--- /dev/null
+/*
+ * Microchip KSZ9477 register definitions
+ *
+ * Copyright (C) 2017
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __KSZ9477_REGS_H
+#define __KSZ9477_REGS_H
+
+#define KS_PRIO_M 0x7
+#define KS_PRIO_S 4
+
+/* 0 - Operation */
+#define REG_CHIP_ID0__1 0x0000
+
+#define REG_CHIP_ID1__1 0x0001
+
+#define FAMILY_ID 0x95
+#define FAMILY_ID_94 0x94
+#define FAMILY_ID_95 0x95
+#define FAMILY_ID_85 0x85
+#define FAMILY_ID_98 0x98
+#define FAMILY_ID_88 0x88
+
+#define REG_CHIP_ID2__1 0x0002
+
+#define CHIP_ID_63 0x63
+#define CHIP_ID_66 0x66
+#define CHIP_ID_67 0x67
+#define CHIP_ID_77 0x77
+#define CHIP_ID_93 0x93
+#define CHIP_ID_96 0x96
+#define CHIP_ID_97 0x97
+
+#define REG_CHIP_ID3__1 0x0003
+
+#define SWITCH_REVISION_M 0x0F
+#define SWITCH_REVISION_S 4
+#define SWITCH_RESET 0x01
+
+#define REG_SW_PME_CTRL 0x0006
+
+#define PME_ENABLE BIT(1)
+#define PME_POLARITY BIT(0)
+
+#define REG_GLOBAL_OPTIONS 0x000F
+
+#define SW_GIGABIT_ABLE BIT(6)
+#define SW_REDUNDANCY_ABLE BIT(5)
+#define SW_AVB_ABLE BIT(4)
+#define SW_9567_RL_5_2 0xC
+#define SW_9477_SL_5_2 0xD
+
+#define SW_9896_GL_5_1 0xB
+#define SW_9896_RL_5_1 0x8
+#define SW_9896_SL_5_1 0x9
+
+#define SW_9895_GL_4_1 0x7
+#define SW_9895_RL_4_1 0x4
+#define SW_9895_SL_4_1 0x5
+
+#define SW_9896_RL_4_2 0x6
+
+#define SW_9893_RL_2_1 0x0
+#define SW_9893_SL_2_1 0x1
+#define SW_9893_GL_2_1 0x3
+
+#define SW_QW_ABLE BIT(5)
+#define SW_9893_RN_2_1 0xC
+
+#define REG_SW_INT_STATUS__4 0x0010
+#define REG_SW_INT_MASK__4 0x0014
+
+#define LUE_INT BIT(31)
+#define TRIG_TS_INT BIT(30)
+#define APB_TIMEOUT_INT BIT(29)
+
+#define SWITCH_INT_MASK (TRIG_TS_INT | APB_TIMEOUT_INT)
+
+#define REG_SW_PORT_INT_STATUS__4 0x0018
+#define REG_SW_PORT_INT_MASK__4 0x001C
+#define REG_SW_PHY_INT_STATUS 0x0020
+#define REG_SW_PHY_INT_ENABLE 0x0024
+
+/* 1 - Global */
+#define REG_SW_GLOBAL_SERIAL_CTRL_0 0x0100
+#define SW_SPARE_REG_2 BIT(7)
+#define SW_SPARE_REG_1 BIT(6)
+#define SW_SPARE_REG_0 BIT(5)
+#define SW_BIG_ENDIAN BIT(4)
+#define SPI_AUTO_EDGE_DETECTION BIT(1)
+#define SPI_CLOCK_OUT_RISING_EDGE BIT(0)
+
+#define REG_SW_GLOBAL_OUTPUT_CTRL__1 0x0103
+#define SW_ENABLE_REFCLKO BIT(1)
+#define SW_REFCLKO_IS_125MHZ BIT(0)
+
+#define REG_SW_IBA__4 0x0104
+
+#define SW_IBA_ENABLE BIT(31)
+#define SW_IBA_DA_MATCH BIT(30)
+#define SW_IBA_INIT BIT(29)
+#define SW_IBA_QID_M 0xF
+#define SW_IBA_QID_S 22
+#define SW_IBA_PORT_M 0x2F
+#define SW_IBA_PORT_S 16
+#define SW_IBA_FRAME_TPID_M 0xFFFF
+
+#define REG_SW_APB_TIMEOUT_ADDR__4 0x0108
+
+#define APB_TIMEOUT_ACKNOWLEDGE BIT(31)
+
+#define REG_SW_IBA_SYNC__1 0x010C
+
+#define REG_SW_IO_STRENGTH__1 0x010D
+#define SW_DRIVE_STRENGTH_M 0x7
+#define SW_DRIVE_STRENGTH_2MA 0
+#define SW_DRIVE_STRENGTH_4MA 1
+#define SW_DRIVE_STRENGTH_8MA 2
+#define SW_DRIVE_STRENGTH_12MA 3
+#define SW_DRIVE_STRENGTH_16MA 4
+#define SW_DRIVE_STRENGTH_20MA 5
+#define SW_DRIVE_STRENGTH_24MA 6
+#define SW_DRIVE_STRENGTH_28MA 7
+#define SW_HI_SPEED_DRIVE_STRENGTH_S 4
+#define SW_LO_SPEED_DRIVE_STRENGTH_S 0
+
+#define REG_SW_IBA_STATUS__4 0x0110
+
+#define SW_IBA_REQ BIT(31)
+#define SW_IBA_RESP BIT(30)
+#define SW_IBA_DA_MISMATCH BIT(14)
+#define SW_IBA_FMT_MISMATCH BIT(13)
+#define SW_IBA_CODE_ERROR BIT(12)
+#define SW_IBA_CMD_ERROR BIT(11)
+#define SW_IBA_CMD_LOC_M (BIT(6) - 1)
+
+#define REG_SW_IBA_STATES__4 0x0114
+
+#define SW_IBA_BUF_STATE_S 30
+#define SW_IBA_CMD_STATE_S 28
+#define SW_IBA_RESP_STATE_S 26
+#define SW_IBA_STATE_M 0x3
+#define SW_IBA_PACKET_SIZE_M 0x7F
+#define SW_IBA_PACKET_SIZE_S 16
+#define SW_IBA_FMT_ID_M 0xFFFF
+
+#define REG_SW_IBA_RESULT__4 0x0118
+
+#define SW_IBA_SIZE_S 24
+
+#define SW_IBA_RETRY_CNT_M (BIT(5) - 1)
+
+/* 2 - PHY */
+#define REG_SW_POWER_MANAGEMENT_CTRL 0x0201
+
+#define SW_PLL_POWER_DOWN BIT(5)
+#define SW_POWER_DOWN_MODE 0x3
+#define SW_ENERGY_DETECTION 1
+#define SW_SOFT_POWER_DOWN 2
+#define SW_POWER_SAVING 3
+
+/* 3 - Operation Control */
+#define REG_SW_OPERATION 0x0300
+
+#define SW_DOUBLE_TAG BIT(7)
+#define SW_RESET BIT(1)
+#define SW_START BIT(0)
+
+#define REG_SW_MAC_ADDR_0 0x0302
+#define REG_SW_MAC_ADDR_1 0x0303
+#define REG_SW_MAC_ADDR_2 0x0304
+#define REG_SW_MAC_ADDR_3 0x0305
+#define REG_SW_MAC_ADDR_4 0x0306
+#define REG_SW_MAC_ADDR_5 0x0307
+
+#define REG_SW_MTU__2 0x0308
+
+#define REG_SW_ISP_TPID__2 0x030A
+
+#define REG_SW_HSR_TPID__2 0x030C
+
+#define REG_AVB_STRATEGY__2 0x030E
+
+#define SW_SHAPING_CREDIT_ACCT BIT(1)
+#define SW_POLICING_CREDIT_ACCT BIT(0)
+
+#define REG_SW_LUE_CTRL_0 0x0310
+
+#define SW_VLAN_ENABLE BIT(7)
+#define SW_DROP_INVALID_VID BIT(6)
+#define SW_AGE_CNT_M 0x7
+#define SW_AGE_CNT_S 3
+#define SW_RESV_MCAST_ENABLE BIT(2)
+#define SW_HASH_OPTION_M 0x03
+#define SW_HASH_OPTION_CRC 1
+#define SW_HASH_OPTION_XOR 2
+#define SW_HASH_OPTION_DIRECT 3
+
+#define REG_SW_LUE_CTRL_1 0x0311
+
+#define UNICAST_LEARN_DISABLE BIT(7)
+#define SW_SRC_ADDR_FILTER BIT(6)
+#define SW_FLUSH_STP_TABLE BIT(5)
+#define SW_FLUSH_MSTP_TABLE BIT(4)
+#define SW_FWD_MCAST_SRC_ADDR BIT(3)
+#define SW_AGING_ENABLE BIT(2)
+#define SW_FAST_AGING BIT(1)
+#define SW_LINK_AUTO_AGING BIT(0)
+
+#define REG_SW_LUE_CTRL_2 0x0312
+
+#define SW_TRAP_DOUBLE_TAG BIT(6)
+#define SW_EGRESS_VLAN_FILTER_DYN BIT(5)
+#define SW_EGRESS_VLAN_FILTER_STA BIT(4)
+#define SW_FLUSH_OPTION_M 0x3
+#define SW_FLUSH_OPTION_S 2
+#define SW_FLUSH_OPTION_DYN_MAC 1
+#define SW_FLUSH_OPTION_STA_MAC 2
+#define SW_FLUSH_OPTION_BOTH 3
+#define SW_PRIO_M 0x3
+#define SW_PRIO_DA 0
+#define SW_PRIO_SA 1
+#define SW_PRIO_HIGHEST_DA_SA 2
+#define SW_PRIO_LOWEST_DA_SA 3
+
+#define REG_SW_LUE_CTRL_3 0x0313
+
+#define REG_SW_LUE_INT_STATUS 0x0314
+#define REG_SW_LUE_INT_ENABLE 0x0315
+
+#define LEARN_FAIL_INT BIT(2)
+#define ALMOST_FULL_INT BIT(1)
+#define WRITE_FAIL_INT BIT(0)
+
+#define REG_SW_LUE_INDEX_0__2 0x0316
+
+#define ENTRY_INDEX_M 0x0FFF
+
+#define REG_SW_LUE_INDEX_1__2 0x0318
+
+#define FAIL_INDEX_M 0x03FF
+
+#define REG_SW_LUE_INDEX_2__2 0x031A
+
+#define REG_SW_LUE_UNK_UCAST_CTRL__4 0x0320
+
+#define SW_UNK_UCAST_ENABLE BIT(31)
+
+#define REG_SW_LUE_UNK_MCAST_CTRL__4 0x0324
+
+#define SW_UNK_MCAST_ENABLE BIT(31)
+
+#define REG_SW_LUE_UNK_VID_CTRL__4 0x0328
+
+#define SW_UNK_VID_ENABLE BIT(31)
+
+#define REG_SW_MAC_CTRL_0 0x0330
+
+#define SW_NEW_BACKOFF BIT(7)
+#define SW_CHECK_LENGTH BIT(3)
+#define SW_PAUSE_UNH_MODE BIT(1)
+#define SW_AGGR_BACKOFF BIT(0)
+
+#define REG_SW_MAC_CTRL_1 0x0331
+
+#define MULTICAST_STORM_DISABLE BIT(6)
+#define SW_BACK_PRESSURE BIT(5)
+#define FAIR_FLOW_CTRL BIT(4)
+#define NO_EXC_COLLISION_DROP BIT(3)
+#define SW_JUMBO_PACKET BIT(2)
+#define SW_LEGAL_PACKET_DISABLE BIT(1)
+#define SW_PASS_SHORT_FRAME BIT(0)
+
+#define REG_SW_MAC_CTRL_2 0x0332
+
+#define SW_REPLACE_VID BIT(3)
+#define BROADCAST_STORM_RATE_HI 0x07
+
+#define REG_SW_MAC_CTRL_3 0x0333
+
+#define BROADCAST_STORM_RATE_LO 0xFF
+#define BROADCAST_STORM_RATE 0x07FF
+
+#define REG_SW_MAC_CTRL_4 0x0334
+
+#define SW_PASS_PAUSE BIT(3)
+
+#define REG_SW_MAC_CTRL_5 0x0335
+
+#define SW_OUT_RATE_LIMIT_QUEUE_BASED BIT(3)
+
+#define REG_SW_MAC_CTRL_6 0x0336
+
+#define SW_MIB_COUNTER_FLUSH BIT(7)
+#define SW_MIB_COUNTER_FREEZE BIT(6)
+
+#define REG_SW_MAC_802_1P_MAP_0 0x0338
+#define REG_SW_MAC_802_1P_MAP_1 0x0339
+#define REG_SW_MAC_802_1P_MAP_2 0x033A
+#define REG_SW_MAC_802_1P_MAP_3 0x033B
+
+#define SW_802_1P_MAP_M KS_PRIO_M
+#define SW_802_1P_MAP_S KS_PRIO_S
+
+#define REG_SW_MAC_ISP_CTRL 0x033C
+
+#define REG_SW_MAC_TOS_CTRL 0x033E
+
+#define SW_TOS_DSCP_REMARK BIT(1)
+#define SW_TOS_DSCP_REMAP BIT(0)
+
+#define REG_SW_MAC_TOS_PRIO_0 0x0340
+#define REG_SW_MAC_TOS_PRIO_1 0x0341
+#define REG_SW_MAC_TOS_PRIO_2 0x0342
+#define REG_SW_MAC_TOS_PRIO_3 0x0343
+#define REG_SW_MAC_TOS_PRIO_4 0x0344
+#define REG_SW_MAC_TOS_PRIO_5 0x0345
+#define REG_SW_MAC_TOS_PRIO_6 0x0346
+#define REG_SW_MAC_TOS_PRIO_7 0x0347
+#define REG_SW_MAC_TOS_PRIO_8 0x0348
+#define REG_SW_MAC_TOS_PRIO_9 0x0349
+#define REG_SW_MAC_TOS_PRIO_10 0x034A
+#define REG_SW_MAC_TOS_PRIO_11 0x034B
+#define REG_SW_MAC_TOS_PRIO_12 0x034C
+#define REG_SW_MAC_TOS_PRIO_13 0x034D
+#define REG_SW_MAC_TOS_PRIO_14 0x034E
+#define REG_SW_MAC_TOS_PRIO_15 0x034F
+#define REG_SW_MAC_TOS_PRIO_16 0x0350
+#define REG_SW_MAC_TOS_PRIO_17 0x0351
+#define REG_SW_MAC_TOS_PRIO_18 0x0352
+#define REG_SW_MAC_TOS_PRIO_19 0x0353
+#define REG_SW_MAC_TOS_PRIO_20 0x0354
+#define REG_SW_MAC_TOS_PRIO_21 0x0355
+#define REG_SW_MAC_TOS_PRIO_22 0x0356
+#define REG_SW_MAC_TOS_PRIO_23 0x0357
+#define REG_SW_MAC_TOS_PRIO_24 0x0358
+#define REG_SW_MAC_TOS_PRIO_25 0x0359
+#define REG_SW_MAC_TOS_PRIO_26 0x035A
+#define REG_SW_MAC_TOS_PRIO_27 0x035B
+#define REG_SW_MAC_TOS_PRIO_28 0x035C
+#define REG_SW_MAC_TOS_PRIO_29 0x035D
+#define REG_SW_MAC_TOS_PRIO_30 0x035E
+#define REG_SW_MAC_TOS_PRIO_31 0x035F
+
+#define REG_SW_MRI_CTRL_0 0x0370
+
+#define SW_IGMP_SNOOP BIT(6)
+#define SW_IPV6_MLD_OPTION BIT(3)
+#define SW_IPV6_MLD_SNOOP BIT(2)
+#define SW_MIRROR_RX_TX BIT(0)
+
+#define REG_SW_CLASS_D_IP_CTRL__4 0x0374
+
+#define SW_CLASS_D_IP_ENABLE BIT(31)
+
+#define REG_SW_MRI_CTRL_8 0x0378
+
+#define SW_NO_COLOR_S 6
+#define SW_RED_COLOR_S 4
+#define SW_YELLOW_COLOR_S 2
