mtd: nand: Add an option to maximize the ECC strength

The generic NAND DT bindings allows one to tweak the ECC strength and
step size to their need. It can be used to lower the ECC strength to
match a bootloader/firmware config, but might also be used to get a better
reliability.

In the latter case, the user might want to use the maximum ECC strength
without having to explicitly calculate the exact value (this value not
only depends on the OOB size, but also on the NAND controller, and can
be tricky to extract).

Add a generic 'nand-ecc-maximize' DT property and the associated
NAND_ECC_MAXIMIZE flag, to let ECC controller drivers select the best
ECC strength and step-size on their own.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt
index 3733300..b056016 100644 (file)
--- a/Documentation/devicetree/bindings/mtd/nand.txt
+++ b/Documentation/devicetree/bindings/mtd/nand.txt
@@ -35,6 +35,15 @@ Optional NAND chip properties:
 - nand-ecc-step-size: integer representing the number of data bytes
                      that are covered by a single ECC step.
 
+- nand-ecc-maximize: boolean used to specify that you want to maximize ECC
+                    strength. The maximum ECC strength is both controller and
+                    chip dependent. The controller side has to select the ECC
+                    config providing the best strength and taking the OOB area
+                    size constraint into account.
+                    This is particularly useful when only the in-band area is
+                    used by the upper layers, and you want to make your NAND
+                    as reliable as possible.
+
 The ECC strength and ECC step size properties define the correction capability
 of a controller. Together, they say a controller can correct "{strength} bit
 errors per {size} bytes".

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index f39775b..6669dfc 100644 (file)
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -4272,6 +4272,9 @@ static int nand_dt_init(struct nand_chip *chip)
        if (ecc_step > 0)
                chip->ecc.size = ecc_step;
 
+       if (of_property_read_bool(dn, "nand-ecc-maximize"))
+               chip->ecc.options |= NAND_ECC_MAXIMIZE;
+
        return 0;
 }
 

diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index d3e3f8d..331caf9 100644 (file)
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -141,6 +141,7 @@ enum nand_ecc_algo {
  * pages and you want to rely on the default implementation.
  */
 #define NAND_ECC_GENERIC_ERASED_CHECK  BIT(0)
+#define NAND_ECC_MAXIMIZE              BIT(1)
 
 /* Bit mask for flags passed to do_nand_read_ecc */
 #define NAND_GET_DEVICE                0x80