\w+(?:::\w+)*)'
+ r'(([^=>]|<[^<>]*>|<[^<>]*<[^<>]*>\s*>)*)$', line)
+ if (class_decl_match and
+ (not self.stack or self.stack[-1].open_parentheses == 0)):
+ self.stack.append(_ClassInfo(
+ class_decl_match.group(4), class_decl_match.group(2),
+ clean_lines, linenum))
+ line = class_decl_match.group(5)
+
+ # If we have not yet seen the opening brace for the innermost block,
+ # run checks here.
+ if not self.SeenOpenBrace():
+ self.stack[-1].CheckBegin(filename, clean_lines, linenum, error)
+
+ # Update access control if we are inside a class/struct
+ if self.stack and isinstance(self.stack[-1], _ClassInfo):
+ classinfo = self.stack[-1]
+ access_match = Match(
+ r'^(.*)\b(public|private|protected|signals)(\s+(?:slots\s*)?)?'
+ r':(?:[^:]|$)',
+ line)
+ if access_match:
+ classinfo.access = access_match.group(2)
+
+ # Check that access keywords are indented +1 space. Skip this
+ # check if the keywords are not preceded by whitespaces.
+ indent = access_match.group(1)
+ if (len(indent) != classinfo.class_indent + 1 and
+ Match(r'^\s*$', indent)):
+ if classinfo.is_struct:
+ parent = 'struct ' + classinfo.name
+ else:
+ parent = 'class ' + classinfo.name
+ slots = ''
+ if access_match.group(3):
+ slots = access_match.group(3)
+ error(filename, linenum, 'whitespace/indent', 3,
+ '%s%s: should be indented +1 space inside %s' % (
+ access_match.group(2), slots, parent))
+
+ # Consume braces or semicolons from what's left of the line
+ while True:
+ # Match first brace, semicolon, or closed parenthesis.
+ matched = Match(r'^[^{;)}]*([{;)}])(.*)$', line)
+ if not matched:
+ break
+
+ token = matched.group(1)
+ if token == '{':
+ # If namespace or class hasn't seen a opening brace yet, mark
+ # namespace/class head as complete. Push a new block onto the
+ # stack otherwise.
+ if not self.SeenOpenBrace():
+ self.stack[-1].seen_open_brace = True
+ else:
+ self.stack.append(_BlockInfo(True))
+ if _MATCH_ASM.match(line):
+ self.stack[-1].inline_asm = _BLOCK_ASM
+ elif token == ';' or token == ')':
+ # If we haven't seen an opening brace yet, but we already saw
+ # a semicolon, this is probably a forward declaration. Pop
+ # the stack for these.
+ #
+ # Similarly, if we haven't seen an opening brace yet, but we
+ # already saw a closing parenthesis, then these are probably
+ # function arguments with extra "class" or "struct" keywords.
+ # Also pop these stack for these.
+ if not self.SeenOpenBrace():
+ self.stack.pop()
+ else: # token == '}'
+ # Perform end of block checks and pop the stack.
+ if self.stack:
+ self.stack[-1].CheckEnd(filename, clean_lines, linenum, error)
+ self.stack.pop()
+ line = matched.group(2)
+
+ def InnermostClass(self):
+ """Get class info on the top of the stack.
+
+ Returns:
+ A _ClassInfo object if we are inside a class, or None otherwise.
+ """
+ for i in range(len(self.stack), 0, -1):
+ classinfo = self.stack[i - 1]
+ if isinstance(classinfo, _ClassInfo):
+ return classinfo
+ return None
+
+ def CheckCompletedBlocks(self, filename, error):
+ """Checks that all classes and namespaces have been completely parsed.
+
+ Call this when all lines in a file have been processed.
+ Args:
+ filename: The name of the current file.
+ error: The function to call with any errors found.
+ """
+ # Note: This test can result in false positives if #ifdef constructs
+ # get in the way of brace matching. See the testBuildClass test in
+ # cpplint_unittest.py for an example of this.
+ for obj in self.stack:
+ if isinstance(obj, _ClassInfo):
+ error(filename, obj.starting_linenum, 'build/class', 5,
+ 'Failed to find complete declaration of class %s' %
+ obj.name)
+ elif isinstance(obj, _NamespaceInfo):
+ error(filename, obj.starting_linenum, 'build/namespaces', 5,
+ 'Failed to find complete declaration of namespace %s' %
+ obj.name)
+
+
+def CheckForNonStandardConstructs(filename, clean_lines, linenum,
+ nesting_state, error):
+ r"""Logs an error if we see certain non-ANSI constructs ignored by gcc-2.
+
+ Complain about several constructs which gcc-2 accepts, but which are
+ not standard C++. Warning about these in lint is one way to ease the
+ transition to new compilers.
+ - put storage class first (e.g. "static const" instead of "const static").
+ - "%lld" instead of %qd" in printf-type functions.
+ - "%1$d" is non-standard in printf-type functions.
+ - "\%" is an undefined character escape sequence.
+ - text after #endif is not allowed.
+ - invalid inner-style forward declaration.
+ - >? and <? operators, and their >?= and <?= cousins.
+
+ Additionally, check for constructor/destructor style violations and reference
+ members, as it is very convenient to do so while checking for
+ gcc-2 compliance.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ nesting_state: A _NestingState instance which maintains information about
+ the current stack of nested blocks being parsed.
+ error: A callable to which errors are reported, which takes 4 arguments:
+ filename, line number, error level, and message
+ """
+
+ # Remove comments from the line, but leave in strings for now.
+ line = clean_lines.lines[linenum]
+
+ if Search(r'printf\s*\(.*".*%[-+ ]?\d*q', line):
+ error(filename, linenum, 'runtime/printf_format', 3,
+ '%q in format strings is deprecated. Use %ll instead.')
+
+ if Search(r'printf\s*\(.*".*%\d+\$', line):
+ error(filename, linenum, 'runtime/printf_format', 2,
+ '%N$ formats are unconventional. Try rewriting to avoid them.')
+
+ # Remove escaped backslashes before looking for undefined escapes.
+ line = line.replace('\\\\', '')
+
+ if Search(r'("|\').*\\(%|\[|\(|{)', line):
+ error(filename, linenum, 'build/printf_format', 3,
+ '%, [, (, and { are undefined character escapes. Unescape them.')
+
+ # For the rest, work with both comments and strings removed.
+ line = clean_lines.elided[linenum]
+
+ if Search(r'\b(const|volatile|void|char|short|int|long'
+ r'|float|double|signed|unsigned'
+ r'|schar|u?int8|u?int16|u?int32|u?int64)'
+ r'\s+(register|static|extern|typedef)\b',
+ line):
+ error(filename, linenum, 'build/storage_class', 5,
+ 'Storage class (static, extern, typedef, etc) should be first.')
+
+ if Match(r'\s*#\s*endif\s*[^/\s]+', line):
+ error(filename, linenum, 'build/endif_comment', 5,
+ 'Uncommented text after #endif is non-standard. Use a comment.')
+
+ if Match(r'\s*class\s+(\w+\s*::\s*)+\w+\s*;', line):
+ error(filename, linenum, 'build/forward_decl', 5,
+ 'Inner-style forward declarations are invalid. Remove this line.')
+
+ if Search(r'(\w+|[+-]?\d+(\.\d*)?)\s*(<|>)\?=?\s*(\w+|[+-]?\d+)(\.\d*)?',
+ line):
+ error(filename, linenum, 'build/deprecated', 3,
+ '>? and <? (max and min) operators are non-standard and deprecated.')
+
+ if Search(r'^\s*const\s*string\s*&\s*\w+\s*;', line):
+ # TODO(unknown): Could it be expanded safely to arbitrary references,
+ # without triggering too many false positives? The first
+ # attempt triggered 5 warnings for mostly benign code in the regtest, hence
+ # the restriction.
+ # Here's the original regexp, for the reference:
+ # type_name = r'\w+((\s*::\s*\w+)|(\s*<\s*\w+?\s*>))?'
+ # r'\s*const\s*' + type_name + '\s*&\s*\w+\s*;'
+ error(filename, linenum, 'runtime/member_string_references', 2,
+ 'const string& members are dangerous. It is much better to use '
+ 'alternatives, such as pointers or simple constants.')
+
+ # Everything else in this function operates on class declarations.
+ # Return early if the top of the nesting stack is not a class, or if
+ # the class head is not completed yet.
+ classinfo = nesting_state.InnermostClass()
+ if not classinfo or not classinfo.seen_open_brace:
+ return
+
+ # The class may have been declared with namespace or classname qualifiers.
+ # The constructor and destructor will not have those qualifiers.
+ base_classname = classinfo.name.split('::')[-1]
+
+ # Look for single-argument constructors that aren't marked explicit.
+ # Technically a valid construct, but against style.
+ args = Match(r'\s+(?:inline\s+)?%s\s*\(([^,()]+)\)'
+ % re.escape(base_classname),
+ line)
+ if (args and
+ args.group(1) != 'void' and
+ not Match(r'(const\s+)?%s(\s+const)?\s*(?:<\w+>\s*)?&'
+ % re.escape(base_classname), args.group(1).strip())):
+ error(filename, linenum, 'runtime/explicit', 5,
+ 'Single-argument constructors should be marked explicit.')
+
+
+def CheckSpacingForFunctionCall(filename, line, linenum, error):
+ """Checks for the correctness of various spacing around function calls.
+
+ Args:
+ filename: The name of the current file.
+ line: The text of the line to check.
+ linenum: The number of the line to check.
+ error: The function to call with any errors found.
+ """
+
+ # Since function calls often occur inside if/for/while/switch
+ # expressions - which have their own, more liberal conventions - we
+ # first see if we should be looking inside such an expression for a
+ # function call, to which we can apply more strict standards.
+ fncall = line # if there's no control flow construct, look at whole line
+ for pattern in (r'\bif\s*\((.*)\)\s*{',
+ r'\bfor\s*\((.*)\)\s*{',
+ r'\bwhile\s*\((.*)\)\s*[{;]',
+ r'\bswitch\s*\((.*)\)\s*{'):
+ match = Search(pattern, line)
+ if match:
+ fncall = match.group(1) # look inside the parens for function calls
+ break
+
+ # Except in if/for/while/switch, there should never be space
+ # immediately inside parens (eg "f( 3, 4 )"). We make an exception
+ # for nested parens ( (a+b) + c ). Likewise, there should never be
+ # a space before a ( when it's a function argument. I assume it's a
+ # function argument when the char before the whitespace is legal in
+ # a function name (alnum + _) and we're not starting a macro. Also ignore
+ # pointers and references to arrays and functions coz they're too tricky:
+ # we use a very simple way to recognize these:
+ # " (something)(maybe-something)" or
+ # " (something)(maybe-something," or
+ # " (something)[something]"
+ # Note that we assume the contents of [] to be short enough that
+ # they'll never need to wrap.
+ if ( # Ignore control structures.
+ not Search(r'\b(if|for|while|switch|return|new|delete|catch|sizeof)\b',
+ fncall) and
+ # Ignore pointers/references to functions.
+ not Search(r' \([^)]+\)\([^)]*(\)|,$)', fncall) and
+ # Ignore pointers/references to arrays.
+ not Search(r' \([^)]+\)\[[^\]]+\]', fncall)):
+ if Search(r'\w\s*\(\s(?!\s*\\$)', fncall): # a ( used for a fn call
+ error(filename, linenum, 'whitespace/parens', 4,
+ 'Extra space after ( in function call')
+ elif Search(r'\(\s+(?!(\s*\\)|\()', fncall):
+ error(filename, linenum, 'whitespace/parens', 2,
+ 'Extra space after (')
+ if (Search(r'\w\s+\(', fncall) and
+ not Search(r'#\s*define|typedef', fncall) and
+ not Search(r'\w\s+\((\w+::)*\*\w+\)\(', fncall)):
+ error(filename, linenum, 'whitespace/parens', 4,
+ 'Extra space before ( in function call')
+ # If the ) is followed only by a newline or a { + newline, assume it's
+ # part of a control statement (if/while/etc), and don't complain
+ if Search(r'[^)]\s+\)\s*[^{\s]', fncall):
+ # If the closing parenthesis is preceded by only whitespaces,
+ # try to give a more descriptive error message.
+ if Search(r'^\s+\)', fncall):
+ error(filename, linenum, 'whitespace/parens', 2,
+ 'Closing ) should be moved to the previous line')
+ else:
+ error(filename, linenum, 'whitespace/parens', 2,
+ 'Extra space before )')
+
+
+def IsBlankLine(line):
+ """Returns true if the given line is blank.
+
+ We consider a line to be blank if the line is empty or consists of
+ only white spaces.
+
+ Args:
+ line: A line of a string.
+
+ Returns:
+ True, if the given line is blank.
+ """
+ return not line or line.isspace()
+
+
+def CheckForFunctionLengths(filename, clean_lines, linenum,
+ function_state, error):
+ """Reports for long function bodies.
+
+ For an overview why this is done, see:
+ http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml#Write_Short_Functions
+
+ Uses a simplistic algorithm assuming other style guidelines
+ (especially spacing) are followed.
+ Only checks unindented functions, so class members are unchecked.
+ Trivial bodies are unchecked, so constructors with huge initializer lists
+ may be missed.
+ Blank/comment lines are not counted so as to avoid encouraging the removal
+ of vertical space and comments just to get through a lint check.
+ NOLINT *on the last line of a function* disables this check.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ function_state: Current function name and lines in body so far.
+ error: The function to call with any errors found.
+ """
+ lines = clean_lines.lines
+ line = lines[linenum]
+ raw = clean_lines.raw_lines
+ raw_line = raw[linenum]
+ joined_line = ''
+
+ starting_func = False
+ regexp = r'(\w(\w|::|\*|\&|\s)*)\(' # decls * & space::name( ...
+ match_result = Match(regexp, line)
+ if match_result:
+ # If the name is all caps and underscores, figure it's a macro and
+ # ignore it, unless it's TEST or TEST_F.
