+++ /dev/null
---- udev-081/Makefile.orig 2006-01-29 12:36:33.000000000 +0100
-+++ udev-081/Makefile 2006-01-29 12:36:58.000000000 +0100
-@@ -123,29 +123,29 @@
- STRIP = $(CROSS)strip
- STRIPCMD = $(STRIP) -s
-
--CFLAGS = -g -Wall -pipe -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64
-+override CFLAGS = -g -Wall -pipe -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64
- WARNINGS = -Wstrict-prototypes -Wsign-compare -Wshadow \
- -Wchar-subscripts -Wmissing-declarations -Wnested-externs \
- -Wpointer-arith -Wcast-align -Wsign-compare -Wmissing-prototypes
--CFLAGS += $(WARNINGS)
-+override CFLAGS += $(WARNINGS)
-
- LDFLAGS = -Wl,-warn-common
-
- OPTFLAGS = -Os
--CFLAGS += $(OPTFLAGS)
-+override CFLAGS += $(OPTFLAGS)
-
- ifeq ($(strip $(USE_LOG)),true)
-- CFLAGS += -DUSE_LOG
-+ override CFLAGS += -DUSE_LOG
- endif
-
- # if DEBUG is enabled, then we do not strip
- ifeq ($(strip $(DEBUG)),true)
-- CFLAGS += -DDEBUG
-+ override CFLAGS += -DDEBUG
- STRIPCMD =
- endif
-
- ifeq ($(strip $(USE_GCOV)),true)
-- CFLAGS += -fprofile-arcs -ftest-coverage
-+ override CFLAGS += -fprofile-arcs -ftest-coverage
- LDFLAGS += -fprofile-arcs
- endif
-
-@@ -160,11 +160,11 @@
- ifeq ($(strip $(USE_SELINUX)),true)
- UDEV_OBJS += udev_selinux.o
- LIB_OBJS += -lselinux -lsepol
-- CFLAGS += -DUSE_SELINUX
-+ override CFLAGS += -DUSE_SELINUX
- endif
-
- ifeq ($(strip $(USE_STATIC)),true)
-- CFLAGS += -DUSE_STATIC
-+ override CFLAGS += -DUSE_STATIC
- LDFLAGS += -static
- endif
-
+++ /dev/null
-#!/bin/sh -e
-### BEGIN INIT INFO
-# Provides: udev
-# Required-Start: mountvirtfs
-# Required-Stop:
-# Default-Start: S
-# Default-Stop:
-# Short-Description: Start udevd, populate /dev and load drivers.
-### END INIT INFO
-
-# we need to unmount /dev/pts/ and remount it later over the tmpfs
-unmount_devpts() {
- if mountpoint -q /dev/pts/; then
- umount -l /dev/pts/
- fi
-
- if mountpoint -q /dev/shm/; then
- umount -l /dev/shm/
- fi
-}
-
-# mount a tmpfs over /dev, if somebody did not already do it
-mount_tmpfs() {
- if grep -E -q "^[^[:space:]]+ /dev tmpfs" /proc/mounts; then
- return
- fi
-
- # /dev/.static/dev/ is used by MAKEDEV to access the real /dev/ directory.
- # /etc/udev/ is recycled as a temporary mount point because it's the only
- # directory which is guaranteed to be available.
- mount -n -o bind /dev /etc/udev
-
- if ! mount -n -o size=$tmpfs_size,mode=0755 -t tmpfs tmpfs /dev; then
- umount /etc/udev
- echo "udev requires tmpfs support, not started."
- exit 1
- fi
-
- mkdir -p /dev/.static/dev
- chmod 700 /dev/.static/
- # The mount options in busybox are non-standard...
- if test -x /bin/mount.util-linux
- then
- /bin/mount.util-linux --move /etc/udev /dev/.static/dev
- elif test -x /bin/busybox
- then
- busybox mount -n -o move /etc/udev /dev/.static/dev
- else
- echo "udev requires an identifiable mount command, not started."