+#define SW_GREEN_COLOR_S 0
+#define SW_COLOR_M 0x3
+
+#define REG_SW_QM_CTRL__4 0x0390
+
+#define PRIO_SCHEME_SELECT_M KS_PRIO_M
+#define PRIO_SCHEME_SELECT_S 6
+#define PRIO_MAP_3_HI 0
+#define PRIO_MAP_2_HI 2
+#define PRIO_MAP_0_LO 3
+#define UNICAST_VLAN_BOUNDARY BIT(1)
+
+#define REG_SW_EEE_QM_CTRL__2 0x03C0
+
+#define REG_SW_EEE_TXQ_WAIT_TIME__2 0x03C2
+
+/* 4 - */
+#define REG_SW_VLAN_ENTRY__4 0x0400
+
+#define VLAN_VALID BIT(31)
+#define VLAN_FORWARD_OPTION BIT(27)
+#define VLAN_PRIO_M KS_PRIO_M
+#define VLAN_PRIO_S 24
+#define VLAN_MSTP_M 0x7
+#define VLAN_MSTP_S 12
+#define VLAN_FID_M 0x7F
+
+#define REG_SW_VLAN_ENTRY_UNTAG__4 0x0404
+#define REG_SW_VLAN_ENTRY_PORTS__4 0x0408
+
+#define REG_SW_VLAN_ENTRY_INDEX__2 0x040C
+
+#define VLAN_INDEX_M 0x0FFF
+
+#define REG_SW_VLAN_CTRL 0x040E
+
+#define VLAN_START BIT(7)
+#define VLAN_ACTION 0x3
+#define VLAN_WRITE 1
+#define VLAN_READ 2
+#define VLAN_CLEAR 3
+
+#define REG_SW_ALU_INDEX_0 0x0410
+
+#define ALU_FID_INDEX_S 16
+#define ALU_MAC_ADDR_HI 0xFFFF
+
+#define REG_SW_ALU_INDEX_1 0x0414
+
+#define ALU_DIRECT_INDEX_M (BIT(12) - 1)
+
+#define REG_SW_ALU_CTRL__4 0x0418
+
+#define ALU_VALID_CNT_M (BIT(14) - 1)
+#define ALU_VALID_CNT_S 16
+#define ALU_START BIT(7)
+#define ALU_VALID BIT(6)
+#define ALU_DIRECT BIT(2)
+#define ALU_ACTION 0x3
+#define ALU_WRITE 1
+#define ALU_READ 2
+#define ALU_SEARCH 3
+
+#define REG_SW_ALU_STAT_CTRL__4 0x041C
+
+#define ALU_STAT_INDEX_M (BIT(4) - 1)
+#define ALU_STAT_INDEX_S 16
+#define ALU_RESV_MCAST_INDEX_M (BIT(6) - 1)
+#define ALU_STAT_START BIT(7)
+#define ALU_RESV_MCAST_ADDR BIT(1)
+#define ALU_STAT_READ BIT(0)
+
+#define REG_SW_ALU_VAL_A 0x0420
+
+#define ALU_V_STATIC_VALID BIT(31)
+#define ALU_V_SRC_FILTER BIT(30)
+#define ALU_V_DST_FILTER BIT(29)
+#define ALU_V_PRIO_AGE_CNT_M (BIT(3) - 1)
+#define ALU_V_PRIO_AGE_CNT_S 26
+#define ALU_V_MSTP_M 0x7
+
+#define REG_SW_ALU_VAL_B 0x0424
+
+#define ALU_V_OVERRIDE BIT(31)
+#define ALU_V_USE_FID BIT(30)
+#define ALU_V_PORT_MAP (BIT(24) - 1)
+
+#define REG_SW_ALU_VAL_C 0x0428
+
+#define ALU_V_FID_M (BIT(16) - 1)
+#define ALU_V_FID_S 16
+#define ALU_V_MAC_ADDR_HI 0xFFFF
+
+#define REG_SW_ALU_VAL_D 0x042C
+
+#define REG_HSR_ALU_INDEX_0 0x0440
+
+#define REG_HSR_ALU_INDEX_1 0x0444
+
+#define HSR_DST_MAC_INDEX_LO_S 16
+#define HSR_SRC_MAC_INDEX_HI 0xFFFF
+
+#define REG_HSR_ALU_INDEX_2 0x0448
+
+#define HSR_INDEX_MAX BIT(9)
+#define HSR_DIRECT_INDEX_M (HSR_INDEX_MAX - 1)
+
+#define REG_HSR_ALU_INDEX_3 0x044C
+
+#define HSR_PATH_INDEX_M (BIT(4) - 1)
+
+#define REG_HSR_ALU_CTRL__4 0x0450
+
+#define HSR_VALID_CNT_M (BIT(14) - 1)
+#define HSR_VALID_CNT_S 16
+#define HSR_START BIT(7)
+#define HSR_VALID BIT(6)
+#define HSR_SEARCH_END BIT(5)
+#define HSR_DIRECT BIT(2)
+#define HSR_ACTION 0x3
+#define HSR_WRITE 1
+#define HSR_READ 2
+#define HSR_SEARCH 3
+
+#define REG_HSR_ALU_VAL_A 0x0454
+
+#define HSR_V_STATIC_VALID BIT(31)
+#define HSR_V_AGE_CNT_M (BIT(3) - 1)
+#define HSR_V_AGE_CNT_S 26
+#define HSR_V_PATH_ID_M (BIT(4) - 1)
+
+#define REG_HSR_ALU_VAL_B 0x0458
+
+#define REG_HSR_ALU_VAL_C 0x045C
+
+#define HSR_V_DST_MAC_ADDR_LO_S 16
+#define HSR_V_SRC_MAC_ADDR_HI 0xFFFF
+
+#define REG_HSR_ALU_VAL_D 0x0460
+
+#define REG_HSR_ALU_VAL_E 0x0464
+
+#define HSR_V_START_SEQ_1_S 16
+#define HSR_V_START_SEQ_2_S 0
+
+#define REG_HSR_ALU_VAL_F 0x0468
+
+#define HSR_V_EXP_SEQ_1_S 16
+#define HSR_V_EXP_SEQ_2_S 0
+
+#define REG_HSR_ALU_VAL_G 0x046C
+
+#define HSR_V_SEQ_CNT_1_S 16
+#define HSR_V_SEQ_CNT_2_S 0
+
+#define HSR_V_SEQ_M (BIT(16) - 1)
+
+/* 5 - PTP Clock */
+#define REG_PTP_CLK_CTRL 0x0500
+
+#define PTP_STEP_ADJ BIT(6)
+#define PTP_STEP_DIR BIT(5)
+#define PTP_READ_TIME BIT(4)
+#define PTP_LOAD_TIME BIT(3)
+#define PTP_CLK_ADJ_ENABLE BIT(2)
+#define PTP_CLK_ENABLE BIT(1)
+#define PTP_CLK_RESET BIT(0)
+
+#define REG_PTP_RTC_SUB_NANOSEC__2 0x0502
+
+#define PTP_RTC_SUB_NANOSEC_M 0x0007
+
+#define REG_PTP_RTC_NANOSEC 0x0504
+#define REG_PTP_RTC_NANOSEC_H 0x0504
+#define REG_PTP_RTC_NANOSEC_L 0x0506
+
+#define REG_PTP_RTC_SEC 0x0508
+#define REG_PTP_RTC_SEC_H 0x0508
+#define REG_PTP_RTC_SEC_L 0x050A
+
+#define REG_PTP_SUBNANOSEC_RATE 0x050C
+#define REG_PTP_SUBNANOSEC_RATE_H 0x050C
+
+#define PTP_RATE_DIR BIT(31)
+#define PTP_TMP_RATE_ENABLE BIT(30)
+
+#define REG_PTP_SUBNANOSEC_RATE_L 0x050E
+
+#define REG_PTP_RATE_DURATION 0x0510
+#define REG_PTP_RATE_DURATION_H 0x0510
+#define REG_PTP_RATE_DURATION_L 0x0512
+
+#define REG_PTP_MSG_CONF1 0x0514
+
+#define PTP_802_1AS BIT(7)
+#define PTP_ENABLE BIT(6)
+#define PTP_ETH_ENABLE BIT(5)
+#define PTP_IPV4_UDP_ENABLE BIT(4)
+#define PTP_IPV6_UDP_ENABLE BIT(3)
+#define PTP_TC_P2P BIT(2)
+#define PTP_MASTER BIT(1)
+#define PTP_1STEP BIT(0)
+
+#define REG_PTP_MSG_CONF2 0x0516
+
+#define PTP_UNICAST_ENABLE BIT(12)
+#define PTP_ALTERNATE_MASTER BIT(11)
+#define PTP_ALL_HIGH_PRIO BIT(10)
+#define PTP_SYNC_CHECK BIT(9)
+#define PTP_DELAY_CHECK BIT(8)
+#define PTP_PDELAY_CHECK BIT(7)
+#define PTP_DROP_SYNC_DELAY_REQ BIT(5)
+#define PTP_DOMAIN_CHECK BIT(4)
+#define PTP_UDP_CHECKSUM BIT(2)
+
+#define REG_PTP_DOMAIN_VERSION 0x0518
+#define PTP_VERSION_M 0xFF00
+#define PTP_DOMAIN_M 0x00FF
+
+#define REG_PTP_UNIT_INDEX__4 0x0520
+
+#define PTP_UNIT_M 0xF
+
+#define PTP_GPIO_INDEX_S 16
+#define PTP_TSI_INDEX_S 8
+#define PTP_TOU_INDEX_S 0
+
+#define REG_PTP_TRIG_STATUS__4 0x0524
+
+#define TRIG_ERROR_S 16
+#define TRIG_DONE_S 0
+
+#define REG_PTP_INT_STATUS__4 0x0528
+
+#define TRIG_INT_S 16
+#define TS_INT_S 0
+
+#define TRIG_UNIT_M 0x7
+#define TS_UNIT_M 0x3
+
+#define REG_PTP_CTRL_STAT__4 0x052C
+
+#define GPIO_IN BIT(7)
+#define GPIO_OUT BIT(6)
+#define TS_INT_ENABLE BIT(5)
+#define TRIG_ACTIVE BIT(4)
+#define TRIG_ENABLE BIT(3)
+#define TRIG_RESET BIT(2)
+#define TS_ENABLE BIT(1)
+#define TS_RESET BIT(0)
+
+#define GPIO_CTRL_M (GPIO_IN | GPIO_OUT)
+
+#define TRIG_CTRL_M \
+ (TRIG_ACTIVE | TRIG_ENABLE | TRIG_RESET)
+
+#define TS_CTRL_M \
+ (TS_INT_ENABLE | TS_ENABLE | TS_RESET)
+
+#define REG_TRIG_TARGET_NANOSEC 0x0530
+#define REG_TRIG_TARGET_SEC 0x0534
+
+#define REG_TRIG_CTRL__4 0x0538
+
+#define TRIG_CASCADE_ENABLE BIT(31)
+#define TRIG_CASCADE_TAIL BIT(30)
+#define TRIG_CASCADE_UPS_M 0xF
+#define TRIG_CASCADE_UPS_S 26
+#define TRIG_NOW BIT(25)
+#define TRIG_NOTIFY BIT(24)
+#define TRIG_EDGE BIT(23)
+#define TRIG_PATTERN_S 20
+#define TRIG_PATTERN_M 0x7
+#define TRIG_NEG_EDGE 0
+#define TRIG_POS_EDGE 1
+#define TRIG_NEG_PULSE 2
+#define TRIG_POS_PULSE 3
+#define TRIG_NEG_PERIOD 4
+#define TRIG_POS_PERIOD 5
+#define TRIG_REG_OUTPUT 6
+#define TRIG_GPO_S 16
+#define TRIG_GPO_M 0xF
+#define TRIG_CASCADE_ITERATE_CNT_M 0xFFFF
+
+#define REG_TRIG_CYCLE_WIDTH 0x053C
+
+#define REG_TRIG_CYCLE_CNT 0x0540
+
+#define TRIG_CYCLE_CNT_M 0xFFFF
+#define TRIG_CYCLE_CNT_S 16
+#define TRIG_BIT_PATTERN_M 0xFFFF
+
+#define REG_TRIG_ITERATE_TIME 0x0544
+
+#define REG_TRIG_PULSE_WIDTH__4 0x0548
+
+#define TRIG_PULSE_WIDTH_M 0x00FFFFFF
+
+#define REG_TS_CTRL_STAT__4 0x0550
+
+#define TS_EVENT_DETECT_M 0xF
+#define TS_EVENT_DETECT_S 17
+#define TS_EVENT_OVERFLOW BIT(16)
+#define TS_GPI_M 0xF
+#define TS_GPI_S 8
+#define TS_DETECT_RISE BIT(7)
+#define TS_DETECT_FALL BIT(6)
+#define TS_DETECT_S 6
+#define TS_CASCADE_TAIL BIT(5)
+#define TS_CASCADE_UPS_M 0xF
+#define TS_CASCADE_UPS_S 1
+#define TS_CASCADE_ENABLE BIT(0)
+
+#define DETECT_RISE (TS_DETECT_RISE >> TS_DETECT_S)
+#define DETECT_FALL (TS_DETECT_FALL >> TS_DETECT_S)
+
+#define REG_TS_EVENT_0_NANOSEC 0x0554
+#define REG_TS_EVENT_0_SEC 0x0558
+#define REG_TS_EVENT_0_SUB_NANOSEC 0x055C
+
+#define REG_TS_EVENT_1_NANOSEC 0x0560
+#define REG_TS_EVENT_1_SEC 0x0564
+#define REG_TS_EVENT_1_SUB_NANOSEC 0x0568
+
+#define REG_TS_EVENT_2_NANOSEC 0x056C
+#define REG_TS_EVENT_2_SEC 0x0570
+#define REG_TS_EVENT_2_SUB_NANOSEC 0x0574
+
+#define REG_TS_EVENT_3_NANOSEC 0x0578
+#define REG_TS_EVENT_3_SEC 0x057C
+#define REG_TS_EVENT_3_SUB_NANOSEC 0x0580
+
+#define REG_TS_EVENT_4_NANOSEC 0x0584
+#define REG_TS_EVENT_4_SEC 0x0588
+#define REG_TS_EVENT_4_SUB_NANOSEC 0x058C
+
+#define REG_TS_EVENT_5_NANOSEC 0x0590
+#define REG_TS_EVENT_5_SEC 0x0594
+#define REG_TS_EVENT_5_SUB_NANOSEC 0x0598
+
+#define REG_TS_EVENT_6_NANOSEC 0x059C
+#define REG_TS_EVENT_6_SEC 0x05A0
+#define REG_TS_EVENT_6_SUB_NANOSEC 0x05A4
+
+#define REG_TS_EVENT_7_NANOSEC 0x05A8
+#define REG_TS_EVENT_7_SEC 0x05AC
+#define REG_TS_EVENT_7_SUB_NANOSEC 0x05B0
+
+#define TS_EVENT_EDGE_M 0x1
+#define TS_EVENT_EDGE_S 30
+#define TS_EVENT_NANOSEC_M (BIT(30) - 1)
+
+#define TS_EVENT_SUB_NANOSEC_M 0x7
+
+#define TS_EVENT_SAMPLE \
+ (REG_TS_EVENT_1_NANOSEC - REG_TS_EVENT_0_NANOSEC)
+
+#define PORT_CTRL_ADDR(port, addr) ((addr) | (((port) + 1) << 12))
+
+#define REG_GLOBAL_RR_INDEX__1 0x0600
+
+/* DLR */
+#define REG_DLR_SRC_PORT__4 0x0604
+
+#define DLR_SRC_PORT_UNICAST BIT(31)
+#define DLR_SRC_PORT_M 0x3
+#define DLR_SRC_PORT_BOTH 0
+#define DLR_SRC_PORT_EACH 1
+
+#define REG_DLR_IP_ADDR__4 0x0608
+
+#define REG_DLR_CTRL__1 0x0610
+
+#define DLR_RESET_SEQ_ID BIT(3)
+#define DLR_BACKUP_AUTO_ON BIT(2)
+#define DLR_BEACON_TX_ENABLE BIT(1)
+#define DLR_ASSIST_ENABLE BIT(0)
+
+#define REG_DLR_STATE__1 0x0611
+
+#define DLR_NODE_STATE_M 0x3
+#define DLR_NODE_STATE_S 1