+ function_name = match_result.group(1).split()[-1]
+ if function_name == 'TEST' or function_name == 'TEST_F' or (
+ not Match(r'[A-Z_]+$', function_name)):
+ starting_func = True
+
+ if starting_func:
+ body_found = False
+ for start_linenum in xrange(linenum, clean_lines.NumLines()):
+ start_line = lines[start_linenum]
+ joined_line += ' ' + start_line.lstrip()
+ if Search(r'(;|})', start_line): # Declarations and trivial functions
+ body_found = True
+ break # ... ignore
+ elif Search(r'{', start_line):
+ body_found = True
+ function = Search(r'((\w|:)*)\(', line).group(1)
+ if Match(r'TEST', function): # Handle TEST... macros
+ parameter_regexp = Search(r'(\(.*\))', joined_line)
+ if parameter_regexp: # Ignore bad syntax
+ function += parameter_regexp.group(1)
+ else:
+ function += '()'
+ function_state.Begin(function)
+ break
+ if not body_found:
+ # No body for the function (or evidence of a non-function) was found.
+ error(filename, linenum, 'readability/fn_size', 5,
+ 'Lint failed to find start of function body.')
+ elif Match(r'^\}\s*$', line): # function end
+ function_state.Check(error, filename, linenum)
+ function_state.End()
+ elif not Match(r'^\s*$', line):
+ function_state.Count() # Count non-blank/non-comment lines.
+
+
+_RE_PATTERN_TODO = re.compile(r'^//(\s*)TODO(\(.+?\))?:?(\s|$)?')
+
+
+def CheckComment(comment, filename, linenum, error):
+ """Checks for common mistakes in TODO comments.
+
+ Args:
+ comment: The text of the comment from the line in question.
+ filename: The name of the current file.
+ linenum: The number of the line to check.
+ error: The function to call with any errors found.
+ """
+ match = _RE_PATTERN_TODO.match(comment)
+ if match:
+ # One whitespace is correct; zero whitespace is handled elsewhere.
+ leading_whitespace = match.group(1)
+ if len(leading_whitespace) > 1:
+ error(filename, linenum, 'whitespace/todo', 2,
+ 'Too many spaces before TODO')
+
+ username = match.group(2)
+ if not username:
+ error(filename, linenum, 'readability/todo', 2,
+ 'Missing username in TODO; it should look like '
+ '"// TODO(my_username): Stuff."')
+
+ middle_whitespace = match.group(3)
+ # Comparisons made explicit for correctness -- pylint: disable=g-explicit-bool-comparison
+ if middle_whitespace != ' ' and middle_whitespace != '':
+ error(filename, linenum, 'whitespace/todo', 2,
+ 'TODO(my_username) should be followed by a space')
+
+def CheckAccess(filename, clean_lines, linenum, nesting_state, error):
+ """Checks for improper use of DISALLOW* macros.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ nesting_state: A _NestingState instance which maintains information about
+ the current stack of nested blocks being parsed.
+ error: The function to call with any errors found.
+ """
+ line = clean_lines.elided[linenum] # get rid of comments and strings
+
+ matched = Match((r'\s*(DISALLOW_COPY_AND_ASSIGN|'
+ r'DISALLOW_EVIL_CONSTRUCTORS|'
+ r'DISALLOW_IMPLICIT_CONSTRUCTORS)'), line)
+ if not matched:
+ return
+ if nesting_state.stack and isinstance(nesting_state.stack[-1], _ClassInfo):
+ if nesting_state.stack[-1].access != 'private':
+ error(filename, linenum, 'readability/constructors', 3,
+ '%s must be in the private: section' % matched.group(1))
+
+ else:
+ # Found DISALLOW* macro outside a class declaration, or perhaps it
+ # was used inside a function when it should have been part of the
+ # class declaration. We could issue a warning here, but it
+ # probably resulted in a compiler error already.
+ pass
+
+
+def FindNextMatchingAngleBracket(clean_lines, linenum, init_suffix):
+ """Find the corresponding > to close a template.
+
+ Args:
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: Current line number.
+ init_suffix: Remainder of the current line after the initial <.
+
+ Returns:
+ True if a matching bracket exists.
+ """
+ line = init_suffix
+ nesting_stack = ['<']
+ while True:
+ # Find the next operator that can tell us whether < is used as an
+ # opening bracket or as a less-than operator. We only want to
+ # warn on the latter case.
+ #
+ # We could also check all other operators and terminate the search
+ # early, e.g. if we got something like this "a<b+c", the "<" is
+ # most likely a less-than operator, but then we will get false
+ # positives for default arguments and other template expressions.
+ match = Search(r'^[^<>(),;\[\]]*([<>(),;\[\]])(.*)$', line)
+ if match:
+ # Found an operator, update nesting stack
+ operator = match.group(1)
+ line = match.group(2)
+
+ if nesting_stack[-1] == '<':
+ # Expecting closing angle bracket
+ if operator in ('<', '(', '['):
+ nesting_stack.append(operator)
+ elif operator == '>':
+ nesting_stack.pop()
+ if not nesting_stack:
+ # Found matching angle bracket
+ return True
+ elif operator == ',':
+ # Got a comma after a bracket, this is most likely a template
+ # argument. We have not seen a closing angle bracket yet, but
+ # it's probably a few lines later if we look for it, so just
+ # return early here.
+ return True
+ else:
+ # Got some other operator.
+ return False
+
+ else:
+ # Expecting closing parenthesis or closing bracket
+ if operator in ('<', '(', '['):
+ nesting_stack.append(operator)
+ elif operator in (')', ']'):
+ # We don't bother checking for matching () or []. If we got
+ # something like (] or [), it would have been a syntax error.
+ nesting_stack.pop()
+
+ else:
+ # Scan the next line
+ linenum += 1
+ if linenum >= len(clean_lines.elided):
+ break
+ line = clean_lines.elided[linenum]
+
+ # Exhausted all remaining lines and still no matching angle bracket.
+ # Most likely the input was incomplete, otherwise we should have
+ # seen a semicolon and returned early.
+ return True
+
+
+def FindPreviousMatchingAngleBracket(clean_lines, linenum, init_prefix):
+ """Find the corresponding < that started a template.
+
+ Args:
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: Current line number.
+ init_prefix: Part of the current line before the initial >.
+
+ Returns:
+ True if a matching bracket exists.
+ """
+ line = init_prefix
+ nesting_stack = ['>']
+ while True:
+ # Find the previous operator
+ match = Search(r'^(.*)([<>(),;\[\]])[^<>(),;\[\]]*$', line)
+ if match:
+ # Found an operator, update nesting stack
+ operator = match.group(2)
+ line = match.group(1)
+
+ if nesting_stack[-1] == '>':
+ # Expecting opening angle bracket
+ if operator in ('>', ')', ']'):
+ nesting_stack.append(operator)
+ elif operator == '<':
+ nesting_stack.pop()
+ if not nesting_stack:
+ # Found matching angle bracket
+ return True
+ elif operator == ',':
+ # Got a comma before a bracket, this is most likely a
+ # template argument. The opening angle bracket is probably
+ # there if we look for it, so just return early here.
+ return True
+ else:
+ # Got some other operator.
+ return False
+
+ else:
+ # Expecting opening parenthesis or opening bracket
+ if operator in ('>', ')', ']'):
+ nesting_stack.append(operator)
+ elif operator in ('(', '['):
+ nesting_stack.pop()
+
+ else:
+ # Scan the previous line
+ linenum -= 1
+ if linenum < 0:
+ break
+ line = clean_lines.elided[linenum]
+
+ # Exhausted all earlier lines and still no matching angle bracket.
+ return False
+
+
+def CheckSpacing(filename, clean_lines, linenum, nesting_state, error):
+ """Checks for the correctness of various spacing issues in the code.
+
+ Things we check for: spaces around operators, spaces after
+ if/for/while/switch, no spaces around parens in function calls, two
+ spaces between code and comment, don't start a block with a blank
+ line, don't end a function with a blank line, don't add a blank line
+ after public/protected/private, don't have too many blank lines in a row.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ nesting_state: A _NestingState instance which maintains information about
+ the current stack of nested blocks being parsed.
+ error: The function to call with any errors found.
+ """
+
+ # Don't use "elided" lines here, otherwise we can't check commented lines.
+ # Don't want to use "raw" either, because we don't want to check inside C++11
+ # raw strings,
+ raw = clean_lines.lines_without_raw_strings
+ line = raw[linenum]
+
+ # Before nixing comments, check if the line is blank for no good
+ # reason. This includes the first line after a block is opened, and
+ # blank lines at the end of a function (ie, right before a line like '}'
+ #
+ # Skip all the blank line checks if we are immediately inside a
+ # namespace body. In other words, don't issue blank line warnings
+ # for this block:
+ # namespace {
+ #
+ # }
+ #
+ # A warning about missing end of namespace comments will be issued instead.
+ if IsBlankLine(line) and not nesting_state.InNamespaceBody():
+ elided = clean_lines.elided
+ prev_line = elided[linenum - 1]
+ prevbrace = prev_line.rfind('{')
+ # TODO(unknown): Don't complain if line before blank line, and line after,
+ # both start with alnums and are indented the same amount.
+ # This ignores whitespace at the start of a namespace block
+ # because those are not usually indented.
+ if prevbrace != -1 and prev_line[prevbrace:].find('}') == -1:
+ # OK, we have a blank line at the start of a code block. Before we
+ # complain, we check if it is an exception to the rule: The previous
+ # non-empty line has the parameters of a function header that are indented
+ # 4 spaces (because they did not fit in a 80 column line when placed on
+ # the same line as the function name). We also check for the case where
+ # the previous line is indented 6 spaces, which may happen when the
+ # initializers of a constructor do not fit into a 80 column line.
+ exception = False
+ if Match(r' {6}\w', prev_line): # Initializer list?
+ # We are looking for the opening column of initializer list, which
+ # should be indented 4 spaces to cause 6 space indentation afterwards.
+ search_position = linenum-2
+ while (search_position >= 0
+ and Match(r' {6}\w', elided[search_position])):
+ search_position -= 1
+ exception = (search_position >= 0
+ and elided[search_position][:5] == ' :')
+ else:
+ # Search for the function arguments or an initializer list. We use a
+ # simple heuristic here: If the line is indented 4 spaces; and we have a
+ # closing paren, without the opening paren, followed by an opening brace
+ # or colon (for initializer lists) we assume that it is the last line of
+ # a function header. If we have a colon indented 4 spaces, it is an
+ # initializer list.
+ exception = (Match(r' {4}\w[^\(]*\)\s*(const\s*)?(\{\s*$|:)',
+ prev_line)
+ or Match(r' {4}:', prev_line))
+
+ if not exception:
+ error(filename, linenum, 'whitespace/blank_line', 2,
+ 'Redundant blank line at the start of a code block '
+ 'should be deleted.')
+ # Ignore blank lines at the end of a block in a long if-else
+ # chain, like this:
+ # if (condition1) {
+ # // Something followed by a blank line
+ #
+ # } else if (condition2) {
+ # // Something else
+ # }
+ if linenum + 1 < clean_lines.NumLines():
+ next_line = raw[linenum + 1]
+ if (next_line
+ and Match(r'\s*}', next_line)
+ and next_line.find('} else ') == -1):
+ error(filename, linenum, 'whitespace/blank_line', 3,
+ 'Redundant blank line at the end of a code block '
+ 'should be deleted.')
+
+ matched = Match(r'\s*(public|protected|private):', prev_line)
+ if matched:
+ error(filename, linenum, 'whitespace/blank_line', 3,
+ 'Do not leave a blank line after "%s:"' % matched.group(1))
+
+ # Next, we complain if there's a comment too near the text
+ commentpos = line.find('//')
+ if commentpos != -1:
+ # Check if the // may be in quotes. If so, ignore it
+ # Comparisons made explicit for clarity -- pylint: disable=g-explicit-bool-comparison
+ if (line.count('"', 0, commentpos) -
+ line.count('\\"', 0, commentpos)) % 2 == 0: # not in quotes
+ # Allow one space for new scopes, two spaces otherwise:
+ if (not Match(r'^\s*{ //', line) and
+ ((commentpos >= 1 and
+ line[commentpos-1] not in string.whitespace) or
+ (commentpos >= 2 and
+ line[commentpos-2] not in string.whitespace))):
+ error(filename, linenum, 'whitespace/comments', 2,
+ 'At least two spaces is best between code and comments')
+ # There should always be a space between the // and the comment
+ commentend = commentpos + 2
+ if commentend < len(line) and not line[commentend] == ' ':
+ # but some lines are exceptions -- e.g. if they're big
+ # comment delimiters like:
+ # //----------------------------------------------------------
+ # or are an empty C++ style Doxygen comment, like:
+ # ///
+ # or C++ style Doxygen comments placed after the variable:
+ # ///< Header comment
+ # //!< Header comment
+ # or they begin with multiple slashes followed by a space:
+ # //////// Header comment
+ match = (Search(r'[=/-]{4,}\s*$', line[commentend:]) or
+ Search(r'^/$', line[commentend:]) or
+ Search(r'^!< ', line[commentend:]) or
+ Search(r'^/< ', line[commentend:]) or
+ Search(r'^/+ ', line[commentend:]))
+ if not match:
+ error(filename, linenum, 'whitespace/comments', 4,
+ 'Should have a space between // and comment')
+ CheckComment(line[commentpos:], filename, linenum, error)
+
+ line = clean_lines.elided[linenum] # get rid of comments and strings
+
+ # Don't try to do spacing checks for operator methods
+ line = re.sub(r'operator(==|!=|<|<<|<=|>=|>>|>)\(', 'operator\(', line)
+
+ # We allow no-spaces around = within an if: "if ( (a=Foo()) == 0 )".
+ # Otherwise not. Note we only check for non-spaces on *both* sides;
+ # sometimes people put non-spaces on one side when aligning ='s among
+ # many lines (not that this is behavior that I approve of...)
+ if Search(r'[\w.]=[\w.]', line) and not Search(r'\b(if|while) ', line):
+ error(filename, linenum, 'whitespace/operators', 4,
+ 'Missing spaces around =')
+
+ # It's ok not to have spaces around binary operators like + - * /, but if
+ # there's too little whitespace, we get concerned. It's hard to tell,
+ # though, so we punt on this one for now. TODO.
+
+ # You should always have whitespace around binary operators.
+ #
+ # Check <= and >= first to avoid false positives with < and >, then
+ # check non-include lines for spacing around < and >.
