/* Remote debugging interface for boot monitors, for GDB.
- Copyright 1990, 1991, 1992, 1993, 1995 Free Software Foundation, Inc.
- Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
+ Copyright 1990, 1991, 1992, 1993, 1995
+ Free Software Foundation, Inc.
+ Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
+ Resurrected from the ashes by Stu Grossman.
This file is part of GDB.
#include <varargs.h>
#endif
#include <signal.h>
+#include <ctype.h>
#include "gdb_string.h"
#include <sys/types.h>
#include "command.h"
#include "monitor.h"
#include "gdbcmd.h"
#include "inferior.h"
-#include "regex.h"
+#include "gnu-regex.h"
#include "dcache.h"
+#include "srec.h"
static int readchar PARAMS ((int timeout));
static void monitor_command PARAMS ((char *args, int fromtty));
-static void monitor_load_srec PARAMS ((char *args));
-
-static int monitor_make_srec PARAMS ((char *buffer, int type,
- CORE_ADDR memaddr,
- unsigned char *myaddr, int len));
static void monitor_fetch_register PARAMS ((int regno));
static void monitor_store_register PARAMS ((int regno));
static void monitor_load PARAMS ((char *file, int from_tty));
static void monitor_mourn_inferior PARAMS ((void));
static void monitor_stop PARAMS ((void));
+static void monitor_debug PARAMS ((char *string));
static int monitor_read_memory PARAMS ((CORE_ADDR addr, char *myaddr,int len));
static int monitor_write_memory PARAMS ((CORE_ADDR addr, char *myaddr,int len));
static DCACHE *remote_dcache;
+/* monitor_debug is like fputs_unfiltered, except it prints special
+ characters in printable fashion. */
+
+static void
+monitor_debug (string)
+ char *string;
+{
+ int ch;
+
+ while ((ch = *string++) != '\0')
+ {
+ switch (ch) {
+ default:
+ if (isprint (ch))
+ fputc_unfiltered (ch, gdb_stderr);
+
+ else
+ fprintf_unfiltered (gdb_stderr, "\\%03o", ch);
+
+ break;
+
+ case '\\': fputs_unfiltered ("\\\\", gdb_stderr); break;
+ case '\b': fputs_unfiltered ("\\b", gdb_stderr); break;
+ case '\f': fputs_unfiltered ("\\f", gdb_stderr); break;
+ case '\n': fputs_unfiltered ("\\n\n", gdb_stderr); break;
+ case '\r': fputs_unfiltered ("\\r\n", gdb_stderr); break;
+ case '\t': fputs_unfiltered ("\\t", gdb_stderr); break;
+ case '\v': fputs_unfiltered ("\\v", gdb_stderr); break;
+ }
+ }
+}
+
+
/* monitor_printf_noecho -- Send data to monitor, but don't expect an echo.
Works just like printf. */
vsprintf (sndbuf, pattern, args);
if (remote_debug > 0)
- fputs_unfiltered (sndbuf, gdb_stderr);
+ monitor_debug (sndbuf);
len = strlen (sndbuf);
vsprintf (sndbuf, pattern, args);
if (remote_debug > 0)
- fputs_unfiltered (sndbuf, gdb_stderr);
+ monitor_debug (sndbuf);
len = strlen (sndbuf);
if (current_monitor->load_routine)
current_monitor->load_routine (monitor_desc, file, hashmark);
else
- monitor_load_srec (file);
+ { /* The default is ascii S-records */
+ monitor_printf (LOAD_CMD); /* tell the monitor to load */
+ if (current_monitor->loadresp)
+ monitor_expect (current_monitor->loadresp, NULL, 0);
+
+ load_srec (monitor_desc, file, 32, SREC_ALL, hashmark);
+
+ monitor_expect_prompt (NULL, 0);
+ }
/* Finally, make the PC point at the start address */
fputs_unfiltered (buf, gdb_stdout); /* Output the response */
}
-/* Download a binary file by converting it to S records. */
-
-static void
-monitor_load_srec (args)
- char *args;
-{
- bfd *abfd;
- asection *s;
- char *buffer, srec[1024];
- int i;
- int srec_frame = 32;
- int reclen;
-
- buffer = alloca (srec_frame * 2 + 256);
-
- abfd = bfd_openr (args, 0);
- if (!abfd)
- {
- printf_filtered ("Unable to open file %s\n", args);
- return;
- }
-
- if (bfd_check_format (abfd, bfd_object) == 0)
- {
- printf_filtered ("File is not an object file\n");
- return;
- }
-
- monitor_printf (LOAD_CMD); /* tell the monitor to load */
- if (current_monitor->loadresp)
- monitor_expect (current_monitor->loadresp, NULL, 0);
-
- for (s = abfd->sections; s; s = s->next)
- {
- if (s->flags & SEC_LOAD)
- {
- int numbytes;
-
- printf_filtered ("%s\t: 0x%4x .. 0x%4x ", s->name, s->vma,
- s->vma + s->_raw_size);
- gdb_flush (gdb_stdout);
-
- for (i = 0; i < s->_raw_size; i += numbytes)
- {
- numbytes = min (srec_frame, s->_raw_size - i);
-
- bfd_get_section_contents (abfd, s, buffer, i, numbytes);
-
- reclen = monitor_make_srec (srec, 'd', s->vma + i, buffer, numbytes);
-
- monitor_printf_noecho ("%.*s\r", reclen, srec);
-
- if (hashmark)
- {
- putchar_unfiltered ('#');
- gdb_flush (gdb_stdout);
- }
- } /* Per-packet (or S-record) loop */
-
- putchar_unfiltered ('\n');
- } /* Loadable sections */
- }
- if (hashmark)
- putchar_unfiltered ('\n');
-
- /* Write a type 7 terminator record. no data for a type 7, and there
- is no data, so len is 0. */
-
- reclen = monitor_make_srec (srec, 't', abfd->start_address, NULL, 0);
-
- monitor_printf_noecho ("%.*s\r", reclen, srec);
-
- monitor_printf_noecho ("\r\r"); /* Some monitors need these to wake up */
-
- monitor_expect_prompt (NULL, 0);
-
- SERIAL_FLUSH_INPUT (monitor_desc);
-}
-
-/*
- * monitor_make_srec -- make an srecord. This writes each line, one at a
- * time, each with it's own header and trailer line.