+#define DLR_NODE_STATE_IDLE 0
+#define DLR_NODE_STATE_FAULT 1
+#define DLR_NODE_STATE_NORMAL 2
+#define DLR_RING_STATE_FAULT 0
+#define DLR_RING_STATE_NORMAL 1
+
+#define REG_DLR_PRECEDENCE__1 0x0612
+
+#define REG_DLR_BEACON_INTERVAL__4 0x0614
+
+#define REG_DLR_BEACON_TIMEOUT__4 0x0618
+
+#define REG_DLR_TIMEOUT_WINDOW__4 0x061C
+
+#define DLR_TIMEOUT_WINDOW_M (BIT(22) - 1)
+
+#define REG_DLR_VLAN_ID__2 0x0620
+
+#define DLR_VLAN_ID_M (BIT(12) - 1)
+
+#define REG_DLR_DEST_ADDR_0 0x0622
+#define REG_DLR_DEST_ADDR_1 0x0623
+#define REG_DLR_DEST_ADDR_2 0x0624
+#define REG_DLR_DEST_ADDR_3 0x0625
+#define REG_DLR_DEST_ADDR_4 0x0626
+#define REG_DLR_DEST_ADDR_5 0x0627
+
+#define REG_DLR_PORT_MAP__4 0x0628
+
+#define REG_DLR_CLASS__1 0x062C
+
+#define DLR_FRAME_QID_M 0x3
+
+/* HSR */
+#define REG_HSR_PORT_MAP__4 0x0640
+
+#define REG_HSR_ALU_CTRL_0__1 0x0644
+
+#define HSR_DUPLICATE_DISCARD BIT(7)
+#define HSR_NODE_UNICAST BIT(6)
+#define HSR_AGE_CNT_DEFAULT_M 0x7
+#define HSR_AGE_CNT_DEFAULT_S 3
+#define HSR_LEARN_MCAST_DISABLE BIT(2)
+#define HSR_HASH_OPTION_M 0x3
+#define HSR_HASH_DISABLE 0
+#define HSR_HASH_UPPER_BITS 1
+#define HSR_HASH_LOWER_BITS 2
+#define HSR_HASH_XOR_BOTH_BITS 3
+
+#define REG_HSR_ALU_CTRL_1__1 0x0645
+
+#define HSR_LEARN_UCAST_DISABLE BIT(7)
+#define HSR_FLUSH_TABLE BIT(5)
+#define HSR_PROC_MCAST_SRC BIT(3)
+#define HSR_AGING_ENABLE BIT(2)
+
+#define REG_HSR_ALU_CTRL_2__2 0x0646
+
+#define REG_HSR_ALU_AGE_PERIOD__4 0x0648
+
+#define REG_HSR_ALU_INT_STATUS__1 0x064C
+#define REG_HSR_ALU_INT_MASK__1 0x064D
+
+#define HSR_WINDOW_OVERFLOW_INT BIT(3)
+#define HSR_LEARN_FAIL_INT BIT(2)
+#define HSR_ALMOST_FULL_INT BIT(1)
+#define HSR_WRITE_FAIL_INT BIT(0)
+
+#define REG_HSR_ALU_ENTRY_0__2 0x0650
+
+#define HSR_ENTRY_INDEX_M (BIT(10) - 1)
+#define HSR_FAIL_INDEX_M (BIT(8) - 1)
+
+#define REG_HSR_ALU_ENTRY_1__2 0x0652
+
+#define HSR_FAIL_LEARN_INDEX_M (BIT(8) - 1)
+
+#define REG_HSR_ALU_ENTRY_3__2 0x0654
+
+#define HSR_CPU_ACCESS_ENTRY_INDEX_M (BIT(8) - 1)
+
+/* 0 - Operation */
+#define REG_PORT_DEFAULT_VID 0x0000
+
+#define REG_PORT_CUSTOM_VID 0x0002
+#define REG_PORT_AVB_SR_1_VID 0x0004
+#define REG_PORT_AVB_SR_2_VID 0x0006
+
+#define REG_PORT_AVB_SR_1_TYPE 0x0008
+#define REG_PORT_AVB_SR_2_TYPE 0x000A
+
+#define REG_PORT_PME_STATUS 0x0013
+#define REG_PORT_PME_CTRL 0x0017
+
+#define PME_WOL_MAGICPKT BIT(2)
+#define PME_WOL_LINKUP BIT(1)
+#define PME_WOL_ENERGY BIT(0)
+
+#define REG_PORT_INT_STATUS 0x001B
+#define REG_PORT_INT_MASK 0x001F
+
+#define PORT_SGMII_INT BIT(3)
+#define PORT_PTP_INT BIT(2)
+#define PORT_PHY_INT BIT(1)
+#define PORT_ACL_INT BIT(0)
+
+#define PORT_INT_MASK \
+ (PORT_SGMII_INT | PORT_PTP_INT | PORT_PHY_INT | PORT_ACL_INT)
+
+#define REG_PORT_CTRL_0 0x0020
+
+#define PORT_MAC_LOOPBACK BIT(7)
+#define PORT_FORCE_TX_FLOW_CTRL BIT(4)
+#define PORT_FORCE_RX_FLOW_CTRL BIT(3)
+#define PORT_TAIL_TAG_ENABLE BIT(2)
+#define PORT_QUEUE_SPLIT_ENABLE 0x3
+
+#define REG_PORT_CTRL_1 0x0021
+
+#define PORT_SRP_ENABLE 0x3
+
+#define REG_PORT_STATUS_0 0x0030
+
+#define PORT_INTF_SPEED_M 0x3
+#define PORT_INTF_SPEED_S 3
+#define PORT_INTF_FULL_DUPLEX BIT(2)
+#define PORT_TX_FLOW_CTRL BIT(1)
+#define PORT_RX_FLOW_CTRL BIT(0)
+
+#define REG_PORT_STATUS_1 0x0034
+
+/* 1 - PHY */
+#define REG_PORT_PHY_CTRL 0x0100
+
+#define PORT_PHY_RESET BIT(15)
+#define PORT_PHY_LOOPBACK BIT(14)
+#define PORT_SPEED_100MBIT BIT(13)
+#define PORT_AUTO_NEG_ENABLE BIT(12)
+#define PORT_POWER_DOWN BIT(11)
+#define PORT_ISOLATE BIT(10)
+#define PORT_AUTO_NEG_RESTART BIT(9)
+#define PORT_FULL_DUPLEX BIT(8)
+#define PORT_COLLISION_TEST BIT(7)
+#define PORT_SPEED_1000MBIT BIT(6)
+
+#define REG_PORT_PHY_STATUS 0x0102
+
+#define PORT_100BT4_CAPABLE BIT(15)
+#define PORT_100BTX_FD_CAPABLE BIT(14)
+#define PORT_100BTX_CAPABLE BIT(13)
+#define PORT_10BT_FD_CAPABLE BIT(12)
+#define PORT_10BT_CAPABLE BIT(11)
+#define PORT_EXTENDED_STATUS BIT(8)
+#define PORT_MII_SUPPRESS_CAPABLE BIT(6)
+#define PORT_AUTO_NEG_ACKNOWLEDGE BIT(5)
+#define PORT_REMOTE_FAULT BIT(4)
+#define PORT_AUTO_NEG_CAPABLE BIT(3)
+#define PORT_LINK_STATUS BIT(2)
+#define PORT_JABBER_DETECT BIT(1)
+#define PORT_EXTENDED_CAPABILITY BIT(0)
+
+#define REG_PORT_PHY_ID_HI 0x0104
+#define REG_PORT_PHY_ID_LO 0x0106
+
+#define KSZ9477_ID_HI 0x0022
+#define KSZ9477_ID_LO 0x1622
+
+#define REG_PORT_PHY_AUTO_NEGOTIATION 0x0108
+
+#define PORT_AUTO_NEG_NEXT_PAGE BIT(15)
+#define PORT_AUTO_NEG_REMOTE_FAULT BIT(13)
+#define PORT_AUTO_NEG_ASYM_PAUSE BIT(11)
+#define PORT_AUTO_NEG_SYM_PAUSE BIT(10)
+#define PORT_AUTO_NEG_100BT4 BIT(9)
+#define PORT_AUTO_NEG_100BTX_FD BIT(8)
+#define PORT_AUTO_NEG_100BTX BIT(7)
+#define PORT_AUTO_NEG_10BT_FD BIT(6)
+#define PORT_AUTO_NEG_10BT BIT(5)
+#define PORT_AUTO_NEG_SELECTOR 0x001F
+#define PORT_AUTO_NEG_802_3 0x0001
+
+#define PORT_AUTO_NEG_PAUSE \
+ (PORT_AUTO_NEG_ASYM_PAUSE | PORT_AUTO_NEG_SYM_PAUSE)
+
+#define REG_PORT_PHY_REMOTE_CAPABILITY 0x010A
+
+#define PORT_REMOTE_NEXT_PAGE BIT(15)
+#define PORT_REMOTE_ACKNOWLEDGE BIT(14)
+#define PORT_REMOTE_REMOTE_FAULT BIT(13)
+#define PORT_REMOTE_ASYM_PAUSE BIT(11)
+#define PORT_REMOTE_SYM_PAUSE BIT(10)
+#define PORT_REMOTE_100BTX_FD BIT(8)
+#define PORT_REMOTE_100BTX BIT(7)
+#define PORT_REMOTE_10BT_FD BIT(6)
+#define PORT_REMOTE_10BT BIT(5)
+
+#define REG_PORT_PHY_1000_CTRL 0x0112
+
+#define PORT_AUTO_NEG_MANUAL BIT(12)
+#define PORT_AUTO_NEG_MASTER BIT(11)
+#define PORT_AUTO_NEG_MASTER_PREFERRED BIT(10)
+#define PORT_AUTO_NEG_1000BT_FD BIT(9)
+#define PORT_AUTO_NEG_1000BT BIT(8)
+
+#define REG_PORT_PHY_1000_STATUS 0x0114
+
+#define PORT_MASTER_FAULT BIT(15)
+#define PORT_LOCAL_MASTER BIT(14)
+#define PORT_LOCAL_RX_OK BIT(13)
+#define PORT_REMOTE_RX_OK BIT(12)
+#define PORT_REMOTE_1000BT_FD BIT(11)
+#define PORT_REMOTE_1000BT BIT(10)
+#define PORT_REMOTE_IDLE_CNT_M 0x0F
+
+#define PORT_PHY_1000_STATIC_STATUS \
+ (PORT_LOCAL_RX_OK | \
+ PORT_REMOTE_RX_OK | \
+ PORT_REMOTE_1000BT_FD | \
+ PORT_REMOTE_1000BT)
+
+#define REG_PORT_PHY_MMD_SETUP 0x011A
+
+#define PORT_MMD_OP_MODE_M 0x3
+#define PORT_MMD_OP_MODE_S 14
+#define PORT_MMD_OP_INDEX 0
+#define PORT_MMD_OP_DATA_NO_INCR 1
+#define PORT_MMD_OP_DATA_INCR_RW 2
+#define PORT_MMD_OP_DATA_INCR_W 3
+#define PORT_MMD_DEVICE_ID_M 0x1F
+
+#define MMD_SETUP(mode, dev) \
+ (((u16)(mode) << PORT_MMD_OP_MODE_S) | (dev))
+
+#define REG_PORT_PHY_MMD_INDEX_DATA 0x011C
+
+#define MMD_DEVICE_ID_DSP 1
+
+#define MMD_DSP_SQI_CHAN_A 0xAC
+#define MMD_DSP_SQI_CHAN_B 0xAD
+#define MMD_DSP_SQI_CHAN_C 0xAE
+#define MMD_DSP_SQI_CHAN_D 0xAF
+
+#define DSP_SQI_ERR_DETECTED BIT(15)
+#define DSP_SQI_AVG_ERR 0x7FFF
+
+#define MMD_DEVICE_ID_COMMON 2
+
+#define MMD_DEVICE_ID_EEE_ADV 7
+
+#define MMD_EEE_ADV 0x3C
+#define EEE_ADV_100MBIT BIT(1)
+#define EEE_ADV_1GBIT BIT(2)
+
+#define MMD_EEE_LP_ADV 0x3D
+#define MMD_EEE_MSG_CODE 0x3F
+
+#define MMD_DEVICE_ID_AFED 0x1C
+
+#define REG_PORT_PHY_EXTENDED_STATUS 0x011E
+
+#define PORT_100BTX_FD_ABLE BIT(15)
+#define PORT_100BTX_ABLE BIT(14)
+#define PORT_10BT_FD_ABLE BIT(13)
+#define PORT_10BT_ABLE BIT(12)
+
+#define REG_PORT_SGMII_ADDR__4 0x0200
+#define PORT_SGMII_AUTO_INCR BIT(23)
+#define PORT_SGMII_DEVICE_ID_M 0x1F
+#define PORT_SGMII_DEVICE_ID_S 16
+#define PORT_SGMII_ADDR_M (BIT(21) - 1)
+
+#define REG_PORT_SGMII_DATA__4 0x0204
+#define PORT_SGMII_DATA_M (BIT(16) - 1)
+
+#define MMD_DEVICE_ID_PMA 0x01
+#define MMD_DEVICE_ID_PCS 0x03
+#define MMD_DEVICE_ID_PHY_XS 0x04
+#define MMD_DEVICE_ID_DTE_XS 0x05
+#define MMD_DEVICE_ID_AN 0x07
+#define MMD_DEVICE_ID_VENDOR_CTRL 0x1E
+#define MMD_DEVICE_ID_VENDOR_MII 0x1F
+
+#define SR_MII MMD_DEVICE_ID_VENDOR_MII
+
+#define MMD_SR_MII_CTRL 0x0000
+
+#define SR_MII_RESET BIT(15)
+#define SR_MII_LOOPBACK BIT(14)
+#define SR_MII_SPEED_100MBIT BIT(13)
+#define SR_MII_AUTO_NEG_ENABLE BIT(12)
+#define SR_MII_POWER_DOWN BIT(11)
+#define SR_MII_AUTO_NEG_RESTART BIT(9)
+#define SR_MII_FULL_DUPLEX BIT(8)
+#define SR_MII_SPEED_1000MBIT BIT(6)
+
+#define MMD_SR_MII_STATUS 0x0001
+#define MMD_SR_MII_ID_1 0x0002
+#define MMD_SR_MII_ID_2 0x0003
+#define MMD_SR_MII_AUTO_NEGOTIATION 0x0004
+
+#define SR_MII_AUTO_NEG_NEXT_PAGE BIT(15)
+#define SR_MII_AUTO_NEG_REMOTE_FAULT_M 0x3
+#define SR_MII_AUTO_NEG_REMOTE_FAULT_S 12
+#define SR_MII_AUTO_NEG_NO_ERROR 0
+#define SR_MII_AUTO_NEG_OFFLINE 1
+#define SR_MII_AUTO_NEG_LINK_FAILURE 2
+#define SR_MII_AUTO_NEG_ERROR 3
+#define SR_MII_AUTO_NEG_PAUSE_M 0x3
+#define SR_MII_AUTO_NEG_PAUSE_S 7
+#define SR_MII_AUTO_NEG_NO_PAUSE 0
+#define SR_MII_AUTO_NEG_ASYM_PAUSE_TX 1
+#define SR_MII_AUTO_NEG_SYM_PAUSE 2
+#define SR_MII_AUTO_NEG_ASYM_PAUSE_RX 3
+#define SR_MII_AUTO_NEG_HALF_DUPLEX BIT(6)
+#define SR_MII_AUTO_NEG_FULL_DUPLEX BIT(5)
+
+#define MMD_SR_MII_REMOTE_CAPABILITY 0x0005
+#define MMD_SR_MII_AUTO_NEG_EXP 0x0006
+#define MMD_SR_MII_AUTO_NEG_EXT 0x000F
+
+#define MMD_SR_MII_DIGITAL_CTRL_1 0x8000
+
+#define MMD_SR_MII_AUTO_NEG_CTRL 0x8001
+
+#define SR_MII_8_BIT BIT(8)
+#define SR_MII_SGMII_LINK_UP BIT(4)
+#define SR_MII_TX_CFG_PHY_MASTER BIT(3)
+#define SR_MII_PCS_MODE_M 0x3
+#define SR_MII_PCS_MODE_S 1
+#define SR_MII_PCS_SGMII 2
+#define SR_MII_AUTO_NEG_COMPLETE_INTR BIT(0)
+
+#define MMD_SR_MII_AUTO_NEG_STATUS 0x8002