+ match = Search(r'[^<>=!\s](==|!=|<=|>=)[^<>=!\s]', line)
+ if match:
+ error(filename, linenum, 'whitespace/operators', 3,
+ 'Missing spaces around %s' % match.group(1))
+ # We allow no-spaces around << when used like this: 10<<20, but
+ # not otherwise (particularly, not when used as streams)
+ # Also ignore using ns::operator<<;
+ match = Search(r'(operator|\S)(?:L|UL|ULL|l|ul|ull)?<<(\S)', line)
+ if (match and
+ not (match.group(1).isdigit() and match.group(2).isdigit()) and
+ not (match.group(1) == 'operator' and match.group(2) == ';')):
+ error(filename, linenum, 'whitespace/operators', 3,
+ 'Missing spaces around <<')
+ elif not Match(r'#.*include', line):
+ # Avoid false positives on ->
+ reduced_line = line.replace('->', '')
+
+ # Look for < that is not surrounded by spaces. This is only
+ # triggered if both sides are missing spaces, even though
+ # technically should should flag if at least one side is missing a
+ # space. This is done to avoid some false positives with shifts.
+ match = Search(r'[^\s<]<([^\s=<].*)', reduced_line)
+ if (match and
+ not FindNextMatchingAngleBracket(clean_lines, linenum, match.group(1))):
+ error(filename, linenum, 'whitespace/operators', 3,
+ 'Missing spaces around <')
+
+ # Look for > that is not surrounded by spaces. Similar to the
+ # above, we only trigger if both sides are missing spaces to avoid
+ # false positives with shifts.
+ match = Search(r'^(.*[^\s>])>[^\s=>]', reduced_line)
+ if (match and
+ not FindPreviousMatchingAngleBracket(clean_lines, linenum,
+ match.group(1))):
+ error(filename, linenum, 'whitespace/operators', 3,
+ 'Missing spaces around >')
+
+ # We allow no-spaces around >> for almost anything. This is because
+ # C++11 allows ">>" to close nested templates, which accounts for
+ # most cases when ">>" is not followed by a space.
+ #
+ # We still warn on ">>" followed by alpha character, because that is
+ # likely due to ">>" being used for right shifts, e.g.:
+ # value >> alpha
+ #
+ # When ">>" is used to close templates, the alphanumeric letter that
+ # follows would be part of an identifier, and there should still be
+ # a space separating the template type and the identifier.
+ # type<type<type>> alpha
+ match = Search(r'>>[a-zA-Z_]', line)
+ if match:
+ error(filename, linenum, 'whitespace/operators', 3,
+ 'Missing spaces around >>')
+
+ # There shouldn't be space around unary operators
+ match = Search(r'(!\s|~\s|[\s]--[\s;]|[\s]\+\+[\s;])', line)
+ if match:
+ error(filename, linenum, 'whitespace/operators', 4,
+ 'Extra space for operator %s' % match.group(1))
+
+ # A pet peeve of mine: no spaces after an if, while, switch, or for
+ match = Search(r' (if\(|for\(|while\(|switch\()', line)
+ if match:
+ error(filename, linenum, 'whitespace/parens', 5,
+ 'Missing space before ( in %s' % match.group(1))
+
+ # For if/for/while/switch, the left and right parens should be
+ # consistent about how many spaces are inside the parens, and
+ # there should either be zero or one spaces inside the parens.
+ # We don't want: "if ( foo)" or "if ( foo )".
+ # Exception: "for ( ; foo; bar)" and "for (foo; bar; )" are allowed.
+ match = Search(r'\b(if|for|while|switch)\s*'
+ r'\(([ ]*)(.).*[^ ]+([ ]*)\)\s*{\s*$',
+ line)
+ if match:
+ if len(match.group(2)) != len(match.group(4)):
+ if not (match.group(3) == ';' and
+ len(match.group(2)) == 1 + len(match.group(4)) or
+ not match.group(2) and Search(r'\bfor\s*\(.*; \)', line)):
+ error(filename, linenum, 'whitespace/parens', 5,
+ 'Mismatching spaces inside () in %s' % match.group(1))
+ if len(match.group(2)) not in [0, 1]:
+ error(filename, linenum, 'whitespace/parens', 5,
+ 'Should have zero or one spaces inside ( and ) in %s' %
+ match.group(1))
+
+ # You should always have a space after a comma (either as fn arg or operator)
+ #
+ # This does not apply when the non-space character following the
+ # comma is another comma, since the only time when that happens is
+ # for empty macro arguments.
+ #
+ # We run this check in two passes: first pass on elided lines to
+ # verify that lines contain missing whitespaces, second pass on raw
+ # lines to confirm that those missing whitespaces are not due to
+ # elided comments.
+ if Search(r',[^,\s]', line) and Search(r',[^,\s]', raw[linenum]):
+ error(filename, linenum, 'whitespace/comma', 3,
+ 'Missing space after ,')
+
+ # You should always have a space after a semicolon
+ # except for few corner cases
+ # TODO(unknown): clarify if 'if (1) { return 1;}' is requires one more
+ # space after ;
+ if Search(r';[^\s};\\)/]', line):
+ error(filename, linenum, 'whitespace/semicolon', 3,
+ 'Missing space after ;')
+
+ # Next we will look for issues with function calls.
+ CheckSpacingForFunctionCall(filename, line, linenum, error)
+
+ # Except after an opening paren, or after another opening brace (in case of
+ # an initializer list, for instance), you should have spaces before your
+ # braces. And since you should never have braces at the beginning of a line,
+ # this is an easy test.
+ match = Match(r'^(.*[^ ({]){', line)
+ if match:
+ # Try a bit harder to check for brace initialization. This
+ # happens in one of the following forms:
+ # Constructor() : initializer_list_{} { ... }
+ # Constructor{}.MemberFunction()
+ # Type variable{};
+ # FunctionCall(type{}, ...);
+ # LastArgument(..., type{});
+ # LOG(INFO) << type{} << " ...";
+ # map_of_type[{...}] = ...;
+ #
+ # We check for the character following the closing brace, and
+ # silence the warning if it's one of those listed above, i.e.
+ # "{.;,)<]".
+ #
+ # To account for nested initializer list, we allow any number of
+ # closing braces up to "{;,)<". We can't simply silence the
+ # warning on first sight of closing brace, because that would
+ # cause false negatives for things that are not initializer lists.
+ # Silence this: But not this:
+ # Outer{ if (...) {
+ # Inner{...} if (...){ // Missing space before {
+ # }; }
+ #
+ # There is a false negative with this approach if people inserted
+ # spurious semicolons, e.g. "if (cond){};", but we will catch the
+ # spurious semicolon with a separate check.
+ (endline, endlinenum, endpos) = CloseExpression(
+ clean_lines, linenum, len(match.group(1)))
+ trailing_text = ''
+ if endpos > -1:
+ trailing_text = endline[endpos:]
+ for offset in xrange(endlinenum + 1,
+ min(endlinenum + 3, clean_lines.NumLines() - 1)):
+ trailing_text += clean_lines.elided[offset]
+ if not Match(r'^[\s}]*[{.;,)<\]]', trailing_text):
+ error(filename, linenum, 'whitespace/braces', 5,
+ 'Missing space before {')
+
+ # Make sure '} else {' has spaces.
+ if Search(r'}else', line):
+ error(filename, linenum, 'whitespace/braces', 5,
+ 'Missing space before else')
+
+ # You shouldn't have spaces before your brackets, except maybe after
+ # 'delete []' or 'new char * []'.
+ if Search(r'\w\s+\[', line) and not Search(r'delete\s+\[', line):
+ error(filename, linenum, 'whitespace/braces', 5,
+ 'Extra space before [')
+
+ # You shouldn't have a space before a semicolon at the end of the line.
+ # There's a special case for "for" since the style guide allows space before
+ # the semicolon there.
+ if Search(r':\s*;\s*$', line):
+ error(filename, linenum, 'whitespace/semicolon', 5,
+ 'Semicolon defining empty statement. Use {} instead.')
+ elif Search(r'^\s*;\s*$', line):
+ error(filename, linenum, 'whitespace/semicolon', 5,
+ 'Line contains only semicolon. If this should be an empty statement, '
+ 'use {} instead.')
+ elif (Search(r'\s+;\s*$', line) and
+ not Search(r'\bfor\b', line)):
+ error(filename, linenum, 'whitespace/semicolon', 5,
+ 'Extra space before last semicolon. If this should be an empty '
+ 'statement, use {} instead.')
+
+ # In range-based for, we wanted spaces before and after the colon, but
+ # not around "::" tokens that might appear.
+ if (Search('for *\(.*[^:]:[^: ]', line) or
+ Search('for *\(.*[^: ]:[^:]', line)):
+ error(filename, linenum, 'whitespace/forcolon', 2,
+ 'Missing space around colon in range-based for loop')
+
+
+def CheckSectionSpacing(filename, clean_lines, class_info, linenum, error):
+ """Checks for additional blank line issues related to sections.
+
+ Currently the only thing checked here is blank line before protected/private.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ class_info: A _ClassInfo objects.
+ linenum: The number of the line to check.
+ error: The function to call with any errors found.
+ """
+ # Skip checks if the class is small, where small means 25 lines or less.
+ # 25 lines seems like a good cutoff since that's the usual height of
+ # terminals, and any class that can't fit in one screen can't really
+ # be considered "small".
+ #
+ # Also skip checks if we are on the first line. This accounts for
+ # classes that look like
+ # class Foo { public: ... };
+ #
+ # If we didn't find the end of the class, last_line would be zero,
+ # and the check will be skipped by the first condition.
+ if (class_info.last_line - class_info.starting_linenum <= 24 or
+ linenum <= class_info.starting_linenum):
+ return
+
+ matched = Match(r'\s*(public|protected|private):', clean_lines.lines[linenum])
+ if matched:
+ # Issue warning if the line before public/protected/private was
+ # not a blank line, but don't do this if the previous line contains
+ # "class" or "struct". This can happen two ways:
+ # - We are at the beginning of the class.
+ # - We are forward-declaring an inner class that is semantically
+ # private, but needed to be public for implementation reasons.
+ # Also ignores cases where the previous line ends with a backslash as can be
+ # common when defining classes in C macros.
+ prev_line = clean_lines.lines[linenum - 1]
+ if (not IsBlankLine(prev_line) and
+ not Search(r'\b(class|struct)\b', prev_line) and
+ not Search(r'\\$', prev_line)):
+ # Try a bit harder to find the beginning of the class. This is to
+ # account for multi-line base-specifier lists, e.g.:
+ # class Derived
+ # : public Base {
+ end_class_head = class_info.starting_linenum
+ for i in range(class_info.starting_linenum, linenum):
+ if Search(r'\{\s*$', clean_lines.lines[i]):
+ end_class_head = i
+ break
+ if end_class_head < linenum - 1:
+ error(filename, linenum, 'whitespace/blank_line', 3,
+ '"%s:" should be preceded by a blank line' % matched.group(1))
+
+
+def GetPreviousNonBlankLine(clean_lines, linenum):
+ """Return the most recent non-blank line and its line number.
+
+ Args:
+ clean_lines: A CleansedLines instance containing the file contents.
+ linenum: The number of the line to check.
+
+ Returns:
+ A tuple with two elements. The first element is the contents of the last
+ non-blank line before the current line, or the empty string if this is the
+ first non-blank line. The second is the line number of that line, or -1
+ if this is the first non-blank line.
+ """
+
+ prevlinenum = linenum - 1
+ while prevlinenum >= 0:
+ prevline = clean_lines.elided[prevlinenum]
+ if not IsBlankLine(prevline): # if not a blank line...
+ return (prevline, prevlinenum)
+ prevlinenum -= 1
+ return ('', -1)
+
+
+def CheckBraces(filename, clean_lines, linenum, error):
+ """Looks for misplaced braces (e.g. at the end of line).
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ error: The function to call with any errors found.
+ """
+
+ line = clean_lines.elided[linenum] # get rid of comments and strings
+
+ if Match(r'\s*{\s*$', line):
+ # We allow an open brace to start a line in the case where someone is using
+ # braces in a block to explicitly create a new scope, which is commonly used
+ # to control the lifetime of stack-allocated variables. Braces are also
+ # used for brace initializers inside function calls. We don't detect this
+ # perfectly: we just don't complain if the last non-whitespace character on
+ # the previous non-blank line is ',', ';', ':', '(', '{', or '}', or if the
+ # previous line starts a preprocessor block.
+ prevline = GetPreviousNonBlankLine(clean_lines, linenum)[0]
+ if (not Search(r'[,;:}{(]\s*$', prevline) and
+ not Match(r'\s*#', prevline)):
+ error(filename, linenum, 'whitespace/braces', 4,
+ '{ should almost always be at the end of the previous line')
+
+ # An else clause should be on the same line as the preceding closing brace.
+ if Match(r'\s*else\s*', line):
+ prevline = GetPreviousNonBlankLine(clean_lines, linenum)[0]
+ if Match(r'\s*}\s*$', prevline):
+ error(filename, linenum, 'whitespace/newline', 4,
+ 'An else should appear on the same line as the preceding }')
+
+ # If braces come on one side of an else, they should be on both.
+ # However, we have to worry about "else if" that spans multiple lines!
+ if Search(r'}\s*else[^{]*$', line) or Match(r'[^}]*else\s*{', line):
+ if Search(r'}\s*else if([^{]*)$', line): # could be multi-line if
+ # find the ( after the if
+ pos = line.find('else if')
+ pos = line.find('(', pos)
+ if pos > 0:
+ (endline, _, endpos) = CloseExpression(clean_lines, linenum, pos)
+ if endline[endpos:].find('{') == -1: # must be brace after if
+ error(filename, linenum, 'readability/braces', 5,
+ 'If an else has a brace on one side, it should have it on both')
+ else: # common case: else not followed by a multi-line if
+ error(filename, linenum, 'readability/braces', 5,
+ 'If an else has a brace on one side, it should have it on both')
+
+ # Likewise, an else should never have the else clause on the same line
+ if Search(r'\belse [^\s{]', line) and not Search(r'\belse if\b', line):
+ error(filename, linenum, 'whitespace/newline', 4,
+ 'Else clause should never be on same line as else (use 2 lines)')
+
+ # In the same way, a do/while should never be on one line
+ if Match(r'\s*do [^\s{]', line):
+ error(filename, linenum, 'whitespace/newline', 4,
+ 'do/while clauses should not be on a single line')
+
+ # Block bodies should not be followed by a semicolon. Due to C++11
+ # brace initialization, there are more places where semicolons are
+ # required than not, so we use a whitelist approach to check these
+ # rather than a blacklist. These are the places where "};" should
+ # be replaced by just "}":
+ # 1. Some flavor of block following closing parenthesis:
+ # for (;;) {};
+ # while (...) {};
+ # switch (...) {};
+ # Function(...) {};
+ # if (...) {};
+ # if (...) else if (...) {};
+ #
+ # 2. else block:
+ # if (...) else {};
+ #
+ # 3. const member function:
+ # Function(...) const {};
+ #
+ # 4. Block following some statement:
+ # x = 42;
+ # {};
+ #
+ # 5. Block at the beginning of a function:
+ # Function(...) {
+ # {};
+ # }
+ #
+ # Note that naively checking for the preceding "{" will also match
+ # braces inside multi-dimensional arrays, but this is fine since
+ # that expression will not contain semicolons.