- umount /etc/udev
- umount /dev
- exit 1
- fi
-}
-
-# I hate this hack. -- Md
-make_extra_nodes() {
- if [ "$(echo /lib/udev/devices/*)" != "/lib/udev/devices/*" ]; then
- cp -a /lib/udev/devices/* /dev/
- fi
-
- [ -e /etc/udev/links.conf ] || return 0
- grep '^[^#]' /etc/udev/links.conf | \
- while read type name arg1; do
- [ "$type" -a "$name" -a ! -e "/dev/$name" -a ! -L "/dev/$name" ] ||continue
- case "$type" in
- L) ln -s $arg1 /dev/$name ;;
- D) mkdir -p /dev/$name ;;
- M) mknod -m 600 /dev/$name $arg1 ;;
- *) echo "links.conf: unparseable line ($type $name $arg1)" ;;
- esac
- done
-}
-
-supported_kernel() {
- case "$(uname -r)" in
- 2.[012345].*|2.6.[0-9]|2.6.[0-9][!0-9]*) return 1 ;;
- 2.6.1[01]|2.6.1[01][!0-9]*) return 1 ;;
- esac
- return 0
-}
-
-set_hotplug_handler() {
- case "$(uname -r)" in
- 2.6.1[0-4]|2.6.1[0-4][!0-9]*) HANDLER='/sbin/udevsend' ;;
- esac
- echo $HANDLER > /proc/sys/kernel/hotplug
-}
-
-# shell version of /usr/bin/tty
-my_tty() {
- [ -x /bin/readlink ] || return 0
- [ -e /proc/self/fd/0 ] || return 0
- readlink --silent /proc/self/fd/0 || true
-}
-
-warn_if_interactive() {
- if [ "$RUNLEVEL" = "S" -a "$PREVLEVEL" = "N" ]; then
- return
- fi
-
- TTY=$(my_tty)
- if [ -z "$TTY" -o "$TTY" = "/dev/console" ]; then
- return
- fi
-
- printf "\n\n\nIt has been detected that the command\n\n\t$0 $*\n\n"
- printf "has been run from an interactive shell.\n"
- printf "It will probably not do what you expect, so this script will wait\n"
- printf "60 seconds before continuing. Press ^C to stop it.\n"
- printf "RUNNING THIS COMMAND IS HIGHLY DISCOURAGED!\n\n\n\n"
- sleep 60
-}
-
-##############################################################################
-
-PATH="/sbin:/bin:/usr/bin"
-
-[ -x /sbin/udevd ] || exit 0
-
-# defaults
-tmpfs_size="10M"
-udev_root="/dev"
-udevd_timeout=30
-
-. /etc/udev/udev.conf
-
-if ! supported_kernel; then
- echo "udev requires a kernel >= 2.6.12, not started."
- exit 1
-fi
-
-if [ ! -e /proc/filesystems ]; then
- echo "udev requires a mounted procfs, not started."
- exit 1
-fi
-
-if ! grep -q '[[:space:]]tmpfs$' /proc/filesystems; then
- echo "udev requires tmpfs support, not started."
- exit 1
-fi
-
-if [ ! -d /sys/class/ ]; then
- echo "udev requires a mounted sysfs, not started."
- exit 1
-fi
-
-if [ ! -e /proc/sys/kernel/hotplug ]; then
- echo "udev requires hotplug support, not started."
- exit 1
-fi
-
-##############################################################################
-
-# When modifying this script, do not forget that between the time that
-# the new /dev has been mounted and udevsynthesize has been run there will be
-# no /dev/null. This also means that you cannot use the "&" shell command.
-
-case "$1" in
- start)
- if [ -e "$udev_root/.udev/" ]; then
- if mountpoint -q /dev/; then
- TMPFS_MOUNTED=1
- else
- echo ".udev/ already exists on the static $udev_root!"
- fi
- else
- warn_if_interactive
- fi
-
- echo "Starting the hotplug events dispatcher" "udevd"
- udevd --daemon
-
- set_hotplug_handler
-
- if [ -z "$TMPFS_MOUNTED" ]; then
- unmount_devpts
- mount_tmpfs
- [ -d /proc/1 ] || mount -n /proc
- fi
-
- # if this directory is not present /dev will not be updated by udev
- mkdir -p /dev/.udev/ /dev/.udev/db/ /dev/.udev/queue/ /dev/.udevdb/
- # /dev/null must be created before udevd is started
- make_extra_nodes
-
- echo "Synthesizing the initial hotplug events"
- udevsynthesize
-
- # wait for the udevd childs to finish
- echo "Waiting for /dev to be fully populated"
- while [ -d /dev/.udev/queue/ ]; do
- sleep 1
- udevd_timeout=$(($udevd_timeout - 1))
- if [ $udevd_timeout -eq 0 ]; then
- # ps axf
- break
- fi
- done
- if [ $udevd_timeout -eq 0 ]; then
- echo 'timeout'
- fi
- ;;
-
- stop)
- echo "Stopping the hotplug events dispatcher" "udevd"
- start-stop-daemon --stop --name udevd --quiet
- ;;
-
- restart|force-reload)
- echo "Stopping the hotplug events dispatcher" "udevd"
- if start-stop-daemon --stop --name udevd --quiet ; then
- exit 1
- fi
-
- echo "Starting the hotplug events dispatcher" "udevd"
- udevd --daemon
- ;;
-
- *)
- echo "Usage: /etc/init.d/udev {start|stop|restart|force-reload}"
- exit 1
- ;;
-esac
-
-exit 0
-
+++ /dev/null
-# There are a number of modifiers that are allowed to be used in some
-# of the different fields. They provide the following subsitutions:
-#
-# %n the "kernel number" of the device.