+
+#define SR_MII_STAT_LINK_UP BIT(4)
+#define SR_MII_STAT_M 0x3
+#define SR_MII_STAT_S 2
+#define SR_MII_STAT_10_MBPS 0
+#define SR_MII_STAT_100_MBPS 1
+#define SR_MII_STAT_1000_MBPS 2
+#define SR_MII_STAT_FULL_DUPLEX BIT(1)
+
+#define MMD_SR_MII_PHY_CTRL 0x80A0
+
+#define SR_MII_PHY_LANE_SEL_M 0xF
+#define SR_MII_PHY_LANE_SEL_S 8
+#define SR_MII_PHY_WRITE BIT(1)
+#define SR_MII_PHY_START_BUSY BIT(0)
+
+#define MMD_SR_MII_PHY_ADDR 0x80A1
+
+#define SR_MII_PHY_ADDR_M (BIT(16) - 1)
+
+#define MMD_SR_MII_PHY_DATA 0x80A2
+
+#define SR_MII_PHY_DATA_M (BIT(16) - 1)
+
+#define SR_MII_PHY_JTAG_CHIP_ID_HI 0x000C
+#define SR_MII_PHY_JTAG_CHIP_ID_LO 0x000D
+
+#define REG_PORT_PHY_REMOTE_LB_LED 0x0122
+
+#define PORT_REMOTE_LOOPBACK BIT(8)
+#define PORT_LED_SELECT (3 << 6)
+#define PORT_LED_CTRL (3 << 4)
+#define PORT_LED_CTRL_TEST BIT(3)
+#define PORT_10BT_PREAMBLE BIT(2)
+#define PORT_LINK_MD_10BT_ENABLE BIT(1)
+#define PORT_LINK_MD_PASS BIT(0)
+
+#define REG_PORT_PHY_LINK_MD 0x0124
+
+#define PORT_START_CABLE_DIAG BIT(15)
+#define PORT_TX_DISABLE BIT(14)
+#define PORT_CABLE_DIAG_PAIR_M 0x3
+#define PORT_CABLE_DIAG_PAIR_S 12
+#define PORT_CABLE_DIAG_SELECT_M 0x3
+#define PORT_CABLE_DIAG_SELECT_S 10
+#define PORT_CABLE_DIAG_RESULT_M 0x3
+#define PORT_CABLE_DIAG_RESULT_S 8
+#define PORT_CABLE_STAT_NORMAL 0
+#define PORT_CABLE_STAT_OPEN 1
+#define PORT_CABLE_STAT_SHORT 2
+#define PORT_CABLE_STAT_FAILED 3
+#define PORT_CABLE_FAULT_COUNTER 0x00FF
+
+#define REG_PORT_PHY_PMA_STATUS 0x0126
+
+#define PORT_1000_LINK_GOOD BIT(1)
+#define PORT_100_LINK_GOOD BIT(0)
+
+#define REG_PORT_PHY_DIGITAL_STATUS 0x0128
+
+#define PORT_LINK_DETECT BIT(14)
+#define PORT_SIGNAL_DETECT BIT(13)
+#define PORT_PHY_STAT_MDI BIT(12)
+#define PORT_PHY_STAT_MASTER BIT(11)
+
+#define REG_PORT_PHY_RXER_COUNTER 0x012A
+
+#define REG_PORT_PHY_INT_ENABLE 0x0136
+#define REG_PORT_PHY_INT_STATUS 0x0137
+
+#define JABBER_INT BIT(7)
+#define RX_ERR_INT BIT(6)
+#define PAGE_RX_INT BIT(5)
+#define PARALLEL_DETECT_FAULT_INT BIT(4)
+#define LINK_PARTNER_ACK_INT BIT(3)
+#define LINK_DOWN_INT BIT(2)
+#define REMOTE_FAULT_INT BIT(1)
+#define LINK_UP_INT BIT(0)
+
+#define REG_PORT_PHY_DIGITAL_DEBUG_1 0x0138
+
+#define PORT_REG_CLK_SPEED_25_MHZ BIT(14)
+#define PORT_PHY_FORCE_MDI BIT(7)
+#define PORT_PHY_AUTO_MDIX_DISABLE BIT(6)
+
+/* Same as PORT_PHY_LOOPBACK */
+#define PORT_PHY_PCS_LOOPBACK BIT(0)
+
+#define REG_PORT_PHY_DIGITAL_DEBUG_2 0x013A
+
+#define REG_PORT_PHY_DIGITAL_DEBUG_3 0x013C
+
+#define PORT_100BT_FIXED_LATENCY BIT(15)
+
+#define REG_PORT_PHY_PHY_CTRL 0x013E
+
+#define PORT_INT_PIN_HIGH BIT(14)
+#define PORT_ENABLE_JABBER BIT(9)
+#define PORT_STAT_SPEED_1000MBIT BIT(6)
+#define PORT_STAT_SPEED_100MBIT BIT(5)
+#define PORT_STAT_SPEED_10MBIT BIT(4)
+#define PORT_STAT_FULL_DUPLEX BIT(3)
+
+/* Same as PORT_PHY_STAT_MASTER */
+#define PORT_STAT_MASTER BIT(2)
+#define PORT_RESET BIT(1)
+#define PORT_LINK_STATUS_FAIL BIT(0)
+
+/* 3 - xMII */
+#define REG_PORT_XMII_CTRL_0 0x0300
+
+#define PORT_SGMII_SEL BIT(7)
+#define PORT_MII_FULL_DUPLEX BIT(6)
+#define PORT_MII_100MBIT BIT(4)
+#define PORT_GRXC_ENABLE BIT(0)
+
+#define REG_PORT_XMII_CTRL_1 0x0301
+
+#define PORT_RMII_CLK_SEL BIT(7)
+/* S1 */
+#define PORT_MII_1000MBIT_S1 BIT(6)
+/* S2 */
+#define PORT_MII_NOT_1GBIT BIT(6)
+#define PORT_MII_SEL_EDGE BIT(5)
+#define PORT_RGMII_ID_IG_ENABLE BIT(4)
+#define PORT_RGMII_ID_EG_ENABLE BIT(3)
+#define PORT_MII_MAC_MODE BIT(2)
+#define PORT_MII_SEL_M 0x3
+/* S1 */
+#define PORT_MII_SEL_S1 0x0
+#define PORT_RMII_SEL_S1 0x1
+#define PORT_GMII_SEL_S1 0x2
+#define PORT_RGMII_SEL_S1 0x3
+/* S2 */
+#define PORT_RGMII_SEL 0x0
+#define PORT_RMII_SEL 0x1
+#define PORT_GMII_SEL 0x2
+#define PORT_MII_SEL 0x3
+
+/* 4 - MAC */
+#define REG_PORT_MAC_CTRL_0 0x0400
+
+#define PORT_BROADCAST_STORM BIT(1)
+#define PORT_JUMBO_FRAME BIT(0)
+
+#define REG_PORT_MAC_CTRL_1 0x0401
+
+#define PORT_BACK_PRESSURE BIT(3)
+#define PORT_PASS_ALL BIT(0)
+
+#define REG_PORT_MAC_CTRL_2 0x0402
+
+#define PORT_100BT_EEE_DISABLE BIT(7)
+#define PORT_1000BT_EEE_DISABLE BIT(6)
+
+#define REG_PORT_MAC_IN_RATE_LIMIT 0x0403
+
+#define PORT_IN_PORT_BASED_S 6
+#define PORT_RATE_PACKET_BASED_S 5
+#define PORT_IN_FLOW_CTRL_S 4
+#define PORT_COUNT_IFG_S 1
+#define PORT_COUNT_PREAMBLE_S 0
+#define PORT_IN_PORT_BASED BIT(6)
+#define PORT_IN_PACKET_BASED BIT(5)
+#define PORT_IN_FLOW_CTRL BIT(4)
+#define PORT_IN_LIMIT_MODE_M 0x3
+#define PORT_IN_LIMIT_MODE_S 2
+#define PORT_IN_ALL 0
+#define PORT_IN_UNICAST 1
+#define PORT_IN_MULTICAST 2
+#define PORT_IN_BROADCAST 3
+#define PORT_COUNT_IFG BIT(1)
+#define PORT_COUNT_PREAMBLE BIT(0)
+
+#define REG_PORT_IN_RATE_0 0x0410
+#define REG_PORT_IN_RATE_1 0x0411
+#define REG_PORT_IN_RATE_2 0x0412
+#define REG_PORT_IN_RATE_3 0x0413
+#define REG_PORT_IN_RATE_4 0x0414
+#define REG_PORT_IN_RATE_5 0x0415
+#define REG_PORT_IN_RATE_6 0x0416
+#define REG_PORT_IN_RATE_7 0x0417
+
+#define REG_PORT_OUT_RATE_0 0x0420
+#define REG_PORT_OUT_RATE_1 0x0421
+#define REG_PORT_OUT_RATE_2 0x0422
+#define REG_PORT_OUT_RATE_3 0x0423
+
+#define PORT_RATE_LIMIT_M (BIT(7) - 1)
+
+/* 5 - MIB Counters */
+#define REG_PORT_MIB_CTRL_STAT__4 0x0500
+
+#define MIB_COUNTER_OVERFLOW BIT(31)
+#define MIB_COUNTER_VALID BIT(30)
+#define MIB_COUNTER_READ BIT(25)
+#define MIB_COUNTER_FLUSH_FREEZE BIT(24)
+#define MIB_COUNTER_INDEX_M (BIT(8) - 1)
+#define MIB_COUNTER_INDEX_S 16
+#define MIB_COUNTER_DATA_HI_M 0xF
+
+#define REG_PORT_MIB_DATA 0x0504
+
+/* 6 - ACL */
+#define REG_PORT_ACL_0 0x0600
+
+#define ACL_FIRST_RULE_M 0xF
+
+#define REG_PORT_ACL_1 0x0601
+
+#define ACL_MODE_M 0x3
+#define ACL_MODE_S 4
+#define ACL_MODE_DISABLE 0
+#define ACL_MODE_LAYER_2 1
+#define ACL_MODE_LAYER_3 2
+#define ACL_MODE_LAYER_4 3
+#define ACL_ENABLE_M 0x3
+#define ACL_ENABLE_S 2
+#define ACL_ENABLE_2_COUNT 0
+#define ACL_ENABLE_2_TYPE 1
+#define ACL_ENABLE_2_MAC 2
+#define ACL_ENABLE_2_BOTH 3
+#define ACL_ENABLE_3_IP 1
+#define ACL_ENABLE_3_SRC_DST_COMP 2
+#define ACL_ENABLE_4_PROTOCOL 0
+#define ACL_ENABLE_4_TCP_PORT_COMP 1
+#define ACL_ENABLE_4_UDP_PORT_COMP 2
+#define ACL_ENABLE_4_TCP_SEQN_COMP 3
+#define ACL_SRC BIT(1)
+#define ACL_EQUAL BIT(0)
+
+#define REG_PORT_ACL_2 0x0602
+#define REG_PORT_ACL_3 0x0603
+
+#define ACL_MAX_PORT 0xFFFF
+
+#define REG_PORT_ACL_4 0x0604
+#define REG_PORT_ACL_5 0x0605
+
+#define ACL_MIN_PORT 0xFFFF
+#define ACL_IP_ADDR 0xFFFFFFFF
+#define ACL_TCP_SEQNUM 0xFFFFFFFF
+
+#define REG_PORT_ACL_6 0x0606
+
+#define ACL_RESERVED 0xF8
+#define ACL_PORT_MODE_M 0x3
+#define ACL_PORT_MODE_S 1
+#define ACL_PORT_MODE_DISABLE 0
+#define ACL_PORT_MODE_EITHER 1
+#define ACL_PORT_MODE_IN_RANGE 2
+#define ACL_PORT_MODE_OUT_OF_RANGE 3
+
+#define REG_PORT_ACL_7 0x0607
+
+#define ACL_TCP_FLAG_ENABLE BIT(0)
+
+#define REG_PORT_ACL_8 0x0608
+
+#define ACL_TCP_FLAG_M 0xFF
+
+#define REG_PORT_ACL_9 0x0609
+
+#define ACL_TCP_FLAG 0xFF
+#define ACL_ETH_TYPE 0xFFFF
+#define ACL_IP_M 0xFFFFFFFF
+
+#define REG_PORT_ACL_A 0x060A
+
+#define ACL_PRIO_MODE_M 0x3
+#define ACL_PRIO_MODE_S 6
+#define ACL_PRIO_MODE_DISABLE 0
+#define ACL_PRIO_MODE_HIGHER 1
+#define ACL_PRIO_MODE_LOWER 2
+#define ACL_PRIO_MODE_REPLACE 3
+#define ACL_PRIO_M KS_PRIO_M
+#define ACL_PRIO_S 3
+#define ACL_VLAN_PRIO_REPLACE BIT(2)
+#define ACL_VLAN_PRIO_M KS_PRIO_M
+#define ACL_VLAN_PRIO_HI_M 0x3
+
+#define REG_PORT_ACL_B 0x060B
+
+#define ACL_VLAN_PRIO_LO_M 0x8
+#define ACL_VLAN_PRIO_S 7
+#define ACL_MAP_MODE_M 0x3
+#define ACL_MAP_MODE_S 5
+#define ACL_MAP_MODE_DISABLE 0
+#define ACL_MAP_MODE_OR 1
+#define ACL_MAP_MODE_AND 2
+#define ACL_MAP_MODE_REPLACE 3
+
+#define ACL_CNT_M (BIT(11) - 1)
+#define ACL_CNT_S 5
+
+#define REG_PORT_ACL_C 0x060C
+
+#define REG_PORT_ACL_D 0x060D
+#define ACL_MSEC_UNIT BIT(6)
+#define ACL_INTR_MODE BIT(5)
+#define ACL_PORT_MAP 0x7F
+
+#define REG_PORT_ACL_E 0x060E
+#define REG_PORT_ACL_F 0x060F
+
+#define REG_PORT_ACL_BYTE_EN_MSB 0x0610
+#define REG_PORT_ACL_BYTE_EN_LSB 0x0611
+
+#define ACL_ACTION_START 0xA
+#define ACL_ACTION_LEN 4
+#define ACL_INTR_CNT_START 0xD
+#define ACL_RULESET_START 0xE
+#define ACL_RULESET_LEN 2
+#define ACL_TABLE_LEN 16
+
+#define ACL_ACTION_ENABLE 0x003C
+#define ACL_MATCH_ENABLE 0x7FC3
+#define ACL_RULESET_ENABLE 0x8003
+#define ACL_BYTE_ENABLE 0xFFFF
+
+#define REG_PORT_ACL_CTRL_0 0x0612
+
+#define PORT_ACL_WRITE_DONE BIT(6)
+#define PORT_ACL_READ_DONE BIT(5)
+#define PORT_ACL_WRITE BIT(4)
+#define PORT_ACL_INDEX_M 0xF
+
+#define REG_PORT_ACL_CTRL_1 0x0613
+
+/* 8 - Classification and Policing */
+#define REG_PORT_MRI_MIRROR_CTRL 0x0800
+
+#define PORT_MIRROR_RX BIT(6)
+#define PORT_MIRROR_TX BIT(5)
+#define PORT_MIRROR_SNIFFER BIT(1)
+
+#define REG_PORT_MRI_PRIO_CTRL 0x0801
+
+#define PORT_HIGHEST_PRIO BIT(7)
+#define PORT_OR_PRIO BIT(6)
+#define PORT_MAC_PRIO_ENABLE BIT(4)
+#define PORT_VLAN_PRIO_ENABLE BIT(3)
+#define PORT_802_1P_PRIO_ENABLE BIT(2)
+#define PORT_DIFFSERV_PRIO_ENABLE BIT(1)
+#define PORT_ACL_PRIO_ENABLE BIT(0)
+
+#define REG_PORT_MRI_MAC_CTRL 0x0802
+
+#define PORT_USER_PRIO_CEILING BIT(7)
+#define PORT_DROP_NON_VLAN BIT(4)
+#define PORT_DROP_TAG BIT(3)
+#define PORT_BASED_PRIO_M KS_PRIO_M
+#define PORT_BASED_PRIO_S 0
+