+ #
+ # 6. Block following another block:
+ # while (true) {}
+ # {};
+ #
+ # 7. End of namespaces:
+ # namespace {};
+ #
+ # These semicolons seems far more common than other kinds of
+ # redundant semicolons, possibly due to people converting classes
+ # to namespaces. For now we do not warn for this case.
+ #
+ # Try matching case 1 first.
+ match = Match(r'^(.*\)\s*)\{', line)
+ if match:
+ # Matched closing parenthesis (case 1). Check the token before the
+ # matching opening parenthesis, and don't warn if it looks like a
+ # macro. This avoids these false positives:
+ # - macro that defines a base class
+ # - multi-line macro that defines a base class
+ # - macro that defines the whole class-head
+ #
+ # But we still issue warnings for macros that we know are safe to
+ # warn, specifically:
+ # - TEST, TEST_F, TEST_P, MATCHER, MATCHER_P
+ # - TYPED_TEST
+ # - INTERFACE_DEF
+ # - EXCLUSIVE_LOCKS_REQUIRED, SHARED_LOCKS_REQUIRED, LOCKS_EXCLUDED:
+ #
+ # We implement a whitelist of safe macros instead of a blacklist of
+ # unsafe macros, even though the latter appears less frequently in
+ # google code and would have been easier to implement. This is because
+ # the downside for getting the whitelist wrong means some extra
+ # semicolons, while the downside for getting the blacklist wrong
+ # would result in compile errors.
+ #
+ # In addition to macros, we also don't want to warn on compound
+ # literals.
+ closing_brace_pos = match.group(1).rfind(')')
+ opening_parenthesis = ReverseCloseExpression(
+ clean_lines, linenum, closing_brace_pos)
+ if opening_parenthesis[2] > -1:
+ line_prefix = opening_parenthesis[0][0:opening_parenthesis[2]]
+ macro = Search(r'\b([A-Z_]+)\s*$', line_prefix)
+ if ((macro and
+ macro.group(1) not in (
+ 'TEST', 'TEST_F', 'MATCHER', 'MATCHER_P', 'TYPED_TEST',
+ 'EXCLUSIVE_LOCKS_REQUIRED', 'SHARED_LOCKS_REQUIRED',
+ 'LOCKS_EXCLUDED', 'INTERFACE_DEF')) or
+ Search(r'\s+=\s*$', line_prefix)):
+ match = None
+
+ else:
+ # Try matching cases 2-3.
+ match = Match(r'^(.*(?:else|\)\s*const)\s*)\{', line)
+ if not match:
+ # Try matching cases 4-6. These are always matched on separate lines.
+ #
+ # Note that we can't simply concatenate the previous line to the
+ # current line and do a single match, otherwise we may output
+ # duplicate warnings for the blank line case:
+ # if (cond) {
+ # // blank line
+ # }
+ prevline = GetPreviousNonBlankLine(clean_lines, linenum)[0]
+ if prevline and Search(r'[;{}]\s*$', prevline):
+ match = Match(r'^(\s*)\{', line)
+
+ # Check matching closing brace
+ if match:
+ (endline, endlinenum, endpos) = CloseExpression(
+ clean_lines, linenum, len(match.group(1)))
+ if endpos > -1 and Match(r'^\s*;', endline[endpos:]):
+ # Current {} pair is eligible for semicolon check, and we have found
+ # the redundant semicolon, output warning here.
+ #
+ # Note: because we are scanning forward for opening braces, and
+ # outputting warnings for the matching closing brace, if there are
+ # nested blocks with trailing semicolons, we will get the error
+ # messages in reversed order.
+ error(filename, endlinenum, 'readability/braces', 4,
+ "You don't need a ; after a }")
+
+
+def CheckEmptyBlockBody(filename, clean_lines, linenum, error):
+ """Look for empty loop/conditional body with only a single semicolon.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ error: The function to call with any errors found.
+ """
+
+ # Search for loop keywords at the beginning of the line. Because only
+ # whitespaces are allowed before the keywords, this will also ignore most
+ # do-while-loops, since those lines should start with closing brace.
+ #
+ # We also check "if" blocks here, since an empty conditional block
+ # is likely an error.
+ line = clean_lines.elided[linenum]
+ matched = Match(r'\s*(for|while|if)\s*\(', line)
+ if matched:
+ # Find the end of the conditional expression
+ (end_line, end_linenum, end_pos) = CloseExpression(
+ clean_lines, linenum, line.find('('))
+
+ # Output warning if what follows the condition expression is a semicolon.
+ # No warning for all other cases, including whitespace or newline, since we
+ # have a separate check for semicolons preceded by whitespace.
+ if end_pos >= 0 and Match(r';', end_line[end_pos:]):
+ if matched.group(1) == 'if':
+ error(filename, end_linenum, 'whitespace/empty_conditional_body', 5,
+ 'Empty conditional bodies should use {}')
+ else:
+ error(filename, end_linenum, 'whitespace/empty_loop_body', 5,
+ 'Empty loop bodies should use {} or continue')
+
+
+def CheckCheck(filename, clean_lines, linenum, error):
+ """Checks the use of CHECK and EXPECT macros.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ error: The function to call with any errors found.
+ """
+
+ # Decide the set of replacement macros that should be suggested
+ lines = clean_lines.elided
+ check_macro = None
+ start_pos = -1
+ for macro in _CHECK_MACROS:
+ i = lines[linenum].find(macro)
+ if i >= 0:
+ check_macro = macro
+
+ # Find opening parenthesis. Do a regular expression match here
+ # to make sure that we are matching the expected CHECK macro, as
+ # opposed to some other macro that happens to contain the CHECK
+ # substring.
+ matched = Match(r'^(.*\b' + check_macro + r'\s*)\(', lines[linenum])
+ if not matched:
+ continue
+ start_pos = len(matched.group(1))
+ break
+ if not check_macro or start_pos < 0:
+ # Don't waste time here if line doesn't contain 'CHECK' or 'EXPECT'
+ return
+
+ # Find end of the boolean expression by matching parentheses
+ (last_line, end_line, end_pos) = CloseExpression(
+ clean_lines, linenum, start_pos)
+ if end_pos < 0:
+ return
+ if linenum == end_line:
+ expression = lines[linenum][start_pos + 1:end_pos - 1]
+ else:
+ expression = lines[linenum][start_pos + 1:]
+ for i in xrange(linenum + 1, end_line):
+ expression += lines[i]
+ expression += last_line[0:end_pos - 1]
+
+ # Parse expression so that we can take parentheses into account.
+ # This avoids false positives for inputs like "CHECK((a < 4) == b)",
+ # which is not replaceable by CHECK_LE.
+ lhs = ''
+ rhs = ''
+ operator = None
+ while expression:
+ matched = Match(r'^\s*(<<|<<=|>>|>>=|->\*|->|&&|\|\||'
+ r'==|!=|>=|>|<=|<|\()(.*)$', expression)
+ if matched:
+ token = matched.group(1)
+ if token == '(':
+ # Parenthesized operand
+ expression = matched.group(2)
+ (end, _) = FindEndOfExpressionInLine(expression, 0, 1, '(', ')')
+ if end < 0:
+ return # Unmatched parenthesis
+ lhs += '(' + expression[0:end]
+ expression = expression[end:]
+ elif token in ('&&', '||'):
+ # Logical and/or operators. This means the expression
+ # contains more than one term, for example:
+ # CHECK(42 < a && a < b);
+ #
+ # These are not replaceable with CHECK_LE, so bail out early.
+ return
+ elif token in ('<<', '<<=', '>>', '>>=', '->*', '->'):
+ # Non-relational operator
+ lhs += token
+ expression = matched.group(2)
+ else:
+ # Relational operator
+ operator = token
+ rhs = matched.group(2)
+ break
+ else:
+ # Unparenthesized operand. Instead of appending to lhs one character
+ # at a time, we do another regular expression match to consume several
+ # characters at once if possible. Trivial benchmark shows that this
+ # is more efficient when the operands are longer than a single
+ # character, which is generally the case.
+ matched = Match(r'^([^-=!<>()&|]+)(.*)$', expression)
+ if not matched:
+ matched = Match(r'^(\s*\S)(.*)$', expression)
+ if not matched:
+ break
+ lhs += matched.group(1)
+ expression = matched.group(2)
+
+ # Only apply checks if we got all parts of the boolean expression
+ if not (lhs and operator and rhs):
+ return
+
+ # Check that rhs do not contain logical operators. We already know
+ # that lhs is fine since the loop above parses out && and ||.
+ if rhs.find('&&') > -1 or rhs.find('||') > -1:
+ return
+
+ # At least one of the operands must be a constant literal. This is
+ # to avoid suggesting replacements for unprintable things like
+ # CHECK(variable != iterator)
+ #
+ # The following pattern matches decimal, hex integers, strings, and
+ # characters (in that order).
+ lhs = lhs.strip()
+ rhs = rhs.strip()
+ match_constant = r'^([-+]?(\d+|0[xX][0-9a-fA-F]+)[lLuU]{0,3}|".*"|\'.*\')$'
+ if Match(match_constant, lhs) or Match(match_constant, rhs):
+ # Note: since we know both lhs and rhs, we can provide a more
+ # descriptive error message like:
+ # Consider using CHECK_EQ(x, 42) instead of CHECK(x == 42)
+ # Instead of:
+ # Consider using CHECK_EQ instead of CHECK(a == b)
+ #
+ # We are still keeping the less descriptive message because if lhs
+ # or rhs gets long, the error message might become unreadable.
+ error(filename, linenum, 'readability/check', 2,
+ 'Consider using %s instead of %s(a %s b)' % (
+ _CHECK_REPLACEMENT[check_macro][operator],
+ check_macro, operator))
+
+
+def CheckAltTokens(filename, clean_lines, linenum, error):
+ """Check alternative keywords being used in boolean expressions.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ error: The function to call with any errors found.
+ """
+ line = clean_lines.elided[linenum]
+
+ # Avoid preprocessor lines
+ if Match(r'^\s*#', line):
+ return
+
+ # Last ditch effort to avoid multi-line comments. This will not help
+ # if the comment started before the current line or ended after the
+ # current line, but it catches most of the false positives. At least,
+ # it provides a way to workaround this warning for people who use
+ # multi-line comments in preprocessor macros.
+ #
+ # TODO(unknown): remove this once cpplint has better support for
+ # multi-line comments.
+ if line.find('/*') >= 0 or line.find('*/') >= 0:
+ return
+
+ for match in _ALT_TOKEN_REPLACEMENT_PATTERN.finditer(line):
+ error(filename, linenum, 'readability/alt_tokens', 2,
+ 'Use operator %s instead of %s' % (
+ _ALT_TOKEN_REPLACEMENT[match.group(1)], match.group(1)))
+
+
+def GetLineWidth(line):
+ """Determines the width of the line in column positions.
+
+ Args:
+ line: A string, which may be a Unicode string.
+
+ Returns:
+ The width of the line in column positions, accounting for Unicode
+ combining characters and wide characters.
+ """
+ if isinstance(line, unicode):
+ width = 0
+ for uc in unicodedata.normalize('NFC', line):
+ if unicodedata.east_asian_width(uc) in ('W', 'F'):
+ width += 2
+ elif not unicodedata.combining(uc):
+ width += 1
+ return width
+ else:
+ return len(line)
+
+
+def CheckStyle(filename, clean_lines, linenum, file_extension, nesting_state,
+ error):
+ """Checks rules from the 'C++ style rules' section of cppguide.html.
+
+ Most of these rules are hard to test (naming, comment style), but we
+ do what we can. In particular we check for 2-space indents, line lengths,
+ tab usage, spaces inside code, etc.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ file_extension: The extension (without the dot) of the filename.
+ nesting_state: A _NestingState instance which maintains information about
+ the current stack of nested blocks being parsed.
+ error: The function to call with any errors found.
+ """
+
+ # Don't use "elided" lines here, otherwise we can't check commented lines.
+ # Don't want to use "raw" either, because we don't want to check inside C++11
+ # raw strings,
+ raw_lines = clean_lines.lines_without_raw_strings
+ line = raw_lines[linenum]
+
+ if line.find('\t') != -1:
+ error(filename, linenum, 'whitespace/tab', 1,
+ 'Tab found; better to use spaces')
+
+ # One or three blank spaces at the beginning of the line is weird; it's
+ # hard to reconcile that with 2-space indents.
+ # NOTE: here are the conditions rob pike used for his tests. Mine aren't
+ # as sophisticated, but it may be worth becoming so: RLENGTH==initial_spaces
+ # if(RLENGTH > 20) complain = 0;
+ # if(match($0, " +(error|private|public|protected):")) complain = 0;
+ # if(match(prev, "&& *$")) complain = 0;
+ # if(match(prev, "\\|\\| *$")) complain = 0;
+ # if(match(prev, "[\",=><] *$")) complain = 0;
+ # if(match($0, " <<")) complain = 0;
+ # if(match(prev, " +for \\(")) complain = 0;
+ # if(prevodd && match(prevprev, " +for \\(")) complain = 0;
+ initial_spaces = 0
+ cleansed_line = clean_lines.elided[linenum]
+ while initial_spaces < len(line) and line[initial_spaces] == ' ':
+ initial_spaces += 1
+ if line and line[-1].isspace():
+ error(filename, linenum, 'whitespace/end_of_line', 4,
+ 'Line ends in whitespace. Consider deleting these extra spaces.')