-# For example, 'sda3' has a "kernel number" of '3'
-# %e the smallest number for that name which does not matches an existing node
-# %k the kernel name for the device
-# %M the kernel major number for the device
-# %m the kernel minor number for the device
-# %b the bus id for the device
-# %c the string returned by the PROGRAM
-# %s{filename} the content of a sysfs attribute
-# %% the '%' char itself
-#
-
-# Media automounting
-SUBSYSTEM=="block", ACTION=="add" RUN+="/etc/udev/scripts/mount.sh"
-SUBSYSTEM=="block", ACTION=="remove" RUN+="/etc/udev/scripts/mount.sh"
-
-# Handle network interface setup
-SUBSYSTEM=="net", ACTION=="add" RUN+="/etc/udev/scripts/network.sh"
-SUBSYSTEM=="net", ACTION=="remove" RUN+="/etc/udev/scripts/network.sh"
-
-# The first rtc device is symlinked to /dev/rtc
-KERNEL="rtc0", SYMLINK="rtc"
-
-# Try and modprobe for drivers for new hardware
-ACTION="add", DEVPATH="/devices/*", MODALIAS=="?*", RUN+="/sbin/modprobe $modalias"
+++ /dev/null
-# There are a number of modifiers that are allowed to be used in some
-# of the different fields. They provide the following subsitutions:
-#
-# %n the "kernel number" of the device.
-# For example, 'sda3' has a "kernel number" of '3'
-# %e the smallest number for that name which does not matches an existing node
-# %k the kernel name for the device
-# %M the kernel major number for the device
-# %m the kernel minor number for the device
-# %b the bus id for the device
-# %c the string returned by the PROGRAM
-# %s{filename} the content of a sysfs attribute
-# %% the '%' char itself
-#
-
-# SCSI devices
-BUS=="scsi", KERNEL=="sr[0-9]*", NAME="scd%n", SYMLINK+="sr%n"
-SUBSYSTEM=="scsi_device", SYSFS{type}=="0|7|14", RUN+="/sbin/modprobe sd_mod"
-
-# USB devices
-BUS=="usb", KERNEL=="auer[0-9]*", NAME="usb/%k"
-BUS=="usb", KERNEL=="cpad[0-9]*", NAME="usb/%k"
-BUS=="usb", KERNEL=="dabusb*", NAME="usb/%k"
-BUS=="usb", KERNEL=="hiddev*", NAME="usb/%k"
-BUS=="usb", KERNEL=="legousbtower*", NAME="usb/%k"
-BUS=="usb", KERNEL=="lp[0-9]*", NAME="usb/%k"
-BUS=="usb", KERNEL=="ttyUSB*", SYSFS{product}=="Palm Handheld*", \
- SYMLINK+="pilot"
-
-# usbfs-like devices
-SUBSYSTEM=="usb_device", \
- PROGRAM="/bin/sh -c 'export X=%k; export X=$${X#usbdev}; export B=$${X%%%%.*}; export D=$${X#*.}; echo bus/usb/$$B/$$D'", SYMLINK+="%c"
-
-# serial devices
-KERNEL=="capi", NAME="capi20", SYMLINK+="isdn/capi20"
-KERNEL=="capi[0-9]*", NAME="capi/%n"
-
-# video devices
-KERNEL=="card[0-9]*", NAME="dri/%k"
-
-# misc devices
-KERNEL=="hw_random", NAME="hwrng"
-KERNEL=="tun", NAME="net/%k"
-
-KERNEL=="cdemu[0-9]*", NAME="cdemu/%n"
-KERNEL=="pktcdvd[0-9]*", NAME="pktcdvd/%n"
-KERNEL=="pktcdvd", NAME="pktcdvd/control"
-
-KERNEL=="cpu[0-9]*", NAME="cpu/%n/cpuid"
-KERNEL=="msr[0-9]*", NAME="cpu/%n/msr"
-KERNEL=="microcode", NAME="cpu/microcode"
-
-KERNEL=="umad*", NAME="infiniband/%k"
-KERNEL=="issm*", NAME="infiniband/%k"
-KERNEL=="uverbs*", NAME="infiniband/%k"
-KERNEL=="ucm", NAME="infiniband/%k"
-
-KERNEL=="buzzer", NAME="misc/buzzer"
