#include <linux/termios.h>
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
+#include <linux/clocksource.h>
#include <linux/io.h>
#include <asm/clkdev.h>
#define TIMER0_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000000)
#define TIMER1_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000100)
#define TIMER2_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000200)
-#define VA_IC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE)
/*
* How long is the timer interval?
static unsigned long timer_reload;
-/*
- * Returns number of ms since last clock interrupt. Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-unsigned long integrator_gettimeoffset(void)
+static void __iomem * const clksrc_base = (void __iomem *)TIMER2_VA_BASE;
+
+static cycle_t timersp_read(struct clocksource *cs)
{
- unsigned long ticks1, ticks2, status;
+ return ~(readl(clksrc_base + TIMER_VALUE) & 0xffff);
+}
- /*
- * Get the current number of ticks. Note that there is a race
- * condition between us reading the timer and checking for
- * an interrupt. We get around this by ensuring that the
- * counter has not reloaded between our two reads.
- */
- ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
- do {
- ticks1 = ticks2;
- status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS);
- ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
- } while (ticks2 > ticks1);
+static struct clocksource clocksource_timersp = {
+ .name = "timer2",
+ .rating = 200,
+ .read = timersp_read,
+ .mask = CLOCKSOURCE_MASK(16),
+ .shift = 16,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
- /*
- * Number of ticks since last interrupt.
- */
- ticks1 = timer_reload - ticks2;
+static void integrator_clocksource_init(u32 khz)
+{
+ struct clocksource *cs = &clocksource_timersp;
+ void __iomem *base = clksrc_base;
+ u32 ctrl = TIMER_CTRL_ENABLE;
- /*
- * Interrupt pending? If so, we've reloaded once already.
- */
- if (status & (1 << IRQ_TIMERINT1))
- ticks1 += timer_reload;
+ if (khz >= 1500) {
+ khz /= 16;
+ ctrl = TIMER_CTRL_DIV16;
+ }
- /*
- * Convert the ticks to usecs
- */
- return TICKS2USECS(ticks1);
+ writel(ctrl, base + TIMER_CTRL);
+ writel(0xffff, base + TIMER_LOAD);
+
+ cs->mult = clocksource_khz2mult(khz, cs->shift);
+ clocksource_register(cs);
}
/*
{
unsigned int timer_ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
+ integrator_clocksource_init(reload * HZ / 1000);
+
timer_reload = reload;
timer_ctrl |= ctrl;