+ # There are certain situations we allow one space, notably for section labels
+ elif ((initial_spaces == 1 or initial_spaces == 3) and
+ not Match(r'\s*\w+\s*:\s*$', cleansed_line)):
+ error(filename, linenum, 'whitespace/indent', 3,
+ 'Weird number of spaces at line-start. '
+ 'Are you using a 2-space indent?')
+
+ # Check if the line is a header guard.
+ is_header_guard = False
+ if file_extension == 'h':
+ cppvar = GetHeaderGuardCPPVariable(filename)
+ if (line.startswith('#ifndef %s' % cppvar) or
+ line.startswith('#define %s' % cppvar) or
+ line.startswith('#endif // %s' % cppvar)):
+ is_header_guard = True
+ # #include lines and header guards can be long, since there's no clean way to
+ # split them.
+ #
+ # URLs can be long too. It's possible to split these, but it makes them
+ # harder to cut&paste.
+ #
+ # The "$Id:...$" comment may also get very long without it being the
+ # developers fault.
+ if (not line.startswith('#include') and not is_header_guard and
+ not Match(r'^\s*//.*http(s?)://\S*$', line) and
+ not Match(r'^// \$Id:.*#[0-9]+ \$$', line)):
+ line_width = GetLineWidth(line)
+ extended_length = int((_line_length * 1.25))
+ if line_width > extended_length:
+ error(filename, linenum, 'whitespace/line_length', 4,
+ 'Lines should very rarely be longer than %i characters' %
+ extended_length)
+ elif line_width > _line_length:
+ error(filename, linenum, 'whitespace/line_length', 2,
+ 'Lines should be <= %i characters long' % _line_length)
+
+ if (cleansed_line.count(';') > 1 and
+ # for loops are allowed two ;'s (and may run over two lines).
+ cleansed_line.find('for') == -1 and
+ (GetPreviousNonBlankLine(clean_lines, linenum)[0].find('for') == -1 or
+ GetPreviousNonBlankLine(clean_lines, linenum)[0].find(';') != -1) and
+ # It's ok to have many commands in a switch case that fits in 1 line
+ not ((cleansed_line.find('case ') != -1 or
+ cleansed_line.find('default:') != -1) and
+ cleansed_line.find('break;') != -1)):
+ error(filename, linenum, 'whitespace/newline', 0,
+ 'More than one command on the same line')
+
+ # Some more style checks
+ CheckBraces(filename, clean_lines, linenum, error)
+ CheckEmptyBlockBody(filename, clean_lines, linenum, error)
+ CheckAccess(filename, clean_lines, linenum, nesting_state, error)
+ CheckSpacing(filename, clean_lines, linenum, nesting_state, error)
+ CheckCheck(filename, clean_lines, linenum, error)
+ CheckAltTokens(filename, clean_lines, linenum, error)
+ classinfo = nesting_state.InnermostClass()
+ if classinfo:
+ CheckSectionSpacing(filename, clean_lines, classinfo, linenum, error)
+
+
+_RE_PATTERN_INCLUDE_NEW_STYLE = re.compile(r'#include +"[^/]+\.h"')
+_RE_PATTERN_INCLUDE = re.compile(r'^\s*#\s*include\s*([<"])([^>"]*)[>"].*$')
+# Matches the first component of a filename delimited by -s and _s. That is:
+# _RE_FIRST_COMPONENT.match('foo').group(0) == 'foo'
+# _RE_FIRST_COMPONENT.match('foo.cc').group(0) == 'foo'
+# _RE_FIRST_COMPONENT.match('foo-bar_baz.cc').group(0) == 'foo'
+# _RE_FIRST_COMPONENT.match('foo_bar-baz.cc').group(0) == 'foo'
+_RE_FIRST_COMPONENT = re.compile(r'^[^-_.]+')
+
+
+def _DropCommonSuffixes(filename):
+ """Drops common suffixes like _test.cc or -inl.h from filename.
+
+ For example:
+ >>> _DropCommonSuffixes('foo/foo-inl.h')
+ 'foo/foo'
+ >>> _DropCommonSuffixes('foo/bar/foo.cc')
+ 'foo/bar/foo'
+ >>> _DropCommonSuffixes('foo/foo_internal.h')
+ 'foo/foo'
+ >>> _DropCommonSuffixes('foo/foo_unusualinternal.h')
+ 'foo/foo_unusualinternal'
+
+ Args:
+ filename: The input filename.
+
+ Returns:
+ The filename with the common suffix removed.
+ """
+ for suffix in ('test.cc', 'regtest.cc', 'unittest.cc',
+ 'inl.h', 'impl.h', 'internal.h'):
+ if (filename.endswith(suffix) and len(filename) > len(suffix) and
+ filename[-len(suffix) - 1] in ('-', '_')):
+ return filename[:-len(suffix) - 1]
+ return os.path.splitext(filename)[0]
+
+
+def _IsTestFilename(filename):
+ """Determines if the given filename has a suffix that identifies it as a test.
+
+ Args:
+ filename: The input filename.
+
+ Returns:
+ True if 'filename' looks like a test, False otherwise.
+ """
+ if (filename.endswith('_test.cc') or
+ filename.endswith('_unittest.cc') or
+ filename.endswith('_regtest.cc')):
+ return True
+ else:
+ return False
+
+
+def _ClassifyInclude(fileinfo, include, is_system):
+ """Figures out what kind of header 'include' is.
+
+ Args:
+ fileinfo: The current file cpplint is running over. A FileInfo instance.
+ include: The path to a #included file.
+ is_system: True if the #include used <> rather than "".
+
+ Returns:
+ One of the _XXX_HEADER constants.
+
+ For example:
+ >>> _ClassifyInclude(FileInfo('foo/foo.cc'), 'stdio.h', True)
+ _C_SYS_HEADER
+ >>> _ClassifyInclude(FileInfo('foo/foo.cc'), 'string', True)
+ _CPP_SYS_HEADER
+ >>> _ClassifyInclude(FileInfo('foo/foo.cc'), 'foo/foo.h', False)
+ _LIKELY_MY_HEADER
+ >>> _ClassifyInclude(FileInfo('foo/foo_unknown_extension.cc'),
+ ... 'bar/foo_other_ext.h', False)
+ _POSSIBLE_MY_HEADER
+ >>> _ClassifyInclude(FileInfo('foo/foo.cc'), 'foo/bar.h', False)
+ _OTHER_HEADER
+ """
+ # This is a list of all standard c++ header files, except
+ # those already checked for above.
+ is_cpp_h = include in _CPP_HEADERS
+
+ if is_system:
+ if is_cpp_h:
+ return _CPP_SYS_HEADER
+ else:
+ return _C_SYS_HEADER
+
+ # If the target file and the include we're checking share a
+ # basename when we drop common extensions, and the include
+ # lives in . , then it's likely to be owned by the target file.
+ target_dir, target_base = (
+ os.path.split(_DropCommonSuffixes(fileinfo.RepositoryName())))
+ include_dir, include_base = os.path.split(_DropCommonSuffixes(include))
+ if target_base == include_base and (
+ include_dir == target_dir or
+ include_dir == os.path.normpath(target_dir + '/../public')):
+ return _LIKELY_MY_HEADER
+
+ # If the target and include share some initial basename
+ # component, it's possible the target is implementing the
+ # include, so it's allowed to be first, but we'll never
+ # complain if it's not there.
+ target_first_component = _RE_FIRST_COMPONENT.match(target_base)
+ include_first_component = _RE_FIRST_COMPONENT.match(include_base)
+ if (target_first_component and include_first_component and
+ target_first_component.group(0) ==
+ include_first_component.group(0)):
+ return _POSSIBLE_MY_HEADER
+
+ return _OTHER_HEADER
+
+
+
+def CheckIncludeLine(filename, clean_lines, linenum, include_state, error):
+ """Check rules that are applicable to #include lines.
+
+ Strings on #include lines are NOT removed from elided line, to make
+ certain tasks easier. However, to prevent false positives, checks
+ applicable to #include lines in CheckLanguage must be put here.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ include_state: An _IncludeState instance in which the headers are inserted.
+ error: The function to call with any errors found.
+ """
+ fileinfo = FileInfo(filename)
+
+ line = clean_lines.lines[linenum]
+
+ # "include" should use the new style "foo/bar.h" instead of just "bar.h"
+ if _RE_PATTERN_INCLUDE_NEW_STYLE.search(line):
+ error(filename, linenum, 'build/include', 4,
+ 'Include the directory when naming .h files')
+
+ # we shouldn't include a file more than once. actually, there are a
+ # handful of instances where doing so is okay, but in general it's
+ # not.
+ match = _RE_PATTERN_INCLUDE.search(line)
+ if match:
+ include = match.group(2)
+ is_system = (match.group(1) == '<')
+ if include in include_state:
+ error(filename, linenum, 'build/include', 4,
+ '"%s" already included at %s:%s' %
+ (include, filename, include_state[include]))
+ else:
+ include_state[include] = linenum
+
+ # We want to ensure that headers appear in the right order:
+ # 1) for foo.cc, foo.h (preferred location)
+ # 2) c system files
+ # 3) cpp system files
+ # 4) for foo.cc, foo.h (deprecated location)
+ # 5) other google headers
+ #
+ # We classify each include statement as one of those 5 types
+ # using a number of techniques. The include_state object keeps
+ # track of the highest type seen, and complains if we see a
+ # lower type after that.
+ error_message = include_state.CheckNextIncludeOrder(
+ _ClassifyInclude(fileinfo, include, is_system))
+ if error_message:
+ error(filename, linenum, 'build/include_order', 4,
+ '%s. Should be: %s.h, c system, c++ system, other.' %
+ (error_message, fileinfo.BaseName()))
+ canonical_include = include_state.CanonicalizeAlphabeticalOrder(include)
+ if not include_state.IsInAlphabeticalOrder(
+ clean_lines, linenum, canonical_include):
+ error(filename, linenum, 'build/include_alpha', 4,
+ 'Include "%s" not in alphabetical order' % include)
+ include_state.SetLastHeader(canonical_include)
+
+ # Look for any of the stream classes that are part of standard C++.
+ match = _RE_PATTERN_INCLUDE.match(line)
+ if match:
+ include = match.group(2)
+ if Match(r'(f|ind|io|i|o|parse|pf|stdio|str|)?stream$', include):
+ # Many unit tests use cout, so we exempt them.
+ if not _IsTestFilename(filename):
+ error(filename, linenum, 'readability/streams', 3,
+ 'Streams are highly discouraged.')
+
+
+def _GetTextInside(text, start_pattern):
+ r"""Retrieves all the text between matching open and close parentheses.
+
+ Given a string of lines and a regular expression string, retrieve all the text
+ following the expression and between opening punctuation symbols like
+ (, [, or {, and the matching close-punctuation symbol. This properly nested
+ occurrences of the punctuations, so for the text like
+ printf(a(), b(c()));
+ a call to _GetTextInside(text, r'printf\(') will return 'a(), b(c())'.
+ start_pattern must match string having an open punctuation symbol at the end.
+
+ Args:
+ text: The lines to extract text. Its comments and strings must be elided.
+ It can be single line and can span multiple lines.
+ start_pattern: The regexp string indicating where to start extracting
+ the text.
+ Returns:
+ The extracted text.
+ None if either the opening string or ending punctuation could not be found.
+ """
+ # TODO(sugawarayu): Audit cpplint.py to see what places could be profitably
+ # rewritten to use _GetTextInside (and use inferior regexp matching today).
+
+ # Give opening punctuations to get the matching close-punctuations.
+ matching_punctuation = {'(': ')', '{': '}', '[': ']'}
+ closing_punctuation = set(matching_punctuation.itervalues())
+
+ # Find the position to start extracting text.
+ match = re.search(start_pattern, text, re.M)
+ if not match: # start_pattern not found in text.
+ return None
+ start_position = match.end(0)
+
+ assert start_position > 0, (
+ 'start_pattern must ends with an opening punctuation.')
+ assert text[start_position - 1] in matching_punctuation, (
+ 'start_pattern must ends with an opening punctuation.')
+ # Stack of closing punctuations we expect to have in text after position.
+ punctuation_stack = [matching_punctuation[text[start_position - 1]]]
+ position = start_position
+ while punctuation_stack and position < len(text):
+ if text[position] == punctuation_stack[-1]:
+ punctuation_stack.pop()
+ elif text[position] in closing_punctuation:
+ # A closing punctuation without matching opening punctuations.
+ return None
+ elif text[position] in matching_punctuation:
+ punctuation_stack.append(matching_punctuation[text[position]])
+ position += 1
+ if punctuation_stack:
+ # Opening punctuations left without matching close-punctuations.
+ return None
+ # punctuations match.
+ return text[start_position:position - 1]
+
+
+# Patterns for matching call-by-reference parameters.
+#
+# Supports nested templates up to 2 levels deep using this messy pattern:
+# < (?: < (?: < [^<>]*
+# >
+# | [^<>] )*
+# >
+# | [^<>] )*
+# >
+_RE_PATTERN_IDENT = r'[_a-zA-Z]\w*' # =~ [[:alpha:]][[:alnum:]]*
+_RE_PATTERN_TYPE = (
+ r'(?:const\s+)?(?:typename\s+|class\s+|struct\s+|union\s+|enum\s+)?'
+ r'(?:\w|'
+ r'\s*<(?:<(?:<[^<>]*>|[^<>])*>|[^<>])*>|'
+ r'::)+')
+# A call-by-reference parameter ends with '& identifier'.
+_RE_PATTERN_REF_PARAM = re.compile(
+ r'(' + _RE_PATTERN_TYPE + r'(?:\s*(?:\bconst\b|[*]))*\s*'
+ r'&\s*' + _RE_PATTERN_IDENT + r')\s*(?:=[^,()]+)?[,)]')
+# A call-by-const-reference parameter either ends with 'const& identifier'
+# or looks like 'const type& identifier' when 'type' is atomic.