-
-# ALSA devices
-KERNEL=="controlC[0-9]*", NAME="snd/%k"
-KERNEL=="hwC[D0-9]*", NAME="snd/%k"
-KERNEL=="pcmC[D0-9cp]*", NAME="snd/%k"
-KERNEL=="midiC[D0-9]*", NAME="snd/%k"
-KERNEL=="timer", NAME="snd/%k"
-KERNEL=="seq", NAME="snd/%k"
-
-# ieee1394 devices
-KERNEL=="dv1394*", NAME="dv1394/%n"
-KERNEL=="video1394*", NAME="video1394/%n"
-
-# input devices
-KERNEL=="mice", NAME="input/%k"
-KERNEL=="mouse[0-9]*", NAME="input/%k"
-KERNEL=="event[0-9]*", NAME="input/%k"
-KERNEL=="js[0-9]*", NAME="input/%k"
-KERNEL=="ts[0-9]*", NAME="input/%k"
-KERNEL=="uinput", NAME="input/%k"
-
-# Zaptel
-KERNEL=="zapctl", NAME="zap/ctl"
-KERNEL=="zaptimer", NAME="zap/timer"
-KERNEL=="zapchannel", NAME="zap/channel"
-KERNEL=="zappseudo", NAME="zap/pseudo"
-KERNEL=="zap[0-9]*", NAME="zap/%n"
-
-# AOE character devices
-SUBSYSTEM=="aoe", KERNEL=="discover", NAME="etherd/%k"
-SUBSYSTEM=="aoe", KERNEL=="err", NAME="etherd/%k"
-SUBSYSTEM=="aoe", KERNEL=="interfaces", NAME="etherd/%k"
-
-# device mapper creates its own device nodes, so ignore these
-KERNEL=="dm-[0-9]*", OPTIONS+="ignore_device"
-KERNEL=="device-mapper", NAME="mapper/control"
-
-KERNEL="rfcomm[0-9]*", NAME="%k", GROUP="users", MODE="0660"
-
-# Firmware Helper
-ACTION=="add", SUBSYSTEM=="firmware", RUN+="/lib/udev/firmware_helper"
+++ /dev/null
---- udev-089/Makefile.orig 2006-04-08 13:32:53.000000000 +0200
-+++ udev-089/Makefile 2006-04-08 13:34:27.000000000 +0200
-@@ -117,28 +117,28 @@
- AR = $(CROSS_COMPILE)ar
- RANLIB = $(CROSS_COMPILE)ranlib
-
--CFLAGS = -g -Wall -pipe -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64
-+override CFLAGS = -g -Wall -pipe -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64
- WARNINGS = -Wstrict-prototypes -Wsign-compare -Wshadow \
- -Wchar-subscripts -Wmissing-declarations -Wnested-externs \
- -Wpointer-arith -Wcast-align -Wsign-compare -Wmissing-prototypes
--CFLAGS += $(WARNINGS)
-+override CFLAGS += $(WARNINGS)
-
- LDFLAGS = -Wl,-warn-common
-
- OPTFLAGS = -Os
--CFLAGS += $(OPTFLAGS)
-+override CFLAGS += $(OPTFLAGS)
-
- ifeq ($(strip $(USE_LOG)),true)
-- CFLAGS += -DUSE_LOG
-+ override CFLAGS += -DUSE_LOG
- endif
-
- # if DEBUG is enabled, then we do not strip
- ifeq ($(strip $(DEBUG)),true)
-- CFLAGS += -DDEBUG
-+ override CFLAGS += -DDEBUG
- endif
-
- ifeq ($(strip $(USE_GCOV)),true)
-- CFLAGS += -fprofile-arcs -ftest-coverage
-+ override CFLAGS += -fprofile-arcs -ftest-coverage
- LDFLAGS += -fprofile-arcs
- endif
-
-@@ -151,11 +151,11 @@
- ifeq ($(strip $(USE_SELINUX)),true)
- UDEV_OBJS += udev_selinux.o
- LIB_OBJS += -lselinux -lsepol
-- CFLAGS += -DUSE_SELINUX
-+ override CFLAGS += -DUSE_SELINUX
- endif
-
- ifeq ($(strip $(USE_STATIC)),true)
-- CFLAGS += -DUSE_STATIC
-+ override CFLAGS += -DUSE_STATIC
- LDFLAGS += -static
- endif
-
+++ /dev/null
-#!/bin/sh -e
-### BEGIN INIT INFO
-# Provides: udev
-# Required-Start: mountvirtfs
-# Required-Stop:
-# Default-Start: S
-# Default-Stop:
-# Short-Description: Start udevd, populate /dev and load drivers.
