ARM: sun5i: a10s: olinuxino micro: Convert to DT label based syntax
authorMaxime Ripard <maxime.ripard@free-electrons.com>
Fri, 30 Jan 2015 15:51:03 +0000 (16:51 +0100)
committerMaxime Ripard <maxime.ripard@free-electrons.com>
Mon, 27 Apr 2015 06:20:20 +0000 (08:20 +0200)
In order to lessen the amount of duplication of the DT tree, ease the
new and follow the trend that prefers to use label based references
when overriding DTSI nodes, convert the board to this syntax

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts

index 2bbc93b..aa88ee8 100644 (file)
                serial2 = &uart3;
        };
 
-       soc@01c00000 {
-               emac: ethernet@01c0b000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&emac_pins_a>;
-                       phy = <&phy1>;
-                       status = "okay";
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins_olinuxino>;
+
+               green {
+                       label = "a10s-olinuxino-micro:green:usr";
+                       gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
                };
+       };
+};
 
-               mdio@01c0b080 {
-                       status = "okay";
+&ehci0 {
+       status = "okay";
+};
 
-                       phy1: ethernet-phy@1 {
-                               reg = <1>;
-                       };
-               };
+&emac {
+       pinctrl-names = "default";
+       pinctrl-0 = <&emac_pins_a>;
+       phy = <&phy1>;
+       status = "okay";
+};
 
-               mmc0: mmc@01c0f000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
-                       vmmc-supply = <&reg_vcc3v3>;
-                       bus-width = <4>;
-                       cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-                       cd-inverted;
-                       status = "okay";
-               };
+&i2c0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c0_pins_a>;
+       status = "okay";
+};
 
-               mmc1: mmc@01c10000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
-                       vmmc-supply = <&reg_vcc3v3>;
-                       bus-width = <4>;
-                       cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
-                       cd-inverted;
-                       status = "okay";
-               };
+&i2c1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c1_pins_a>;
+       status = "okay";
 
-               usbphy: phy@01c13400 {
-                       usb1_vbus-supply = <&reg_usb1_vbus>;
-                       status = "okay";
-               };
+       at24@50 {
+               compatible = "at,24c16";
+               pagesize = <16>;
+               reg = <0x50>;
+               read-only;
+       };
+};
 
-               ehci0: usb@01c14000 {
-                       status = "okay";
-               };
+&i2c2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c2_pins_a>;
+       status = "okay";
+};
 
-               ohci0: usb@01c14400 {
-                       status = "okay";
-               };
+&lradc {
+       vref-supply = <&reg_vcc3v0>;
+       status = "okay";
 
-               pinctrl@01c20800 {
-                       mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
-                               allwinner,pins = "PG1";
-                               allwinner,function = "gpio_in";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-                       };
-
-                       mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
-                               allwinner,pins = "PG13";
-                               allwinner,function = "gpio_in";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-                       };
-
-                       led_pins_olinuxino: led_pins@0 {
-                               allwinner,pins = "PE3";
-                               allwinner,function = "gpio_out";
-                               allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
-                               allwinner,pins = "PB10";
-                               allwinner,function = "gpio_out";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-               };
+       button@191 {
+               label = "Volume Up";
+               linux,code = <KEY_VOLUMEUP>;
+               channel = <0>;
+               voltage = <191274>;
+       };
 
-               lradc: lradc@01c22800 {
-                       vref-supply = <&reg_vcc3v0>;
-                       status = "okay";
-
-                       button@191 {
-                               label = "Volume Up";
-                               linux,code = <KEY_VOLUMEUP>;
-                               channel = <0>;
-                               voltage = <191274>;
-                       };
-
-                       button@392 {
-                               label = "Volume Down";
-                               linux,code = <KEY_VOLUMEDOWN>;
-                               channel = <0>;
-                               voltage = <392644>;
-                       };
-
-                       button@601 {
-                               label = "Menu";
-                               linux,code = <KEY_MENU>;
-                               channel = <0>;
-                               voltage = <601151>;
-                       };
-
-                       button@795 {
-                               label = "Enter";
-                               linux,code = <KEY_ENTER>;
-                               channel = <0>;
-                               voltage = <795090>;
-                       };
-
-                       button@987 {
-                               label = "Home";
-                               linux,code = <KEY_HOMEPAGE>;
-                               channel = <0>;
-                               voltage = <987387>;
-                       };
-               };
+       button@392 {
+               label = "Volume Down";
+               linux,code = <KEY_VOLUMEDOWN>;
+               channel = <0>;
+               voltage = <392644>;
+       };
 
-               uart0: serial@01c28000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uart0_pins_a>;
-                       status = "okay";
-               };
+       button@601 {
+               label = "Menu";
+               linux,code = <KEY_MENU>;
+               channel = <0>;
+               voltage = <601151>;
+       };
 
-               uart2: serial@01c28800 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uart2_pins_a>;
-                       status = "okay";
-               };
+       button@795 {
+               label = "Enter";
+               linux,code = <KEY_ENTER>;
+               channel = <0>;
+               voltage = <795090>;
+       };
 
-               uart3: serial@01c28c00 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uart3_pins_a>;
-                       status = "okay";
-               };
+       button@987 {
+               label = "Home";
+               linux,code = <KEY_HOMEPAGE>;
+               channel = <0>;
+               voltage = <987387>;
+       };
+};
 
-               i2c0: i2c@01c2ac00 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&i2c0_pins_a>;
-                       status = "okay";
-               };
+&mdio {
+       status = "okay";
 
-               i2c1: i2c@01c2b000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&i2c1_pins_a>;
-                       status = "okay";
-
-                       at24@50 {
-                               compatible = "at,24c16";
-                               pagesize = <16>;
-                               reg = <0x50>;
-                               read-only;
-                       };
-               };
+       phy1: ethernet-phy@1 {
+               reg = <1>;
+       };
+};
 
-               i2c2: i2c@01c2b400 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&i2c2_pins_a>;
-                       status = "okay";
-               };
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+       cd-inverted;
+       status = "okay";
+};
+
+&mmc1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+       cd-inverted;
+       status = "okay";
+};
+
+&ohci0 {
+       status = "okay";
+};
+
+&pio {
+       mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
+               allwinner,pins = "PG1";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
        };
 
-       leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_olinuxino>;
+       mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
+               allwinner,pins = "PG13";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       };
 
-               green {
-                       label = "a10s-olinuxino-micro:green:usr";
-                       gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
-                       default-state = "on";
-               };
+       led_pins_olinuxino: led_pins@0 {
+               allwinner,pins = "PE3";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
        };
 
-       reg_usb1_vbus: usb1-vbus {
-               pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
-               gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
-               status = "okay";
+       usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
+               allwinner,pins = "PB10";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
        };
 };
+
+&reg_usb1_vbus {
+       pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
+       gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins_a>;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins_a>;
+       status = "okay";
+};
+
+&uart3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart3_pins_a>;
+       status = "okay";
+};
+
+&usbphy {
+       usb1_vbus-supply = <&reg_usb1_vbus>;
+       status = "okay";
+};
+