tty: move the async flags from the serial code into the tty includes

These are used with the tty_port flags which are tty generic so move the
flags into a more sensible place. This then makes it possible to add
helpers such as those suggested by Huang Shijie.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index e9f560a..c57e064 100644 (file)
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -369,6 +369,7 @@ header-y += tipc.h
 header-y += tipc_config.h
 header-y += toshiba.h
 header-y += tty.h
+header-y += tty_flags.h
 header-y += types.h
 header-y += udf_fs_i.h
 header-y += udp.h

diff --git a/include/linux/serial.h b/include/linux/serial.h
index 90e9f98..3504f42 100644 (file)
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -12,9 +12,12 @@
 
 #include <linux/types.h>
 
+#include <linux/tty_flags.h>
+
 #ifdef __KERNEL__
 #include <asm/page.h>
 
+
 /*
  * Counters of the input lines (CTS, DSR, RI, CD) interrupts
  */
@@ -94,78 +97,6 @@ struct serial_uart_config {
 #define UART_STARTECH          0x04
 #define UART_NATSEMI           0x08
 
-/*
- * Definitions for async_struct (and serial_struct) flags field
- *
- * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
- */
-#define ASYNCB_HUP_NOTIFY       0 /* Notify getty on hangups and closes
-                                   * on the callout port */
-#define ASYNCB_FOURPORT                 1 /* Set OU1, OUT2 per AST Fourport settings */
-#define ASYNCB_SAK              2 /* Secure Attention Key (Orange book) */
-#define ASYNCB_SPLIT_TERMIOS    3 /* Separate termios for dialin/callout */
-#define ASYNCB_SPD_HI           4 /* Use 56000 instead of 38400 bps */
-#define ASYNCB_SPD_VHI          5 /* Use 115200 instead of 38400 bps */
-#define ASYNCB_SKIP_TEST        6 /* Skip UART test during autoconfiguration */
-#define ASYNCB_AUTO_IRQ                 7 /* Do automatic IRQ during
-                                   * autoconfiguration */
-#define ASYNCB_SESSION_LOCKOUT  8 /* Lock out cua opens based on session */
-#define ASYNCB_PGRP_LOCKOUT     9 /* Lock out cua opens based on pgrp */
-#define ASYNCB_CALLOUT_NOHUP   10 /* Don't do hangups for cua device */
-#define ASYNCB_HARDPPS_CD      11 /* Call hardpps when CD goes high  */
-#define ASYNCB_SPD_SHI         12 /* Use 230400 instead of 38400 bps */
-#define ASYNCB_LOW_LATENCY     13 /* Request low latency behaviour */
-#define ASYNCB_BUGGY_UART      14 /* This is a buggy UART, skip some safety
-                                   * checks.  Note: can be dangerous! */
-#define ASYNCB_AUTOPROBE       15 /* Port was autoprobed by PCI or PNP code */
-#define ASYNCB_LAST_USER       15
-