-### END INIT INFO
-
-# we need to unmount /dev/pts/ and remount it later over the tmpfs
-unmount_devpts() {
- if mountpoint -q /dev/pts/; then
- umount -l /dev/pts/
- fi
-
- if mountpoint -q /dev/shm/; then
- umount -l /dev/shm/
- fi
-}
-
-# mount a tmpfs over /dev, if somebody did not already do it
-mount_tmpfs() {
- if grep -E -q "^[^[:space:]]+ /dev tmpfs" /proc/mounts; then
- return
- fi
-
- # /dev/.static/dev/ is used by MAKEDEV to access the real /dev/ directory.
- # /etc/udev/ is recycled as a temporary mount point because it's the only
- # directory which is guaranteed to be available.
- mount -n -o bind /dev /etc/udev
-
- if ! mount -n -o size=$tmpfs_size,mode=0755 -t tmpfs tmpfs /dev; then
- umount /etc/udev
- echo "udev requires tmpfs support, not started."
- exit 1
- fi
-
- mkdir -p /dev/.static/dev
- chmod 700 /dev/.static/
- # The mount options in busybox are non-standard...
- if test -x /bin/mount.util-linux
- then
- /bin/mount.util-linux --move /etc/udev /dev/.static/dev
- elif test -x /bin/busybox
- then
- busybox mount -n -o move /etc/udev /dev/.static/dev
- else
- echo "udev requires an identifiable mount command, not started."
- umount /etc/udev
- umount /dev
- exit 1
- fi
-}
-
-# I hate this hack. -- Md
-make_extra_nodes() {
- if [ "$(echo /lib/udev/devices/*)" != "/lib/udev/devices/*" ]; then
- cp -a /lib/udev/devices/* /dev/
- fi
-
- [ -e /etc/udev/links.conf ] || return 0
- grep '^[^#]' /etc/udev/links.conf | \
- while read type name arg1; do
- [ "$type" -a "$name" -a ! -e "/dev/$name" -a ! -L "/dev/$name" ] ||continue
- case "$type" in
- L) ln -s $arg1 /dev/$name ;;
- D) mkdir -p /dev/$name ;;
- M) mknod -m 600 /dev/$name $arg1 ;;
- *) echo "links.conf: unparseable line ($type $name $arg1)" ;;
- esac
- done
-}
-
-supported_kernel() {
- case "$(uname -r)" in
- 2.[012345].*|2.6.[0-9]|2.6.[0-9][!0-9]*) return 1 ;;
- 2.6.1[01]|2.6.1[01][!0-9]*) return 1 ;;
- esac
- return 0
-}
-
-set_hotplug_handler() {
- case "$(uname -r)" in
- 2.6.1[0-4]|2.6.1[0-4][!0-9]*) HANDLER='/sbin/udevsend' ;;
- esac
- echo $HANDLER > /proc/sys/kernel/hotplug
-}
-
-# shell version of /usr/bin/tty
-my_tty() {
- [ -x /bin/readlink ] || return 0
- [ -e /proc/self/fd/0 ] || return 0
- readlink --silent /proc/self/fd/0 || true
-}
-
-warn_if_interactive() {
- if [ "$RUNLEVEL" = "S" -a "$PREVLEVEL" = "N" ]; then
- return
- fi
-
- TTY=$(my_tty)
- if [ -z "$TTY" -o "$TTY" = "/dev/console" ]; then
- return
- fi
-
- printf "\n\n\nIt has been detected that the command\n\n\t$0 $*\n\n"
- printf "has been run from an interactive shell.\n"
- printf "It will probably not do what you expect, so this script will wait\n"
- printf "60 seconds before continuing. Press ^C to stop it.\n"
- printf "RUNNING THIS COMMAND IS HIGHLY DISCOURAGED!\n\n\n\n"
- sleep 60
-}
-
-##############################################################################
-
-PATH="/sbin:/bin:/usr/bin"
-
-[ -x /sbin/udevd ] || exit 0
-
-# defaults
-tmpfs_size="10M"
-udev_root="/dev"
-udevd_timeout=30
-
-. /etc/udev/udev.conf
-
-if ! supported_kernel; then
- echo "udev requires a kernel >= 2.6.12, not started."
- exit 1
-fi
-
-if [ ! -e /proc/filesystems ]; then
- echo "udev requires a mounted procfs, not started."
- exit 1
-fi
-
-if ! grep -q '[[:space:]]tmpfs$' /proc/filesystems; then
- echo "udev requires tmpfs support, not started."
- exit 1
-fi
-
-if [ ! -d /sys/class/ ]; then
- echo "udev requires a mounted sysfs, not started."
- exit 1
-fi
-
-if [ ! -e /proc/sys/kernel/hotplug ]; then
- echo "udev requires hotplug support, not started."
- exit 1
-fi
-
-##############################################################################
-
-# When modifying this script, do not forget that between the time that
-# the new /dev has been mounted and udevsynthesize has been run there will be
-# no /dev/null. This also means that you cannot use the "&" shell command.
