sched: Remove PREEMPT_NEED_RESCHED from generic code
authorPeter Zijlstra <peterz@infradead.org>
Thu, 28 Nov 2013 13:26:41 +0000 (14:26 +0100)
committerIngo Molnar <mingo@kernel.org>
Wed, 11 Dec 2013 14:52:32 +0000 (15:52 +0100)
While hunting a preemption issue with Alexander, Ben noticed that the
currently generic PREEMPT_NEED_RESCHED stuff is horribly broken for
load-store architectures.

We currently rely on the IPI to fold TIF_NEED_RESCHED into
PREEMPT_NEED_RESCHED, but when this IPI lands while we already have
a load for the preempt-count but before the store, the store will erase
the PREEMPT_NEED_RESCHED change.

The current preempt-count only works on load-store archs because
interrupts are assumed to be completely balanced wrt their preempt_count
fiddling; the previous preempt_count load will match the preempt_count
state after the interrupt and therefore nothing gets lost.

This patch removes the PREEMPT_NEED_RESCHED usage from generic code and
pushes it into x86 arch code; the generic code goes back to relying on
TIF_NEED_RESCHED.

Boot tested on x86_64 and compile tested on ppc64.

Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reported-and-Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20131128132641.GP10022@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
arch/x86/include/asm/preempt.h
include/asm-generic/preempt.h
include/linux/sched.h

index 8729723..c8b0519 100644 (file)
@@ -8,6 +8,12 @@
 DECLARE_PER_CPU(int, __preempt_count);
 
 /*
+ * We use the PREEMPT_NEED_RESCHED bit as an inverted NEED_RESCHED such
+ * that a decrement hitting 0 means we can and should reschedule.
+ */
+#define PREEMPT_ENABLED        (0 + PREEMPT_NEED_RESCHED)
+
+/*
  * We mask the PREEMPT_NEED_RESCHED bit so as not to confuse all current users
  * that think a non-zero value indicates we cannot preempt.
  */
@@ -74,6 +80,11 @@ static __always_inline void __preempt_count_sub(int val)
        __this_cpu_add_4(__preempt_count, -val);
 }
 
+/*
+ * Because we keep PREEMPT_NEED_RESCHED set when we do _not_ need to reschedule
+ * a decrement which hits zero means we have no preempt_count and should
+ * reschedule.
+ */
 static __always_inline bool __preempt_count_dec_and_test(void)
 {
        GEN_UNARY_RMWcc("decl", __preempt_count, __percpu_arg(0), "e");
index ddf2b42..1cd3f5d 100644 (file)
@@ -3,13 +3,11 @@
 
 #include <linux/thread_info.h>
 
-/*
- * We mask the PREEMPT_NEED_RESCHED bit so as not to confuse all current users
- * that think a non-zero value indicates we cannot preempt.
- */
+#define PREEMPT_ENABLED        (0)
+
 static __always_inline int preempt_count(void)
 {
-       return current_thread_info()->preempt_count & ~PREEMPT_NEED_RESCHED;
+       return current_thread_info()->preempt_count;
 }
 
 static __always_inline int *preempt_count_ptr(void)
@@ -17,11 +15,6 @@ static __always_inline int *preempt_count_ptr(void)
        return &current_thread_info()->preempt_count;
 }
 
-/*
- * We now loose PREEMPT_NEED_RESCHED and cause an extra reschedule; however the
- * alternative is loosing a reschedule. Better schedule too often -- also this
- * should be a very rare operation.
- */
 static __always_inline void preempt_count_set(int pc)
 {
        *preempt_count_ptr() = pc;
@@ -41,28 +34,17 @@ static __always_inline void preempt_count_set(int pc)
        task_thread_info(p)->preempt_count = PREEMPT_ENABLED; \
 } while (0)
 
-/*
- * We fold the NEED_RESCHED bit into the preempt count such that
- * preempt_enable() can decrement and test for needing to reschedule with a
- * single instruction.
- *
- * We invert the actual bit, so that when the decrement hits 0 we know we both
- * need to resched (the bit is cleared) and can resched (no preempt count).
- */
-
 static __always_inline void set_preempt_need_resched(void)
 {
-       *preempt_count_ptr() &= ~PREEMPT_NEED_RESCHED;
 }
 
 static __always_inline void clear_preempt_need_resched(void)
 {
-       *preempt_count_ptr() |= PREEMPT_NEED_RESCHED;
 }
 
 static __always_inline bool test_preempt_need_resched(void)
 {
-       return !(*preempt_count_ptr() & PREEMPT_NEED_RESCHED);
+       return false;
 }
 
 /*
@@ -81,7 +63,12 @@ static __always_inline void __preempt_count_sub(int val)
 
 static __always_inline bool __preempt_count_dec_and_test(void)
 {
-       return !--*preempt_count_ptr();
+       /*
+        * Because of load-store architectures cannot do per-cpu atomic
+        * operations; we cannot use PREEMPT_NEED_RESCHED because it might get
+        * lost.
+        */
+       return !--*preempt_count_ptr() && tif_need_resched();
 }
 
 /*
@@ -89,7 +76,7 @@ static __always_inline bool __preempt_count_dec_and_test(void)
  */
 static __always_inline bool should_resched(void)
 {
-       return unlikely(!*preempt_count_ptr());
+       return unlikely(!preempt_count() && tif_need_resched());
 }
 
 #ifdef CONFIG_PREEMPT
index 768b037..96d674b 100644 (file)
@@ -440,8 +440,6 @@ struct task_cputime {
                .sum_exec_runtime = 0,                          \
        }
 
-#define PREEMPT_ENABLED                (PREEMPT_NEED_RESCHED)
-
 #ifdef CONFIG_PREEMPT_COUNT
 #define PREEMPT_DISABLED       (1 + PREEMPT_ENABLED)
 #else