x86/acpi: remove irq-compression trick on 32-bit

We already have a per cpu vector on 32-bit via recent changes, and
don't need this trick any more (which trick obfuscates the real GSI
mappings and which only triggers on larger systems to begin with):

On 3 ioapic system (24 per ioapic) before patch I got:

ACPI: PCI Interrupt Link [ILSB] enabled at IRQ 71
IOAPIC[2]: Set routing entry (10-23 -> 0xa9 -> IRQ 64 Mode:1 Active:1)
pci 0000:80:01.1: PCI INT A -> Link[ILSB] -> GSI 71 (level, low) -> IRQ 64
ACPI: PCI Interrupt Link [LE5B] enabled at IRQ 67
IOAPIC[2]: Set routing entry (10-19 -> 0xb1 -> IRQ 65 Mode:1 Active:1)
pci 0000:83:00.0: PCI INT B -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65
ACPI: PCI Interrupt Link [LE5A] enabled at IRQ 66
IOAPIC[2]: Set routing entry (10-18 -> 0xb9 -> IRQ 66 Mode:1 Active:1)
pci 0000:83:00.1: PCI INT A -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
ACPI: PCI Interrupt Link [LE5D] enabled at IRQ 65
IOAPIC[2]: Set routing entry (10-17 -> 0xc1 -> IRQ 67 Mode:1 Active:1)
pci 0000:84:00.0: PCI INT B -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67
ACPI: PCI Interrupt Link [LE5C] enabled at IRQ 64
IOAPIC[2]: Set routing entry (10-16 -> 0xc9 -> IRQ 68 Mode:1 Active:1)
pci 0000:84:00.1: PCI INT A -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68
pci 0000:87:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:87:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67
pci 0000:88:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68
pci 0000:88:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65
pci 0000:8b:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:8b:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67
pci 0000:8c:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68
pci 0000:8c:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65

after the patch we get:

ACPI: PCI Interrupt Link [ILSB] enabled at IRQ 71
IOAPIC[2]: Set routing entry (10-23 -> 0xa9 -> IRQ 71 Mode:1 Active:1)
pci 0000:80:01.1: PCI INT A -> Link[ILSB] -> GSI 71 (level, low) -> IRQ 71
ACPI: PCI Interrupt Link [LE5B] enabled at IRQ 67
IOAPIC[2]: Set routing entry (10-19 -> 0xb1 -> IRQ 67 Mode:1 Active:1)
pci 0000:83:00.0: PCI INT B -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67
ACPI: PCI Interrupt Link [LE5A] enabled at IRQ 66
IOAPIC[2]: Set routing entry (10-18 -> 0xb9 -> IRQ 66 Mode:1 Active:1)
pci 0000:83:00.1: PCI INT A -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
ACPI: PCI Interrupt Link [LE5D] enabled at IRQ 65
IOAPIC[2]: Set routing entry (10-17 -> 0xc1 -> IRQ 65 Mode:1 Active:1)
pci 0000:84:00.0: PCI INT B -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65
ACPI: PCI Interrupt Link [LE5C] enabled at IRQ 64
IOAPIC[2]: Set routing entry (10-16 -> 0xc9 -> IRQ 64 Mode:1 Active:1)
pci 0000:84:00.1: PCI INT A -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64
pci 0000:87:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:87:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65
pci 0000:88:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64
pci 0000:88:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67
pci 0000:8b:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:8b:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65
pci 0000:8c:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64
pci 0000:8c:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67

As it can be seen that GSIs now get mapped lineary.

[ Impact: simplify irq number mapping on bigger 32-bit systems ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A01C35C.7060207@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 6ee96b5..fb5e882 100644 (file)
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1162,22 +1162,9 @@ int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
 {
        int ioapic;
        int ioapic_pin;
-#ifdef CONFIG_X86_32
-#define MAX_GSI_NUM    4096
-#define IRQ_COMPRESSION_START  64
-
-       static int pci_irq = IRQ_COMPRESSION_START;
-       /*
-        * Mapping between Global System Interrupts, which
-        * represent all possible interrupts, and IRQs
-        * assigned to actual devices.
-        */
-       static int gsi_to_irq[MAX_GSI_NUM];
-#else
 
        if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
                return gsi;
-#endif
 
        /* Don't set up the ACPI SCI because it's already set up */
        if (acpi_gbl_FADT.sci_interrupt == gsi)
@@ -1196,66 +1183,28 @@ int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
                gsi = ioapic_renumber_irq(ioapic, gsi);
 #endif
 
-       /*
-        * Avoid pin reprogramming.  PRTs typically include entries
-        * with redundant pin->gsi mappings (but unique PCI devices);
-        * we only program the IOAPIC on the first.
-        */
        if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
                printk(KERN_ERR "Invalid reference to IOAPIC pin "
                       "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
                       ioapic_pin);
                return gsi;
        }
+
+       /*
+        * Avoid pin reprogramming.  PRTs typically include entries
+        * with redundant pin->gsi mappings (but unique PCI devices);
+        * we only program the IOAPIC on the first.
+        */
        if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
                pr_debug("Pin %d-%d already programmed\n",
                         mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-#ifdef CONFIG_X86_32
-               return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
-#else
                return gsi;
-#endif
        }
-
        set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
-#ifdef CONFIG_X86_32
-       /*
-        * For GSI >= 64, use IRQ compression
-        */
-       if ((gsi >= IRQ_COMPRESSION_START)
-           && (triggering == ACPI_LEVEL_SENSITIVE)) {
-               /*
-                * For PCI devices assign IRQs in order, avoiding gaps
-                * due to unused I/O APIC pins.
-                */
-               int irq = gsi;
-               if (gsi < MAX_GSI_NUM) {
-                       /*
-                        * Retain the VIA chipset work-around (gsi > 15), but
-                        * avoid a problem where the 8254 timer (IRQ0) is setup
-                        * via an override (so it's not on pin 0 of the ioapic),
-                        * and at the same time, the pin 0 interrupt is a PCI
-                        * type.  The gsi > 15 test could cause these two pins
-                        * to be shared as IRQ0, and they are not shareable.
-                        * So test for this condition, and if necessary, avoid
-                        * the pin collision.
-                        */
-                       gsi = pci_irq++;
-                       /*
-                        * Don't assign IRQ used by ACPI SCI
-                        */
-                       if (gsi == acpi_gbl_FADT.sci_interrupt)
-                               gsi = pci_irq++;
-                       gsi_to_irq[irq] = gsi;
-               } else {
-                       printk(KERN_ERR "GSI %u is too high\n", gsi);
-                       return gsi;
-               }
-       }
-#endif
        io_apic_set_pci_routing(dev, ioapic, ioapic_pin, gsi,
                                triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
                                polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+
        return gsi;
 }