-
-case "$1" in
- start)
- if [ -e "$udev_root/.udev/" ]; then
- if mountpoint -q /dev/; then
- TMPFS_MOUNTED=1
- else
- echo ".udev/ already exists on the static $udev_root!"
- fi
- else
- warn_if_interactive
- fi
-
- echo "Starting the hotplug events dispatcher" "udevd"
- udevd --daemon
-
- set_hotplug_handler
-
- if [ -z "$TMPFS_MOUNTED" ]; then
- unmount_devpts
- mount_tmpfs
- [ -d /proc/1 ] || mount -n /proc
- fi
-
- # if this directory is not present /dev will not be updated by udev
- mkdir -p /dev/.udev/ /dev/.udev/db/ /dev/.udev/queue/ /dev/.udevdb/
- # /dev/null must be created before udevd is started
- make_extra_nodes
-
- echo "Synthesizing the initial hotplug events"
- udevsynthesize
-
- # wait for the udevd childs to finish
- echo "Waiting for /dev to be fully populated"
- while [ -d /dev/.udev/queue/ ]; do
- sleep 1
- udevd_timeout=$(($udevd_timeout - 1))
- if [ $udevd_timeout -eq 0 ]; then
- # ps axf
- break
- fi
- done
- if [ $udevd_timeout -eq 0 ]; then
- echo 'timeout'
- fi
- ;;
-
- stop)
- echo "Stopping the hotplug events dispatcher" "udevd"
- start-stop-daemon --stop --name udevd --quiet
- ;;
-
- restart|force-reload)
- echo "Stopping the hotplug events dispatcher" "udevd"
- if start-stop-daemon --stop --name udevd --quiet ; then
- exit 1
- fi
-
- echo "Starting the hotplug events dispatcher" "udevd"
- udevd --daemon
- ;;
-
- *)
- echo "Usage: /etc/init.d/udev {start|stop|restart|force-reload}"
- exit 1
- ;;
-esac
-
-exit 0
-
+++ /dev/null
-# There are a number of modifiers that are allowed to be used in some
-# of the different fields. They provide the following subsitutions:
-#
-# %n the "kernel number" of the device.
-# For example, 'sda3' has a "kernel number" of '3'
-# %e the smallest number for that name which does not matches an existing node
-# %k the kernel name for the device
-# %M the kernel major number for the device
-# %m the kernel minor number for the device
-# %b the bus id for the device
-# %c the string returned by the PROGRAM
-# %s{filename} the content of a sysfs attribute
-# %% the '%' char itself
-#
-
-# Media automounting
-SUBSYSTEM=="block", ACTION=="add" RUN+="/etc/udev/scripts/mount.sh"
-SUBSYSTEM=="block", ACTION=="remove" RUN+="/etc/udev/scripts/mount.sh"
-
-# Handle network interface setup
-SUBSYSTEM=="net", ACTION=="add" RUN+="/etc/udev/scripts/network.sh"
-SUBSYSTEM=="net", ACTION=="remove" RUN+="/etc/udev/scripts/network.sh"
-
-# The first rtc device is symlinked to /dev/rtc
-KERNEL="rtc0", SYMLINK="rtc"
-
-# Try and modprobe for drivers for new hardware
-ACTION="add", DEVPATH="/devices/*", MODALIAS=="?*", RUN+="/sbin/modprobe $modalias"
+++ /dev/null
-# There are a number of modifiers that are allowed to be used in some
-# of the different fields. They provide the following subsitutions:
-#
-# %n the "kernel number" of the device.