+#define REG_PORT_MRI_AUTHEN_CTRL 0x0803
+
+#define PORT_ACL_ENABLE BIT(2)
+#define PORT_AUTHEN_MODE 0x3
+#define PORT_AUTHEN_PASS 0
+#define PORT_AUTHEN_BLOCK 1
+#define PORT_AUTHEN_TRAP 2
+
+#define REG_PORT_MRI_INDEX__4 0x0804
+
+#define MRI_INDEX_P_M 0x7
+#define MRI_INDEX_P_S 16
+#define MRI_INDEX_Q_M 0x3
+#define MRI_INDEX_Q_S 0
+
+#define REG_PORT_MRI_TC_MAP__4 0x0808
+
+#define PORT_TC_MAP_M 0xf
+#define PORT_TC_MAP_S 4
+
+#define REG_PORT_MRI_POLICE_CTRL__4 0x080C
+
+#define POLICE_DROP_ALL BIT(10)
+#define POLICE_PACKET_TYPE_M 0x3
+#define POLICE_PACKET_TYPE_S 8
+#define POLICE_PACKET_DROPPED 0
+#define POLICE_PACKET_GREEN 1
+#define POLICE_PACKET_YELLOW 2
+#define POLICE_PACKET_RED 3
+#define PORT_BASED_POLICING BIT(7)
+#define NON_DSCP_COLOR_M 0x3
+#define NON_DSCP_COLOR_S 5
+#define COLOR_MARK_ENABLE BIT(4)
+#define COLOR_REMAP_ENABLE BIT(3)
+#define POLICE_DROP_SRP BIT(2)
+#define POLICE_COLOR_NOT_AWARE BIT(1)
+#define POLICE_ENABLE BIT(0)
+
+#define REG_PORT_POLICE_COLOR_0__4 0x0810
+#define REG_PORT_POLICE_COLOR_1__4 0x0814
+#define REG_PORT_POLICE_COLOR_2__4 0x0818
+#define REG_PORT_POLICE_COLOR_3__4 0x081C
+
+#define POLICE_COLOR_MAP_S 2
+#define POLICE_COLOR_MAP_M (BIT(POLICE_COLOR_MAP_S) - 1)
+
+#define REG_PORT_POLICE_RATE__4 0x0820
+
+#define POLICE_CIR_S 16
+#define POLICE_PIR_S 0
+
+#define REG_PORT_POLICE_BURST_SIZE__4 0x0824
+
+#define POLICE_BURST_SIZE_M 0x3FFF
+#define POLICE_CBS_S 16
+#define POLICE_PBS_S 0
+
+#define REG_PORT_WRED_PM_CTRL_0__4 0x0830
+
+#define WRED_PM_CTRL_M (BIT(11) - 1)
+
+#define WRED_PM_MAX_THRESHOLD_S 16
+#define WRED_PM_MIN_THRESHOLD_S 0
+
+#define REG_PORT_WRED_PM_CTRL_1__4 0x0834
+
+#define WRED_PM_MULTIPLIER_S 16
+#define WRED_PM_AVG_QUEUE_SIZE_S 0
+
+#define REG_PORT_WRED_QUEUE_CTRL_0__4 0x0840
+#define REG_PORT_WRED_QUEUE_CTRL_1__4 0x0844
+
+#define REG_PORT_WRED_QUEUE_PMON__4 0x0848
+
+#define WRED_RANDOM_DROP_ENABLE BIT(31)
+#define WRED_PMON_FLUSH BIT(30)
+#define WRED_DROP_GYR_DISABLE BIT(29)
+#define WRED_DROP_YR_DISABLE BIT(28)
+#define WRED_DROP_R_DISABLE BIT(27)
+#define WRED_DROP_ALL BIT(26)
+#define WRED_PMON_M (BIT(24) - 1)
+
+/* 9 - Shaping */
+
+#define REG_PORT_MTI_QUEUE_INDEX__4 0x0900
+
+#define REG_PORT_MTI_QUEUE_CTRL_0__4 0x0904
+
+#define MTI_PVID_REPLACE BIT(0)
+
+#define REG_PORT_MTI_QUEUE_CTRL_0 0x0914
+
+#define MTI_SCHEDULE_MODE_M 0x3
+#define MTI_SCHEDULE_MODE_S 6
+#define MTI_SCHEDULE_STRICT_PRIO 0
+#define MTI_SCHEDULE_WRR 2
+#define MTI_SHAPING_M 0x3
+#define MTI_SHAPING_S 4
+#define MTI_SHAPING_OFF 0
+#define MTI_SHAPING_SRP 1
+#define MTI_SHAPING_TIME_AWARE 2
+
+#define REG_PORT_MTI_QUEUE_CTRL_1 0x0915
+
+#define MTI_TX_RATIO_M (BIT(7) - 1)
+
+#define REG_PORT_MTI_QUEUE_CTRL_2__2 0x0916
+#define REG_PORT_MTI_HI_WATER_MARK 0x0916
+#define REG_PORT_MTI_QUEUE_CTRL_3__2 0x0918
+#define REG_PORT_MTI_LO_WATER_MARK 0x0918
+#define REG_PORT_MTI_QUEUE_CTRL_4__2 0x091A
+#define REG_PORT_MTI_CREDIT_INCREMENT 0x091A
+
+/* A - QM */
+
+#define REG_PORT_QM_CTRL__4 0x0A00
+
+#define PORT_QM_DROP_PRIO_M 0x3
+
+#define REG_PORT_VLAN_MEMBERSHIP__4 0x0A04
+
+#define REG_PORT_QM_QUEUE_INDEX__4 0x0A08
+
+#define PORT_QM_QUEUE_INDEX_S 24
+#define PORT_QM_BURST_SIZE_S 16
+#define PORT_QM_MIN_RESV_SPACE_M (BIT(11) - 1)
+
+#define REG_PORT_QM_WATER_MARK__4 0x0A0C
+
+#define PORT_QM_HI_WATER_MARK_S 16
+#define PORT_QM_LO_WATER_MARK_S 0
+#define PORT_QM_WATER_MARK_M (BIT(11) - 1)
+
+#define REG_PORT_QM_TX_CNT_0__4 0x0A10
+
+#define PORT_QM_TX_CNT_USED_S 0
+#define PORT_QM_TX_CNT_M (BIT(11) - 1)
+
+#define REG_PORT_QM_TX_CNT_1__4 0x0A14
+
+#define PORT_QM_TX_CNT_CALCULATED_S 16
+#define PORT_QM_TX_CNT_AVAIL_S 0
+
+/* B - LUE */
+#define REG_PORT_LUE_CTRL 0x0B00
+
+#define PORT_VLAN_LOOKUP_VID_0 BIT(7)
+#define PORT_INGRESS_FILTER BIT(6)
+#define PORT_DISCARD_NON_VID BIT(5)
+#define PORT_MAC_BASED_802_1X BIT(4)
+#define PORT_SRC_ADDR_FILTER BIT(3)
+
+#define REG_PORT_LUE_MSTP_INDEX 0x0B01
+
+#define REG_PORT_LUE_MSTP_STATE 0x0B04
+
+#define PORT_TX_ENABLE BIT(2)
+#define PORT_RX_ENABLE BIT(1)
+#define PORT_LEARN_DISABLE BIT(0)
+
+/* C - PTP */
+
+#define REG_PTP_PORT_RX_DELAY__2 0x0C00
+#define REG_PTP_PORT_TX_DELAY__2 0x0C02
+#define REG_PTP_PORT_ASYM_DELAY__2 0x0C04
+
+#define REG_PTP_PORT_XDELAY_TS 0x0C08
+#define REG_PTP_PORT_XDELAY_TS_H 0x0C08
+#define REG_PTP_PORT_XDELAY_TS_L 0x0C0A
+
+#define REG_PTP_PORT_SYNC_TS 0x0C0C
+#define REG_PTP_PORT_SYNC_TS_H 0x0C0C
+#define REG_PTP_PORT_SYNC_TS_L 0x0C0E
+
+#define REG_PTP_PORT_PDRESP_TS 0x0C10
+#define REG_PTP_PORT_PDRESP_TS_H 0x0C10
+#define REG_PTP_PORT_PDRESP_TS_L 0x0C12
+
+#define REG_PTP_PORT_TX_INT_STATUS__2 0x0C14
+#define REG_PTP_PORT_TX_INT_ENABLE__2 0x0C16
+
+#define PTP_PORT_SYNC_INT BIT(15)
+#define PTP_PORT_XDELAY_REQ_INT BIT(14)
+#define PTP_PORT_PDELAY_RESP_INT BIT(13)
+
+#define REG_PTP_PORT_LINK_DELAY__4 0x0C18
+
+#define PRIO_QUEUES 4
+#define RX_PRIO_QUEUES 8
+
+#define KS_PRIO_IN_REG 2
+
+#define TOTAL_PORT_NUM 7
+
+#define KSZ9477_COUNTER_NUM 0x20
+#define TOTAL_KSZ9477_COUNTER_NUM (KSZ9477_COUNTER_NUM + 2 + 2)
+
+#define SWITCH_COUNTER_NUM KSZ9477_COUNTER_NUM
+#define TOTAL_SWITCH_COUNTER_NUM TOTAL_KSZ9477_COUNTER_NUM
+
+#define P_BCAST_STORM_CTRL REG_PORT_MAC_CTRL_0
+#define P_PRIO_CTRL REG_PORT_MRI_PRIO_CTRL
+#define P_MIRROR_CTRL REG_PORT_MRI_MIRROR_CTRL
+#define P_STP_CTRL REG_PORT_LUE_MSTP_STATE
+#define P_PHY_CTRL REG_PORT_PHY_CTRL
+#define P_NEG_RESTART_CTRL REG_PORT_PHY_CTRL
+#define P_LINK_STATUS REG_PORT_PHY_STATUS
+#define P_SPEED_STATUS REG_PORT_PHY_PHY_CTRL
+#define P_RATE_LIMIT_CTRL REG_PORT_MAC_IN_RATE_LIMIT
+
+#define S_LINK_AGING_CTRL REG_SW_LUE_CTRL_1
+#define S_MIRROR_CTRL REG_SW_MRI_CTRL_0
+#define S_REPLACE_VID_CTRL REG_SW_MAC_CTRL_2
+#define S_802_1P_PRIO_CTRL REG_SW_MAC_802_1P_MAP_0
+#define S_TOS_PRIO_CTRL REG_SW_MAC_TOS_PRIO_0
+#define S_FLUSH_TABLE_CTRL REG_SW_LUE_CTRL_1
+
+#define SW_FLUSH_DYN_MAC_TABLE SW_FLUSH_MSTP_TABLE
+
+#define MAX_TIMESTAMP_UNIT 2
+#define MAX_TRIG_UNIT 3
+#define MAX_TIMESTAMP_EVENT_UNIT 8
+#define MAX_GPIO 4
+
+#define PTP_TRIG_UNIT_M (BIT(MAX_TRIG_UNIT) - 1)
+#define PTP_TS_UNIT_M (BIT(MAX_TIMESTAMP_UNIT) - 1)
+
+/* Driver set switch broadcast storm protection at 10% rate. */
+#define BROADCAST_STORM_PROT_RATE 10
+
+/* 148,800 frames * 67 ms / 100 */
+#define BROADCAST_STORM_VALUE 9969
+
+#endif /* KSZ9477_REGS_H */
--- /dev/null
+/*
+ * Microchip switch driver main logic
+ *
+ * Copyright (C) 2017
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/microchip-ksz.h>
+#include <linux/phy.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <net/dsa.h>
+#include <net/switchdev.h>
+
+#include "ksz_priv.h"
+
+static const struct {
+ int index;
+ char string[ETH_GSTRING_LEN];
+} mib_names[TOTAL_SWITCH_COUNTER_NUM] = {
+ { 0x00, "rx_hi" },
+ { 0x01, "rx_undersize" },
+ { 0x02, "rx_fragments" },
+ { 0x03, "rx_oversize" },
+ { 0x04, "rx_jabbers" },
+ { 0x05, "rx_symbol_err" },
+ { 0x06, "rx_crc_err" },
+ { 0x07, "rx_align_err" },
+ { 0x08, "rx_mac_ctrl" },
+ { 0x09, "rx_pause" },
+ { 0x0A, "rx_bcast" },
+ { 0x0B, "rx_mcast" },
+ { 0x0C, "rx_ucast" },
+ { 0x0D, "rx_64_or_less" },
+ { 0x0E, "rx_65_127" },
+ { 0x0F, "rx_128_255" },
+ { 0x10, "rx_256_511" },
+ { 0x11, "rx_512_1023" },
+ { 0x12, "rx_1024_1522" },
+ { 0x13, "rx_1523_2000" },
+ { 0x14, "rx_2001" },
+ { 0x15, "tx_hi" },
+ { 0x16, "tx_late_col" },
+ { 0x17, "tx_pause" },
+ { 0x18, "tx_bcast" },
+ { 0x19, "tx_mcast" },
+ { 0x1A, "tx_ucast" },
+ { 0x1B, "tx_deferred" },
+ { 0x1C, "tx_total_col" },
+ { 0x1D, "tx_exc_col" },
+ { 0x1E, "tx_single_col" },
+ { 0x1F, "tx_mult_col" },
+ { 0x80, "rx_total" },
+ { 0x81, "tx_total" },
+ { 0x82, "rx_discards" },
+ { 0x83, "tx_discards" },
+};
+
+static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
+{
+ u8 data;
+
+ ksz_read8(dev, addr, &data);
+ if (set)
+ data |= bits;
+ else
+ data &= ~bits;
+ ksz_write8(dev, addr, data);
+}
+
+static void ksz_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set)
+{
+ u32 data;
+
+ ksz_read32(dev, addr, &data);
+ if (set)
+ data |= bits;
+ else
+ data &= ~bits;
+ ksz_write32(dev, addr, data);
+}
+
+static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
+ bool set)
+{
+ u32 addr;
+ u8 data;
+
+ addr = PORT_CTRL_ADDR(port, offset);
+ ksz_read8(dev, addr, &data);
+
+ if (set)
+ data |= bits;
+ else
+ data &= ~bits;
+
+ ksz_write8(dev, addr, data);
+}
+
+static void ksz_port_cfg32(struct ksz_device *dev, int port, int offset,
+ u32 bits, bool set)
+{
+ u32 addr;
+ u32 data;
+
+ addr = PORT_CTRL_ADDR(port, offset);
+ ksz_read32(dev, addr, &data);
+
+ if (set)
+ data |= bits;
+ else
+ data &= ~bits;
+
+ ksz_write32(dev, addr, data);
+}
+
+static int wait_vlan_ctrl_ready(struct ksz_device *dev, u32 waiton, int timeout)
+{
+ u8 data;
+
+ do {
+ ksz_read8(dev, REG_SW_VLAN_CTRL, &data);
+ if (!(data & waiton))
+ break;
+ usleep_range(1, 10);
+ } while (timeout-- > 0);
+
+ if (timeout <= 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int get_vlan_table(struct dsa_switch *ds, u16 vid, u32 *vlan_table)
+{
+ struct ksz_device *dev = ds->priv;
+ int ret;
+
+ mutex_lock(&dev->vlan_mutex);
+
+ ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
+ ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START);
+
+ /* wait to be cleared */
+ ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
+ if (ret < 0) {
+ dev_dbg(dev->dev, "Failed to read vlan table\n");
+ goto exit;
+ }
+
+ ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]);
+ ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]);
+ ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]);
+
+ ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
+
+exit:
+ mutex_unlock(&dev->vlan_mutex);
+
+ return ret;
+}
+
+static int set_vlan_table(struct dsa_switch *ds, u16 vid, u32 *vlan_table)
+{
+ struct ksz_device *dev = ds->priv;
+ int ret;
+
+ mutex_lock(&dev->vlan_mutex);
+
+ ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]);
+ ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]);
+ ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]);
+
+ ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
+ ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE);
+
+ /* wait to be cleared */
+ ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
+ if (ret < 0) {
+ dev_dbg(dev->dev, "Failed to write vlan table\n");
+ goto exit;
+ }
+
+ ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
+
+ /* update vlan cache table */
+ dev->vlan_cache[vid].table[0] = vlan_table[0];
+ dev->vlan_cache[vid].table[1] = vlan_table[1];
+ dev->vlan_cache[vid].table[2] = vlan_table[2];
+
+exit:
+ mutex_unlock(&dev->vlan_mutex);
+
+ return ret;
+}
+
+static void read_table(struct dsa_switch *ds, u32 *table)
+{
+ struct ksz_device *dev = ds->priv;
+
+ ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]);
+ ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]);
+ ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]);
+ ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]);
+}
+
+static void write_table(struct dsa_switch *ds, u32 *table)
+{
+ struct ksz_device *dev = ds->priv;
+
+ ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]);
+ ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]);
+ ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]);
+ ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]);
+}
+
+static int wait_alu_ready(struct ksz_device *dev, u32 waiton, int timeout)
+{
+ u32 data;
+
+ do {
+ ksz_read32(dev, REG_SW_ALU_CTRL__4, &data);
+ if (!(data & waiton))
+ break;
+ usleep_range(1, 10);
+ } while (timeout-- > 0);
+
+ if (timeout <= 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int wait_alu_sta_ready(struct ksz_device *dev, u32 waiton, int timeout)
+{
+ u32 data;
+
+ do {
+ ksz_read32(dev, REG_SW_ALU_STAT_CTRL__4, &data);
+ if (!(data & waiton))
+ break;
+ usleep_range(1, 10);
+ } while (timeout-- > 0);
+
+ if (timeout <= 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int ksz_reset_switch(struct dsa_switch *ds)
+{
+ struct ksz_device *dev = ds->priv;
+ u8 data8;
+ u16 data16;
+ u32 data32;
+
+ /* reset switch */
+ ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
+
+ /* turn off SPI DO Edge select */
+ ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
+ data8 &= ~SPI_AUTO_EDGE_DETECTION;
+ ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
+
+ /* default configuration */
+ ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
+ data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING |
+ SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE;
+ ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
+
+ /* disable interrupts */
+ ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
+ ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
+ ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
+
+ /* set broadcast storm protection 10% rate */
+ ksz_read16(dev, REG_SW_MAC_CTRL_2, &data16);
+ data16 &= ~BROADCAST_STORM_RATE;
+ data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100;
+ ksz_write16(dev, REG_SW_MAC_CTRL_2, data16);
+
+ return 0;
+}
+
+static void port_setup(struct ksz_device *dev, int port, bool cpu_port)
+{
+ u8 data8;
+ u16 data16;
+
+ /* enable tag tail for host port */
+ if (cpu_port)
+ ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
+ true);
+
+ ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
+
+ /* set back pressure */
+ ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true);
+
+ /* set flow control */
+ ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
+ PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, true);
+
+ /* enable broadcast storm limit */
+ ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
+
+ /* disable DiffServ priority */
+ ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false);
+
+ /* replace priority */
+ ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
+ false);
+ ksz_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
+ MTI_PVID_REPLACE, false);
+
+ /* enable 802.1p priority */
+ ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
+
+ /* configure MAC to 1G & RGMII mode */
+ ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
+ data8 |= PORT_RGMII_ID_EG_ENABLE;
+ data8 &= ~PORT_MII_NOT_1GBIT;
+ data8 &= ~PORT_MII_SEL_M;
+ data8 |= PORT_RGMII_SEL;
+ ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
+
+ /* clear pending interrupts */
+ ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16);
+}
+
+static void ksz_config_cpu_port(struct dsa_switch *ds)
+{
+ struct ksz_device *dev = ds->priv;
+ int i;
+
+ ds->num_ports = dev->port_cnt;
+
+ for (i = 0; i < ds->num_ports; i++) {
+ if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) {
+ dev->cpu_port = i;
+
+ /* enable cpu port */
+ port_setup(dev, i, true);
+ }
+ }
+}
+
+static int ksz_setup(struct dsa_switch *ds)
+{
+ struct ksz_device *dev = ds->priv;
+ int ret = 0;
+
+ dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
+ dev->num_vlans, GFP_KERNEL);
+ if (!dev->vlan_cache)
+ return -ENOMEM;
+
+ ret = ksz_reset_switch(ds);
+ if (ret) {
+ dev_err(ds->dev, "failed to reset switch\n");
+ return ret;
+ }
+
+ /* accept packet up to 2000bytes */
+ ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true);
+
+ ksz_config_cpu_port(ds);
+
+ ksz_cfg(dev, REG_SW_MAC_CTRL_1, MULTICAST_STORM_DISABLE, true);
+
+ /* queue based egress rate limit */
+ ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true);
+
+ /* start switch */
+ ksz_cfg(dev, REG_SW_OPERATION, SW_START, true);
+
+ return 0;
+}
+
+static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds)
+{
+ return DSA_TAG_PROTO_KSZ;
+}
+
+static int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg)
+{
+ struct ksz_device *dev = ds->priv;
+ u16 val = 0;
+
+ ksz_pread16(dev, addr, 0x100 + (reg << 1), &val);
+
+ return val;
+}
+
+static int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
+{
+ struct ksz_device *dev = ds->priv;
+
+ ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
+
+ return 0;
+}
+
+static int ksz_enable_port(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct ksz_device *dev = ds->priv;
+
+ /* setup slave port */
+ port_setup(dev, port, false);
+
+ return 0;
+}
+
+static void ksz_disable_port(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct ksz_device *dev = ds->priv;
+
+ /* there is no port disable */
+ ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, true);
+}
+
+static int ksz_sset_count(struct dsa_switch *ds)
+{
+ return TOTAL_SWITCH_COUNTER_NUM;
+}
+
+static void ksz_get_strings(struct dsa_switch *ds, int port, uint8_t *buf)
+{
+ int i;
+
+ for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
+ memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string,
+ ETH_GSTRING_LEN);
+ }
+}
+
+static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port,
+ uint64_t *buf)
+{
+ struct ksz_device *dev = ds->priv;
+ int i;
+ u32 data;
+ int timeout;
+
+ mutex_lock(&dev->stats_mutex);
+
+ for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
+ data = MIB_COUNTER_READ;
+ data |= ((mib_names[i].index & 0xFF) << MIB_COUNTER_INDEX_S);
+ ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
+
+ timeout = 1000;
+ do {
+ ksz_pread32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
+ &data);
+ usleep_range(1, 10);
+ if (!(data & MIB_COUNTER_READ))
+ break;
+ } while (timeout-- > 0);
+
+ /* failed to read MIB. get out of loop */
+ if (!timeout) {
+ dev_dbg(dev->dev, "Failed to get MIB\n");
+ break;
+ }
+
+ /* count resets upon read */
+ ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
+
+ dev->mib_value[i] += (uint64_t)data;
+ buf[i] = dev->mib_value[i];
+ }
+
+ mutex_unlock(&dev->stats_mutex);
+}
+
+static void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
+{
+ struct ksz_device *dev = ds->priv;
+ u8 data;
+
+ ksz_pread8(dev, port, P_STP_CTRL, &data);
+ data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ data |= PORT_LEARN_DISABLE;
+ break;
+ case BR_STATE_LISTENING:
+ data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+ break;
+ case BR_STATE_LEARNING:
+ data |= PORT_RX_ENABLE;
+ break;
+ case BR_STATE_FORWARDING:
+ data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
+ break;
+ case BR_STATE_BLOCKING:
+ data |= PORT_LEARN_DISABLE;
+ break;
+ default:
+ dev_err(ds->dev, "invalid STP state: %d\n", state);
+ return;
+ }
+
+ ksz_pwrite8(dev, port, P_STP_CTRL, data);
+}
+