-/* Internal flags used only by kernel */
-#define ASYNCB_INITIALIZED     31 /* Serial port was initialized */
-#define ASYNCB_SUSPENDED       30 /* Serial port is suspended */
-#define ASYNCB_NORMAL_ACTIVE   29 /* Normal device is active */
-#define ASYNCB_BOOT_AUTOCONF   28 /* Autoconfigure port on bootup */
-#define ASYNCB_CLOSING         27 /* Serial port is closing */
-#define ASYNCB_CTS_FLOW                26 /* Do CTS flow control */
-#define ASYNCB_CHECK_CD                25 /* i.e., CLOCAL */
-#define ASYNCB_SHARE_IRQ       24 /* for multifunction cards, no longer used */
-#define ASYNCB_CONS_FLOW       23 /* flow control for console  */
-#define ASYNCB_FIRST_KERNEL    22
-
-#define ASYNC_HUP_NOTIFY       (1U << ASYNCB_HUP_NOTIFY)
-#define ASYNC_SUSPENDED                (1U << ASYNCB_SUSPENDED)
-#define ASYNC_FOURPORT         (1U << ASYNCB_FOURPORT)
-#define ASYNC_SAK              (1U << ASYNCB_SAK)
-#define ASYNC_SPLIT_TERMIOS    (1U << ASYNCB_SPLIT_TERMIOS)
-#define ASYNC_SPD_HI           (1U << ASYNCB_SPD_HI)
-#define ASYNC_SPD_VHI          (1U << ASYNCB_SPD_VHI)
-#define ASYNC_SKIP_TEST                (1U << ASYNCB_SKIP_TEST)
-#define ASYNC_AUTO_IRQ         (1U << ASYNCB_AUTO_IRQ)
-#define ASYNC_SESSION_LOCKOUT  (1U << ASYNCB_SESSION_LOCKOUT)
-#define ASYNC_PGRP_LOCKOUT     (1U << ASYNCB_PGRP_LOCKOUT)
-#define ASYNC_CALLOUT_NOHUP    (1U << ASYNCB_CALLOUT_NOHUP)
-#define ASYNC_HARDPPS_CD       (1U << ASYNCB_HARDPPS_CD)
-#define ASYNC_SPD_SHI          (1U << ASYNCB_SPD_SHI)
-#define ASYNC_LOW_LATENCY      (1U << ASYNCB_LOW_LATENCY)
-#define ASYNC_BUGGY_UART       (1U << ASYNCB_BUGGY_UART)
-#define ASYNC_AUTOPROBE                (1U << ASYNCB_AUTOPROBE)
-
-#define ASYNC_FLAGS            ((1U << (ASYNCB_LAST_USER + 1)) - 1)
-#define ASYNC_USR_MASK         (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
-               ASYNC_LOW_LATENCY)
-#define ASYNC_SPD_CUST         (ASYNC_SPD_HI|ASYNC_SPD_VHI)
-#define ASYNC_SPD_WARP         (ASYNC_SPD_HI|ASYNC_SPD_SHI)
-#define ASYNC_SPD_MASK         (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
-
-#define ASYNC_INITIALIZED      (1U << ASYNCB_INITIALIZED)
-#define ASYNC_NORMAL_ACTIVE    (1U << ASYNCB_NORMAL_ACTIVE)
-#define ASYNC_BOOT_AUTOCONF    (1U << ASYNCB_BOOT_AUTOCONF)
-#define ASYNC_CLOSING          (1U << ASYNCB_CLOSING)
-#define ASYNC_CTS_FLOW         (1U << ASYNCB_CTS_FLOW)
-#define ASYNC_CHECK_CD         (1U << ASYNCB_CHECK_CD)
-#define ASYNC_SHARE_IRQ                (1U << ASYNCB_SHARE_IRQ)
-#define ASYNC_CONS_FLOW                (1U << ASYNCB_CONS_FLOW)
-#define ASYNC_INTERNAL_FLAGS   (~((1U << ASYNCB_FIRST_KERNEL) - 1))
 