-# For example, 'sda3' has a "kernel number" of '3'
-# %e the smallest number for that name which does not matches an existing node
-# %k the kernel name for the device
-# %M the kernel major number for the device
-# %m the kernel minor number for the device
-# %b the bus id for the device
-# %c the string returned by the PROGRAM
-# %s{filename} the content of a sysfs attribute
-# %% the '%' char itself
-#
-
-# SCSI devices
-BUS=="scsi", KERNEL=="sr[0-9]*", NAME="scd%n", SYMLINK+="sr%n"
-
-# USB devices
-BUS=="usb", KERNEL=="auer[0-9]*", NAME="usb/%k"
-BUS=="usb", KERNEL=="cpad[0-9]*", NAME="usb/%k"
-BUS=="usb", KERNEL=="dabusb*", NAME="usb/%k"
-BUS=="usb", KERNEL=="hiddev*", NAME="usb/%k"
-BUS=="usb", KERNEL=="legousbtower*", NAME="usb/%k"
-BUS=="usb", KERNEL=="lp[0-9]*", NAME="usb/%k"
-BUS=="usb", KERNEL=="ttyUSB*", SYSFS{product}=="Palm Handheld*", \
- SYMLINK+="pilot"
-
-# usbfs-like devices
-SUBSYSTEM=="usb_device", \
- PROGRAM="/bin/sh -c 'export X=%k; export X=$${X#usbdev}; export B=$${X%%%%.*}; export D=$${X#*.}; echo bus/usb/$$B/$$D'", SYMLINK+="%c"
-
-# serial devices
-KERNEL=="capi", NAME="capi20", SYMLINK+="isdn/capi20"
-KERNEL=="capi[0-9]*", NAME="capi/%n"
-
-# video devices
-KERNEL=="card[0-9]*", NAME="dri/%k"
-
-# misc devices
-KERNEL=="hw_random", NAME="hwrng"
-KERNEL=="tun", NAME="net/%k"
-
-KERNEL=="cdemu[0-9]*", NAME="cdemu/%n"
-KERNEL=="pktcdvd[0-9]*", NAME="pktcdvd/%n"
-KERNEL=="pktcdvd", NAME="pktcdvd/control"
-
-KERNEL=="cpu[0-9]*", NAME="cpu/%n/cpuid"
-KERNEL=="msr[0-9]*", NAME="cpu/%n/msr"
-KERNEL=="microcode", NAME="cpu/microcode"
-
-KERNEL=="umad*", NAME="infiniband/%k"
-KERNEL=="issm*", NAME="infiniband/%k"
-KERNEL=="uverbs*", NAME="infiniband/%k"
-KERNEL=="ucm", NAME="infiniband/%k"
-
-KERNEL=="buzzer", NAME="misc/buzzer"
-
-# ALSA devices
-KERNEL=="controlC[0-9]*", NAME="snd/%k"
-KERNEL=="hwC[D0-9]*", NAME="snd/%k"
-KERNEL=="pcmC[D0-9cp]*", NAME="snd/%k"
-KERNEL=="midiC[D0-9]*", NAME="snd/%k"
-KERNEL=="timer", NAME="snd/%k"
-KERNEL=="seq", NAME="snd/%k"
-
-# ieee1394 devices
-KERNEL=="dv1394*", NAME="dv1394/%n"
-KERNEL=="video1394*", NAME="video1394/%n"
-
-# input devices
-KERNEL=="mice", NAME="input/%k"
-KERNEL=="mouse[0-9]*", NAME="input/%k"
-KERNEL=="event[0-9]*", NAME="input/%k"
-KERNEL=="js[0-9]*", NAME="input/%k"
-KERNEL=="ts[0-9]*", NAME="input/%k"
-KERNEL=="uinput", NAME="input/%k"
-
-# Zaptel
-KERNEL=="zapctl", NAME="zap/ctl"
-KERNEL=="zaptimer", NAME="zap/timer"
-KERNEL=="zapchannel", NAME="zap/channel"
-KERNEL=="zappseudo", NAME="zap/pseudo"
-KERNEL=="zap[0-9]*", NAME="zap/%n"
-
-# AOE character devices
-SUBSYSTEM=="aoe", KERNEL=="discover", NAME="etherd/%k"
-SUBSYSTEM=="aoe", KERNEL=="err", NAME="etherd/%k"
-SUBSYSTEM=="aoe", KERNEL=="interfaces", NAME="etherd/%k"
-
-# device mapper creates its own device nodes, so ignore these
-KERNEL=="dm-[0-9]*", OPTIONS+="ignore_device"
-KERNEL=="device-mapper", NAME="mapper/control"
-
-KERNEL="rfcomm[0-9]*", NAME="%k", GROUP="users", MODE="0660"
-
-# Firmware Helper
-ACTION=="add", SUBSYSTEM=="firmware", RUN+="/lib/udev/firmware_helper"
+++ /dev/null
-DESCRIPTION = "udev is a daemon which dynamically creates and removes device nodes from \
-/dev/, handles hotplug events and loads drivers at boot time. It replaces \
-the hotplug package and requires a kernel not older than 2.6.12."
-RPROVIDES = "hotplug"
-
-SRC_URI = "http://kernel.org/pub/linux/utils/kernel/hotplug/udev-${PV}.tar.gz \
- file://noasmlinkage.patch;patch=1 \
- file://flags.patch;patch=1 \
- file://udevsynthesize.patch;patch=1 \
- file://udevsynthesize.sh \
- file://mount.blacklist \
- file://udev_network_queue.sh"
-
-require udev.inc
-
-INITSCRIPT_PARAMS = "start 03 S ."