+static void ksz_port_fast_age(struct dsa_switch *ds, int port)
+{
+ struct ksz_device *dev = ds->priv;
+ u8 data8;
+
+ ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
+ data8 |= SW_FAST_AGING;
+ ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
+
+ data8 &= ~SW_FAST_AGING;
+ ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
+}
+
+static int ksz_port_vlan_filtering(struct dsa_switch *ds, int port, bool flag)
+{
+ struct ksz_device *dev = ds->priv;
+
+ if (flag) {
+ ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
+ PORT_VLAN_LOOKUP_VID_0, true);
+ ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, true);
+ ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true);
+ } else {
+ ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false);
+ ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, false);
+ ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
+ PORT_VLAN_LOOKUP_VID_0, false);
+ }
+
+ return 0;
+}
+
+static int ksz_port_vlan_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct switchdev_trans *trans)
+{
+ /* nothing needed */
+
+ return 0;
+}
+
+static void ksz_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct switchdev_trans *trans)
+{
+ struct ksz_device *dev = ds->priv;
+ u32 vlan_table[3];
+ u16 vid;
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+ if (get_vlan_table(ds, vid, vlan_table)) {
+ dev_dbg(dev->dev, "Failed to get vlan table\n");
+ return;
+ }
+
+ vlan_table[0] = VLAN_VALID | (vid & VLAN_FID_M);
+ if (untagged)
+ vlan_table[1] |= BIT(port);
+ else
+ vlan_table[1] &= ~BIT(port);
+ vlan_table[1] &= ~(BIT(dev->cpu_port));
+
+ vlan_table[2] |= BIT(port) | BIT(dev->cpu_port);
+
+ if (set_vlan_table(ds, vid, vlan_table)) {
+ dev_dbg(dev->dev, "Failed to set vlan table\n");
+ return;
+ }
+
+ /* change PVID */
+ if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
+ ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vid);
+ }
+}
+
+static int ksz_port_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct ksz_device *dev = ds->priv;
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ u32 vlan_table[3];
+ u16 vid;
+ u16 pvid;
+
+ ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid);
+ pvid = pvid & 0xFFF;
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+ if (get_vlan_table(ds, vid, vlan_table)) {
+ dev_dbg(dev->dev, "Failed to get vlan table\n");
+ return -ETIMEDOUT;
+ }
+
+ vlan_table[2] &= ~BIT(port);
+
+ if (pvid == vid)
+ pvid = 1;
+
+ if (untagged)
+ vlan_table[1] &= ~BIT(port);
+
+ if (set_vlan_table(ds, vid, vlan_table)) {
+ dev_dbg(dev->dev, "Failed to set vlan table\n");
+ return -ETIMEDOUT;
+ }
+ }
+
+ ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid);
+
+ return 0;
+}
+
+static int ksz_port_vlan_dump(struct dsa_switch *ds, int port,
+ struct switchdev_obj_port_vlan *vlan,
+ switchdev_obj_dump_cb_t *cb)
+{
+ struct ksz_device *dev = ds->priv;
+ u16 vid;
+ u16 data;
+ struct vlan_table *vlan_cache;
+ int err = 0;
+
+ mutex_lock(&dev->vlan_mutex);
+
+ /* use dev->vlan_cache due to lack of searching valid vlan entry */
+ for (vid = vlan->vid_begin; vid < dev->num_vlans; vid++) {
+ vlan_cache = &dev->vlan_cache[vid];
+
+ if (!(vlan_cache->table[0] & VLAN_VALID))
+ continue;
+
+ vlan->vid_begin = vid;
+ vlan->vid_end = vid;
+ vlan->flags = 0;
+ if (vlan_cache->table[2] & BIT(port)) {
+ if (vlan_cache->table[1] & BIT(port))
+ vlan->flags |= BRIDGE_VLAN_INFO_UNTAGGED;
+ ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &data);
+ if (vid == (data & 0xFFFFF))
+ vlan->flags |= BRIDGE_VLAN_INFO_PVID;
+
+ err = cb(&vlan->obj);
+ if (err)
+ break;
+ }
+ }
+
+ mutex_unlock(&dev->vlan_mutex);
+
+ return err;
+}
+
+static int ksz_port_fdb_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_fdb *fdb,
+ struct switchdev_trans *trans)
+{
+ /* nothing needed */
+
+ return 0;
+}
+
+struct alu_struct {
+ /* entry 1 */
+ u8 is_static:1;
+ u8 is_src_filter:1;
+ u8 is_dst_filter:1;
+ u8 prio_age:3;
+ u32 _reserv_0_1:23;
+ u8 mstp:3;
+ /* entry 2 */
+ u8 is_override:1;
+ u8 is_use_fid:1;
+ u32 _reserv_1_1:23;
+ u8 port_forward:7;
+ /* entry 3 & 4*/
+ u32 _reserv_2_1:9;
+ u8 fid:7;
+ u8 mac[ETH_ALEN];
+};
+
+static void ksz_port_fdb_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_fdb *fdb,
+ struct switchdev_trans *trans)
+{
+ struct ksz_device *dev = ds->priv;
+ u32 alu_table[4];
+ u32 data;
+
+ mutex_lock(&dev->alu_mutex);
+
+ /* find any entry with mac & vid */
+ data = fdb->vid << ALU_FID_INDEX_S;
+ data |= ((fdb->addr[0] << 8) | fdb->addr[1]);
+ ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
+
+ data = ((fdb->addr[2] << 24) | (fdb->addr[3] << 16));
+ data |= ((fdb->addr[4] << 8) | fdb->addr[5]);
+ ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
+
+ /* start read operation */
+ ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
+
+ /* wait to be finished */
+ if (wait_alu_ready(dev, ALU_START, 1000) < 0) {
+ dev_dbg(dev->dev, "Failed to read ALU\n");
+ goto exit;
+ }
+
+ /* read ALU entry */
+ read_table(ds, alu_table);
+
+ /* update ALU entry */
+ alu_table[0] = ALU_V_STATIC_VALID;
+ alu_table[1] |= BIT(port);
+ if (fdb->vid)
+ alu_table[1] |= ALU_V_USE_FID;
+ alu_table[2] = (fdb->vid << ALU_V_FID_S);
+ alu_table[2] |= ((fdb->addr[0] << 8) | fdb->addr[1]);
+ alu_table[3] = ((fdb->addr[2] << 24) | (fdb->addr[3] << 16));
+ alu_table[3] |= ((fdb->addr[4] << 8) | fdb->addr[5]);
+
+ write_table(ds, alu_table);
+
+ ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
+
+ /* wait to be finished */
+ if (wait_alu_ready(dev, ALU_START, 1000) < 0)
+ dev_dbg(dev->dev, "Failed to read ALU\n");
+
+exit:
+ mutex_unlock(&dev->alu_mutex);
+}
+
+static int ksz_port_fdb_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_fdb *fdb)
+{
+ struct ksz_device *dev = ds->priv;
+ u32 alu_table[4];
+ u32 data;
+ int ret = 0;
+
+ mutex_lock(&dev->alu_mutex);
+
+ /* read any entry with mac & vid */
+ data = fdb->vid << ALU_FID_INDEX_S;
+ data |= ((fdb->addr[0] << 8) | fdb->addr[1]);
+ ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
+
+ data = ((fdb->addr[2] << 24) | (fdb->addr[3] << 16));
+ data |= ((fdb->addr[4] << 8) | fdb->addr[5]);
+ ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
+
+ /* start read operation */
+ ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
+
+ /* wait to be finished */
+ ret = wait_alu_ready(dev, ALU_START, 1000);
+ if (ret < 0) {
+ dev_dbg(dev->dev, "Failed to read ALU\n");
+ goto exit;
+ }
+
+ ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]);
+ if (alu_table[0] & ALU_V_STATIC_VALID) {
+ ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]);
+ ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]);
+ ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]);
+
+ /* clear forwarding port */
+ alu_table[2] &= ~BIT(port);
+
+ /* if there is no port to forward, clear table */
+ if ((alu_table[2] & ALU_V_PORT_MAP) == 0) {
+ alu_table[0] = 0;
+ alu_table[1] = 0;
+ alu_table[2] = 0;
+ alu_table[3] = 0;
+ }
+ } else {
+ alu_table[0] = 0;
+ alu_table[1] = 0;
+ alu_table[2] = 0;
+ alu_table[3] = 0;
+ }
+
+ write_table(ds, alu_table);
+
+ ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
+
+ /* wait to be finished */
+ ret = wait_alu_ready(dev, ALU_START, 1000);
+ if (ret < 0)
+ dev_dbg(dev->dev, "Failed to write ALU\n");
+
+exit:
+ mutex_unlock(&dev->alu_mutex);
+
+ return ret;
+}
+
+static void convert_alu(struct alu_struct *alu, u32 *alu_table)
+{
+ alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID);
+ alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER);
+ alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER);
+ alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) &
+ ALU_V_PRIO_AGE_CNT_M;
+ alu->mstp = alu_table[0] & ALU_V_MSTP_M;
+
+ alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE);
+ alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID);
+ alu->port_forward = alu_table[1] & ALU_V_PORT_MAP;
+
+ alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M;
+
+ alu->mac[0] = (alu_table[2] >> 8) & 0xFF;
+ alu->mac[1] = alu_table[2] & 0xFF;
+ alu->mac[2] = (alu_table[3] >> 24) & 0xFF;
+ alu->mac[3] = (alu_table[3] >> 16) & 0xFF;
+ alu->mac[4] = (alu_table[3] >> 8) & 0xFF;
+ alu->mac[5] = alu_table[3] & 0xFF;
+}
+
+static int ksz_port_fdb_dump(struct dsa_switch *ds, int port,
+ struct switchdev_obj_port_fdb *fdb,
+ switchdev_obj_dump_cb_t *cb)
+{
+ struct ksz_device *dev = ds->priv;
+ int ret = 0;
+ u32 data;
+ u32 alu_table[4];
+ struct alu_struct alu;
+ int timeout;
+
+ mutex_lock(&dev->alu_mutex);
+
+ /* start ALU search */
+ ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH);
+
+ do {
+ timeout = 1000;
+ do {
+ ksz_read32(dev, REG_SW_ALU_CTRL__4, &data);
+ if ((data & ALU_VALID) || !(data & ALU_START))
+ break;
+ usleep_range(1, 10);
+ } while (timeout-- > 0);
+
+ if (!timeout) {
+ dev_dbg(dev->dev, "Failed to search ALU\n");
+ ret = -ETIMEDOUT;
+ goto exit;
+ }
+
+ /* read ALU table */
+ read_table(ds, alu_table);
+
+ convert_alu(&alu, alu_table);
+
+ if (alu.port_forward & BIT(port)) {
+ fdb->vid = alu.fid;
+ if (alu.is_static)
+ fdb->ndm_state = NUD_NOARP;
+ else
+ fdb->ndm_state = NUD_REACHABLE;
+ ether_addr_copy(fdb->addr, alu.mac);