+_RE_PATTERN_CONST_REF_PARAM = (
+ r'(?:.*\s*\bconst\s*&\s*' + _RE_PATTERN_IDENT +
+ r'|const\s+' + _RE_PATTERN_TYPE + r'\s*&\s*' + _RE_PATTERN_IDENT + r')')
+
+
+def CheckLanguage(filename, clean_lines, linenum, file_extension,
+ include_state, nesting_state, error):
+ """Checks rules from the 'C++ language rules' section of cppguide.html.
+
+ Some of these rules are hard to test (function overloading, using
+ uint32 inappropriately), but we do the best we can.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ file_extension: The extension (without the dot) of the filename.
+ include_state: An _IncludeState instance in which the headers are inserted.
+ nesting_state: A _NestingState instance which maintains information about
+ the current stack of nested blocks being parsed.
+ error: The function to call with any errors found.
+ """
+ # If the line is empty or consists of entirely a comment, no need to
+ # check it.
+ line = clean_lines.elided[linenum]
+ if not line:
+ return
+
+ match = _RE_PATTERN_INCLUDE.search(line)
+ if match:
+ CheckIncludeLine(filename, clean_lines, linenum, include_state, error)
+ return
+
+ # Reset include state across preprocessor directives. This is meant
+ # to silence warnings for conditional includes.
+ if Match(r'^\s*#\s*(?:ifdef|elif|else|endif)\b', line):
+ include_state.ResetSection()
+
+ # Make Windows paths like Unix.
+ fullname = os.path.abspath(filename).replace('\\', '/')
+
+ # TODO(unknown): figure out if they're using default arguments in fn proto.
+
+ # Check to see if they're using an conversion function cast.
+ # I just try to capture the most common basic types, though there are more.
+ # Parameterless conversion functions, such as bool(), are allowed as they are
+ # probably a member operator declaration or default constructor.
+ match = Search(
+ r'(\bnew\s+)?\b' # Grab 'new' operator, if it's there
+ r'(int|float|double|bool|char|int32|uint32|int64|uint64)'
+ r'(\([^)].*)', line)
+ if match:
+ matched_new = match.group(1)
+ matched_type = match.group(2)
+ matched_funcptr = match.group(3)
+
+ # gMock methods are defined using some variant of MOCK_METHODx(name, type)
+ # where type may be float(), int(string), etc. Without context they are
+ # virtually indistinguishable from int(x) casts. Likewise, gMock's
+ # MockCallback takes a template parameter of the form return_type(arg_type),
+ # which looks much like the cast we're trying to detect.
+ #
+ # std::function<> wrapper has a similar problem.
+ #
+ # Return types for function pointers also look like casts if they
+ # don't have an extra space.
+ if (matched_new is None and # If new operator, then this isn't a cast
+ not (Match(r'^\s*MOCK_(CONST_)?METHOD\d+(_T)?\(', line) or
+ Search(r'\bMockCallback<.*>', line) or
+ Search(r'\bstd::function<.*>', line)) and
+ not (matched_funcptr and
+ Match(r'\((?:[^() ]+::\s*\*\s*)?[^() ]+\)\s*\(',
+ matched_funcptr))):
+ # Try a bit harder to catch gmock lines: the only place where
+ # something looks like an old-style cast is where we declare the
+ # return type of the mocked method, and the only time when we
+ # are missing context is if MOCK_METHOD was split across
+ # multiple lines. The missing MOCK_METHOD is usually one or two
+ # lines back, so scan back one or two lines.
+ #
+ # It's not possible for gmock macros to appear in the first 2
+ # lines, since the class head + section name takes up 2 lines.
+ if (linenum < 2 or
+ not (Match(r'^\s*MOCK_(?:CONST_)?METHOD\d+(?:_T)?\((?:\S+,)?\s*$',
+ clean_lines.elided[linenum - 1]) or
+ Match(r'^\s*MOCK_(?:CONST_)?METHOD\d+(?:_T)?\(\s*$',
+ clean_lines.elided[linenum - 2]))):
+ error(filename, linenum, 'readability/casting', 4,
+ 'Using deprecated casting style. '
+ 'Use static_cast<%s>(...) instead' %
+ matched_type)
+
+ CheckCStyleCast(filename, linenum, line, clean_lines.raw_lines[linenum],
+ 'static_cast',
+ r'\((int|float|double|bool|char|u?int(16|32|64))\)', error)
+
+ # This doesn't catch all cases. Consider (const char * const)"hello".
+ #
+ # (char *) "foo" should always be a const_cast (reinterpret_cast won't
+ # compile).
+ if CheckCStyleCast(filename, linenum, line, clean_lines.raw_lines[linenum],
+ 'const_cast', r'\((char\s?\*+\s?)\)\s*"', error):
+ pass
+ else:
+ # Check pointer casts for other than string constants
+ CheckCStyleCast(filename, linenum, line, clean_lines.raw_lines[linenum],
+ 'reinterpret_cast', r'\((\w+\s?\*+\s?)\)', error)
+
+ # In addition, we look for people taking the address of a cast. This
+ # is dangerous -- casts can assign to temporaries, so the pointer doesn't
+ # point where you think.
+ match = Search(
+ r'(?:&\(([^)]+)\)[\w(])|'
+ r'(?:&(static|dynamic|down|reinterpret)_cast\b)', line)
+ if match and match.group(1) != '*':
+ error(filename, linenum, 'runtime/casting', 4,
+ ('Are you taking an address of a cast? '
+ 'This is dangerous: could be a temp var. '
+ 'Take the address before doing the cast, rather than after'))
+
+ # Create an extended_line, which is the concatenation of the current and
+ # next lines, for more effective checking of code that may span more than one
+ # line.
+ if linenum + 1 < clean_lines.NumLines():
+ extended_line = line + clean_lines.elided[linenum + 1]
+ else:
+ extended_line = line
+
+ # Check for people declaring static/global STL strings at the top level.
+ # This is dangerous because the C++ language does not guarantee that
+ # globals with constructors are initialized before the first access.
+ match = Match(
+ r'((?:|static +)(?:|const +))string +([a-zA-Z0-9_:]+)\b(.*)',
+ line)
+ # Make sure it's not a function.
+ # Function template specialization looks like: "string foo<Type>(...".
+ # Class template definitions look like: "string Foo<Type>::Method(...".
+ #
+ # Also ignore things that look like operators. These are matched separately
+ # because operator names cross non-word boundaries. If we change the pattern
+ # above, we would decrease the accuracy of matching identifiers.
+ if (match and
+ not Search(r'\boperator\W', line) and
+ not Match(r'\s*(<.*>)?(::[a-zA-Z0-9_]+)?\s*\(([^"]|$)', match.group(3))):
+ error(filename, linenum, 'runtime/string', 4,
+ 'For a static/global string constant, use a C style string instead: '
+ '"%schar %s[]".' %
+ (match.group(1), match.group(2)))
+
+ if Search(r'\b([A-Za-z0-9_]*_)\(\1\)', line):
+ error(filename, linenum, 'runtime/init', 4,
+ 'You seem to be initializing a member variable with itself.')
+
+ if file_extension == 'h':
+ # TODO(unknown): check that 1-arg constructors are explicit.
+ # How to tell it's a constructor?
+ # (handled in CheckForNonStandardConstructs for now)
+ # TODO(unknown): check that classes have DISALLOW_EVIL_CONSTRUCTORS
+ # (level 1 error)
+ pass
+
+ # Check if people are using the verboten C basic types. The only exception
+ # we regularly allow is "unsigned short port" for port.
+ if Search(r'\bshort port\b', line):
+ if not Search(r'\bunsigned short port\b', line):
+ error(filename, linenum, 'runtime/int', 4,
+ 'Use "unsigned short" for ports, not "short"')
+ else:
+ match = Search(r'\b(short|long(?! +double)|long long)\b', line)
+ if match:
+ error(filename, linenum, 'runtime/int', 4,
+ 'Use int16/int64/etc, rather than the C type %s' % match.group(1))
+
+ # When snprintf is used, the second argument shouldn't be a literal.
+ match = Search(r'snprintf\s*\(([^,]*),\s*([0-9]*)\s*,', line)
+ if match and match.group(2) != '0':
+ # If 2nd arg is zero, snprintf is used to calculate size.
+ error(filename, linenum, 'runtime/printf', 3,
+ 'If you can, use sizeof(%s) instead of %s as the 2nd arg '
+ 'to snprintf.' % (match.group(1), match.group(2)))
+
+ # Check if some verboten C functions are being used.
+ if Search(r'\bsprintf\b', line):
+ error(filename, linenum, 'runtime/printf', 5,
+ 'Never use sprintf. Use snprintf instead.')
+ match = Search(r'\b(strcpy|strcat)\b', line)
+ if match:
+ error(filename, linenum, 'runtime/printf', 4,
+ 'Almost always, snprintf is better than %s' % match.group(1))
+
+ # Check if some verboten operator overloading is going on
+ # TODO(unknown): catch out-of-line unary operator&:
+ # class X {};
+ # int operator&(const X& x) { return 42; } // unary operator&
+ # The trick is it's hard to tell apart from binary operator&:
+ # class Y { int operator&(const Y& x) { return 23; } }; // binary operator&
+ if Search(r'\boperator\s*&\s*\(\s*\)', line):
+ error(filename, linenum, 'runtime/operator', 4,
+ 'Unary operator& is dangerous. Do not use it.')
+
+ # Check for suspicious usage of "if" like
+ # } if (a == b) {
+ if Search(r'\}\s*if\s*\(', line):
+ error(filename, linenum, 'readability/braces', 4,
+ 'Did you mean "else if"? If not, start a new line for "if".')
+
+ # Check for potential format string bugs like printf(foo).
+ # We constrain the pattern not to pick things like DocidForPrintf(foo).
+ # Not perfect but it can catch printf(foo.c_str()) and printf(foo->c_str())
+ # TODO(sugawarayu): Catch the following case. Need to change the calling
+ # convention of the whole function to process multiple line to handle it.
+ # printf(
+ # boy_this_is_a_really_long_variable_that_cannot_fit_on_the_prev_line);
+ printf_args = _GetTextInside(line, r'(?i)\b(string)?printf\s*\(')
+ if printf_args:
+ match = Match(r'([\w.\->()]+)$', printf_args)
+ if match and match.group(1) != '__VA_ARGS__':
+ function_name = re.search(r'\b((?:string)?printf)\s*\(',
+ line, re.I).group(1)
+ error(filename, linenum, 'runtime/printf', 4,
+ 'Potential format string bug. Do %s("%%s", %s) instead.'
+ % (function_name, match.group(1)))
+
+ # Check for potential memset bugs like memset(buf, sizeof(buf), 0).
+ match = Search(r'memset\s*\(([^,]*),\s*([^,]*),\s*0\s*\)', line)
+ if match and not Match(r"^''|-?[0-9]+|0x[0-9A-Fa-f]$", match.group(2)):
+ error(filename, linenum, 'runtime/memset', 4,
+ 'Did you mean "memset(%s, 0, %s)"?'
+ % (match.group(1), match.group(2)))
+
+ if Search(r'\busing namespace\b', line):
+ error(filename, linenum, 'build/namespaces', 5,
+ 'Do not use namespace using-directives. '
+ 'Use using-declarations instead.')
+
+ # Detect variable-length arrays.
+ match = Match(r'\s*(.+::)?(\w+) [a-z]\w*\[(.+)];', line)
+ if (match and match.group(2) != 'return' and match.group(2) != 'delete' and
+ match.group(3).find(']') == -1):
+ # Split the size using space and arithmetic operators as delimiters.
+ # If any of the resulting tokens are not compile time constants then
+ # report the error.
+ tokens = re.split(r'\s|\+|\-|\*|\/|<<|>>]', match.group(3))
+ is_const = True
+ skip_next = False
+ for tok in tokens:
+ if skip_next:
+ skip_next = False
+ continue
+
+ if Search(r'sizeof\(.+\)', tok): continue
+ if Search(r'arraysize\(\w+\)', tok): continue
+
+ tok = tok.lstrip('(')
+ tok = tok.rstrip(')')
+ if not tok: continue
+ if Match(r'\d+', tok): continue
+ if Match(r'0[xX][0-9a-fA-F]+', tok): continue
+ if Match(r'k[A-Z0-9]\w*', tok): continue
+ if Match(r'(.+::)?k[A-Z0-9]\w*', tok): continue
+ if Match(r'(.+::)?[A-Z][A-Z0-9_]*', tok): continue
+ # A catch all for tricky sizeof cases, including 'sizeof expression',
+ # 'sizeof(*type)', 'sizeof(const type)', 'sizeof(struct StructName)'
+ # requires skipping the next token because we split on ' ' and '*'.
+ if tok.startswith('sizeof'):
+ skip_next = True
+ continue
+ is_const = False
+ break
+ if not is_const:
+ error(filename, linenum, 'runtime/arrays', 1,
+ 'Do not use variable-length arrays. Use an appropriately named '
+ "('k' followed by CamelCase) compile-time constant for the size.")
+
+ # If DISALLOW_EVIL_CONSTRUCTORS, DISALLOW_COPY_AND_ASSIGN, or
+ # DISALLOW_IMPLICIT_CONSTRUCTORS is present, then it should be the last thing
+ # in the class declaration.
+ match = Match(
+ (r'\s*'
+ r'(DISALLOW_(EVIL_CONSTRUCTORS|COPY_AND_ASSIGN|IMPLICIT_CONSTRUCTORS))'
+ r'\(.*\);$'),
+ line)
+ if match and linenum + 1 < clean_lines.NumLines():
+ next_line = clean_lines.elided[linenum + 1]
+ # We allow some, but not all, declarations of variables to be present
+ # in the statement that defines the class. The [\w\*,\s]* fragment of
+ # the regular expression below allows users to declare instances of
+ # the class or pointers to instances, but not less common types such
+ # as function pointers or arrays. It's a tradeoff between allowing
+ # reasonable code and avoiding trying to parse more C++ using regexps.
+ if not Search(r'^\s*}[\w\*,\s]*;', next_line):
+ error(filename, linenum, 'readability/constructors', 3,
+ match.group(1) + ' should be the last thing in the class')
+
+ # Check for use of unnamed namespaces in header files. Registration
+ # macros are typically OK, so we allow use of "namespace {" on lines
+ # that end with backslashes.