 /*
  * Multiport serial configuration structure --- external structure

diff --git a/include/linux/tty.h b/include/linux/tty.h
index 69a787f..dbebd1e 100644 (file)
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -43,6 +43,7 @@
 #include <linux/tty_driver.h>
 #include <linux/tty_ldisc.h>
 #include <linux/mutex.h>
+#include <linux/tty_flags.h>
 
 
 

diff --git a/include/linux/tty_flags.h b/include/linux/tty_flags.h
new file mode 100644 (file)
index 0000000..eefcb48
--- /dev/null
+++ b/include/linux/tty_flags.h
@@ -0,0 +1,78 @@
+#ifndef _LINUX_TTY_FLAGS_H
+#define _LINUX_TTY_FLAGS_H
+
+/*
+ * Definitions for async_struct (and serial_struct) flags field also
+ * shared by the tty_port flags structures.
+ *
+ * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
+ */
+#define ASYNCB_HUP_NOTIFY       0 /* Notify getty on hangups and closes
+                                   * on the callout port */
+#define ASYNCB_FOURPORT                 1 /* Set OU1, OUT2 per AST Fourport settings */
+#define ASYNCB_SAK              2 /* Secure Attention Key (Orange book) */
+#define ASYNCB_SPLIT_TERMIOS    3 /* Separate termios for dialin/callout */
+#define ASYNCB_SPD_HI           4 /* Use 56000 instead of 38400 bps */
+#define ASYNCB_SPD_VHI          5 /* Use 115200 instead of 38400 bps */
+#define ASYNCB_SKIP_TEST        6 /* Skip UART test during autoconfiguration */
+#define ASYNCB_AUTO_IRQ                 7 /* Do automatic IRQ during
+                                   * autoconfiguration */
+#define ASYNCB_SESSION_LOCKOUT  8 /* Lock out cua opens based on session */
+#define ASYNCB_PGRP_LOCKOUT     9 /* Lock out cua opens based on pgrp */
+#define ASYNCB_CALLOUT_NOHUP   10 /* Don't do hangups for cua device */
+#define ASYNCB_HARDPPS_CD      11 /* Call hardpps when CD goes high  */
+#define ASYNCB_SPD_SHI         12 /* Use 230400 instead of 38400 bps */
+#define ASYNCB_LOW_LATENCY     13 /* Request low latency behaviour */
+#define ASYNCB_BUGGY_UART      14 /* This is a buggy UART, skip some safety
+                                   * checks.  Note: can be dangerous! */
+#define ASYNCB_AUTOPROBE       15 /* Port was autoprobed by PCI or PNP code */
+#define ASYNCB_LAST_USER       15
+
+/* Internal flags used only by kernel */
+#define ASYNCB_INITIALIZED     31 /* Serial port was initialized */
+#define ASYNCB_SUSPENDED       30 /* Serial port is suspended */
+#define ASYNCB_NORMAL_ACTIVE   29 /* Normal device is active */
+#define ASYNCB_BOOT_AUTOCONF   28 /* Autoconfigure port on bootup */
+#define ASYNCB_CLOSING         27 /* Serial port is closing */
+#define ASYNCB_CTS_FLOW                26 /* Do CTS flow control */
+#define ASYNCB_CHECK_CD                25 /* i.e., CLOCAL */
+#define ASYNCB_SHARE_IRQ       24 /* for multifunction cards, no longer used */
+#define ASYNCB_CONS_FLOW       23 /* flow control for console  */
+#define ASYNCB_FIRST_KERNEL    22
+
+#define ASYNC_HUP_NOTIFY       (1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_SUSPENDED                (1U << ASYNCB_SUSPENDED)
+#define ASYNC_FOURPORT         (1U << ASYNCB_FOURPORT)
+#define ASYNC_SAK              (1U << ASYNCB_SAK)
+#define ASYNC_SPLIT_TERMIOS    (1U << ASYNCB_SPLIT_TERMIOS)
+#define ASYNC_SPD_HI           (1U << ASYNCB_SPD_HI)
+#define ASYNC_SPD_VHI          (1U << ASYNCB_SPD_VHI)
+#define ASYNC_SKIP_TEST                (1U << ASYNCB_SKIP_TEST)
+#define ASYNC_AUTO_IRQ         (1U << ASYNCB_AUTO_IRQ)
+#define ASYNC_SESSION_LOCKOUT  (1U << ASYNCB_SESSION_LOCKOUT)
+#define ASYNC_PGRP_LOCKOUT     (1U << ASYNCB_PGRP_LOCKOUT)
+#define ASYNC_CALLOUT_NOHUP    (1U << ASYNCB_CALLOUT_NOHUP)
+#define ASYNC_HARDPPS_CD       (1U << ASYNCB_HARDPPS_CD)
+#define ASYNC_SPD_SHI          (1U << ASYNCB_SPD_SHI)
+#define ASYNC_LOW_LATENCY      (1U << ASYNCB_LOW_LATENCY)
+#define ASYNC_BUGGY_UART       (1U << ASYNCB_BUGGY_UART)
+#define ASYNC_AUTOPROBE                (1U << ASYNCB_AUTOPROBE)
+
+#define ASYNC_FLAGS            ((1U << (ASYNCB_LAST_USER + 1)) - 1)
+#define ASYNC_USR_MASK         (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
+               ASYNC_LOW_LATENCY)
+#define ASYNC_SPD_CUST         (ASYNC_SPD_HI|ASYNC_SPD_VHI)
+#define ASYNC_SPD_WARP         (ASYNC_SPD_HI|ASYNC_SPD_SHI)
+#define ASYNC_SPD_MASK         (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
+
+#define ASYNC_INITIALIZED      (1U << ASYNCB_INITIALIZED)
+#define ASYNC_NORMAL_ACTIVE    (1U << ASYNCB_NORMAL_ACTIVE)
+#define ASYNC_BOOT_AUTOCONF    (1U << ASYNCB_BOOT_AUTOCONF)
+#define ASYNC_CLOSING          (1U << ASYNCB_CLOSING)
+#define ASYNC_CTS_FLOW         (1U << ASYNCB_CTS_FLOW)
+#define ASYNC_CHECK_CD         (1U << ASYNCB_CHECK_CD)
+#define ASYNC_SHARE_IRQ                (1U << ASYNCB_SHARE_IRQ)
+#define ASYNC_CONS_FLOW                (1U << ASYNCB_CONS_FLOW)
+#define ASYNC_INTERNAL_FLAGS   (~((1U << ASYNCB_FIRST_KERNEL) - 1))
+
+#endif