-
-PR = "r13"
-
-FILES_${PN} += "${base_libdir}"
-UDEV_EXTRAS = "extras/firmware/ extras/scsi_id/ extras/volume_id/ extras/run_directory/"
-EXTRA_OEMAKE += "libudevdir=/lib/udev"
-
-do_install () {
- install -d ${D}${usrsbindir} \
- ${D}${sbindir}
- oe_runmake 'DESTDIR=${D}' INSTALL=install install
- install -d ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/udev
- install -m 0755 ${WORKDIR}/udev_network_queue.sh ${D}${sysconfdir}/init.d/
-
- install -d ${D}${sysconfdir}/udev/rules.d/
-
- install -m 0644 ${WORKDIR}/mount.blacklist ${D}${sysconfdir}/udev/
- install -m 0644 ${WORKDIR}/local.rules ${D}${sysconfdir}/udev/rules.d/local.rules
- install -m 0644 ${WORKDIR}/permissions.rules ${D}${sysconfdir}/udev/rules.d/permissions.rules
- install -m 0644 ${WORKDIR}/udev.rules ${D}${sysconfdir}/udev/rules.d/udev.rules
- if [ "${UDEV_DEVFS_RULES}" = "1" ]; then
- install -m 0644 ${WORKDIR}/devfs-udev.rules ${D}${sysconfdir}/udev/rules.d/devfs-udev.rules
- fi
-
- install -d ${D}${sysconfdir}/udev/scripts/
-
- install -m 0755 ${WORKDIR}/mount.sh ${D}${sysconfdir}/udev/scripts/mount.sh
- install -m 0755 ${WORKDIR}/network.sh ${D}${sysconfdir}/udev/scripts
-
- install -d ${D}${base_libdir}/udev/
- install -m 0755 ${S}/udevsynthesize ${D}${base_libdir}/udev/udevsynthesize
- install -m 0755 ${WORKDIR}/udevsynthesize.sh ${D}${sbindir}/udevsynthesize
-}
-
-
-pkg_postinst_append() {
- update-rc.d -s udev_network_queue.sh start 41 S . start 55 0 6 .
-}
-
-
-pkg_postrm_append() {
- update-rc.d -f udev_network_queue.sh remove
-}
+++ /dev/null
-DESCRIPTION = "udev is a daemon which dynamically creates and removes device nodes from \
-/dev/, handles hotplug events and loads drivers at boot time. It replaces \
-the hotplug package and requires a kernel not older than 2.6.12."
-RPROVIDES = "hotplug"
-
-PR = "r2"
-
-SRC_URI = "http://kernel.org/pub/linux/utils/kernel/hotplug/udev-${PV}.tar.gz \
- file://noasmlinkage.patch;patch=1 \
- file://flags.patch;patch=1 \
- file://udevsynthesize.patch;patch=1 \
- file://udevsynthesize.sh \
- file://mount.blacklist"
-
-require udev.inc
-
-INITSCRIPT_PARAMS = "start 03 S ."
-
-FILES_${PN} += "${base_libdir}"
-UDEV_EXTRAS = "extras/firmware/ extras/scsi_id/ extras/volume_id/ extras/run_directory/"
-EXTRA_OEMAKE += "libudevdir=/lib/udev"
-
-do_install () {
- install -d ${D}${usrsbindir} \
- ${D}${sbindir}
- oe_runmake 'DESTDIR=${D}' INSTALL=install install
- install -d ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/udev
-
- install -d ${D}${sysconfdir}/udev/rules.d/
-
- install -m 0644 ${WORKDIR}/mount.blacklist ${D}${sysconfdir}/udev/
- install -m 0644 ${WORKDIR}/local.rules ${D}${sysconfdir}/udev/rules.d/local.rules
- install -m 0644 ${WORKDIR}/permissions.rules ${D}${sysconfdir}/udev/rules.d/permissions.rules
- install -m 0644 ${WORKDIR}/udev.rules ${D}${sysconfdir}/udev/rules.d/udev.rules
- install -m 0644 ${WORKDIR}/links.conf ${D}${sysconfdir}/udev/links.conf
- if [ "${UDEV_DEVFS_RULES}" = "1" ]; then
- install -m 0644 ${WORKDIR}/devfs-udev.rules ${D}${sysconfdir}/udev/rules.d/devfs-udev.rules
- fi
-
- install -d ${D}${sysconfdir}/udev/scripts/
-
- install -m 0755 ${WORKDIR}/mount.sh ${D}${sysconfdir}/udev/scripts/mount.sh
- install -m 0755 ${WORKDIR}/network.sh ${D}${sysconfdir}/udev/scripts
-
- install -d ${D}${base_libdir}/udev/
- install -m 0755 ${S}/udevsynthesize ${D}${base_libdir}/udev/udevsynthesize
- install -m 0755 ${WORKDIR}/udevsynthesize.sh ${D}${sbindir}/udevsynthesize
-}
projects / scm / bb / tizen-distro.git / commitdiff