+ if (file_extension == 'h'
+ and Search(r'\bnamespace\s*{', line)
+ and line[-1] != '\\'):
+ error(filename, linenum, 'build/namespaces', 4,
+ 'Do not use unnamed namespaces in header files. See '
+ 'http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml#Namespaces'
+ ' for more information.')
+
+def CheckForNonConstReference(filename, clean_lines, linenum,
+ nesting_state, error):
+ """Check for non-const references.
+
+ Separate from CheckLanguage since it scans backwards from current
+ line, instead of scanning forward.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ nesting_state: A _NestingState instance which maintains information about
+ the current stack of nested blocks being parsed.
+ error: The function to call with any errors found.
+ """
+ # Do nothing if there is no '&' on current line.
+ line = clean_lines.elided[linenum]
+ if '&' not in line:
+ return
+
+ # Long type names may be broken across multiple lines, usually in one
+ # of these forms:
+ # LongType
+ # ::LongTypeContinued &identifier
+ # LongType::
+ # LongTypeContinued &identifier
+ # LongType<
+ # ...>::LongTypeContinued &identifier
+ #
+ # If we detected a type split across two lines, join the previous
+ # line to current line so that we can match const references
+ # accordingly.
+ #
+ # Note that this only scans back one line, since scanning back
+ # arbitrary number of lines would be expensive. If you have a type
+ # that spans more than 2 lines, please use a typedef.
+ if linenum > 1:
+ previous = None
+ if Match(r'\s*::(?:[\w<>]|::)+\s*&\s*\S', line):
+ # previous_line\n + ::current_line
+ previous = Search(r'\b((?:const\s*)?(?:[\w<>]|::)+[\w<>])\s*$',
+ clean_lines.elided[linenum - 1])
+ elif Match(r'\s*[a-zA-Z_]([\w<>]|::)+\s*&\s*\S', line):
+ # previous_line::\n + current_line
+ previous = Search(r'\b((?:const\s*)?(?:[\w<>]|::)+::)\s*$',
+ clean_lines.elided[linenum - 1])
+ if previous:
+ line = previous.group(1) + line.lstrip()
+ else:
+ # Check for templated parameter that is split across multiple lines
+ endpos = line.rfind('>')
+ if endpos > -1:
+ (_, startline, startpos) = ReverseCloseExpression(
+ clean_lines, linenum, endpos)
+ if startpos > -1 and startline < linenum:
+ # Found the matching < on an earlier line, collect all
+ # pieces up to current line.
+ line = ''
+ for i in xrange(startline, linenum + 1):
+ line += clean_lines.elided[i].strip()
+
+ # Check for non-const references in function parameters. A single '&' may
+ # found in the following places:
+ # inside expression: binary & for bitwise AND
+ # inside expression: unary & for taking the address of something
+ # inside declarators: reference parameter
+ # We will exclude the first two cases by checking that we are not inside a
+ # function body, including one that was just introduced by a trailing '{'.
+ # TODO(unknwon): Doesn't account for preprocessor directives.
+ # TODO(unknown): Doesn't account for 'catch(Exception& e)' [rare].
+ check_params = False
+ if not nesting_state.stack:
+ check_params = True # top level
+ elif (isinstance(nesting_state.stack[-1], _ClassInfo) or
+ isinstance(nesting_state.stack[-1], _NamespaceInfo)):
+ check_params = True # within class or namespace
+ elif Match(r'.*{\s*$', line):
+ if (len(nesting_state.stack) == 1 or
+ isinstance(nesting_state.stack[-2], _ClassInfo) or
+ isinstance(nesting_state.stack[-2], _NamespaceInfo)):
+ check_params = True # just opened global/class/namespace block
+ # We allow non-const references in a few standard places, like functions
+ # called "swap()" or iostream operators like "<<" or ">>". Do not check
+ # those function parameters.
+ #
+ # We also accept & in static_assert, which looks like a function but
+ # it's actually a declaration expression.
+ whitelisted_functions = (r'(?:[sS]wap(?:<\w:+>)?|'
+ r'operator\s*[<>][<>]|'
+ r'static_assert|COMPILE_ASSERT'
+ r')\s*\(')
+ if Search(whitelisted_functions, line):
+ check_params = False
+ elif not Search(r'\S+\([^)]*$', line):
+ # Don't see a whitelisted function on this line. Actually we
+ # didn't see any function name on this line, so this is likely a
+ # multi-line parameter list. Try a bit harder to catch this case.
+ for i in xrange(2):
+ if (linenum > i and
+ Search(whitelisted_functions, clean_lines.elided[linenum - i - 1])):
+ check_params = False
+ break
+
+ if check_params:
+ decls = ReplaceAll(r'{[^}]*}', ' ', line) # exclude function body
+ for parameter in re.findall(_RE_PATTERN_REF_PARAM, decls):
+ if not Match(_RE_PATTERN_CONST_REF_PARAM, parameter):
+ error(filename, linenum, 'runtime/references', 2,
+ 'Is this a non-const reference? '
+ 'If so, make const or use a pointer: ' +
+ ReplaceAll(' *<', '<', parameter))
+
+
+def CheckCStyleCast(filename, linenum, line, raw_line, cast_type, pattern,
+ error):
+ """Checks for a C-style cast by looking for the pattern.
+
+ Args:
+ filename: The name of the current file.
+ linenum: The number of the line to check.
+ line: The line of code to check.
+ raw_line: The raw line of code to check, with comments.
+ cast_type: The string for the C++ cast to recommend. This is either
+ reinterpret_cast, static_cast, or const_cast, depending.
+ pattern: The regular expression used to find C-style casts.
+ error: The function to call with any errors found.
+
+ Returns:
+ True if an error was emitted.
+ False otherwise.
+ """
+ match = Search(pattern, line)
+ if not match:
+ return False
+
+ # Exclude lines with sizeof, since sizeof looks like a cast.
+ sizeof_match = Match(r'.*sizeof\s*$', line[0:match.start(1) - 1])
+ if sizeof_match:
+ return False
+
+ # operator++(int) and operator--(int)
+ if (line[0:match.start(1) - 1].endswith(' operator++') or
+ line[0:match.start(1) - 1].endswith(' operator--')):
+ return False
+
+ # A single unnamed argument for a function tends to look like old
+ # style cast. If we see those, don't issue warnings for deprecated
+ # casts, instead issue warnings for unnamed arguments where
+ # appropriate.
+ #
+ # These are things that we want warnings for, since the style guide
+ # explicitly require all parameters to be named:
+ # Function(int);
+ # Function(int) {
+ # ConstMember(int) const;
+ # ConstMember(int) const {
+ # ExceptionMember(int) throw (...);
+ # ExceptionMember(int) throw (...) {
+ # PureVirtual(int) = 0;
+ #
+ # These are functions of some sort, where the compiler would be fine
+ # if they had named parameters, but people often omit those
+ # identifiers to reduce clutter:
+ # (FunctionPointer)(int);
+ # (FunctionPointer)(int) = value;
+ # Function((function_pointer_arg)(int))
+ # <TemplateArgument(int)>;
+ # <(FunctionPointerTemplateArgument)(int)>;
+ remainder = line[match.end(0):]
+ if Match(r'^\s*(?:;|const\b|throw\b|=|>|\{|\))', remainder):
+ # Looks like an unnamed parameter.
+
+ # Don't warn on any kind of template arguments.
+ if Match(r'^\s*>', remainder):
+ return False
+
+ # Don't warn on assignments to function pointers, but keep warnings for
+ # unnamed parameters to pure virtual functions. Note that this pattern
+ # will also pass on assignments of "0" to function pointers, but the
+ # preferred values for those would be "nullptr" or "NULL".
+ matched_zero = Match(r'^\s=\s*(\S+)\s*;', remainder)
+ if matched_zero and matched_zero.group(1) != '0':
+ return False
+
+ # Don't warn on function pointer declarations. For this we need
+ # to check what came before the "(type)" string.
+ if Match(r'.*\)\s*$', line[0:match.start(0)]):
+ return False
+
+ # Don't warn if the parameter is named with block comments, e.g.:
+ # Function(int /*unused_param*/);
+ if '/*' in raw_line:
+ return False
+
+ # Passed all filters, issue warning here.
+ error(filename, linenum, 'readability/function', 3,
+ 'All parameters should be named in a function')
+ return True
+
+ # At this point, all that should be left is actual casts.
+ error(filename, linenum, 'readability/casting', 4,
+ 'Using C-style cast. Use %s<%s>(...) instead' %
+ (cast_type, match.group(1)))
+
+ return True
+
+
+_HEADERS_CONTAINING_TEMPLATES = (
+ ('<deque>', ('deque',)),
+ ('<functional>', ('unary_function', 'binary_function',
+ 'plus', 'minus', 'multiplies', 'divides', 'modulus',
+ 'negate',
+ 'equal_to', 'not_equal_to', 'greater', 'less',
+ 'greater_equal', 'less_equal',
+ 'logical_and', 'logical_or', 'logical_not',
+ 'unary_negate', 'not1', 'binary_negate', 'not2',
+ 'bind1st', 'bind2nd',
+ 'pointer_to_unary_function',
+ 'pointer_to_binary_function',
+ 'ptr_fun',
+ 'mem_fun_t', 'mem_fun', 'mem_fun1_t', 'mem_fun1_ref_t',
+ 'mem_fun_ref_t',
+ 'const_mem_fun_t', 'const_mem_fun1_t',
+ 'const_mem_fun_ref_t', 'const_mem_fun1_ref_t',
+ 'mem_fun_ref',
+ )),
+ ('<limits>', ('numeric_limits',)),
+ ('<list>', ('list',)),
+ ('<map>', ('map', 'multimap',)),
+ ('<memory>', ('allocator',)),
+ ('<queue>', ('queue', 'priority_queue',)),
+ ('<set>', ('set', 'multiset',)),
+ ('<stack>', ('stack',)),
+ ('<string>', ('char_traits', 'basic_string',)),
+ ('<utility>', ('pair',)),
+ ('<vector>', ('vector',)),
+
+ # gcc extensions.
+ # Note: std::hash is their hash, ::hash is our hash
+ ('<hash_map>', ('hash_map', 'hash_multimap',)),
+ ('<hash_set>', ('hash_set', 'hash_multiset',)),
+ ('<slist>', ('slist',)),
+ )
+
+_RE_PATTERN_STRING = re.compile(r'\bstring\b')
+
+_re_pattern_algorithm_header = []
+for _template in ('copy', 'max', 'min', 'min_element', 'sort', 'swap',
+ 'transform'):
+ # Match max<type>(..., ...), max(..., ...), but not foo->max, foo.max or
+ # type::max().
+ _re_pattern_algorithm_header.append(
+ (re.compile(r'[^>.]\b' + _template + r'(<.*?>)?\([^\)]'),
+ _template,
+ '<algorithm>'))
+
+_re_pattern_templates = []
+for _header, _templates in _HEADERS_CONTAINING_TEMPLATES:
+ for _template in _templates:
+ _re_pattern_templates.append(
+ (re.compile(r'(\<|\b)' + _template + r'\s*\<'),
+ _template + '<>',
+ _header))
+
+
+def FilesBelongToSameModule(filename_cc, filename_h):
+ """Check if these two filenames belong to the same module.
+
+ The concept of a 'module' here is a as follows:
+ foo.h, foo-inl.h, foo.cc, foo_test.cc and foo_unittest.cc belong to the
+ same 'module' if they are in the same directory.
+ some/path/public/xyzzy and some/path/internal/xyzzy are also considered
+ to belong to the same module here.
+
+ If the filename_cc contains a longer path than the filename_h, for example,
+ '/absolute/path/to/base/sysinfo.cc', and this file would include
+ 'base/sysinfo.h', this function also produces the prefix needed to open the
+ header. This is used by the caller of this function to more robustly open the
+ header file. We don't have access to the real include paths in this context,
+ so we need this guesswork here.
+
+ Known bugs: tools/base/bar.cc and base/bar.h belong to the same module
+ according to this implementation. Because of this, this function gives
+ some false positives. This should be sufficiently rare in practice.
+
+ Args:
+ filename_cc: is the path for the .cc file
+ filename_h: is the path for the header path
+
+ Returns:
+ Tuple with a bool and a string:
+ bool: True if filename_cc and filename_h belong to the same module.
+ string: the additional prefix needed to open the header file.
+ """
+
+ if not filename_cc.endswith('.cc'):
+ return (False, '')
+ filename_cc = filename_cc[:-len('.cc')]
+ if filename_cc.endswith('_unittest'):
+ filename_cc = filename_cc[:-len('_unittest')]
+ elif filename_cc.endswith('_test'):
+ filename_cc = filename_cc[:-len('_test')]
+ filename_cc = filename_cc.replace('/public/', '/')
+ filename_cc = filename_cc.replace('/internal/', '/')
+
+ if not filename_h.endswith('.h'):
+ return (False, '')
+ filename_h = filename_h[:-len('.h')]
+ if filename_h.endswith('-inl'):
+ filename_h = filename_h[:-len('-inl')]
+ filename_h = filename_h.replace('/public/', '/')
+ filename_h = filename_h.replace('/internal/', '/')
+
+ files_belong_to_same_module = filename_cc.endswith(filename_h)
+ common_path = ''
+ if files_belong_to_same_module:
+ common_path = filename_cc[:-len(filename_h)]
+ return files_belong_to_same_module, common_path
+
+
+def UpdateIncludeState(filename, include_state, io=codecs):
+ """Fill up the include_state with new includes found from the file.
+
+ Args:
+ filename: the name of the header to read.
+ include_state: an _IncludeState instance in which the headers are inserted.
+ io: The io factory to use to read the file. Provided for testability.
+
+ Returns:
+ True if a header was succesfully added. False otherwise.
+ """
+ headerfile = None
+ try:
+ headerfile = io.open(filename, 'r', 'utf8', 'replace')
+ except IOError:
+ return False
+ linenum = 0
+ for line in headerfile:
+ linenum += 1
+ clean_line = CleanseComments(line)
+ match = _RE_PATTERN_INCLUDE.search(clean_line)
+ if match:
+ include = match.group(2)
+ # The value formatting is cute, but not really used right now.
+ # What matters here is that the key is in include_state.