+
+ ret = cb(&fdb->obj);
+ if (ret)
+ goto exit;
+ }
+ } while (data & ALU_START);
+
+exit:
+
+ /* stop ALU search */
+ ksz_write32(dev, REG_SW_ALU_CTRL__4, 0);
+
+ mutex_unlock(&dev->alu_mutex);
+
+ return ret;
+}
+
+static int ksz_port_mdb_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct switchdev_trans *trans)
+{
+ /* nothing to do */
+ return 0;
+}
+
+static void ksz_port_mdb_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct switchdev_trans *trans)
+{
+ struct ksz_device *dev = ds->priv;
+ u32 static_table[4];
+ u32 data;
+ int index;
+ u32 mac_hi, mac_lo;
+
+ mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
+ mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
+ mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+
+ mutex_lock(&dev->alu_mutex);
+
+ for (index = 0; index < dev->num_statics; index++) {
+ /* find empty slot first */
+ data = (index << ALU_STAT_INDEX_S) |
+ ALU_STAT_READ | ALU_STAT_START;
+ ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+ /* wait to be finished */
+ if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0) {
+ dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+ goto exit;
+ }
+
+ /* read ALU static table */
+ read_table(ds, static_table);
+
+ if (static_table[0] & ALU_V_STATIC_VALID) {
+ /* check this has same vid & mac address */
+ if (((static_table[2] >> ALU_V_FID_S) == (mdb->vid)) &&
+ ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
+ (static_table[3] == mac_lo)) {
+ /* found matching one */
+ break;
+ }
+ } else {
+ /* found empty one */
+ break;
+ }
+ }
+
+ /* no available entry */
+ if (index == dev->num_statics)
+ goto exit;
+
+ /* add entry */
+ static_table[0] = ALU_V_STATIC_VALID;
+ static_table[1] |= BIT(port);
+ if (mdb->vid)
+ static_table[1] |= ALU_V_USE_FID;
+ static_table[2] = (mdb->vid << ALU_V_FID_S);
+ static_table[2] |= mac_hi;
+ static_table[3] = mac_lo;
+
+ write_table(ds, static_table);
+
+ data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
+ ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+ /* wait to be finished */
+ if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0)
+ dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+
+exit:
+ mutex_unlock(&dev->alu_mutex);
+}
+
+static int ksz_port_mdb_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb)
+{
+ struct ksz_device *dev = ds->priv;
+ u32 static_table[4];
+ u32 data;
+ int index;
+ int ret = 0;
+ u32 mac_hi, mac_lo;
+
+ mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
+ mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
+ mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+
+ mutex_lock(&dev->alu_mutex);
+
+ for (index = 0; index < dev->num_statics; index++) {
+ /* find empty slot first */
+ data = (index << ALU_STAT_INDEX_S) |
+ ALU_STAT_READ | ALU_STAT_START;
+ ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+ /* wait to be finished */
+ ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
+ if (ret < 0) {
+ dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+ goto exit;
+ }
+
+ /* read ALU static table */
+ read_table(ds, static_table);
+
+ if (static_table[0] & ALU_V_STATIC_VALID) {
+ /* check this has same vid & mac address */
+
+ if (((static_table[2] >> ALU_V_FID_S) == (mdb->vid)) &&
+ ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
+ (static_table[3] == mac_lo)) {
+ /* found matching one */
+ break;
+ }
+ }
+ }
+
+ /* no available entry */
+ if (index == dev->num_statics) {
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ /* clear port */
+ static_table[1] &= ~BIT(port);
+
+ if ((static_table[1] & ALU_V_PORT_MAP) == 0) {
+ /* delete entry */
+ static_table[0] = 0;
+ static_table[1] = 0;
+ static_table[2] = 0;
+ static_table[3] = 0;
+ }
+
+ write_table(ds, static_table);
+
+ data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
+ ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+ /* wait to be finished */
+ ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
+ if (ret < 0)
+ dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+
+exit:
+ mutex_unlock(&dev->alu_mutex);
+
+ return ret;
+}
+
+static int ksz_port_mdb_dump(struct dsa_switch *ds, int port,
+ struct switchdev_obj_port_mdb *mdb,
+ switchdev_obj_dump_cb_t *cb)
+{
+ /* this is not called by switch layer */
+ return 0;
+}
+
+static int ksz_port_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror,
+ bool ingress)
+{
+ struct ksz_device *dev = ds->priv;
+
+ if (ingress)
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
+ else
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
+
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
+
+ /* configure mirror port */
+ ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+ PORT_MIRROR_SNIFFER, true);
+
+ ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+
+ return 0;
+}
+
+static void ksz_port_mirror_del(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror)
+{
+ struct ksz_device *dev = ds->priv;
+ u8 data;
+
+ if (mirror->ingress)
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
+ else
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
+
+ ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
+
+ if (!(data & (PORT_MIRROR_RX | PORT_MIRROR_TX)))
+ ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+ PORT_MIRROR_SNIFFER, false);
+}
+
+static const struct dsa_switch_ops ksz_switch_ops = {
+ .get_tag_protocol = ksz_get_tag_protocol,
+ .setup = ksz_setup,
+ .phy_read = ksz_phy_read16,
+ .phy_write = ksz_phy_write16,
+ .port_enable = ksz_enable_port,
+ .port_disable = ksz_disable_port,
+ .get_strings = ksz_get_strings,
+ .get_ethtool_stats = ksz_get_ethtool_stats,
+ .get_sset_count = ksz_sset_count,
+ .port_stp_state_set = ksz_port_stp_state_set,
+ .port_fast_age = ksz_port_fast_age,
+ .port_vlan_filtering = ksz_port_vlan_filtering,
+ .port_vlan_prepare = ksz_port_vlan_prepare,
+ .port_vlan_add = ksz_port_vlan_add,
+ .port_vlan_del = ksz_port_vlan_del,
+ .port_vlan_dump = ksz_port_vlan_dump,
+ .port_fdb_prepare = ksz_port_fdb_prepare,
+ .port_fdb_dump = ksz_port_fdb_dump,
+ .port_fdb_add = ksz_port_fdb_add,
+ .port_fdb_del = ksz_port_fdb_del,
+ .port_mdb_prepare = ksz_port_mdb_prepare,
+ .port_mdb_add = ksz_port_mdb_add,
+ .port_mdb_del = ksz_port_mdb_del,
+ .port_mdb_dump = ksz_port_mdb_dump,
+ .port_mirror_add = ksz_port_mirror_add,
+ .port_mirror_del = ksz_port_mirror_del,
+};
+
+struct ksz_chip_data {
+ u32 chip_id;
+ const char *dev_name;
+ int num_vlans;
+ int num_alus;
+ int num_statics;
+ int cpu_ports;
+ int port_cnt;
+};
+
+static const struct ksz_chip_data ksz_switch_chips[] = {
+ {
+ .chip_id = 0x00947700,
+ .dev_name = "KSZ9477",
+ .num_vlans = 4096,
+ .num_alus = 4096,
+ .num_statics = 16,
+ .cpu_ports = 0x7F, /* can be configured as cpu port */
+ .port_cnt = 7, /* total physical port count */
+ },
+};
+
+static int ksz_switch_init(struct ksz_device *dev)
+{
+ int i;
+
+ mutex_init(&dev->reg_mutex);
+ mutex_init(&dev->stats_mutex);
+ mutex_init(&dev->alu_mutex);
+ mutex_init(&dev->vlan_mutex);
+
+ dev->ds->ops = &ksz_switch_ops;
+
+ for (i = 0; i < ARRAY_SIZE(ksz_switch_chips); i++) {
+ const struct ksz_chip_data *chip = &ksz_switch_chips[i];
+
+ if (dev->chip_id == chip->chip_id) {
+ dev->name = chip->dev_name;
+ dev->num_vlans = chip->num_vlans;
+ dev->num_alus = chip->num_alus;
+ dev->num_statics = chip->num_statics;
+ dev->port_cnt = chip->port_cnt;
+ dev->cpu_ports = chip->cpu_ports;
+
+ break;
+ }
+ }
+
+ /* no switch found */
+ if (!dev->port_cnt)
+ return -ENODEV;
+
+ return 0;
+}
+
+struct ksz_device *ksz_switch_alloc(struct device *base,
+ const struct ksz_io_ops *ops,
+ void *priv)
+{
+ struct dsa_switch *ds;
+ struct ksz_device *swdev;
+
+ ds = dsa_switch_alloc(base, DSA_MAX_PORTS);
+ if (!ds)
+ return NULL;
+
+ swdev = devm_kzalloc(base, sizeof(*swdev), GFP_KERNEL);
+ if (!swdev)
+ return NULL;
+
+ ds->priv = swdev;
+ swdev->dev = base;
+
+ swdev->ds = ds;
+ swdev->priv = priv;
+ swdev->ops = ops;
+
+ return swdev;
+}
+EXPORT_SYMBOL(ksz_switch_alloc);
+
+int ksz_switch_detect(struct ksz_device *dev)
+{
+ u8 data8;
+ u32 id32;
+ int ret;
+
+ /* turn off SPI DO Edge select */
+ ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
+ if (ret)
+ return ret;
+
+ data8 &= ~SPI_AUTO_EDGE_DETECTION;
+ ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
+ if (ret)
+ return ret;
+
+ /* read chip id */
+ ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32);
+ if (ret)
+ return ret;
+
+ dev->chip_id = id32;
+
+ return 0;
+}
+EXPORT_SYMBOL(ksz_switch_detect);
+
+int ksz_switch_register(struct ksz_device *dev)
+{
+ int ret;
+
+ if (dev->pdata)
+ dev->chip_id = dev->pdata->chip_id;
+
+ if (ksz_switch_detect(dev))
+ return -EINVAL;
+
+ ret = ksz_switch_init(dev);
+ if (ret)
+ return ret;
+
+ return dsa_register_switch(dev->ds);
+}
+EXPORT_SYMBOL(ksz_switch_register);
+
+void ksz_switch_remove(struct ksz_device *dev)
+{
+ dsa_unregister_switch(dev->ds);
+}
+EXPORT_SYMBOL(ksz_switch_remove);
+
+MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>");
+MODULE_DESCRIPTION("Microchip KSZ Series Switch DSA Driver");
+MODULE_LICENSE("GPL");
projects / platform / kernel / linux-rpi.git / commitdiff