- * An srecord looks like this:
- *
- * byte count-+ address
- * start ---+ | | data +- checksum
- * | | | |
- * S01000006F6B692D746573742E73726563E4
- * S315000448600000000000000000FC00005900000000E9
- * S31A0004000023C1400037DE00F023604000377B009020825000348D
- * S30B0004485A0000000000004E
- * S70500040000F6
- *
- * S<type><length><address><data><checksum>
- *
- * Where
- * - length
- * is the number of bytes following upto the checksum. Note that
- * this is not the number of chars following, since it takes two
- * chars to represent a byte.
- * - type
- * is one of:
- * 0) header record
- * 1) two byte address data record
- * 2) three byte address data record
- * 3) four byte address data record
- * 7) four byte address termination record
- * 8) three byte address termination record
- * 9) two byte address termination record
- *
- * - address
- * is the start address of the data following, or in the case of
- * a termination record, the start address of the image
- * - data
- * is the data.
- * - checksum
- * is the sum of all the raw byte data in the record, from the length
- * upwards, modulo 256 and subtracted from 255.
- *
- * This routine returns the length of the S-record.
- *
- */
-
-static int
-monitor_make_srec (buffer, type, memaddr, myaddr, len)
- char *buffer;
- int type;
- CORE_ADDR memaddr;
- unsigned char *myaddr;
- int len;
-{
- unsigned char checksum;
- int i;
- char *buf;
- static char hextab[] = "0123456789ABCDEF";
- static char data_code_table[] = { 0,0,1,2,3};
- static char term_code_table[] = { 0,0,9,8,7};
- int addr_size; /* Number of bytes in the record */
- int type_code;
- buf = buffer;
-
- checksum = 0;
-
- addr_size = 2;
- if (memaddr > 0xffffff)
- addr_size = 4;
- else if (memaddr > 0xffff)
- addr_size = 3;
- else
- addr_size = 2;
-
- switch (type)
- {
- case 't':
- type_code = term_code_table[addr_size];
- break;
- case 'd':
- type_code = data_code_table[addr_size];
- break;
- default:
- abort();
- }
- /* Create the header for the srec. addr_size is the number of bytes in the address,
- and 1 is the number of bytes in the count. */
-
- switch (addr_size)
- {
- case 4:
- sprintf (buf, "S%d%02X%08X", type_code, len + addr_size + 1, memaddr);
- buf += 12;
- break;
- case 3:
- sprintf (buf, "S%d%02X%06X", type_code, len + addr_size + 1, memaddr);
- buf += 10;
- break;
- case 2:
- sprintf (buf, "S%d%02X%04X", type_code, len + addr_size + 1, memaddr);
- buf += 8;
- break;
- }
-
-/* Note that the checksum is calculated on the raw data, not the hexified
- data. It includes the length, address and the data portions of the
- packet. */
-
- checksum += (len + addr_size + 1 /* Packet length */
- + (memaddr & 0xff) /* Address... */
- + ((memaddr >> 8) & 0xff)
- + ((memaddr >> 16) & 0xff)
- + ((memaddr >> 24) & 0xff));
-
- /* build the srecord */
- for (i = 0; i < len; i++)
- {
- *buf++ = hextab [myaddr[i] >> 4];
- *buf++ = hextab [myaddr[i] & 0xf];
- checksum += myaddr[i];
- }
-
- checksum = ~checksum;
-
- *buf++ = hextab[checksum >> 4];
- *buf++ = hextab[checksum & 0xf];
-
- return buf - buffer;
-}
-
/* Convert hex digit A to a number. */
static int
projects / external / binutils.git / commitdiff