+ include_state.setdefault(include, '%s:%d' % (filename, linenum))
+ return True
+
+
+def CheckForIncludeWhatYouUse(filename, clean_lines, include_state, error,
+ io=codecs):
+ """Reports for missing stl includes.
+
+ This function will output warnings to make sure you are including the headers
+ necessary for the stl containers and functions that you use. We only give one
+ reason to include a header. For example, if you use both equal_to<> and
+ less<> in a .h file, only one (the latter in the file) of these will be
+ reported as a reason to include the <functional>.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ include_state: An _IncludeState instance.
+ error: The function to call with any errors found.
+ io: The IO factory to use to read the header file. Provided for unittest
+ injection.
+ """
+ required = {} # A map of header name to linenumber and the template entity.
+ # Example of required: { '<functional>': (1219, 'less<>') }
+
+ for linenum in xrange(clean_lines.NumLines()):
+ line = clean_lines.elided[linenum]
+ if not line or line[0] == '#':
+ continue
+
+ # String is special -- it is a non-templatized type in STL.
+ matched = _RE_PATTERN_STRING.search(line)
+ if matched:
+ # Don't warn about strings in non-STL namespaces:
+ # (We check only the first match per line; good enough.)
+ prefix = line[:matched.start()]
+ if prefix.endswith('std::') or not prefix.endswith('::'):
+ required['<string>'] = (linenum, 'string')
+
+ for pattern, template, header in _re_pattern_algorithm_header:
+ if pattern.search(line):
+ required[header] = (linenum, template)
+
+ # The following function is just a speed up, no semantics are changed.
+ if not '<' in line: # Reduces the cpu time usage by skipping lines.
+ continue
+
+ for pattern, template, header in _re_pattern_templates:
+ if pattern.search(line):
+ required[header] = (linenum, template)
+
+ # The policy is that if you #include something in foo.h you don't need to
+ # include it again in foo.cc. Here, we will look at possible includes.
+ # Let's copy the include_state so it is only messed up within this function.
+ include_state = include_state.copy()
+
+ # Did we find the header for this file (if any) and succesfully load it?
+ header_found = False
+
+ # Use the absolute path so that matching works properly.
+ abs_filename = FileInfo(filename).FullName()
+
+ # For Emacs's flymake.
+ # If cpplint is invoked from Emacs's flymake, a temporary file is generated
+ # by flymake and that file name might end with '_flymake.cc'. In that case,
+ # restore original file name here so that the corresponding header file can be
+ # found.
+ # e.g. If the file name is 'foo_flymake.cc', we should search for 'foo.h'
+ # instead of 'foo_flymake.h'
+ abs_filename = re.sub(r'_flymake\.cc$', '.cc', abs_filename)
+
+ # include_state is modified during iteration, so we iterate over a copy of
+ # the keys.
+ header_keys = include_state.keys()
+ for header in header_keys:
+ (same_module, common_path) = FilesBelongToSameModule(abs_filename, header)
+ fullpath = common_path + header
+ if same_module and UpdateIncludeState(fullpath, include_state, io):
+ header_found = True
+
+ # If we can't find the header file for a .cc, assume it's because we don't
+ # know where to look. In that case we'll give up as we're not sure they
+ # didn't include it in the .h file.
+ # TODO(unknown): Do a better job of finding .h files so we are confident that
+ # not having the .h file means there isn't one.
+ if filename.endswith('.cc') and not header_found:
+ return
+
+ # All the lines have been processed, report the errors found.
+ for required_header_unstripped in required:
+ template = required[required_header_unstripped][1]
+ if required_header_unstripped.strip('<>"') not in include_state:
+ error(filename, required[required_header_unstripped][0],
+ 'build/include_what_you_use', 4,
+ 'Add #include ' + required_header_unstripped + ' for ' + template)
+
+
+_RE_PATTERN_EXPLICIT_MAKEPAIR = re.compile(r'\bmake_pair\s*<')
+
+
+def CheckMakePairUsesDeduction(filename, clean_lines, linenum, error):
+ """Check that make_pair's template arguments are deduced.
+
+ G++ 4.6 in C++0x mode fails badly if make_pair's template arguments are
+ specified explicitly, and such use isn't intended in any case.
+
+ Args:
+ filename: The name of the current file.
+ clean_lines: A CleansedLines instance containing the file.
+ linenum: The number of the line to check.
+ error: The function to call with any errors found.
+ """
+ line = clean_lines.elided[linenum]
+ match = _RE_PATTERN_EXPLICIT_MAKEPAIR.search(line)
+ if match:
+ error(filename, linenum, 'build/explicit_make_pair',
+ 4, # 4 = high confidence
+ 'For C++11-compatibility, omit template arguments from make_pair'
+ ' OR use pair directly OR if appropriate, construct a pair directly')
+
+
+def ProcessLine(filename, file_extension, clean_lines, line,
+ include_state, function_state, nesting_state, error,
+ extra_check_functions=[]):
+ """Processes a single line in the file.
+
+ Args:
+ filename: Filename of the file that is being processed.
+ file_extension: The extension (dot not included) of the file.
+ clean_lines: An array of strings, each representing a line of the file,
+ with comments stripped.
+ line: Number of line being processed.
+ include_state: An _IncludeState instance in which the headers are inserted.
+ function_state: A _FunctionState instance which counts function lines, etc.
+ nesting_state: A _NestingState instance which maintains information about
+ the current stack of nested blocks being parsed.
+ error: A callable to which errors are reported, which takes 4 arguments:
+ filename, line number, error level, and message
+ extra_check_functions: An array of additional check functions that will be
+ run on each source line. Each function takes 4
+ arguments: filename, clean_lines, line, error
+ """
+ raw_lines = clean_lines.raw_lines
+ ParseNolintSuppressions(filename, raw_lines[line], line, error)
+ nesting_state.Update(filename, clean_lines, line, error)
+ if nesting_state.stack and nesting_state.stack[-1].inline_asm != _NO_ASM:
+ return
+ CheckForFunctionLengths(filename, clean_lines, line, function_state, error)
+ CheckForMultilineCommentsAndStrings(filename, clean_lines, line, error)
+ CheckStyle(filename, clean_lines, line, file_extension, nesting_state, error)
+ CheckLanguage(filename, clean_lines, line, file_extension, include_state,
+ nesting_state, error)
+ CheckForNonConstReference(filename, clean_lines, line, nesting_state, error)
+ CheckForNonStandardConstructs(filename, clean_lines, line,
+ nesting_state, error)
+ CheckVlogArguments(filename, clean_lines, line, error)
+ CheckPosixThreading(filename, clean_lines, line, error)
+ CheckInvalidIncrement(filename, clean_lines, line, error)
+ CheckMakePairUsesDeduction(filename, clean_lines, line, error)
+ for check_fn in extra_check_functions:
+ check_fn(filename, clean_lines, line, error)
+
+def ProcessFileData(filename, file_extension, lines, error,
+ extra_check_functions=[]):
+ """Performs lint checks and reports any errors to the given error function.
+
+ Args:
+ filename: Filename of the file that is being processed.
+ file_extension: The extension (dot not included) of the file.
+ lines: An array of strings, each representing a line of the file, with the
+ last element being empty if the file is terminated with a newline.
+ error: A callable to which errors are reported, which takes 4 arguments:
+ filename, line number, error level, and message
+ extra_check_functions: An array of additional check functions that will be
+ run on each source line. Each function takes 4
+ arguments: filename, clean_lines, line, error
+ """
+ lines = (['// marker so line numbers and indices both start at 1'] + lines +
+ ['// marker so line numbers end in a known way'])
+
+ include_state = _IncludeState()
+ function_state = _FunctionState()
+ nesting_state = _NestingState()
+
+ ResetNolintSuppressions()
+
+ CheckForCopyright(filename, lines, error)
+
+ if file_extension == 'h':
+ CheckForHeaderGuard(filename, lines, error)
+
+ RemoveMultiLineComments(filename, lines, error)
+ clean_lines = CleansedLines(lines)
+ for line in xrange(clean_lines.NumLines()):
+ ProcessLine(filename, file_extension, clean_lines, line,
+ include_state, function_state, nesting_state, error,
+ extra_check_functions)
+ nesting_state.CheckCompletedBlocks(filename, error)
+
+ CheckForIncludeWhatYouUse(filename, clean_lines, include_state, error)
+
+ # We check here rather than inside ProcessLine so that we see raw
+ # lines rather than "cleaned" lines.
+ CheckForBadCharacters(filename, lines, error)
+
+ CheckForNewlineAtEOF(filename, lines, error)
+
+def ProcessFile(filename, vlevel, extra_check_functions=[]):
+ """Does google-lint on a single file.
+
+ Args:
+ filename: The name of the file to parse.
+
+ vlevel: The level of errors to report. Every error of confidence
+ >= verbose_level will be reported. 0 is a good default.
+
+ extra_check_functions: An array of additional check functions that will be
+ run on each source line. Each function takes 4
+ arguments: filename, clean_lines, line, error
+ """
+
+ _SetVerboseLevel(vlevel)
+
+ try:
+ # Support the UNIX convention of using "-" for stdin. Note that
+ # we are not opening the file with universal newline support
+ # (which codecs doesn't support anyway), so the resulting lines do
+ # contain trailing '\r' characters if we are reading a file that
+ # has CRLF endings.
+ # If after the split a trailing '\r' is present, it is removed
+ # below. If it is not expected to be present (i.e. os.linesep !=
+ # '\r\n' as in Windows), a warning is issued below if this file
+ # is processed.
+
+ if filename == '-':
+ lines = codecs.StreamReaderWriter(sys.stdin,
+ codecs.getreader('utf8'),
+ codecs.getwriter('utf8'),
+ 'replace').read().split('\n')
+ else:
+ lines = codecs.open(filename, 'r', 'utf8', 'replace').read().split('\n')
+
+ carriage_return_found = False
+ # Remove trailing '\r'.
+ for linenum in range(len(lines)):
+ if lines[linenum].endswith('\r'):
+ lines[linenum] = lines[linenum].rstrip('\r')
+ carriage_return_found = True
+
+ except IOError:
+ sys.stderr.write(
+ "Skipping input '%s': Can't open for reading\n" % filename)
+ return
+
+ # Note, if no dot is found, this will give the entire filename as the ext.
+ file_extension = filename[filename.rfind('.') + 1:]
+
+ # When reading from stdin, the extension is unknown, so no cpplint tests
+ # should rely on the extension.
+ if filename != '-' and file_extension not in _valid_extensions:
+ sys.stderr.write('Ignoring %s; not a valid file name '
+ '(%s)\n' % (filename, ', '.join(_valid_extensions)))
+ else:
+ ProcessFileData(filename, file_extension, lines, Error,
+ extra_check_functions)
+ if carriage_return_found and os.linesep != '\r\n':
+ # Use 0 for linenum since outputting only one error for potentially
+ # several lines.
+ Error(filename, 0, 'whitespace/newline', 1,
+ 'One or more unexpected \\r (^M) found;'
+ 'better to use only a \\n')
+
+ sys.stderr.write('Done processing %s\n' % filename)
+
+
+def PrintUsage(message):
+ """Prints a brief usage string and exits, optionally with an error message.
+
+ Args:
+ message: The optional error message.
+ """
+ sys.stderr.write(_USAGE)
+ if message:
+ sys.exit('\nFATAL ERROR: ' + message)
+ else:
+ sys.exit(1)
+
+
+def PrintCategories():
+ """Prints a list of all the error-categories used by error messages.
+
+ These are the categories used to filter messages via --filter.
+ """
+ sys.stderr.write(''.join(' %s\n' % cat for cat in _ERROR_CATEGORIES))
+ sys.exit(0)
+
+
+def ParseArguments(args):
+ """Parses the command line arguments.
+
+ This may set the output format and verbosity level as side-effects.
+
+ Args:
+ args: The command line arguments:
+
+ Returns:
+ The list of filenames to lint.
+ """
+ try:
+ (opts, filenames) = getopt.getopt(args, '', ['help', 'output=', 'verbose=',
+ 'counting=',
+ 'filter=',
+ 'root=',
+ 'linelength=',
+ 'extensions='])
+ except getopt.GetoptError:
+ PrintUsage('Invalid arguments.')
+
+ verbosity = _VerboseLevel()
+ output_format = _OutputFormat()
+ filters = ''
+ counting_style = ''
+
+ for (opt, val) in opts:
+ if opt == '--help':
+ PrintUsage(None)
+ elif opt == '--output':
+ if val not in ('emacs', 'vs7', 'eclipse'):
+ PrintUsage('The only allowed output formats are emacs, vs7 and eclipse.')
+ output_format = val
+ elif opt == '--verbose':
+ verbosity = int(val)
+ elif opt == '--filter':
+ filters = val
+ if not filters:
+ PrintCategories()
+ elif opt == '--counting':
+ if val not in ('total', 'toplevel', 'detailed'):
+ PrintUsage('Valid counting options are total, toplevel, and detailed')
+ counting_style = val
+ elif opt == '--root':
+ global _root
+ _root = val
+ elif opt == '--linelength':
+ global _line_length
+ try:
+ _line_length = int(val)
+ except ValueError:
+ PrintUsage('Line length must be digits.')
+ elif opt == '--extensions':
+ global _valid_extensions
+ try:
+ _valid_extensions = set(val.split(','))
+ except ValueError:
+ PrintUsage('Extensions must be comma seperated list.')
+
+ if not filenames:
+ PrintUsage('No files were specified.')
+
+ _SetOutputFormat(output_format)
+ _SetVerboseLevel(verbosity)
+ _SetFilters(filters)
+ _SetCountingStyle(counting_style)
+
+ return filenames
+
+
+def main():
+ filenames = ParseArguments(sys.argv[1:])
+
+ # Change stderr to write with replacement characters so we don't die
+ # if we try to print something containing non-ASCII characters.
+ sys.stderr = codecs.StreamReaderWriter(sys.stderr,
+ codecs.getreader('utf8'),
+ codecs.getwriter('utf8'),
+ 'replace')
+
+ _cpplint_state.ResetErrorCounts()
+ for filename in filenames:
+ ProcessFile(filename, _cpplint_state.verbose_level)
+ _cpplint_state.PrintErrorCounts()
+
+ sys.exit(_cpplint_state.error_count > 0)
+
+
+if __name__ == '__main__':
+ main()